SmartOS系统管理命令总结
原文转载自：http://blog.smartcore.net.au/smartos-command-line-fu/
本人CSDN博客不会将SmartOS的命令操作管理等作为重点讲解，一般来说这也只是管理员而非用户的操作。
所以这里转载一篇不错的SmartOS命令行的总结文章。希望对各位玩SmartOS的朋友有用。
各位若知道好的SmartOS的文章（最好是站在用户角度的文章）也可以告诉我：michaelcxw(AT)gmail(DOT)com
SmartOS is extremely powerful. A lot of its power can be unleashed and understood by familiarising ourselves with some of the inherent unix commands underpinning its solid foundation. Thankfully the folks at Joyent have eased this learning curve for us considerably by pre-bundling some utilities in SmartOS. These utilities, leverage the power of Dtrace, ZFS, Zones, virtual networking (Crossbow) and other unix utilities and makes them accessible to us via easy to run scripts.
In this post we will cover some of these bundled scripts as well as other Illumos / Solaris derived commands that I have found extremely useful in administering and understanding the SmartOS operating system environment. I am going to write this from a semi layman’s perspective making the assumption you are new to this environment and we are therefore just going to touch briefly on each concept without going too far down the technical rabbit hole.
ZFS
ZFS is an awesome enterprise grade, production proven and battle hardened file system. It ensures data integrity, resilience and consistency and prevents silent data corruption. SmartOS is built on top of ZFS and leverages some amazing features built into ZFS to give SmartOS some unique capabilities not available in other Virtual platforms. SmartOS uses local storage, this ensures that you have fastest IO to your disks and eliminates the network transport stack as a source of application latency. Some people dont like local storage and prefer SAN’s but I have seen too many horror’s unfold with shared SAN’s and know that this is a better approach. For instance most of the recent outages plaguing Amazon AWS has been due to shared storage issues. SmartOS creates a single pool called Zones where all your vm’s reside.
Q: Are my disks and ZFS pool healthy?
A: zpool status
[root@smartosn2 ~]# zpool status pool: zones state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zones ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 c0t10d0 ONLINE 0 0 0 c0t11d0 ONLINE 0 0 0 c0t9d0 ONLINE 0 0 0 errors: No known data errors
Q: Whats the RAW space on my zpool looking like?
A: zpool list
[root@smartosn2 ~]# zpool list NAME SIZE ALLOC FREE EXPANDSZ CAP DEDUP HEALTH ALTROOT zones 832G 67.9G 764G - 8% 1.00x ONLINE -
Q: Whats the USABLE space on my zfs volume looking like?
A: zfs list zones
[root@smartosn2 ~]# zfs list zones NAME USED AVAIL REFER MOUNTPOINT zones 60.9G 485G 518K /zones
Q: How do I switch on zfs compression for my entire SmartOS system and confirm its enabled?
A: zfs set compression=on zones && zfs get compression zones
[root@smartosn2 ~]# zfs set compression=on zones && zfs get compression zones NAME PROPERTY VALUE SOURCE zones compression on local
Q: What kind of data compression ratio am I getting?
A: zfs get compressratio zones
[root@smartosn2 ~]# zfs get compressratio zones NAME PROPERTY VALUE SOURCE zones compressratio 1.46x -
Q: What is my current zfs arc size?
A: kstat -p zfs:0:arcstats:size | cut -f2
[root@smartosn2 ~]# kstat -p zfs:0:arcstats:size | cut -f2 6000901680
Q: How can I watch my arc statistics in real-time?
A: arcstat 1 10
[root@smartos-node-1 ~]# arcstat 1 10
time read miss miss% dmis dm% pmis pm% mmis mm% arcsz c
06:34:59 0 0 0 0 0 0 0 0 0 13G 13G
06:35:00 966 45 4 45 4 0 0 3 42 13G 13G
06:35:01 1.3K 8 0 8 0 0 0 0 0 13G 13G
06:35:02 1.1K 18 1 18 1 0 0 0 0 13G 13G
06:35:03 993 28 2 28 2 0 0 1 8 13G 13G
06:35:04 1.9K 22 1 22 1 0 0 0 0 13G 13G
06:35:05 1.2K 19 1 19 1 0 0 1 100 13G 13G
06:35:06 1.1K 22 2 22 2 0 0 1 20 13G 13G
06:35:07 1.3K 7 0 7 0 0 0 0 0 13G 13G
06:35:08 677 4 0 4 0 0 0 0 0 13G 13G
Q: How much space are snapshots using on a specific Virtual Machine?
A: zfs list -o space zones/UUID-disk0
[root@smartosn2 ~]# zfs list -o space zones/0577f50a-f8ac-42fa-b68e-154ff58506b3-disk0 NAME AVAIL USED USEDSNAP USEDDS zones/0577f50a-f8ac-42fa-b68e-154ff58506b3-disk0 485G 1.61G 285M 1.33G
Q: How can I watch individual disk read and write operations?
A: zpool iostat -v zones 10
[root@smartos-node-1 ~]# zpool iostat -v zones 10
capacity operations bandwidth
pool alloc free read write read write
----------- ----- ----- ----- ----- ----- -----
zones 303G 2.95T 36 501 118K 9.41M
raidz1 303G 2.95T 36 501 118K 9.41M
c0t16d0 - - 22 137 27.0K 1.92M
c0t17d0 - - 20 136 24.3K 1.91M
c0t18d0 - - 22 137 27.0K 1.92M
c0t19d0 - - 20 136 24.4K 1.91M
c0t20d0 - - 22 137 27.0K 1.92M
c0t21d0 - - 20 136 24.3K 1.91M
cache - - - - - -
c2d0 112G 8M 17 4 287K 502K
----------- ----- ----- ----- ----- ----- -----
Q: How can I list specific VM attributes including disk Quotas?
A: vmadm list -o uuid,type,ram,nics.0.ip,quota,alias | grep -v KVM
[root@smartosn2 ~]# vmadm list -o uuid,type,ram,nics.0.ip,quota,alias | grep -v KVM UUID TYPE RAM NICS.0.IP QUOTA ALIAS 43c2f02a-711d-4284-a7e5-f0e61b2b02f3 OS 512 10.1.1.125 20 dnsmasq 4dfccd80-ed37-4906-8957-061d19125219 OS 512 10.1.1.86 10 standard64 6dd16a1c-0bd7-4243-a1d7-7184032be567 OS 2048 10.1.1.240 40 fifo 17510b88-b8fe-44fc-ad72-4a6f011d3ee4 OS 3072 10.1.1.130 20 confl-jira-dev
Q: How can I increase a Joyent branded VM’s disk space on the fly?
A: vmadm update UUID quota=X
[root@smartosn2 ~]# vmadm update 43c2f02a-711d-4284-a7e5-f0e61b2b02f3 quota=150 Successfully updated 43c2f02a-711d-4284-a7e5-f0e61b2b02f3
Q: How can I determine if any of my VM’s are being ZFS IO throttled? (d/s and del_t are very important)
A: vfsstat -M -Z 5
[root@smartos-node-1 ~]# vfsstat -M -Z 5 r/s w/s Mr/s Mw/s ractv wactv read_t writ_t %r %w d/s del_t zone 542.3 4.2 0.8 0.0 0.0 0.0 0.0 0.7 0 0 0.0 0.0 global (0) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 3b45ecfa (1) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 a04a5894 (2) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 befb49f3 (3) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 4c0ce8c9 (5) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 b90c54cd (6) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 90.0 100.0 a07ba0ca (7) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 25f82695 (9) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 d4e5b942 (10) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 29.3 9.7 633df8db (11) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 1.8 5.0 41a69306 (15) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 fifo (28) 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.0 0.0 3de9cab6 (29)
Q: How can I determine how BUSY my disks are? (%w and %b are very important)
A: iostat -xzn 5
[root@smartos-node-1 ~]# iostat -xzn 5
extended device statistics
r/s w/s kr/s kw/s wait actv wsvc_t asvc_t %w %b device
212.2 13.0 3609.6 1228.8 0.1 0.1 0.4 0.4 3 6 c2d0
132.6 352.6 368.3 5035.9 0.0 2.0 0.0 4.1 0 53 c0t16d0
130.6 351.8 367.2 5040.3 0.0 2.1 0.0 4.3 0 55 c0t17d0
129.2 356.0 356.3 5038.1 0.0 2.3 0.0 4.8 0 57 c0t18d0
126.4 356.0 355.9 5031.0 0.0 2.2 0.0 4.6 0 55 c0t19d0
130.6 352.8 377.6 5043.4 0.0 2.0 0.0 4.2 0 54 c0t20d0
134.4 353.2 372.7 5033.1 0.0 2.1 0.0 4.3 0 56 c0t21d0
Q: How can I see zfs file data raw page allocations?
A: echo ::memstat | mdb -k
[root@smartosn2 ~]# echo ::memstat | mdb -k Page Summary Pages MB %Tot ------------ ---------------- ---------------- ---- Kernel 692333 2704 19% ZFS File Data 1125020 4394 30% Anon 1624164 6344 44% Exec and libs 4558 17 0% Page cache 15350 59 0% Free (cachelist) 12484 48 0% Free (freelist) 217036 847 6% Total 3690945 14417 Physical 3690944 14417
Q: How can I determine if disk I/O is the source of a VM’s application latency?
A: ziostat -Z 5
[root@smartos-node-1 ~]# ziostat -Z 5
r/s kr/s actv wsvc_t asvc_t %b zone
0.0 0.0 0.0 0.0 0.0 0 global (0)
0.8 1.9 0.0 0.0 2.5 0 3b45ecfa (1)
1.0 0.5 0.0 0.0 6.4 0 a04a5894 (2)
1.2 6.6 0.0 0.0 1.3 0 befb49f3 (3)
0.0 0.0 0.0 0.0 0.0 0 4c0ce8c9 (5)
1.0 0.5 0.0 2.1 11.6 0 b90c54cd (6)
1.2 1.7 0.0 0.0 4.7 0 a07ba0ca (7)
0.0 0.0 0.0 0.0 0.0 0 25f82695 (9)
0.0 0.0 0.0 0.0 0.0 0 d4e5b942 (10)
2.8 16.5 0.0 0.0 1.5 0 633df8db (11)
0.0 0.0 0.0 0.0 0.0 0 41a69306 (15)
0.0 0.0 0.0 0.0 0.0 0 fifo (28)
0.0 0.0 0.0 0.0 0.0 0 3de9cab6 (29)
CPU and Memory
It is important to successfully diagnose if a problem or scaling issue you are experiencing is potentially CPU or Memory related.
Q: How can I check cpu and core count?
A: psrinfo -vp
[root@smartos-node-1 ~]# psrinfo -vp
The physical processor has 6 cores and 12 virtual processors (0 2 4 6 8 10 12 14 16 18 20 22)
The core has 2 virtual processors (0 12)
The core has 2 virtual processors (2 14)
The core has 2 virtual processors (4 16)
The core has 2 virtual processors (6 18)
The core has 2 virtual processors (8 20)
The core has 2 virtual processors (10 22)
x86 (GenuineIntel 206C2 family 6 model 44 step 2 clock 2400 MHz)
Intel(r) Xeon(r) CPU E5645 @ 2.40GHz
The physical processor has 6 cores and 12 virtual processors (1 3 5 7 9 11 13 15 17 19 21 23)
The core has 2 virtual processors (1 13)
The core has 2 virtual processors (3 15)
The core has 2 virtual processors (5 17)
The core has 2 virtual processors (7 19)
The core has 2 virtual processors (9 21)
The core has 2 virtual processors (11 23)
x86 (GenuineIntel 206C2 family 6 model 44 step 2 clock 2400 MHz)
Intel(r) Xeon(r) CPU E5645 @ 2.40GHz
Q: How do I look at my cpu statistics and check how balanced my core utilisation is?
A: mpstat 1 5
[root@smartos-node-1 ~]# mpstat 1 5 CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 0 9 0 23 2663 1122 10297 94 497 913 0 22367 5 14 0 81 1 491 0 22 2128 1025 2642 10 144 780 0 7103 5 11 0 84 2 0 0 14 2723 1302 5165 50 310 972 0 10080 2 14 0 84 3 0 0 32 2687 1291 3921 16 186 803 0 6525 2 9 0 89 4 253 0 7 190 61 2245 29 141 759 0 6756 3 7 0 90 5 0 0 19 1419 389 1959 19 127 665 0 2861 1 20 0 79 6 0 0 37 2740 1329 4803 32 198 833 0 10305 2 9 0 89 7 61 0 15 277 42 3240 8 145 701 0 8393 2 8 0 90 8 0 0 5 2626 1223 2577 37 139 669 0 4020 1 9 0 90 9 9 0 110 4771 4421 4185 45 379 1025 0 7759 2 12 0 86 10 0 0 280 4538 2182 4362 41 188 894 0 9750 2 9 0 89 11 1 0 11 150 39 2694 2 114 811 0 4371 2 9 0 89 12 1309 0 19 577 406 2891 38 147 675 0 9025 3 9 0 88 13 13 0 16 981 804 3342 12 119 729 0 7746 2 9 0 89 14 1 0 6 659 277 2100 25 133 798 0 4311 1 7 0 92 15 0 0 6 890 428 1470 6 94 736 0 2399 1 6 0 93 16 0 0 5 2452 1191 3792 21 183 922 0 8583 1 7 0 92 17 0 0 17 585 256 1709 16 145 838 0 3477 1 9 0 90 18 0 0 5 2300 1115 3212 34 140 696 0 6565 1 7 0 92 19 0 0 16 122 35 912 8 85 568 0 1873 1 5 0 94 20 0 0 10 3959 1640 4985 52 190 798 0 6366 1 11 0 88 21 0 0 20 182 53 3446 8 137 636 0 6862 2 9 0 89 22 0 0 5 90 17 2609 31 109 670 0 4204 1 6 0 93 23 160 0 45 5736 2823 4068 9 141 716 0 4063 2 10 0 88
Q: How much memory does my system have?
A: prtconf | head -3 | grep Mem
[root@smartos-node-1 ~]# prtconf | head -3 | grep Mem Memory size: 47184 Megabytes
Q: How can I see my virtual memory statistics?
A: vmstat
[root@smartos-node-1 ~]# vmstat kthr memory page disk faults cpu r b w swap free re mf pi po fr de sr cd lf rm s0 in sy cs us sy id 0 0 0 26318348 1403084 304 2631 0 0 0 0 0 22 0 -1327 15 43058 171189 78397 2 5 93
Q: How can I see process statistics for my system and Virtual machine Zones?
A: prstat -Z
[root@smartos-node-1 ~]# prstat -Z
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
18934 root 2098M 2086M sleep 58 0 550:06:58 1.1% qemu-system-x86/6
3095 root 553M 541M cpu12 59 0 297:38:25 0.6% qemu-system-x86/5
4308 root 8288M 8276M sleep 1 0 294:55:12 0.6% qemu-system-x86/10
3576 root 1066M 1054M sleep 9 0 202:31:31 0.4% qemu-system-x86/4
3332 root 554M 542M cpu3 59 0 161:32:02 0.4% qemu-system-x86/5
3820 root 1838M 1826M cpu3 59 0 177:06:17 0.3% qemu-system-x86/5
4064 root 4151M 4139M sleep 59 0 173:47:37 0.3% qemu-system-x86/5
2921 root 60M 42M sleep 57 0 107:22:27 0.3% beam.smp/29
431 root 0K 0K sleep 99 -20 181:10:13 0.2% zpool-zones/182
3217 root 553M 541M sleep 59 0 94:06:46 0.2% qemu-system-x86/5
4186 root 4181M 4170M sleep 59 0 45:10:47 0.1% qemu-system-x86/10
41370 root 72M 59M sleep 51 0 3:42:33 0.0% beam.smp/29
3003 root 3780K 1564K sleep 59 0 17:57:04 0.0% inet_gethost/1
3698 root 1077M 1065M sleep 1 0 16:36:27 0.0% qemu-system-x86/6
41391 root 50M 32M sleep 44 0 2:00:26 0.0% beam.smp/29
41414 root 53M 38M sleep 56 0 1:43:15 0.0% beam.smp/29
36531 root 3924K 1356K sleep 48 0 0:00:02 0.0% inet_gethost/1
49738 root 1120M 1108M sleep 49 0 1:27:49 0.0% qemu-system-x86/4
ZONEID NPROC SWAP RSS MEMORY TIME CPU ZONE
15 2 2098M 2086M 4.4% 550:06:58 1.1% 41a69306-0ed6-40e9-a91e-05794421cb5b
1 2 553M 541M 1.1% 297:38:25 0.6% 3b45ecfa-7c74-459e-8534-00d1f79a07ea
11 2 8288M 8276M 18% 294:55:12 0.6% 633df8db-46ab-47b0-8c7a-b38f8b90e2d5
0 88 555M 326M 0.5% 323:12:37 0.6% global
5 2 1066M 1054M 2.2% 202:31:31 0.4% 4c0ce8c9-432e-48a4-80b3-579e3ff11cf0
3 2 554M 542M 1.1% 161:32:02 0.4% befb49f3-8f9f-404a-9683-b64b94005423
7 2 1838M 1826M 3.9% 177:06:17 0.3% a07ba0ca-bc6b-4703-95ba-4b395c68947a
9 2 4151M 4139M 8.8% 173:47:37 0.3% 25f82695-85d0-446a-b017-5f00789e94e5
Total: 155 processes, 836 lwps, load averages: 1.58, 1.59, 1.73
Q: How can I determine if my virtual machines are running out of memory?
A: zonememstat
[root@smartosn2 ~]# zonememstat
ZONE RSS(MB) CAP(MB) NOVER POUT(MB)
global 170 - - -
1e0bdc72-3d06-4aaa-819c-062c26621c77 1057 2048 0 0
dd889ecd-2fdc-4e04-be8c-27acde8c6808 556 1536 0 0
6a1618dc-586c-4529-96d6-b957a893c52a 538 1536 0 0
e3c4387c-4d54-4c40-811d-0423668e49c8 1052 2048 0 0
0577f50a-f8ac-42fa-b68e-154ff58506b3 1089 2048 0 0
fifo 280 2048 0 0
17510b88-b8fe-44fc-ad72-4a6f011d3ee4 2555 3072 0 0
Q: How do I see what is using SWAP?
A: ps -eo pid,comm,vsz | sort -nk3
[root@smartosn2 ~]# ps -eo pid,comm,vsz | sort -nk3
0 sched 0
2 pageout 0
3 fsflush 0
4 kcfpoold 0
421 zpool-zones 0
PID COMMAND VSZ
3400 zsched 0
3428 zsched 0
3523 zsched 0
3784 zsched 0
3845 zsched 0
6977 zsched 0
17010 zsched 0
2630 /usr/lib/utmpd 1632
7372 /usr/lib/utmpd 1632
17380 /usr/lib/utmpd 1632
95 /usr/bin/ctrun 1772
2945 /usr/bin/ctrun 1776
7363 /usr/lib/pfexecd 1832
2698 /usr/lib/vtdaemon 1840
17367 /usr/sbin/cron 1852
. . .
Q: How do I see where all my system memory is being allocated?
A: echo ::memstat | mdb -k
[root@smartos-node-1 ~]# echo ::memstat | mdb -k Page Summary Pages MB %Tot ------------ ---------------- ---------------- ---- Kernel 4330552 16916 36% ZFS File Data 445887 1741 4% Anon 6588558 25736 55% Exec and libs 3697 14 0% Page cache 253315 989 2% Free (cachelist) 179059 699 1% Free (freelist) 275855 1077 2% Total 12076923 47175 Physical 12076921 47175
Q: How do I examine a specific VM’s zone to see what process is using RSS / memory?
A: prstat -s rss -z 12
[root@smartosn2 ~]# prstat -s rss -z 12 PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP 7499 root 49M 39M sleep 59 0 1:21:02 0.2% beam.smp/9 7562 root 44M 34M sleep 55 0 0:29:32 0.1% beam.smp/9 7517 root 36M 27M sleep 59 0 0:31:48 0.1% beam.smp/9 7547 webservd 27M 17M sleep 43 0 0:00:05 0.0% httpd/8 7548 webservd 27M 17M sleep 43 0 0:00:05 0.0% httpd/8 7549 webservd 27M 17M sleep 43 0 0:00:05 0.0% httpd/8 7550 webservd 27M 17M sleep 43 0 0:00:05 0.0% httpd/8 7551 webservd 27M 17M sleep 43 0 0:00:05 0.0% httpd/8 7071 root 9408K 8260K sleep 29 0 0:00:06 0.0% svc.configd/13 7540 root 17M 7232K sleep 59 0 0:00:06 0.0% httpd/1 7598 webservd 19M 5888K sleep 43 0 0:00:00 0.0% httpd/1 7594 webservd 19M 5884K sleep 43 0 0:00:00 0.0% httpd/1 7596 webservd 19M 5884K sleep 43 0 0:00:00 0.0% httpd/1 7597 webservd 19M 5884K sleep 43 0 0:00:00 0.0% httpd/1 7595 webservd 19M 5876K sleep 43 0 0:00:00 0.0% httpd/1 7068 root 7076K 5284K sleep 59 0 0:00:03 0.0% svc.startd/12 7195 root 6052K 3648K sleep 59 0 0:00:05 0.0% nscd/27 7365 root 4204K 2704K sleep 59 0 0:00:00 0.0% inetd/3 7123 netadm 3976K 2696K sleep 59 0 0:00:00 0.0% ipmgmtd/3 7420 root 4700K 2632K sleep 59 0 0:01:19 0.0% redis-server/3 7542 webservd 16M 2380K sleep 59 0 0:00:00 0.0% httpd/1 7373 root 3276K 2356K sleep 30 0 0:00:00 0.0% rsyslogd/5 7408 root 4020K 1600K sleep 59 0 0:00:00 0.0% sshd/1 7036 root 2136K 1552K sleep 59 0 0:00:00 0.0% init/1 Total: 45 processes, 164 lwps, load averages: 0.24, 0.24, 0.23
Q: How do I see my interrupt statistics?
A: intrstat
[root@smartosn2 ~]# intrstat
device | cpu0 %tim cpu1 %tim cpu2 %tim cpu3 %tim
-------------+------------------------------------------------------------
e1000g#0 | 0 0.0 1 0.0 0 0.0 0 0.0
ehci#0 | 0 0.0 0 0.0 0 0.0 0 0.0
ehci#1 | 0 0.0 0 0.0 0 0.0 0 0.0
mpt#0 | 0 0.0 0 0.0 0 0.0 0 0.0
rge#0 | 0 0.0 239 0.2 0 0.0 0 0.0
Q: How do I see what is using a specific interrupt?
A: echo ::interrupts | mdb -k
[root@smartosn2 ~]# echo ::interrupts | mdb -k IRQ Vect IPL Bus Trg Type CPU Share APIC/INT# ISR(s) 9 0x80 9 PCI Lvl Fixed 1 1 0x0/0x9 acpi_wrapper_isr 18 0x81 9 PCI Lvl Fixed 2 1 0x0/0x12 ehci_intr 23 0x82 9 PCI Lvl Fixed 3 1 0x0/0x17 ehci_intr 24 0x60 6 PCI Edg MSI 1 1 - rge_intr 25 0x40 5 PCI Edg MSI 3 1 - mpt_intr 26 0x61 6 PCI Edg MSI 1 1 - e1000g_intr_pciexpress 32 0x20 2 Edg IPI all 1 - cmi_cmci_trap 160 0xa0 0 Edg IPI all 0 - poke_cpu 208 0xd0 14 Edg IPI all 1 - kcpc_hw_overflow_intr 209 0xd1 14 Edg IPI all 1 - cbe_fire 210 0xd3 14 Edg IPI all 1 - cbe_fire 240 0xe0 15 Edg IPI all 1 - xc_serv 241 0xe1 15 Edg IPI all 1 - apic_error_intr
Q: Is there an easy way to get a complete overview of my SmartOS system?
A: sysinfo
[root@smartos-node-1 ~]# sysinfo
{
"Live Image": "20120726T184637Z",
"System Type": "SunOS",
"Boot Time": "1344477862",
"Manufacturer": "Intel Corporation",
"Product": "S5520UR",
"Serial Number": "............",
"VM Capable": true,
"CPU Type": "Intel(R) Xeon(R) CPU E5645 @ 2.40GHz",
"CPU Virtualization": "vmx",
"CPU Physical Cores": 2,
"UUID": "92bc54eb-a652-11e0-a095-001e671d5838",
"Hostname": "smartos-node-1",
"CPU Total Cores": 24,
"MiB of Memory": "47184",
"Zpool": "zones",
"Zpool Disks": "c0t16d0,c0t17d0,c0t18d0,c0t19d0,c0t20d0,c0t21d0,c2d0",
"Zpool Profile": "raidz",
"Zpool Size in GiB": 2719,
"Disks": {
"c0t16d0": {"Size in GB": 600},
"c0t17d0": {"Size in GB": 600},
"c0t18d0": {"Size in GB": 600},
"c0t19d0": {"Size in GB": 600},
"c0t20d0": {"Size in GB": 600},
"c0t21d0": {"Size in GB": 600},
"c2d0": {"Size in GB": 120}
},
"Boot Parameters": {
"console": "text",
"root_shadow": "$5$2XXXRnK3$NvLlm.1KYYYB0WjoP7xcIwGnllzzzzHnT.mDO7DpxYA",
"smartos": "true"
},
"Network Interfaces": {
"igb0": {"MAC Address": "00:1e:67:1d:58:38", "ip4addr": "172.16.5.95", "Link Status": "up", "NIC Names": ["admin"]},
"igb1": {"MAC Address": "00:1e:67:1d:58:39", "ip4addr": "", "Link Status": "unknown", "NIC Names": []}
},
"Virtual Network Interfaces": {
}
}
Networking
Q: How do I see the status of the Network interfaces in my system?
A: dladm show-phys
[root@smartos-node-1 ~]# dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE igb0 Ethernet up 1000 full igb0 igb1 Ethernet unknown 0 half igb1
Q: How do I see the MAC addresses of the Network interfaces in my system?
A: dladm show-phys -m
[root@smartos-node-1 ~]# dladm show-phys -m LINK SLOT ADDRESS INUSE CLIENT igb0 primary 0:1e:67:1d:58:38 yes igb0 igb1 primary 0:1e:67:1d:58:39 no --
Q: How do I list my systems Virtual Network interfaces and see which zone they belong to?
A: dladm show-vnic
[root@smartos-node-1 ~]# dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID ZONE net0 igb0 0 b2:f2:42:c0:5e:15 fixed 0 3b45ecfa-7c74-459e-8534-00d1f79a07ea net0 igb0 0 b2:56:3f:3:37:d fixed 0 a04a5894-ac82-4b3d-b1b7-2fa1dcc7d0e3 net0 igb0 0 b2:7d:78:4:83:15 fixed 0 befb49f3-8f9f-404a-9683-b64b94005423 net0 igb0 0 b2:d1:cb:37:e4:6f fixed 0 4c0ce8c9-432e-48a4-80b3-579e3ff11cf0 net0 igb0 0 b2:be:3d:6f:22:e7 fixed 0 b90c54cd-bef6-4f2f-8701-e2c2a794dbe4 net0 igb0 0 b2:7f:9a:b2:85:3f fixed 0 a07ba0ca-bc6b-4703-95ba-4b395c68947a net0 igb0 0 b2:6c:f1:e5:b9:c8 fixed 0 25f82695-85d0-446a-b017-5f00789e94e5 net0 igb0 0 b2:94:18:77:4f:b8 fixed 0 d4e5b942-7edd-41bd-8e2c-f11259adfe28 net0 igb0 0 b2:43:c0:92:82:1 fixed 0 633df8db-46ab-47b0-8c7a-b38f8b90e2d5 net0 igb0 0 b2:f5:69:fc:8:ca fixed 0 41a69306-0ed6-40e9-a91e-05794421cb5b net0 igb0 0 c2:d3:e4:57:55:ea fixed 0 fifo net0 igb0 0 c2:81:e:6d:fb:66 fixed 0 3de9cab6-a810-492d-9b1d-836ccdcd7022
Q: Where do I configure additional Network interfaces or vlans?
A: /usbkey/config
[root@smartos-node-1 ~]# cat /usbkey/config admin_nic=0:1e:67:1d:58:38 admin_ip=dhcp admin_netmask= admin_network=... admin_gateway=dhcp headnode_default_gateway= dns_resolvers=8.8.8.8,8.8.4.4 dns_domain= ntp_hosts=pool.ntp.org compute_node_ntp_hosts=dhcp
Q: How do I watch my Network interface packet statistics in real-time? (first line entry is total packets)
A: netstat -I igb0 1 6
input igb0 output input (Total) output packets errs packets errs colls packets errs packets errs colls 763052430 0 1751855307 0 0 764740603 0 1753543480 0 0 708 0 224 0 0 708 0 224 0 0 628 0 158 0 0 628 0 158 0 0 784 0 307 0 0 784 0 307 0 0 780 0 316 0 0 780 0 316 0 0 787 0 328 0 0 787 0 328 0 0
I hope you have found the above information useful.
Hopefully in the next article we can dive a bit deeper into Dtrace and some general scripting as well as snapshot creation and management etc.