K-Touch W700刷机失败
Fri, November 18, 2011: 18:17.47 PM ======[nvflash_main] Context ---> 0x12ed98 ,
Fri, November 18, 2011: 18:17.47 PM
======nvflash_dispatch -- ConfigFile : D:\k-touch_w700\SunnyKale-w700-rom\flash.cfg
Fri, November 18, 2011: 18:17.47 PM
======nvflash_dispatch -- BctFile : D:\k-touch_w700\SunnyKale-w700-rom\flash.bct
Fri, November 18, 2011: 18:17.47 PM
======nvflash_dispatch -- bootloader_file : D:\k-touch_w700\SunnyKale-w700-rom\bootloader.bin
Fri, November 18, 2011: 18:17.47 PM
====== nvflash_configfile --D:\k-touch_w700\SunnyKale-w700-rom\flash.cfg
Fri, November 18, 2011: 18:17.47 PM
====== nvflash_configfile --NvFlashConfigFileParse ok
Fri, November 18, 2011: 18:17.47 PM
====== nvflash_configfile --NvFlashConfigListDevices ok
Fri, November 18, 2011: 18:17.47 PM
Fri, November 18, 2011: 18:17.47 PM dk burned: false
Fri, November 18, 2011: 18:17.47 PM boot device: emmc
Fri, November 18, 2011: 18:17.47 PM sending file: D:\k-touch_w700\SunnyKale-w700-rom\flash.bct
Fri, November 18, 2011: 18:17.47 PM load address: 0x108000 entry point: 0x108000
Fri, November 18, 2011: 18:17.47 PM sending file: D:\k-touch_w700\SunnyKale-w700-rom\bootloader.bin
Fri, November 18, 2011: 18:17.48 PM waiting for bootloader to initialize
Fri, November 18, 2011: 18:17.49 PM bootloader downloaded successfully
Fri, November 18, 2011: 18:17.49 PM
======nvflash_cmd_create --
Fri, November 18, 2011: 18:17.49 PM
======nvflash_cmd_create -- Nv3pCommand_StartPartitionConfiguration
Fri, November 18, 2011: 18:17.49 PM setting device: 2 3
Fri, November 18, 2011: 18:17.49 PM Creating partition: BCT
Fri, November 18, 2011: 18:17.49 PM ======[nvflash_cmd_create] Fail : CreatePartition failure
Fri, November 18, 2011: 18:17.49 PM command failure: create failed
Fri, November 18, 2011: 18:17.49 PM command failure: bad data
Fri, November 18, 2011: 18:17.50 PM bootloader status: failed to create the partition (code: 10) message: nverror:0x42008 (0x6042008) flags: 0
Fri, November 18, 2011: 18:17.50 PM ======[nvflash_main] Fail :(
然后机器就显示
网上搜了一下也有人碰到同样的问题
http://www.592zn.net/viewthread.php?action=printable&tid=139532
我将手机电池拆下来放了一个周末，再把电池装回去，奇迹出现了，W700又能够正常启动了。不过不稳定，很容易死机，死机之后直接拔电池不能马上启动，还要将电池取下来放一段时间，可能是需要放电，才能将机器恢复到正常状态。是不是我装了什么软件导致死机，还需要进一步确认一下。