UBOOT 6410分析篇
U-Boot是用于多种嵌入式CPU（ MIPS、x86、ARM等）的bootloader程序,U-Boot不仅支持嵌入式Linux系统的引导，还支持VxWorks, QNX等多种嵌入式操作系统。
查看S3C6410_Internal_ROM_Booting.pdf可看到系统启动的原理图如下：
linux的Uboot分析
对于.lds文件，它定义了整个程序编译之后的连接过程，决定了一个可执行程序的各个段的存储位置。
SECTIONS {
...
secname start BLOCK(align) (NOLOAD) : AT ( ldadr )
{ contents } >region :phdr =fill
...
}
secname和contents是必须的，其他的都是可选的。下面挑几个常用的看看：
1、secname：段名
2、contents：决定哪些内容放在本段，可以是整个目标文件，也可以是目标文件中的某段（代码段、数据段等）
3、start：本段连接（运行）的地址，如果没有使用AT（ldadr），本段存储的地址也是start。GNU网站上说start可以用任意一种描述地址的符号来描述。
4、AT（ldadr）：定义本段存储（加载）的地址。
结合u-boot.lds进行分析：
OUTPUT_FORMAT("elf32littlearm", "elf32littlearm", "elf32littlearm")
//指定输出可执行文件是elf格式,32位ARM指令,小端
OUTPUT_ARCH(arm)
//指定输出可执行文件的平台为ARM
ENTRY(_start)
//指定输出可执行文件的起始代码段为_start.
SECTIONS
{
. = 0x00000000 ; 从0x0位置开始
. = ALIGN(4) ; 代码以4字节对齐
.text : ;指定代码段
{
cpu/s3c64xx/start.o (.text) //代码的第一个代码部分
cpu/s3c64xx/s3c6410/cpu_init.o// (.text)//初始化CPU
cpu/s3c64xx/onenand_cp.o // (.text)
cpu/s3c64xx/nand_cp.o //(.text)//拷贝nandflash 8K至stepstone
cpu/s3c64xx/movi.o //(.text)//把nandflash剩余部分拷贝至DRAM中运行
*(.text)//代码剩余部分
lib_arm/div0.o
}
. = ALIGN(4)
.rodata : { *(.rodata) }//指定只读数据段
. = ALIGN(4)
.data : { *(.data) } //指定读/写数据段
. = ALIGN(4)
.got : { *(.got) } //指定got段, got段式是uboot自定义的一个段, 非标准段
__u_boot_cmd_start = . //把__u_boot_cmd_start赋值为当前位置, 即起始位置
.u_boot_cmd : { *(.u_boot_cmd) } //指定u_boot_cmd段, uboot把所有的uboot命令放在该段.
__u_boot_cmd_end = .//把__u_boot_cmd_end赋值为当前位置,即结束位置
. = ALIGN(4)
__bss_start = .// 把__bss_start赋值为当前位置,即bss段的开始位置
.bss : { *(.bss) }// 指定bss段
_end = .//把_end赋值为当前位置,即bss段的结束位置
}
在链接器脚本中可以看出，程序入口时start.s，下面开始分析start.s
* armboot - Startup Code for S3C6400/ARM1176 CPU-core * * Copyright (c) 2007 Samsung Electronics * * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * 2007-09-21 - Restructured codes by jsgood ([email protected]) * 2007-09-21 - Added moviNAND and OneNAND boot codes by jsgood ([email protected]) * Base codes by scsuh (sc.suh) */ #include #include #ifdef CONFIG_ENABLE_MMU #include #endif #include #ifndef CONFIG_ENABLE_MMU #ifndef CFG_PHY_UBOOT_BASE #define CFG_PHY_UBOOT_BASE CFG_UBOOT_BASE #endif #endif /* ************************************************************************* * * Jump vector table as in table 3.1 in [1] * ************************************************************************* */ //global声明一个符号可被其它文件引用，相当于声明了一个全局变量，.globl与.global相同。 //该部分为处理器的异常处理向量表。地址范围为0x0000 0000 ~ 0x0000 0020,刚好8条指令。 (1) .globl _start _start: b reset ldr pc, _undefined_instruction ldr pc, _software_interrupt ldr pc, _prefetch_abort ldr pc, _data_abort ldr pc, _not_used ldr pc, _irq ldr pc, _fiq // .word伪操作用于分配一段字内存单元（分配的单元都是字对齐的），并用伪操作中的expr初始化。.long与.int作用与之//相同。 _undefined_instruction: .word undefined_instruction _software_interrupt: .word software_interrupt _prefetch_abort: .word prefetch_abort _data_abort: .word data_abort _not_used: .word not_used _irq: .word irq _fiq: .word fiq _pad: .word 0x12345678 /* now 16*4=64 */ .global _end_vect _end_vect: .balignl 16,0xdeadbeef /* ************************************************************************* * * Startup Code (reset vector) * * do important init only if we don't start from memory! * setup Memory and board specific bits prior to relocation. * relocate armboot to ram * setup stack * ************************************************************************* */ // TEXT_BASE在开发板相关的目录中的config.mk文件中定义, 它定义了 // 代码在运行时所在的地址, 那么_TEXT_BASE中保存了这个地址 _TEXT_BASE: .word TEXT_BASE /* * Below variable is very important because we use MMU in U-Boot. * Without it, we cannot run code correctly before MMU is ON. * by scsuh. */ _TEXT_PHY_BASE: .word CFG_PHY_UBOOT_BASE // 声明 _armboot_start 并用 _start 来进行初始化，在board/u-boot.lds中定义 .globl _armboot_start _armboot_start: .word _start /* * These are defined in the board-specific linker script. */ // 声明_bss_start并用__bss_start来初始化，其中__bss_start定义在与板相关的u-boot.lds中。 // _bss_start保存的是__bss_start这个标号所在的地址, 这里涉及到当前代码所在 // 的地址不是编译时的地址的情况, 这里直接取得该标号对应的地址, 不受编译时 // 地址的影响. _bss_end也是同样的道理. .globl _bss_start _bss_start: .word __bss_start .globl _bss_end _bss_end: .word _end #ifdef CONFIG_USE_IRQ /* IRQ stack memory (calculated at run-time) */ .globl IRQ_STACK_START IRQ_STACK_START: .word 0x0badc0de /* IRQ stack memory (calculated at run-time) */ .globl FIQ_STACK_START FIQ_STACK_START: .word 0x0badc0de #endif
/*
* the actual reset code
*/
// MRS {
} Rd,CPSR|SPSR 将CPSR｜SPSR传送到Rd
// 使用这两条指令将状态寄存器传送到一般寄存器，只修改必要的位，再将结果传送回状态寄存器，这样可以最好地完成对CRSP或者SPSR的修改
// MSR {
} CPSR_
|SPSR_
,Rm 或者是 MSR {
} CPSR_f|SPSR_f,#<32-bit immediate=""> // MRS与MSR配合使用，作为更新PSR的“读取－－修改－－写回”序列的一部分 // bic r0,r1,r2 ;r0:=r1 and not r2 // orr ro,r1,r2 ;r0:=r1 or r2 // 这几条指令执行完毕后，进入SVC模式，该模式主要用来处理软件中断(SWI) reset: /* * set the cpu to SVC32 mode */ mrs r0,cpsr bic r0,r0,#0x1f orr r0,r0,#0xd3 msr cpsr,r0
CPU及DDR内存初始化代码
/*
*************************************************************************
*
* CPU_init_critical registers
*
* setup important registers
* setup memory timing
*
*************************************************************************
*/
/*
* we do sys-critical inits only at reboot,
* not when booting from ram!
*/
//cpu初始化
cpu_init_crit:
/*
* flush v4 I/D caches
*/
//关闭I/Dcaches
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
/*
* disable MMU stuff and caches
*/
//关闭MMU
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
mcr p15, 0, r0, c1, c0, 0
/* Peri port setup */
//外设基地址设置
ldr r0, =0x70000000
orr r0, r0, #0x13
mcr p15,0,r0,c15,c2,4 @ 256M(0x70000000-0x7fffffff)
//因为是只定义了6410，别的都忽略
#ifdef CONFIG_BOOT_ONENAND
ldr r0, =0x70000000 @ onenand controller setup
orr r0, r0, #0x100000
ldr r1, =0x4000
orr r1, r1, #0xe0
str r1, [r0]
//关闭6410的看门狗
#if defined(CONFIG_S3C6410) || defined(CONFIG_S3C6430)
orr r0, r0, #300 @ disable watchdog
mov r1, #1
str r1, [r0]
mov r1, #0x23000000 @ start buffer register
orr r1, r1, #0x30000
orr r1, r1, #0xc800
#else //不执行
mov r1, =0x20000000 @ start buffer register
orr r1, r1, #0xc30000
orr r1, r1, #0xc800
#endif
sub r0, r1, #0x0400 @ start address1 register
ldr r2, [r1, #0x84] @ ecc bypass
orr r2, r2, #0x100
str r2, [r1, #0x84]
mov r3, #0x0 @ DFS, FBA
str r3, [r0, #0x00]
str r3, [r0, #0x04] @ select dataram for DDP as 0
mov r4, #0x104 @ interrupt register
mov r5, #0x0002 @ FPA, FSA
mov r6, #0x0800 @ BSA
onenand_bl1_load:
str r5, [r0, #0x1c] @ save FPA, FSA
orr r6, r6, #0x02 @ BSC
str r6, [r1, #0x00] @ save BSA, BSC
str r3, [r1, r4] @ clear interrupt
str r3, [r1, #0x80] @ write load command
mov r7, #0x100 @ need small delay
onenand_wait_loop1:
subs r7, r7, #0x1
bne onenand_wait_loop1
add r5, r5, #0x2 @ next FPA, FSA
sub r6, r6, #0x2
add r6, r6, #0x200 @ next BSA
cmp r5, #0x8
bne onenand_bl1_load
#endif
/*
* Go setup Memory and board specific bits prior to relocation.
*/
bl lowlevel_init /* go setup pll,mux,memory */
/* when we already run in ram, we don't need to relocate U-Boot.
* and actually, memory controller must be configured before U-Boot
* is running in ram.
*/
ldr r0, =0xff000fff
bic r1, pc, r0 /* r0 <- current base addr of code */
ldr r2, _TEXT_BASE /* r1 <- original base addr in ram */
bic r2, r2, r0 /* r0 <- current base addr of code */
cmp r1, r2 /* compare r0, r1 */
beq after_copy /* r0 == r1 then skip flash copy */
//使用nandflash，此处忽略
#ifdef CONFIG_BOOT_NOR /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
ldr r1, _TEXT_PHY_BASE /* r1 <- destination */
ldr r2, _armboot_start
ldr r3, _bss_start
sub r2, r3, r2 /* r2 <- size of armboot */
add r2, r0, r2 /* r2 <- source end address */
nor_copy_loop:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end addreee [r2] */
ble nor_copy_loop
b after_copy
#endif
//从Nandflash启动，执行此处代码
#ifdef CONFIG_BOOT_NAND
mov r0, #0x1000
bl copy_from_nand
#endif
#ifdef CONFIG_BOOT_MOVINAND
ldr sp, _TEXT_PHY_BASE
bl movi_bl2_copy
b after_copy
#endif
//使用nandflash，此处忽略
#ifdef CONFIG_BOOT_ONENAND
ldr sp, =0x50000000 @ temporary stack
//设置地址并分配空间
#ifdef CONFIG_S3C6400
mov r1, =0x20000000 @ start buffer register
orr r1, r1, #0xc30000
orr r1, r1, #0xc800
#else
mov r1, #0x23000000 @ start buffer register
orr r1, r1, #0x30000
orr r1, r1, #0xc800
#endif
ldr r2, [r1, #0x84] @ ecc bypass
orr r2, r2, #0x100
str r2, [r1, #0x84]
sub r0, r1, #0x0400 @ start address1 register
str r3, [r0, #0x00]
str r3, [r0, #0x04] @ select dataram for DDP as 0
mov r4, #0x104 @ interrupt register
mov r6, #0x0c00 @ fixed dataram1 sector number
str r6, [r1, #0x00]
mov r3, #0x0 @ DFS, FBA
mov r5, #0x0000 @ FPA, FSA
ldr r9, =CFG_PHY_UBOOT_BASE @ destination
onenand_bl2_load:
str r3, [r0, #0x00] @ save DFS, FBA
str r5, [r0, #0x1c] @ save FPA, FSA
mov r7, #0x0 @ clear interrupt
str r7, [r1, r4]
str r7, [r1, #0x80] @ write load command
mov r8, #0x1000
onenand_wait_loop2:
subs r8, r8, #0x1
bne onenand_wait_loop2
onenand_wait_int: @ wait INT and RI
ldr r7, [r1, r4]
mov r8, #0x8000
orr r8, r8, #0x80
tst r7, r8
beq onenand_wait_int
mov r7, #0x0 @ clear interrupt
str r7, [r1, r4]
mov r8, #0xc00 @ source address (dataram1)
mov r10, #0x40 @ copy loop count (64 = 2048 / 32)
stmia sp, {r0-r7} @ backup
//把代码拷贝至DRAM
onenand_copy_to_ram:
ldmia r8!, {r0-r7}
stmia r9!, {r0-r7}
subs r10, r10, #0x1
bne onenand_copy_to_ram
ldmia sp, {r0-r7} @ restore
add r5, r5, #0x4 @ next FPA
cmp r5, #0x100 @ last FPA?
bne onenand_bl2_load
/* next block */
mov r5, #0x0 @ reset FPA
add r3, r3, #0x1 @ next FBA
cmp r3, #0x2 @ last FBA?
bne onenand_bl2_load
b after_copy
#endif
#ifdef CONFIG_BOOT_ONENAND_IROM
ldr sp, _TEXT_PHY_BASE
bl onenand_bl2_copy
b after_copy
#endif
//进入DRAM执行
after_copy:
#ifdef CONFIG_ENABLE_MMU
开MMU
enable_mmu:
/* enable domain access */
ldr r5, =0x0000ffff
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
/* Set the TTB register */
ldr r0, _mmu_table_base
ldr r1, =CFG_PHY_UBOOT_BASE
ldr r2, =0xfff00000
bic r0, r0, r2
orr r1, r0, r1
mcr p15, 0, r1, c2, c0, 0
/* Enable the MMU */
mmu_on:
mrc p15, 0, r0, c1, c0, 0
orr r0, r0, #1 /* Set CR_M to enable MMU */
mcr p15, 0, r0, c1, c0, 0
nop
nop
nop
nop
#endif
skip_hw_init:
/* Set up the stack */
stack_setup:
//分配堆栈
#ifdef CONFIG_MEMORY_UPPER_CODE
ldr sp, =(CFG_UBOOT_BASE + CFG_UBOOT_SIZE - 0xc)
#else
ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
#ifdef CONFIG_USE_IRQ
sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
#endif
sub sp, r0, #12 /* leave 3 words for abort-stack */
#endif
//将未初始化数据段_bss_start----_bss_end中的数据清零
clear_bss:
ldr r0, _bss_start /* find start of bss segment */
ldr r1, _bss_end /* stop here */
mov r2, #0x00000000 /* clear */
clbss_l:
str r2, [r0] /* clear loop... */
add r0, r0, #4
cmp r0, r1
ble clbss_l
ldr pc, _start_armboot
_start_armboot:
.word start_armboot
#ifdef CONFIG_ENABLE_MMU
_mmu_table_base:
.word mmu_table
#endif
/*
* copy U-Boot to SDRAM and jump to ram (from NAND or OneNAND)
* r0: size to be compared
* Load 1'st 2blocks to RAM because U-boot's size is larger than 1block(128k) size
*/
.globl copy_from_nand
//从NANDflash中拷贝8K以后的代码值DRAM
copy_from_nand:
mov r10, lr /* save return address */
mov r9, r0
/* get ready to call C functions */
ldr sp, _TEXT_PHY_BASE /* setup temp stack pointer */
sub sp, sp, #12
mov fp, #0 /* no previous frame, so fp=0 */
mov r9, #0x1000
bl copy_uboot_to_ram
3: tst r0, #0x0
bne copy_failed
ldr r0, =0x0c000000
ldr r1, _TEXT_PHY_BASE
1: ldr r3, [r0], #4
ldr r4, [r1], #4
teq r3, r4
bne compare_failed /* not matched */
subs r9, r9, #4
bne 1b
4: mov lr, r10 /* all is OK */
mov pc, lr
copy_failed:
nop /* copy from nand failed */
b copy_failed
compare_failed:
nop /* compare failed */
b compare_failed
/*
* we assume that cache operation is done before. (eg. cleanup_before_linux())
* actually, we don't need to do anything about cache if not use d-cache in U-Boot
* So, in this function we clean only MMU. by scsuh
*
* void theLastJump(void *kernel, int arch_num, uint boot_params);
*/
#ifdef CONFIG_ENABLE_MMU
.globl theLastJump
theLastJump:
mov r9, r0
ldr r3, =0xfff00000
ldr r4, _TEXT_PHY_BASE
adr r5, phy_last_jump
bic r5, r5, r3
orr r5, r5, r4
mov pc, r5
phy_last_jump:
/*
* disable MMU stuff
*/
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
mcr p15, 0, r0, c1, c0, 0
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
mov r0, #0
mov pc, r9
#endif
中断处理代码:
/*
*************************************************************************
*
* Interrupt handling
*
*************************************************************************
*/
//中断处理
@
@ IRQ stack frame.
@
#define S_FRAME_SIZE 72
#define S_OLD_R0 68
#define S_PSR 64
#define S_PC 60
#define S_LR 56
#define S_SP 52
#define S_IP 48
#define S_FP 44
#define S_R10 40
#define S_R9 36
#define S_R8 32
#define S_R7 28
#define S_R6 24
#define S_R5 20
#define S_R4 16
#define S_R3 12
#define S_R2 8
#define S_R1 4
#define S_R0 0
#define MODE_SVC 0x13
#define I_BIT 0x80
/*
* use bad_save_user_regs for abort/prefetch/undef/swi ...
* use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
*/
.macro bad_save_user_regs
sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
ldr r2, _armboot_start
sub r2, r2, #(CFG_MALLOC_LEN)
sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack
ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
add r5, sp, #S_SP
mov r1, lr
stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
mov r0, sp @ save current stack into r0 (param register)
.endm
.macro irq_save_user_regs
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0-r12
add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
stmdb r8, {sp, lr}^ @ Calling SP, LR
str lr, [r8, #0] @ Save calling PC
mrs r6, spsr
str r6, [r8, #4] @ Save CPSR
str r0, [r8, #8] @ Save OLD_R0
mov r0, sp
.endm
.macro irq_restore_user_regs
ldmia sp, {r0 - lr}^ @ Calling r0 - lr
mov r0, r0
ldr lr, [sp, #S_PC] @ Get PC
add sp, sp, #S_FRAME_SIZE
subs pc, lr, #4 @ return & move spsr_svc into cpsr
.endm
.macro get_bad_stack
ldr r13, _armboot_start @ setup our mode stack (enter in banked mode)
sub r13, r13, #(CFG_MALLOC_LEN) @ move past malloc pool
sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ move to reserved a couple spots for abort stack
str lr, [r13] @ save caller lr in position 0 of saved stack
mrs lr, spsr @ get the spsr
str lr, [r13, #4] @ save spsr in position 1 of saved stack
mov r13, #MODE_SVC @ prepare SVC-Mode
@ msr spsr_c, r13
msr spsr, r13 @ switch modes, make sure moves will execute
mov lr, pc @ capture return pc
movs pc, lr @ jump to next instruction & switch modes.
.endm
.macro get_bad_stack_swi
sub r13, r13, #4 @ space on current stack for scratch reg.
str r0, [r13] @ save R0's value.
ldr r0, _armboot_start @ get data regions start
sub r0, r0, #(CFG_MALLOC_LEN) @ move past malloc pool
sub r0, r0, #(CFG_GBL_DATA_SIZE+8) @ move past gbl and a couple spots for abort stack
str lr, [r0] @ save caller lr in position 0 of saved stack
mrs r0, spsr @ get the spsr
str lr, [r0, #4] @ save spsr in position 1 of saved stack
ldr r0, [r13] @ restore r0
add r13, r13, #4 @ pop stack entry
.endm
.macro get_irq_stack @ setup IRQ stack
ldr sp, IRQ_STACK_START
.endm
.macro get_fiq_stack @ setup FIQ stack
ldr sp, FIQ_STACK_START
.endm
/*
* exception handlers
*/
//几种工作模式
.align 5
undefined_instruction:
get_bad_stack
bad_save_user_regs
bl do_undefined_instruction
.align 5
software_interrupt:
get_bad_stack_swi
bad_save_user_regs
bl do_software_interrupt
.align 5
prefetch_abort:
get_bad_stack
bad_save_user_regs
bl do_prefetch_abort
.align 5
data_abort:
get_bad_stack
bad_save_user_regs
bl do_data_abort
.align 5
not_used:
get_bad_stack
bad_save_user_regs
bl do_not_used
#ifdef CONFIG_USE_IRQ
.align 5
irq:
get_irq_stack
irq_save_user_regs
bl do_irq
irq_restore_user_regs
.align 5
fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
bl do_fiq
irq_restore_user_regs
#else
.align 5
irq:
get_bad_stack
bad_save_user_regs
bl do_irq
.align 5
fiq:
get_bad_stack
bad_save_user_regs
bl do_fiq
#endif
.align 5
.global arm1136_cache_flush
arm1136_cache_flush:
mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
mov pc, lr @ back to caller
#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_CINTEGRATOR)
/* Use the IntegratorCP function from board/integratorcp/platform.S */
#elif defined(CONFIG_S3C64XX)
/* For future usage of S3C64XX*/
#else
.align 5
.globl reset_cpu
reset_cpu:
ldr r1, rstctl /* get addr for global reset reg */
mov r3, #0x2 /* full reset pll+mpu */
str r3, [r1] /* force reset */
mov r0, r0
_loop_forever:
b _loop_forever
rstctl:
.word PM_RSTCTRL_WKUP
#endif