OMAP uEnv.txt

 

the older version's of u-boot used boot.scr to set boot parameter

----------------------------------------------------------

setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait omapfb.mode=dvi:1280x1024MR-32 at 60 vram=12M' setenv bootcmd 'mmc init; fatload mmc 0 80000000 uImage; bootm 80000000'

boot

----------------------------------------------------------

 

Newer version's of u-boot now look for a uEnv.txt file to set boot parameter

----------------------------------------------------------

mpurate=1000
dvimode=800x600MR-16@60
vram=4MB
bootargs "console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait ro
vram=${vram} omapfb.mode=dvi:${dvimode} omapfb.vram=0:2M,1:2M mem=208M@0x80000000"
boot

----------------------------------------------------------

By default, the frame buffer is only allocated for /dev/fb0. Option vram should be specified in u-boot bootargs variable to allocate frame buffer for /dev/fb1. For example:

   vram=8M omapfb.vram=4M,4M