[CCNA]试验40 配置帧中继Hub and Spoke点到点子接口

R1配置

r1(config)#int s3/0
r1(config-if)#en fr
r1(config-if)#no sh
r1(config-if)#no fr

r1(config)#int s3/0.1 point-to-point r1(config-subif)#fr
r1(config-subif)#frame-relay interface-dlci 102
r1(config-fr-dlci)#exit
r1(config-subif)#int s3/0.2 point-to-point
r1(config-subif)#fr
r1(config-subif)#frame-relay interface-dlci 103
r1(config-fr-dlci)#exit
r1(config-subif)#^Z

r1#sh frame map
Serial3/0.1 (up): point-to-point dlci, dlci 102(0×66,0×1860), broadcast
status defined, active
Serial3/0.2 (up): point-to-point dlci, dlci 103(0×67,0×1870), broadcast
status defined, active

R2配置

r2(config)#int s3/0
r2(config-if)#en fr
r2(config-if)#no sh
r2(config-if)#no frame inverse-arp
r2(config-if)#frame map ip 172.16.0.1 201 b
r2(config-if)#ip add 172.16.0.2 255.255.255.0
r2(config-if)#^Z

R3配置

r3(config)#int s3/0
r3(config-if)#en fr

r3(config-if)#no sh
r3(config-if)#no fr
r3(config-if)#no frame-relay inverse-arp
r3(config-if)#frame map ip 192.168.0.1 301 b
r3(config-if)#ip add 192.168.0.3 255.255.255.0
r3(config-if)#^Z