关于H3C路由配置VLAN的问题

单位里有一台H3C ICG2000C的中国电信商务领航路由器。路由下面接了华为S2403H-EI的交换机。我把交换机的3口.4口做了VLAN，24口上联路由器。交换机的配置文档如下。

   <Quidway>sys                                                                    
                          
[Quidway]vlan 1                                                            
[Quidway-vlan1]quit                                                           
                                                                  
[Quidway] interface vlan-interface  1                                              
                                                                                                      
[Quidway-Vlan-interface1]ip add 192.168.1.25 255.255.255.0       (交换机地址)          
[Quidway-Vlan-interface1]quit                                                 
                                                
[Quidway]int  Ethernet 0/24                                                
                                       
[Quidway- Ethernet0/24]port link-type trunk                               
                                     
[Quidway- Ethernet0/24]port trunk permit vlan 1                         
 Please wait... Done!                                                          
[Quidway- Ethernet0/2]quit   
                                           
[Quidway]  ip route-static  0.0.0.0 0.0.0.0 192.168.1.1   
[Quidway]vlan 10
[Quidway]q
[Quidway]int e 0/3                 (内网口配置)
[Quidway- Ethernet0/3]port access vlan 10
[Quidway- Ethernet0/3]q
[Quidway]vlan 20
[Quidway]q
[Quidway]int e 0/4         (内网口配置)
[Quidway- Ethernet0/4]port access vlan 20
[Quidway- Ethernet0/4]q        

 

                                              
[Quidway]local-user huawei                                                       
                                               
[Quidway-luser-huawei]password simple huawei                                    
                      
[Quidway-luser-huawei]service-type telnet level 3                               
[Quidway-luser-huawei]quit                                                      
                                                               
[Quidway]user-interface vty 0 4                                                 
                                                      
[Quidway-ui-vty0-4]authentication-mode  scheme                                    
 
[Quidway-ui-vty0-4]quit                                                         
                                                                  
[Quidway]quit                              

 

我把交换机做了一个192.168.1.25的地址，外网地址是61.191.X.X.希望可以和路由的地址映射。方便我在家直接telnet交换机。

存在问题就是：（1）H3C的路由怎么配置VLAN，保证3口，4口下的电脑能上外  网。                        

                                （2）H3C的路由做映射不在WEB界面做，用console口可以实现吗。          
       麻烦各位高手指点下，谢谢了哈。