symantec SEPM 12.1 db LOG 文件太大的解决办法

sqla000.tmp file is consuming hard drive space

http://www.symantec.com/business/support/index?page=content&id=TECH188303

http://www.symantec.com/connect/forums/sem5log-keeps-growing

http://www.symantec.com/connect/forums/sem5log-growing-huge-size

 

Problem

the sqla000.tmp file, found at \temp\sqla000.tmp is consuming several gigabytes of hard drive space.

Error

No error but the size of this file is larger than it should be and is consuming hard drive space.  The sqla000.tmp file should typically be only about 200MB in size.

Environment
Windows Server 2008 R2, Symantec Endpoint Protection Manager 12.1 RU1 with an embedded database.

Cause

It appears that a problem with the sem5.log is continually writing extra data to the \temp\sqla000.tmp file

 

Solution

Rebuild the sem5.log:

Stop the Embedded Database service from services.msc
Note: If you did not install SEPM to the default location, change the paths below.

• Go to "C:\Program Files\Symantec\Symantec Endpoint Protection Manager\db\" and rename sem5.log to sem5.log.old 

   (Use "Program Files (x86)" if the SEPM is on a 64-bit system)

• Start a Command Prompt (cmd.exe) and 

  type:

  • CD C:\Program Files\Symantec\Symantec Endpoint Protection Manager\ASA\win32\

• Type the following & press Enter (again, use Program Files (x86) if on a 64-bit system)

  • dbsrv11 -f "C:\Program Files\Symantec\Symantec Endpoint Protection Manager\db\sem5.db"

• Start the Embedded Database service & restart the Symantec Endpoint Protection Manager service.