内网通过公网地址访问内部服务器
一、组网拓扑：
二、组网需求：
要求内部用户访问内部服务器时，可通过外网映射的地址访问服务器（
WWW
，
FTP
等）。
三、配置实例如下：
<Quidway>dis cur
#
sysname Quidway
#
firewall packet-filter enable
firewall packet-filter default permit
#
undo insulate
#
undo connection-limit enable
connection-limit default deny
connection-limit default amount upper-limit 50 lower-limit 20
#
firewall statistic system enable
#
radius scheme system
#
domain system
#
acl number 2000
rule 0 permit source 172.16.0.0 0.0.255.255
#
interface Aux0
async mode flow
#
interface Ethernet0/0
ip address 172.16.2.1 255.255.255.0
nat server protocol tcp global 10.153.49.212 www inside 172.16.1.2 www
#
interface Ethernet1/0
ip address 10.153.49.193 255.255.252.0
nat outbound 2000
nat server protocol tcp global 10.153.49.212 www inside 172.16.1.2 www
#
interface Ethernet1/1
#
interface Ethernet1/2
ip address 172.16.1.1 255.255.255.0
#
interface NULL0
#
firewall zone local
set priority 100
#
firewall zone trust
add interface Ethernet0/0
set priority 85
#
firewall zone untrust
add interface Ethernet1/0
set priority 5
#
firewall zone DMZ
add interface Ethernet1/2
set priority 50
#
firewall interzone local trust
#
firewall interzone local untrust
#
firewall interzone local DMZ
#
firewall interzone trust untrust
#
firewall interzone trust DMZ
#
firewall interzone DMZ untrust
#
ip route-static 0.0.0 .0 0.0.0.0 10.153.48.1 preference 60
#
user-interface con 0
user-interface aux 0
user-interface vty 0 4
authentication-mode none
#
return
<Quidway>
四、说明：
1
．映射地址可以是出口的接口地址。
2
．服务器可以在“
TRUST
”区域中。
3
．目前在
SecPath
防火墙上，暂时还没有办法使内网用户通过域名、外网
IP
、私网地址同时能访问内网服务器。