域名
|
描述
|
Ethernet0/1 current state
|
以太网端口当前开启或关闭状态
|
IP Sending Frames' Format
|
以太网帧格式
|
Hardware address
|
端口硬件地址
|
The Maximum Transmit Unit
|
最大传输单元
|
Media type
|
介质类型
|
loopback not set
|
端口环回测试状态
|
Port hardware type
|
端口硬件类型
|
100Mbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link
duplex type is autonegotiation
|
端口的双工状态和速率均设置为自协商状态,
与对端协商的实际结果是
100Mbit/s
速率和全
双工模式
|
Flow-control is not enabled
|
端口流控状态
|
The Maximum Frame Length
|
端口允许通过的最大以太网帧长度
|
Broadcast MAX-ratio
|
端口广播风暴抑制比
|
PVID
|
端口缺省
VLAN ID
|
Mdi type
|
网线类型
|
Port link-type
|
端口链路类型
|
Tagged VLAN ID
|
标识在该端口有哪些
VLAN
的报文需要打
Tag
标记
|
Untagged VLAN ID
|
标识在该端口有哪些
VLAN
的报文不需要打
Tag
标记
|
Last 300 seconds input: 0 packets/sec 0
bytes/sec
Last 300 seconds output: 0 packets/sec
0 bytes/sec
|
端口最近
300
秒输入和输出速率和报文数
|
Input(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts
Input(normal): - packets, - bytes
- broadcasts, - multicasts
Input: 0 input errors, - runts, 0 giants, -
throttles, 0 CRC
0 frame, - overruns, 0 aborts, 0
ignored, - parity errors
Output(total): 0 packets, 0 bytes
0 broadcasts, 0 multicasts, 0
pauses
Output(normal): - packets, - bytes
- broadcasts, - multicasts, - pauses
Output: 0 output errors, - underruns, -
buffer failures
- aborts, 0 deferred, 0 collisions, 0
late collisions
- lost carrier, - no carrier
|
端口输入
/
输出报文和错误信息统计,其中“
-
”
表示不支持该统计项。
|
本文出自 “李胡” 博客,谢绝转载!