ccieWireless_Labv3

cisco wireless lab 考试将于2015年9月14日开始

1.0 Configure and Troubleshoot the Network Infrastructure (12%)
1.1 Configure and troubleshoot wired infrastructure to support WLANs
1.1.a VLANs
1.1.b VTP
1.1.c STP
1.1.d Etherchannel
1.1.e HSRP
1.1.f VSS
1.1.g Stacking
1.2 Plan network infrastructure capacity
1.3 Configure and troubleshoot network connectivity for:
1.3.a WLAN clients
1.3.b WLCs
1.3.c Lightweight APs
1.3.d Autonomous APs
1.4 Configure and troubleshoot PoE for APs
1.5 Configure and troubleshoot QoS on the switching infrastructure
1.5.a MQC
1.5.b Mls qos
1.6 Configure and troubleshoot multicast on the switching infrastructure
1.6.a PIM-SM
1.6.b Auto-RP
1.6.c Static-RP
1.6.d IGMP
1.6.e IGMP snooping
1.6.f MLD
1.7 Configure and troubleshoot IPv4 connectivity
1.7.a Subnetting
1.7.b Static routing
1.7.c Basic OSPF
1.7.d Basic EIGRP
1.8 Configure and troubleshoot basic IPv6 connectivity
1.8.a Subnetting
1.8.b Static routing
1.8.c Basic OSPFv3
1.8.d Basic EIGRP address families
1.9 Configure and troubleshoot wired security
1.9.a ACLs (v4/v6)
1.9.b dot1X
1.9.c Port-security
1.9.d SXP, SGT
1.10 Configure and troubleshoot network services
1.10.a DNS
1.10.b DHCPv4 / DHCPv6
1.10.c NTP, SNTP
1.10.d SYSLOG
1.10.e SNMP
1.10.f CDP, LLDP
1.10.g SDG. mDNS
2.0 Configure and Troubleshoot an Autonomous Deployment Model (10%)
2.1 Configuring and troubleshooting different modes and roles
2.1.a Root
2.1.b WGB
2.1.c Bridge
2.2 Configuring and troubleshooting SSID/MBSSID
2.3 Configuring and troubleshooting security
2.3.a L2 security policies
2.3.b Association filters
2.3.c PSPF
2.3.d Local radius
2.3.e dot1x profiles
2.3.f Guest
2.4 Configuring and troubleshooting radio settings
2.5 Configuring and troubleshooting multicast
2.6 Configuring and troubleshooting QoS
3.0 Configure and Troubleshoot a Unified Deployment Model (Centralized) (23%)
3.1 Configuring and controlling management access
3.2 Configuring and troubleshooting interfaces
3.3 Configuring and troubleshooting lightweight APs
3.3.a dot1x
3.3.b LSC
3.3.c AP modes
3.3.d AP authentication / authorization
3.3.e Logging
3.3.f Local / global configuration
3.4 Configuring and troubleshooting high availability and redundancy
3.4.a Clients
3.4.b APs
3.4.c WLCs
3.5 Configuring and troubleshooting wireless segmentation
3.5.a RF profiles
3.5.b AP groups
3.5.c Flexconnect
3.6 Configuring and troubleshooting wireless security policies
3.6.a WLANs
3.6.b L2/L3 security
3.6.c Rogue policies
3.6.d Local EAP
3.6.e Local profiling
3.6.f ACLs
3.6.g Certificates
3.7 Configuring and troubleshooting Flexconnect and Office Extend
3.8 Configuring and troubleshooting Mesh
3.9 Implement RF management
3.9.a Static RF management
3.9.b Automatic RF management
3.9.c CleanAir
3.9.d Data rates
3.10 Configuring and troubleshooting WLC control plane security
3.10.a AAA
3.10.b CPU ACLs
3.10.c Management via wireless interface
3.10.d Management via dynamic interface
3.11 Configuring and troubleshooting mobility
3.11.a L2/L3 roaming
3.11.b Multicast optimization
3.11.c Mobility group scaling
3.11.d Inter-release controller mobility
3.11.e New mobility
3.11.f Mobility anchoring
3.12 Configuring and troubleshooting multicast
4.0 Configure and Troubleshoot a Unified Deployment Model (Converged) (17%)
4.1 Configuring and controlling management access
4.2 Configuring and troubleshooting Interfaces
4.3 Configuring and troubleshooting lightweight APs
4.3.a dot1x
4.3.b AP authentication / authorization
4.3.c Logging
4.3.d Local / global configuration
4.4 Configuring and troubleshooting high availability and redundancy
4.4.a Clients
4.4.b APs
4.4.c WLCs
4.5 Configuring and troubleshooting wireless segmentation
4.5.a RF profiles
4.5.b AP groups
4.6 Configuring and Troubleshooting wireless security policies
4.6.a WLANs
4.6.b L2/L3 security
4.6.c Rogue policies
4.6.d Local EAP
4.6.e ACLs
4.6.f Certificates
4.7 Implement RF management
4.7.a Static RF management
4.7.b Automatic RF management
4.7.c CleanAir
4.7.d Data rates
4.8 Configuring and troubleshooting WLC control plane security
4.8.a AAA
4.8.b Basic control plane policing
4.9 Configuring and troubleshooting mobility
4.9.a L2/L3 roaming
4.9.b Multicast optimization
4.9.c Mobility group scaling
4.9.d Inter-release controller mobility
4.9.e Mobility anchoring
4.9.f SPG
4.9.g MC/MA
4.10 Configuring and troubleshooting multicast
5.0 Configure and Troubleshoot Security & Identity Management (15%)
5.1 Configure and troubleshoot identity management
5.1.a Basic PKI for dot1x and webauth
5.1.b External identity sources (AD, LDAP)
5.2 Configure and troubleshoot AAA policies
5.2.a Client authentication and authorization
5.2.b Management authentication and authorization
5.2.c Client profiling and provisioning
5.2.d RADIUS attributes
5.2.e CoA
5.3 Configure and troubleshoot guest management
5.3.a Local web authentication
5.3.b Central web authentication
5.3.c Basic sponsor policy
6.0 Configure and Troubleshoot Prime Infrastructure and MSE (10%)
6.1 Configure and troubleshoot management access
6.1.a AAA
6.1.b Virtual domain
6.2 Perform basic operations
6.2.a Create and deploy templates
6.2.b Operate maps
6.2.c Import infrastructure devices
6.2.d High availability
6.2.e Audits
6.2.f Client troubleshooting
6.2.g Notification receivers
6.2.h Reports
6.3 Perform maintenance operations
6.3.a Background tasks
6.3.b SW image management
6.4 Security management
6.4.a Understand rogue management
6.4.b Manage alarms and events
6.4.c Understand security index
6.5 Implement and troubleshoot MSE
6.5.a Management access
6.5.b Network services
6.5.b [i] Location
6.5.b [ii] CMX
6.5.b [iii] CleanAir
6.5.b [iv] WIPS
6.5.c NMSP
6.6 Integrate ISE
6.7 Integrate netflow
7.0 Configure and Troubleshoot WLAN media and application services (13%)
7.1 Configure and troubleshoot voice over wireless
7.1.a QoS profiles
7.1.b EDCA
7.1.c WMM
7.1.d BDRL
7.1.e Admission control
7.1.f MQC
7.2 Configuring and troubleshooting video and media
7.2.a Mediastream
7.2.b Multicast-direct
7.2.c Admission control
7.3 Configuring and troubleshooting mDNS
7.3.a mDNS proxy
7.3.b Service discovery
7.3.c Service filtering
7.4 Configuring and troubleshooting AVC and netflow