WINCE下保存注册表疑问和网络测试注意事项

WINCE下保存注册表疑问和网络测试注意事项

(一)想在WINCE下实现冷启动保存注册表,参照帮助用hive-based registry实现,可是存在疑问.
在CF卡上实现断电保存注册表,使用的是CE5.0,定制时加入了HIVE项,在platform.reg里加入了以下字段:

; HIVE BOOT SECTION                   (系统启动时的识别关键字)
 [HKEY_LOCAL_MACHINE\init\BootVars]
  "SystemHive"="Documents and Settings\\system.hv"
  "Startup DevMgr"=dword:1
"Registryflags"=dword:1                         (修改后关闭时自动刷新从而保存)

[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]        (文件系统)
    "FriendlyName"="FAT FileSystem"
    "Dll"="fatfsd.dll"
    "Flags"=dword:00000064
    "Paging"=dword:1
    "EnableCache"=dword:1
    "CacheSize"=dword:0
    "Util"="fatutil.dll"
    "CacheDll"="diskcache.dll"
    "Flags"=dword:1000                                (只加载一次文件驱动)

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]    (存储驱动)

"MountAsBootable"=dword:1                        (帮助里说CE5.0忽略了Mountflags关键字)

; END HIVE BOOT SECTION

还是没有实现HIVE功能,哪里没有做到位?

而我尝试了这样修改platform.reg
;registry
  ; HIVE BOOT SECTION
    [HKEY_LOCAL_MACHINE\init\BootVars]
       "SYSTEMHIVE"="Documents and Settings\\system.hv"
       "PROFILEDIR"="Documents and Settings"
       "Start DevMgr"=dword:0
    IF BSP_ENABLE_FSREGHIVE  
       "Start DevMgr"=dword:1
    ENDIF  
    [HKEY_LOCAL_MACHINE\init\BootVars]
        "DefaultUser"="default"
    [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]
        "MountFlags"=dword:2
    ; END HIVE BOOT SECTION

修改project.reg
;registry
  [HKEY_LOCAL_MACHINE\init\BootVars]
  "SystemHive"="Documents and Settings\\system.hv"
  "Startup DevMgr"=dword:1

  ; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
    "FriendlyName"="FAT FileSystem"
    "Dll"="fatfsd.dll"
    "Flags"=dword:00000064
    "Paging"=dword:1
    "EnableCache"=dword:1
    "CacheSize"=dword:0
    "Util"="fatutil.dll"
    "CacheDll"="diskcache.dll"

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]
  

"Mountflags"=dword:2

; END HIVE BOOT SECTION

实现了冷启动的注册表保存.问题待分析...

(二)加入以太网项和驱动后用ping命令发现返回 error 1100,后来找到是防火墙要关掉才能ping通