[置顶] Android自定义控件之仿美团下拉刷新

美团的下拉刷新分为三个状态：
第一个状态为下拉刷新状态(pull to refresh)，在这个状态下是一个绿色的椭圆随着下拉的距离动态改变其大小。
第二个部分为放开刷新状态(release to refresh)，在这个状态下是一个帧动画，效果为从躺着变为站起来的动画。
第三个部分为刷新状态(refreshing)，在这个状态下也是一个帧动画，是摇头的动画。

其中第二和第三个状态很简单，就是两个帧动画，第一个状态我们可以用自定义View来实现。

第一个状态的实现：

我们的思路是：当前这个椭圆形有一个进度值，这个进度值从0变为1，然后对这个椭圆形进行缩放，我们可以使用自定义View来实现这个效果，我们先来用一个SeekBar来模仿一下下拉距离的进度

我们解压美团apk后拿到这张图片：

public class MeiTuanRefreshFirstStepView extends View{

    private Bitmap initialBitmap;
    private int measuredWidth;
    private int measuredHeight;
    private Bitmap endBitmap;
    private float mCurrentProgress;
    private Bitmap scaledBitmap;

    public MeiTuanRefreshFirstStepView(Context context, AttributeSet attrs,
            int defStyle) {
        super(context, attrs, defStyle);
        init(context);
    }

    public MeiTuanRefreshFirstStepView(Context context, AttributeSet attrs) {
        super(context, attrs);
        init(context);
    }

    public MeiTuanRefreshFirstStepView(Context context) {
        super(context);
        init(context);
    }

    private void init(Context context) {
        //这个就是那个椭圆形图片
        initialBitmap = Bitmap.createBitmap(BitmapFactory.decodeResource(getResources(), R.drawable.pull_image));
        //这个是第二个状态娃娃的图片，之所以要这张图片，是因为第二个状态和第三个状态的图片的大小是一致的，而第一阶段
        //椭圆形图片的大小与第二阶段和第三阶段不一致，因此我们需要根据这张图片来决定第一张图片的宽高，来保证
        //第一阶段和第二、三阶段的View的宽高一致
        endBitmap = Bitmap.createBitmap(BitmapFactory.decodeResource(getResources(), R.drawable.pull_end_image_frame_05));
    }

    /** * 重写onMeasure方法主要是设置wrap_content时 View的大小 * @param widthMeasureSpec * @param heightMeasureSpec */
    @Override
    protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
        //根据设置的宽度来计算高度 设置为符合第二阶段娃娃图片的宽高比例
        setMeasuredDimension(measureWidth(widthMeasureSpec),measureWidth(widthMeasureSpec)*endBitmap.getHeight()/endBitmap.getWidth());
    }

    /** * 当wrap_content的时候，宽度即为第二阶段娃娃图片的宽度 * @param widMeasureSpec * @return */
    private int measureWidth(int widMeasureSpec){
        int result = 0;
        int size = MeasureSpec.getSize(widMeasureSpec);
        int mode = MeasureSpec.getMode(widMeasureSpec);
        if (mode == MeasureSpec.EXACTLY){
            result = size;
        }else{
            result = endBitmap.getWidth();
            if (mode == MeasureSpec.AT_MOST){
                result = Math.min(result,size);
            }
        }
        return result;
        }

    /** * 在onLayout里面获得测量后View的宽高 * @param changed * @param left * @param top * @param right * @param bottom */
    @Override
    protected void onLayout(boolean changed, int left, int top, int right,
            int bottom) {
        super.onLayout(changed, left, top, right, bottom);
        measuredWidth = getMeasuredWidth();
        measuredHeight = getMeasuredHeight();
        //根据第二阶段娃娃宽高 给椭圆形图片进行等比例的缩放
        scaledBitmap = Bitmap.createScaledBitmap(initialBitmap, measuredWidth,measuredWidth*initialBitmap.getHeight()/initialBitmap.getWidth(), true);
    }


    @Override
    protected void onDraw(Canvas canvas) {
        super.onDraw(canvas);
        //这个方法是对画布进行缩放，从而达到椭圆形图片的缩放，第一个参数为宽度缩放比例，第二个参数为高度缩放比例，
        canvas.scale(mCurrentProgress, mCurrentProgress, measuredWidth/2, measuredHeight/2);
        //将等比例缩放后的椭圆形画在画布上面
        canvas.drawBitmap(scaledBitmap,0,measuredHeight/4,null);

    }

    /** * 设置缩放比例，从0到1 0为最小 1为最大 * @param currentProgress */
    public void setCurrentProgress(float currentProgress){
        mCurrentProgress = currentProgress;
    }

然后在Activity里面：

/** * Created by zhangqi on 15/11/1. */
public class MyActivity extends Activity {
    private MeiTuanRefreshFirstStepView mFirstView;
    private SeekBar mSeekBar;
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_my);
        mSeekBar = (SeekBar) findViewById(R.id.seekbar);
        mFirstView = (MeiTuanRefreshFirstStepView) findViewById(R.id.first_view);
        mSeekBar.setOnSeekBarChangeListener(new SeekBar.OnSeekBarChangeListener() {
            @Override
            public void onProgressChanged(SeekBar seekBar, int i, boolean b) {
                //计算出当前seekBar滑动的比例结果为0到1
                float currentProgress = (float) i / (float) seekBar.getMax();
                //给我们的view设置当前进度值
                mFirstView.setCurrentProgress(currentProgress);
                //重画
                mFirstView.postInvalidate();
            }

            @Override
            public void onStartTrackingTouch(SeekBar seekBar) {

            }

            @Override
            public void onStopTrackingTouch(SeekBar seekBar) {

            }
        });
    }
}

第二个状态的实现：

第二个状态是一个帧动画，我们为了保证View大小的统一，我们也进行自定义View，这个自定义View很简单，只是为了和第一阶段View的宽高保证一致即可

public class MeiTuanRefreshSecondStepView extends View{

    private Bitmap endBitmap;

    public MeiTuanRefreshSecondStepView(Context context, AttributeSet attrs,
            int defStyle) {
        super(context, attrs, defStyle);
        init();
    }

    public MeiTuanRefreshSecondStepView(Context context, AttributeSet attrs) {
        super(context, attrs);
        init();
    }

    public MeiTuanRefreshSecondStepView(Context context) {
        super(context);
        init();
    }

    private void init() {
        endBitmap = Bitmap.createBitmap(BitmapFactory.decodeResource(getResources(), R.drawable.pull_end_image_frame_05));
    }

    @Override
    protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
        setMeasuredDimension(measureWidth(widthMeasureSpec), measureWidth(widthMeasureSpec)*endBitmap.getHeight()/endBitmap.getWidth());
    }

    private int measureWidth(int widthMeasureSpec){
        int result = 0;
        int size = MeasureSpec.getSize(widthMeasureSpec);
        int mode = MeasureSpec.getMode(widthMeasureSpec);
        if (mode == MeasureSpec.EXACTLY) {
            result = size;
        }else {
            result = endBitmap.getWidth();
            if (mode == MeasureSpec.AT_MOST) {
                result = Math.min(result, size);
            }
        }
        return result;
    }
}

我们用xml定义一组帧动画

<?xml version="1.0" encoding="utf-8"?>
<animation-list xmlns:android="http://schemas.android.com/apk/res/android" android:oneshot="true" >
    <item android:drawable="@drawable/pull_end_image_frame_01" android:duration="100"/>
    <item android:drawable="@drawable/pull_end_image_frame_02" android:duration="100"/>
    <item android:drawable="@drawable/pull_end_image_frame_03" android:duration="100"/>
    <item android:drawable="@drawable/pull_end_image_frame_04" android:duration="100"/>
    <item android:drawable="@drawable/pull_end_image_frame_05" android:duration="100"/>


</animation-list>

帧动画的启动和停止方式：

mSecondView = (MeiTuanRefreshSecondStepView) headerView.findViewById(R.id.second_view);
        mSecondView.setBackgroundResource(R.drawable.pull_to_refresh_second_anim);
        secondAnim = (AnimationDrawable) mSecondView.getBackground();
//启动
secondAnim.start();
//停止
secondAnim.stop();

第三个状态的实现：

和第二个状态同理，我们也通过自定义View来确保三个状态的View的宽高保持一致

public class MeiTuanRefreshThirdStepView extends View{

    private Bitmap endBitmap;

    public MeiTuanRefreshThirdStepView(Context context, AttributeSet attrs,
            int defStyle) {
        super(context, attrs, defStyle);
        init();
    }

    public MeiTuanRefreshThirdStepView(Context context, AttributeSet attrs) {
        super(context, attrs);
        init();
    }

    public MeiTuanRefreshThirdStepView(Context context) {
        super(context);
        init();
    }

    private void init() {
        endBitmap = Bitmap.createBitmap(BitmapFactory.decodeResource(getResources(), R.drawable.pull_end_image_frame_05));
    }

    @Override
    protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
        setMeasuredDimension(measureWidth(widthMeasureSpec), measureWidth(widthMeasureSpec)*endBitmap.getHeight()/endBitmap.getWidth());
    }

    private int measureWidth(int widthMeasureSpec){
        int result = 0;
        int size = MeasureSpec.getSize(widthMeasureSpec);
        int mode = MeasureSpec.getMode(widthMeasureSpec);
        if (mode == MeasureSpec.EXACTLY) {
            result = size;
        }else {
            result = endBitmap.getWidth();
            if (mode == MeasureSpec.AT_MOST) {
                result = Math.min(result, size);
            }
        }
        return result;
    }

我们在xml中定义一组帧动画：

<?xml version="1.0" encoding="utf-8"?>
<animation-list xmlns:android="http://schemas.android.com/apk/res/android"
    android:oneshot="false" >
    <item android:drawable="@drawable/refreshing_image_frame_01" android:duration="100"/>
    <item android:drawable="@drawable/refreshing_image_frame_02" android:duration="100"/>
    <item android:drawable="@drawable/refreshing_image_frame_03" android:duration="100"/>
    <item android:drawable="@drawable/refreshing_image_frame_04" android:duration="100"/>
    <item android:drawable="@drawable/refreshing_image_frame_05" android:duration="100"/>
    <item android:drawable="@drawable/refreshing_image_frame_06" android:duration="100"/>
    <item android:drawable="@drawable/refreshing_image_frame_07" android:duration="100"/>
    <item android:drawable="@drawable/refreshing_image_frame_08" android:duration="100"/>


</animation-list>

帧动画的启动和停止方式和第二个状态的一样

下拉刷新的实现：

首先我们要定义好几个状态，下拉刷新有这样几个状态：
DONE:隐藏的状态
PULL_TO_REFRESH:下拉刷新的状态
RELEASE_TO_REFRESH:松开刷新的状态
REFRESHING:正在刷新的状态

/** * Created by zhangqi on 15/10/18. */
public class MeiTuanListView extends ListView implements AbsListView.OnScrollListener{
    private static final int DONE = 0;
    private static final int PULL_TO_REFRESH = 1;
    private static final int RELEASE_TO_REFRESH = 2;
    private static final int REFRESHING = 3;
    private static final int RATIO = 3;
    private LinearLayout headerView;
    private int headerViewHeight;
    private float startY;
    private float offsetY;
    private TextView tv_pull_to_refresh;
    private OnMeiTuanRefreshListener mOnRefreshListener;
    private int state;
    private int mFirstVisibleItem;
    private boolean isRecord;
    private boolean isEnd;
    private boolean isRefreable;
    private FrameLayout mAnimContainer;
    private Animation animation;
    private SimpleDateFormat format;
    private MeiTuanRefreshFirstStepView mFirstView;
    private MeiTuanRefreshSecondStepView mSecondView;
    private AnimationDrawable secondAnim;
    private MeiTuanRefreshThirdStepView mThirdView;
    private AnimationDrawable thirdAnim;

    public MeiTuanListView(Context context) {
        super(context);
        init(context);
    }

    public MeiTuanListView(Context context, AttributeSet attrs) {
        super(context, attrs);
        init(context);
    }

    public MeiTuanListView(Context context, AttributeSet attrs, int defStyleAttr) {
        super(context, attrs, defStyleAttr);
        init(context);
    }

    public interface OnMeiTuanRefreshListener{
        void onRefresh();
    }

    /** * 回调接口，想实现下拉刷新的listview实现此接口 * @param onRefreshListener */
    public void setOnMeiTuanRefreshListener(OnMeiTuanRefreshListener onRefreshListener){
        mOnRefreshListener = onRefreshListener;
        isRefreable = true;
    }

    /** * 刷新完毕，从主线程发送过来，并且改变headerView的状态和文字动画信息 */
    public void setOnRefreshComplete(){
        //一定要将isEnd设置为true，以便于下次的下拉刷新
        isEnd = true;
        state = DONE;

        changeHeaderByState(state);
    }

    private void init(Context context) {
        setOverScrollMode(View.OVER_SCROLL_NEVER);
        setOnScrollListener(this);

        headerView = (LinearLayout) LayoutInflater.from(context).inflate(R.layout.meituan_item, null, false);
        mFirstView = (MeiTuanRefreshFirstStepView) headerView.findViewById(R.id.first_view);
        tv_pull_to_refresh = (TextView) headerView.findViewById(R.id.tv_pull_to_refresh);
        mSecondView = (MeiTuanRefreshSecondStepView) headerView.findViewById(R.id.second_view);
        mSecondView.setBackgroundResource(R.drawable.pull_to_refresh_second_anim);
        secondAnim = (AnimationDrawable) mSecondView.getBackground();
        mThirdView = (MeiTuanRefreshThirdStepView) headerView.findViewById(R.id.third_view);
        mThirdView.setBackgroundResource(R.drawable.pull_to_refresh_third_anim);
        thirdAnim = (AnimationDrawable) mThirdView.getBackground();

        measureView(headerView);
        addHeaderView(headerView);
        headerViewHeight = headerView.getMeasuredHeight();
        headerView.setPadding(0, -headerViewHeight, 0, 0);
        Log.i("zhangqi","headerViewHeight="+headerViewHeight);

        state = DONE;
        isEnd = true;
        isRefreable = false;
    }




    @Override
    public void onScrollStateChanged(AbsListView absListView, int i) {
    }
    @Override
    public void onScroll(AbsListView absListView, int firstVisibleItem, int visibleItemCount, int totalItemCount) {
        mFirstVisibleItem = firstVisibleItem;
    }

    @Override
    public boolean onTouchEvent(MotionEvent ev) {
        if (isEnd) {//如果现在时结束的状态，即刷新完毕了，可以再次刷新了，在onRefreshComplete中设置
            if (isRefreable) {//如果现在是可刷新状态 在setOnMeiTuanListener中设置为true
                switch (ev.getAction()){
                    //用户按下
                case MotionEvent.ACTION_DOWN:
                    //如果当前是在listview顶部并且没有记录y坐标
                    if (mFirstVisibleItem == 0 && !isRecord) {
                        //将isRecord置为true，说明现在已记录y坐标
                        isRecord = true;
                        //将当前y坐标赋值给startY起始y坐标
                        startY = ev.getY();
                    }
                    break;
                //用户滑动
                case MotionEvent.ACTION_MOVE:
                    //再次得到y坐标，用来和startY相减来计算offsetY位移值
                    float tempY = ev.getY();
                    //再起判断一下是否为listview顶部并且没有记录y坐标
                    if (mFirstVisibleItem == 0 && !isRecord) {
                        isRecord = true;
                        startY = tempY;
                    }
                    //如果当前状态不是正在刷新的状态，并且已经记录了y坐标
                    if (state!=REFRESHING && isRecord ) {
                        //计算y的偏移量
                        offsetY = tempY - startY;
                        //计算当前滑动的高度
                        float currentHeight = (-headerViewHeight+offsetY/3);
                        //用当前滑动的高度和头部headerView的总高度进行比 计算出当前滑动的百分比 0到1
                        float currentProgress = 1+currentHeight/headerViewHeight;
                        //如果当前百分比大于1了，将其设置为1，目的是让第一个状态的椭圆不再继续变大
                        if (currentProgress>=1) {
                            currentProgress = 1;
                        }
                        //如果当前的状态是放开刷新，并且已经记录y坐标
                        if (state == RELEASE_TO_REFRESH && isRecord) {
                            setSelection(0);
                            //如果当前滑动的距离小于headerView的总高度
                            if (-headerViewHeight+offsetY/RATIO<0) {
                                //将状态置为下拉刷新状态
                                state = PULL_TO_REFRESH;
                                //根据状态改变headerView，主要是更新动画和文字等信息
                                changeHeaderByState(state);
                                //如果当前y的位移值小于0，即为headerView隐藏了
                            }else if (offsetY<=0) {
                                //将状态变为done
                                state = DONE;
                                //根据状态改变headerView，主要是更新动画和文字等信息
                                changeHeaderByState(state);
                            }
                        }
                        //如果当前状态为下拉刷新并且已经记录y坐标
                        if (state == PULL_TO_REFRESH && isRecord) {
                            setSelection(0);
                            //如果下拉距离大于等于headerView的总高度
                            if (-headerViewHeight+offsetY/RATIO>=0) {
                                //将状态变为放开刷新
                                state = RELEASE_TO_REFRESH;
                                //根据状态改变headerView，主要是更新动画和文字等信息
                                changeHeaderByState(state);
                                //如果当前y的位移值小于0，即为headerView隐藏了
                            }else if (offsetY<=0) {
                                //将状态变为done
                                state = DONE;
                                //根据状态改变headerView，主要是更新动画和文字等信息
                                changeHeaderByState(state);
                            }
                        }
                        //如果当前状态为done并且已经记录y坐标
                        if (state == DONE && isRecord) {
                            //如果位移值大于0
                            if (offsetY>=0) {
                                //将状态改为下拉刷新状态
                                state = PULL_TO_REFRESH;
                            }
                        }
                        //如果为下拉刷新状态
                        if (state == PULL_TO_REFRESH) {
                            //则改变headerView的padding来实现下拉的效果
                            headerView.setPadding(0,(int)(-headerViewHeight+offsetY/RATIO) ,0,0);
                            //给第一个状态的View设置当前进度值
                            mFirstView.setCurrentProgress(currentProgress);
                            //重画
                            mFirstView.postInvalidate();
                        }
                        //如果为放开刷新状态
                        if (state == RELEASE_TO_REFRESH) {
                            //改变headerView的padding值
                            headerView.setPadding(0,(int)(-headerViewHeight+offsetY/RATIO) ,0, 0);
                            //给第一个状态的View设置当前进度值
                            mFirstView.setCurrentProgress(currentProgress);
                            //重画
                            mFirstView.postInvalidate();
                        }
                    }
                    break;
                //当用户手指抬起时
                case MotionEvent.ACTION_UP:
                    //如果当前状态为下拉刷新状态
                    if (state == PULL_TO_REFRESH) {
                        //平滑的隐藏headerView
                        this.smoothScrollBy((int)(-headerViewHeight+offsetY/RATIO)+headerViewHeight, 500);
                        //根据状态改变headerView
                        changeHeaderByState(state);
                    }
                    //如果当前状态为放开刷新
                    if (state == RELEASE_TO_REFRESH) {
                        //平滑的滑到正好显示headerView
                        this.smoothScrollBy((int)(-headerViewHeight+offsetY/RATIO), 500);
                        //将当前状态设置为正在刷新
                        state = REFRESHING;
                        //回调接口的onRefresh方法
                        mOnRefreshListener.onRefresh();
                        //根据状态改变headerView
                        changeHeaderByState(state);
                    }
                    //这一套手势执行完，一定别忘了将记录y坐标的isRecord改为false，以便于下一次手势的执行
                    isRecord = false;
                    break;
                }

            }
        }
        return super.onTouchEvent(ev);
    }

    /** * 根据状态改变headerView的动画和文字显示 * @param state */
    private void changeHeaderByState(int state){
        switch (state) {
        case DONE://如果的隐藏的状态
            //设置headerView的padding为隐藏
            headerView.setPadding(0, -headerViewHeight, 0, 0);
            //第一状态的view显示出来
            mFirstView.setVisibility(View.VISIBLE);
            //第二状态的view隐藏起来
            mSecondView.setVisibility(View.GONE);
            //停止第二状态的动画
            secondAnim.stop();
            //第三状态的view隐藏起来
            mThirdView.setVisibility(View.GONE);
            //停止第三状态的动画
            thirdAnim.stop();
            break;
        case RELEASE_TO_REFRESH://当前状态为放开刷新
            //文字显示为放开刷新
            tv_pull_to_refresh.setText("放开刷新");
            //第一状态view隐藏起来
            mFirstView.setVisibility(View.GONE);
            //第二状态view显示出来
            mSecondView.setVisibility(View.VISIBLE);
            //播放第二状态的动画
            secondAnim.start();
            //第三状态view隐藏起来
            mThirdView.setVisibility(View.GONE);
            //停止第三状态的动画
            thirdAnim.stop();
            break;
        case PULL_TO_REFRESH://当前状态为下拉刷新
            //设置文字为下拉刷新
            tv_pull_to_refresh.setText("下拉刷新");
            //第一状态view显示出来
            mFirstView.setVisibility(View.VISIBLE);
            //第二状态view隐藏起来
            mSecondView.setVisibility(View.GONE);
            //第二状态动画停止
            secondAnim.stop();
            //第三状态view隐藏起来
            mThirdView.setVisibility(View.GONE);
            //第三状态动画停止
            thirdAnim.stop();
            break;
        case REFRESHING://当前状态为正在刷新
            //文字设置为正在刷新
            tv_pull_to_refresh.setText("正在刷新");
            //第一状态view隐藏起来
            mFirstView.setVisibility(View.GONE);
            //第三状态view显示出来
            mThirdView.setVisibility(View.VISIBLE);
            //第二状态view隐藏起来
            mSecondView.setVisibility(View.GONE);
            //停止第二状态动画
            secondAnim.stop();
            //启动第三状态view
            thirdAnim.start();
            break;
        default:
            break;
        }
    }


    private void measureView(View child) {
        ViewGroup.LayoutParams p = child.getLayoutParams();
        if (p == null) {
            p = new ViewGroup.LayoutParams(ViewGroup.LayoutParams.MATCH_PARENT,
                    ViewGroup.LayoutParams.WRAP_CONTENT);
        }
        int childWidthSpec = ViewGroup.getChildMeasureSpec(0, 0 + 0, p.width);
        int lpHeight = p.height;
        int childHeightSpec;
        if (lpHeight > 0) {
            childHeightSpec = MeasureSpec.makeMeasureSpec(lpHeight,
                    MeasureSpec.EXACTLY);
        } else {
            childHeightSpec = MeasureSpec.makeMeasureSpec(0,
                    MeasureSpec.UNSPECIFIED);
        }
        child.measure(childWidthSpec, childHeightSpec);
    }


}

一切准备就绪，在Activity中使用：

public class MainActivity extends Activity implements OnMeiTuanRefreshListener{
    private MeiTuanListView mListView;
    private List<String> mDatas;
    private ArrayAdapter<String> mAdapter;
    private final static int REFRESH_COMPLETE = 0;
    /** * mHandler运行在主线程，因为setOnRefreshComplete需要改变ui，必须在主线程去改变ui * 所以在handleMessage中调用mListView.setOnRefreshComplete(); */
    private Handler mHandler = new Handler(){
        public void handleMessage(android.os.Message msg) {
            switch (msg.what) {
            case REFRESH_COMPLETE:
                mListView.setOnRefreshComplete();
                mAdapter.notifyDataSetChanged();
                mListView.setSelection(0);
                break;

            default:
                break;
            }
        };
    };

    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        setContentView(R.layout.activity_main);
        mListView = (MeiTuanListView) findViewById(R.id.listview);
        String[] data = new String[]{"hello world","hello world","hello world","hello world",
                "hello world","hello world","hello world","hello world","hello world",
                "hello world","hello world","hello world","hello world","hello world",};
        mDatas = new ArrayList<String>(Arrays.asList(data));
        mAdapter = new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1,mDatas);
        mListView.setAdapter(mAdapter);
        mListView.setOnMeiTuanRefreshListener(this);
    }

    @Override
    public void onRefresh() {
        new Thread(new Runnable() {

            @Override
            public void run() {
                try {
                    Thread.sleep(3000);
                    mDatas.add(0, "new data");
                    mHandler.sendEmptyMessage(REFRESH_COMPLETE);
                } catch (InterruptedException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
                }
            }
        }).start();
    }


}

完整代码

完整代码大家可以上我的GitHub下载，如果大家觉得还可以就star一下~哈哈