POJ3522:Slim Span

POJ3522:Slim Span

Slim Span Time Limit: 5000MS Memory Limit: 65536K Total Submissions: 4023 Accepted: 2116 Description Given an undirected weighted graph G, you should find one of spanning trees specified as follows. The graph G is an ordered pair (V, E), where V is a set of vertices {v1, v2, …, vn} and E is a set of undirected edges {e1, e2, …, em}. Each edge e ∈ E has its weight w(e). A spanning tree T is a tree (a connected subgraph without cycles) which connects all the n vertices with n − 1 edges. The slimness of a spanning tree T is defined as the difference between the largest weight and the smallest weight among the n − 1 edges of T. Figure 5: A graph  G and the weights of the edges For example, a graph G in Figure 5(a) has four vertices {v1, v2, v3, v4} and five undirected edges {e1, e2, e3, e4, e5}. The weights of the edges are w(e1) = 3, w(e2) = 5, w(e3) = 6, w(e4) = 6, w(e5) = 7 as shown in Figure 5(b). Figure 6: Examples of the spanning trees of  G There are several spanning trees for G. Four of them are depicted in Figure 6(a)~(d). The spanning tree Ta in Figure 6(a) has three edges whose weights are 3, 6 and 7. The largest weight is 7 and the smallest weight is 3 so that the slimness of the tree Ta is 4. The slimnesses of spanning trees Tb, Tc and Td shown in Figure 6(b), (c) and (d) are 3, 2 and 1, respectively. You can easily see the slimness of any other spanning tree is greater than or equal to 1, thus the spanning tree Td in Figure 6(d) is one of the slimmest spanning trees whose slimness is 1. Your job is to write a program that computes the smallest slimness. Input The input consists of multiple datasets, followed by a line containing two zeros separated by a space. Each dataset has the following format. n m a1 b1 w1 ⋮ am bm wm Every input item in a dataset is a non-negative integer. Items in a line are separated by a space. n is the number of the vertices and m the number of the edges. You can assume 2 ≤ n ≤ 100 and 0 ≤ m ≤ n(n − 1)/2. ak and bk (k = 1, …, m) are positive integers less than or equal to n, which represent the two vertices vak and vbk connected by the kth edge ek. wk is a positive integer less than or equal to 10000, which indicates the weight of ek. You can assume that the graph G = (V, E) is simple, that is, there are no self-loops (that connect the same vertex) nor parallel edges (that are two or more edges whose both ends are the same two vertices). Output For each dataset, if the graph has spanning trees, the smallest slimness among them should be printed. Otherwise, −1 should be printed. An output should not contain extra characters. Sample Input 4 5 1 2 3 1 3 5 1 4 6 2 4 6 3 4 7 4 6 1 2 10 1 3 100 1 4 90 2 3 20 2 4 80 3 4 40 2 1 1 2 1 3 0 3 1 1 2 1 3 3 1 2 2 2 3 5 1 3 6 5 10 1 2 110 1 3 120 1 4 130 1 5 120 2 3 110 2 4 120 2 5 130 3 4 120 3 5 110 4 5 120 5 10 1 2 9384 1 3 887 1 4 2778 1 5 6916 2 3 7794 2 4 8336 2 5 5387 3 4 493 3 5 6650 4 5 1422 5 8 1 2 1 2 3 100 3 4 100 4 5 100 1 5 50 2 5 50 3 5 50 4 1 150 0 0 Sample Output 1 20 0 -1 -1 1 0 1686 50 Source Japan 2007

题目就是生成一棵树，要求边权最大减最小的差最小。
根据Kruskal思想，把边排序，之后枚举一下就行了。

代码：

#include  < cmath >
#include  < cstdio >
#include  < cstdlib >
#include  < cstring >
#include  < iostream >
#include  < algorithm >
using   namespace  std;

const   int  M  =   5005 ;
const   int  INF  =   1   <<   29 ;

struct  edge
{
     int  st, ed, w;
     bool   operator   <  (edge a)  const
    {
         return  w  <  a.w;
    }
} e[M];

int  n, m, ans, num, temp;
int  f[ 105 ], rank[ 105 ];

void  makeset()
{
     for  ( int  i  =   1 ; i  <=  n;  ++ i)
        f[i]  =  i;
    memset(rank,  0 ,  sizeof (rank));
}

int  find( int  x)
{
     while  (f[x]  !=  x) x  =  f[x];
     return  x;
}

void  unionset( int  a,  int  b)
{
     int  p  =  find(a);
     int  q  =  find(b);
     if  (rank[p]  >  rank[q])
        f[q]  =  p;
     else
     if  (rank[p]  <  rank[q])
        f[p]  =  q;
     else
    {
        f[p]  =  q;
        rank[q] ++ ;
    }
}

void  kruskal()
{
    ans  =  INF;
     for  ( int  i  =   0 ; i  <  m  -  n  +   2 ;  ++ i)
    {
        makeset();
        temp  =   - 1 ;
        num  =   0 ;
         for  ( int  j  =  i; j  <  m;  ++ j)
        {
             if  (find(e[j].st)  !=  find(e[j].ed))
            {
                num ++ ;
                unionset(e[j].st, e[j].ed);
                 if  (num  ==  n  -   1 )
                {
                    temp  =  e[j].w  -  e[i].w;
                     break ;
                }
            }
        }
         if  (temp  ==   - 1 )  break ;
         if  (temp  !=   - 1   &&  temp  <  ans) ans  =  temp;
    }
     if  (ans  >=  INF) printf( " -1\n " );
     else  printf( " %d\n " , ans);
}

int  main()
{
     while  (scanf( " %d%d " ,  & n,  & m), n  ||  m)
    {
         for  ( int  i  =   0 ; i  <  m;  ++ i)
            scanf( " %d%d%d " ,  & e[i].st,  & e[i].ed,  & e[i].w);
        sort(e, e  +  m);
        kruskal();
    }
     return   0 ;
}