RAC无法启动，报错terminating instance due to error 304

今天在做一个change的时候，change的内容本身比较简单，就是将控制文件冗余到不同的mount point去，当alter system control_file scope=spfile之后，关闭RAC，mv控制文件，将之再次启动，使得spfile中指向的新路径的控制文件生效。问题出在了关闭RAC之后，数据库就启动不了了。

我们从关闭RAC开始，看看当时的场景。

oracle@vus029pa:SIAP1:/opt/app/oracle/admin $ srvctl stop database -d SIAP

同时我们tail -f节点1和节点2上的alertlog，发现节点2是很快很顺利的关闭了，但是节点1迟迟未关闭。

节点2的alertlog：

Sat Jun 02 14:04:45 GMT 2012
Shutting down instance (immediate)
Sat Jun 02 14:04:45 GMT 2012
Shutting down instance: further logons disabled
Sat Jun 02 14:04:49 GMT 2012
Stopping background process CJQ0
Sat Jun 02 14:04:49 GMT 2012
Stopping background process QMNC
Sat Jun 02 14:04:51 GMT 2012
Stopping background process MMNL
Sat Jun 02 14:04:52 GMT 2012
Stopping background process MMON
License high water mark = 1004
Sat Jun 02 14:04:53 GMT 2012
Job queue slave processes stopped
Sat Jun 02 14:05:59 GMT 2012
ALTER DATABASE CLOSE NORMAL
Sat Jun 02 14:05:59 GMT 2012
SMON: disabling tx recovery
SMON: disabling cache recovery
Sat Jun 02 14:06:00 GMT 2012
Shutting down archive processes
Archiving is disabled
Sat Jun 02 14:06:05 GMT 2012
ARCH shutting down
ARC9: Archival stopped
Sat Jun 02 14:06:10 GMT 2012
ARCH shutting down
ARC8: Archival stopped
Sat Jun 02 14:06:15 GMT 2012
ARCH shutting down
ARC7: Archival stopped
Sat Jun 02 14:06:21 GMT 2012
ARCH shutting down
ARC6: Archival stopped
Sat Jun 02 14:06:31 GMT 2012
ARCH shutting down
ARC4: Archival stopped
Sat Jun 02 14:06:36 GMT 2012
ARCH shutting down
ARC3: Archival stopped
Sat Jun 02 14:06:46 GMT 2012
ARCH shutting down
ARC1: Archival stopped
Sat Jun 02 14:06:51 GMT 2012
ARCH shutting down
Sat Jun 02 14:06:51 GMT 2012
ARC5: Becoming the 'no FAL' ARCH
Sat Jun 02 14:06:51 GMT 2012
ARC0: Archival stopped
Sat Jun 02 14:06:51 GMT 2012
ARC5: Becoming the 'no SRL' ARCH
ARC5: Archiving disabled
Sat Jun 02 14:06:51 GMT 2012
ARCH shutting down
ARC5: Archival stopped
Sat Jun 02 14:06:51 GMT 2012
ARC2: Becoming the heartbeat ARCH
Sat Jun 02 14:06:58 GMT 2012
Thread 2 closed at log sequence 21703
Successful close of redo thread 2
Sat Jun 02 14:07:26 GMT 2012
Completed: ALTER DATABASE CLOSE NORMAL
Sat Jun 02 14:07:26 GMT 2012
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Sat Jun 02 14:07:33 GMT 2012
freeing rdom 0

在14：07左右节点2就关闭了。

节点1的alertlog：

Sat Jun 02 14:04:52 GMT 2012
Shutting down instance (immediate)
Sat Jun 02 14:04:52 GMT 2012
Shutting down instance: further logons disabled
Sat Jun 02 14:04:54 GMT 2012
Stopping background process CJQ0
Sat Jun 02 14:04:54 GMT 2012
Stopping background process QMNC
Sat Jun 02 14:04:56 GMT 2012
Stopping background process MMNL
Sat Jun 02 14:04:57 GMT 2012
Stopping background process MMON
License high water mark = 1417
Sat Jun 02 14:04:58 GMT 2012
Job queue slave processes stopped
Sat Jun 02 14:12:41 GMT 2012
IPC Send timeout detected.Sender: ospid 14002
Receiver: inst 2 binc 379475 ospid 17274
Sat Jun 02 14:12:42 GMT 2012
IPC Send timeout to 1.0 inc 4 for msg type 8 from opid 33
Sat Jun 02 14:12:42 GMT 2012
Communications reconfiguration: instance_number 2
Sat Jun 02 14:12:42 GMT 2012
Trace dumping is performing id=[cdmp_20120602141242]
Sat Jun 02 14:13:33 GMT 2012
Shutting down instance (abort)
License high water mark = 1417
Termination issued to instance processes. Waiting for the processes to exit
Sat Jun 02 14:13:43 GMT 2012
Instance termination failed to kill one or more processes
Sat Jun 02 14:14:13 GMT 2012
Instance terminated by USER, pid = 5214

我们发现节点1是在14：13分，被RAC以shutdown abort的方式关闭的。

至此，关闭RAC的命令以以下报错结束：

oracle@vus029pa:SIAP1:/opt/app/oracle/admin $ srvctl stop database -d SIAP
PRKP-1002 : Error stopping instance SIAP1 on node vus029pa
CRS-0216: Could not stop resource 'ora.SIAP.SIAP1.inst'.
oracle@vus029pa:SIAP1:/opt/app/oracle/admin $

虽然oracle提示了节点1无法关闭，但是检查了oracle的进程都已经消失了。确认节点1已经关闭，因此开始重新启动数据库。没想到启动的时候，起不来了：

oracle@vus029pa:SIAP1:/ora/db001/data001/SIAP $ srvctl start database -d SIAP
PRKP-1001 : Error starting instance SIAP1 on node vus029pa
CRS-1028: Dependency analysis failed because of:
CRS-0223: Resource 'ora.SIAP.SIAP1.inst' has placement error.
PRKP-1001 : Error starting instance SIAP2 on node vus160po
CRS-0215: Could not start resource 'ora.SIAP.SIAP2.inst'.
oracle@vus029pa:SIAP1:/ora/db001/data001/SIAP $

发现此时节点是是启动到nomount状态，即有进程存在但是无法启动，节点2是没启动。
对应的alertlog为：
节点1：

Starting ORACLE instance (normal)
Sat Jun 02 14:40:57 GMT 2012
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.5.0.
System parameters with non-default values:
  processes                = 1500
  timed_statistics         = TRUE
  __shared_pool_size       = 6442450944
  shared_pool_size         = 6442450944
  __large_pool_size        = 218103808
  large_pool_size          = 218103808
  __java_pool_size         = 33554432
  java_pool_size           = 33554432
  __streams_pool_size      = 0
  spfile                   = /ora/db001/data001/SIAP/spfileSIAP.ora
  filesystemio_options     = SETALL
  disk_asynch_io           = TRUE
  cluster_interconnects    = 192.168.0.1
  sga_target               = 21474836480
  control_files            = /ora/db001/data001/SIAP/control01SIAP.ctl, /ora/db001/redo002/SIAP/control02SIAP.ctl, /ora/db001/redo001/SIAP/control03SIAP.ctl
  control_file_record_keep_time= 30
  db_block_size            = 8192
  __db_cache_size          = 14763950080
  db_cache_size            = 10737418240
  db_writer_processes      = 10
  compatible               = 10.2.0
  log_archive_config       = DG_CONFIG=(SIAP,SIAP_DG)
  log_archive_dest_1       = location=/ora/db001/dbfra001/SIAP valid_for=(all_logfiles,all_roles) db_unique_name=SIAP
  log_archive_dest_2       = service=SIAP_DG valid_for=(online_logfiles,primary_role) LGWR ASYNC DB_UNIQUE_NAME=SIAP_DG
  log_archive_dest_state_1 = ENABLE
  log_archive_dest_state_2 = ENABLE
  log_archive_max_processes= 10
  standby_archive_dest     = /ora/db001/dbfra001/SIAP/standby
  log_archive_format       = arch_SIAP_%s_%t_%r.arc
  fal_client               = SIAP
  fal_server               = SIAP_DG
  log_buffer               = 14234112
  db_files                 = 1000
  db_file_multiblock_read_count= 16
  cluster_database         = TRUE
  cluster_database_instances= 2
  db_recovery_file_dest    = /ora/db001/dbfra001/SIAP
  db_recovery_file_dest_size= 64424509440
  standby_file_management  = AUTO
  thread                   = 1
  fast_start_mttr_target   = 300
  log_checkpoints_to_alert = TRUE
  instance_number          = 1
  undo_management          = AUTO
  undo_tablespace          = undots
  undo_retention           = 3600
  create_stored_outlines   = FALSE
  remote_login_passwordfile= EXCLUSIVE
  db_domain                = in.telstra.world
  instance_name            = SIAP1
  local_listener           = LISTENER_VUS029PA
  remote_listener          = LISTENER_SIAP
  session_cached_cursors   = 100
  utl_file_dir             = /tmp
  job_queue_processes      = 2
  cursor_sharing           = force
  background_dump_dest     = /opt/app/oracle/admin/SIAP/bdump
  user_dump_dest           = /opt/app/oracle/admin/SIAP/udump
  max_dump_file_size       = 5M
  core_dump_dest           = /opt/app/oracle/admin/SIAP/cdump
  audit_file_dest          = /opt/app/oracle/admin/SIAP/adump
  session_max_open_files   = 200
  open_links               = 4
  audit_trail              = DB
  db_name                  = SIAP
  open_cursors             = 1000
  star_transformation_enabled= true
  query_rewrite_enabled    = true
  query_rewrite_integrity  = trusted
  pga_aggregate_target     = 17179869184
  workarea_size_policy     = auto
Cluster communication is configured to use the following interface(s) for this instance
  192.168.0.1
Sat Jun 02 14:41:01 GMT 2012
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=10522
DIAG started with pid=3, OS id=10524
PSP0 started with pid=4, OS id=10526
LMON started with pid=5, OS id=10528
LMD0 started with pid=6, OS id=10530
LMS0 started with pid=7, OS id=10539
LMS1 started with pid=8, OS id=10544
LMS2 started with pid=9, OS id=10548
LMS3 started with pid=10, OS id=10552
LMS4 started with pid=11, OS id=10556
LMS5 started with pid=12, OS id=10560
LMS6 started with pid=13, OS id=10564
LMS7 started with pid=14, OS id=10576
LMS8 started with pid=15, OS id=10580
LMS9 started with pid=16, OS id=10584
LMSa started with pid=17, OS id=10594
LMSb started with pid=18, OS id=10598
LMSc started with pid=19, OS id=10602
LMSd started with pid=20, OS id=10606
MMAN started with pid=21, OS id=10623
DBW0 started with pid=22, OS id=10653
DBW1 started with pid=23, OS id=10673
DBW2 started with pid=24, OS id=10686
DBW3 started with pid=25, OS id=10690
DBW4 started with pid=26, OS id=10692
DBW5 started with pid=27, OS id=10694
DBW6 started with pid=28, OS id=10696
DBW7 started with pid=29, OS id=10706
DBW8 started with pid=30, OS id=10708
DBW9 started with pid=31, OS id=10710
LGWR started with pid=32, OS id=10712
CKPT started with pid=33, OS id=10714
SMON started with pid=34, OS id=10716
RECO started with pid=35, OS id=10718
CJQ0 started with pid=36, OS id=10720
MMON started with pid=37, OS id=10723
MMNL started with pid=38, OS id=10732
< <<挂死在此处

节点2的alertlog为：

Sat Jun 02 14:22:15 GMT 2012
Starting ORACLE instance (normal)
Sat Jun 02 14:23:25 GMT 2012
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.5.0.
System parameters with non-default values:
  processes                = 1500
  timed_statistics         = TRUE
  __shared_pool_size       = 6442450944
  shared_pool_size         = 6442450944
  __large_pool_size        = 218103808
  large_pool_size          = 218103808
  __java_pool_size         = 33554432
  java_pool_size           = 33554432
  __streams_pool_size      = 0
  spfile                   = /ora/db001/data001/SIAP/spfileSIAP.ora
  filesystemio_options     = SETALL
  disk_asynch_io           = TRUE
  cluster_interconnects    = 192.168.0.2
  sga_target               = 21474836480
  control_files            = /ora/db001/data001/SIAP/control01SIAP.ctl, /ora/db001/redo002/SIAP/control02SIAP.ctl, /ora/db001/redo001/SIAP/control03SIAP.ctl
  control_file_record_keep_time= 30
  db_block_size            = 8192
  __db_cache_size          = 14763950080
  db_cache_size            = 10737418240
  db_writer_processes      = 10
  compatible               = 10.2.0
  log_archive_config       = DG_CONFIG=(SIAP,SIAP_DG)
  log_archive_dest_1       = location=/ora/db001/dbfra001/SIAP valid_for=(all_logfiles,all_roles) db_unique_name=SIAP
  log_archive_dest_2       = service=SIAP_DG valid_for=(online_logfiles,primary_role) LGWR ASYNC DB_UNIQUE_NAME=SIAP_DG
  log_archive_dest_state_1 = ENABLE
  log_archive_dest_state_2 = ENABLE
  log_archive_max_processes= 10
  standby_archive_dest     = /ora/db001/dbfra001/SIAP/standby
  log_archive_format       = arch_SIAP_%s_%t_%r.arc
  fal_client               = SIAP
  fal_server               = SIAP_DG
  log_buffer               = 14234112
  db_files                 = 1000
  db_file_multiblock_read_count= 16
  cluster_database         = TRUE
  cluster_database_instances= 2
  db_recovery_file_dest    = /ora/db001/dbfra001/SIAP
  db_recovery_file_dest_size= 64424509440
  standby_file_management  = AUTO
  thread                   = 2
  fast_start_mttr_target   = 300
  log_checkpoints_to_alert = TRUE
  instance_number          = 2
  undo_management          = AUTO
  undo_tablespace          = undots2
  undo_retention           = 3600
  create_stored_outlines   = FALSE
  remote_login_passwordfile= EXCLUSIVE
  db_domain                = in.telstra.world
  instance_name            = SIAP2
  local_listener           = LISTENER_VUS160PO
  remote_listener          = LISTENER_SIAP
  session_cached_cursors   = 100
  utl_file_dir             = /tmp
  job_queue_processes      = 2
  cursor_sharing           = force
  background_dump_dest     = /opt/app/oracle/admin/SIAP/bdump
  user_dump_dest           = /opt/app/oracle/admin/SIAP/udump
  max_dump_file_size       = 5M
  core_dump_dest           = /opt/app/oracle/admin/SIAP/cdump
  audit_file_dest          = /opt/app/oracle/admin/SIAP/adump
  session_max_open_files   = 200
  open_links               = 4
  audit_trail              = DB
  db_name                  = SIAP
  open_cursors             = 1000
  star_transformation_enabled= true
  query_rewrite_enabled    = true
  query_rewrite_integrity  = trusted
  pga_aggregate_target     = 17179869184
  workarea_size_policy     = auto
Cluster communication is configured to use the following interface(s) for this instance
  192.168.0.2
Sat Jun 02 14:23:28 GMT 2012
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=24777
DIAG started with pid=3, OS id=24779
PSP0 started with pid=4, OS id=24781
LMON started with pid=5, OS id=24783
LMD0 started with pid=6, OS id=24785
LMS0 started with pid=7, OS id=24787
LMS1 started with pid=8, OS id=24794
LMS2 started with pid=9, OS id=24803
LMS3 started with pid=10, OS id=24807
LMS4 started with pid=11, OS id=24811
LMS5 started with pid=12, OS id=24816
LMS6 started with pid=13, OS id=24841
LMS7 started with pid=14, OS id=24852
LMS8 started with pid=15, OS id=24857
LMS9 started with pid=16, OS id=24861
LMSa started with pid=17, OS id=24865
LMSb started with pid=18, OS id=24901
LMSc started with pid=19, OS id=24907
LMSd started with pid=20, OS id=24920
MMAN started with pid=21, OS id=24924
DBW0 started with pid=22, OS id=24926
DBW1 started with pid=23, OS id=24928
DBW2 started with pid=24, OS id=24930
DBW3 started with pid=25, OS id=24932
DBW4 started with pid=26, OS id=24934
DBW5 started with pid=27, OS id=24938
DBW6 started with pid=28, OS id=24946
DBW7 started with pid=29, OS id=24948
DBW8 started with pid=30, OS id=24950
DBW9 started with pid=31, OS id=24952
LGWR started with pid=32, OS id=24954
CKPT started with pid=33, OS id=24956
SMON started with pid=34, OS id=24958
RECO started with pid=35, OS id=24968
CJQ0 started with pid=36, OS id=24970
MMON started with pid=37, OS id=24972
MMNL started with pid=38, OS id=24976
Sat Jun 02 14:23:46 GMT 2012
USER: terminating instance due to error 304
Instance terminated by USER, pid = 23354

我们看到节点2其实也尝试启动过，但是遭遇了error 304，所以被自动关闭了。

手工shutdown abort节点1之后，尝试再次重启，还是同样的问题，节点1能启动进程，但是挂死，节点2启动之后被关闭。
不过报错信息稍有不同，只有节点2无法启动的错误了。

oracle@vus029pa:SIAP1:/ora/db001/data001/SIAP $ srvctl start database -d SIAP
PRKP-1001 : Error starting instance SIAP2 on node vus160po
CRS-0215: Could not start resource 'ora.SIAP.SIAP2.inst'.
oracle@vus029pa:SIAP1:/ora/db001/data001/SIAP $

多次尝试都是该错误，因此，RAC起不来的原因，应该是节点2无法启动，而节点2无法启动，应该是遭遇304的错误。

我们来查一下error 304是什么：

oracle@vus160po:SIAP2:/opt/app/oracle/product/10.2.0/db_1/dbs $   oerr ora 304
00304, 00000, "requested INSTANCE_NUMBER is busy"
// *Cause:  An instance tried to start by using a value of the
//          initialization parameter INSTANCE_NUMBER that is already in use.
// *Action: Either
//       a) specify another INSTANCE_NUMBER,
//       b) shut down the running instance with this number
//       c) wait for instance recovery to complete on the instance with
//          this number.

根据alertlog，发现节点2的instance_number是2：

……
fast_start_mttr_target   = 300
log_checkpoints_to_alert = TRUE
instance_number          = 2
……

尝试修改pfile中的instance_number，改为：

SIAP1.instance_number=3
SIAP2.instance_number=4

尝试再次重启，还是报错：

oracle@vus029pa:SIAP1:/opt/app/oracle/product/10.2.0/db_1/dbs $ srvctl start service -d SIAP -s SIAP2
PRKP-1030 : Failed to start the service SIAP2.
CRS-0215: Could not start resource 'ora.SIAP.SIAP2.cs'.

此时在节点1的alertlog情况和原来相同，也是到MMNL started with pid=xxx这一步就挂住了，但是在节点2的alertlog完全没有新的内容写出来，也就是节点2根本没尝试启动。

由于改instance_number没效果，只好把instance_number再改回去。

尝试手工启动节点2：

SQL> startup nomount
ORA-00304: requested INSTANCE_NUMBER is busy
SQL>

此时，同事也在一起看这个问题，他发现了故障原因所在：虽然数据库已经被shutdown了，但是在操作系统中，还仍然存在不少LOCAL=NO的进程。

ps -ef |grep SIAP2
oracle  5074     1   0 17:49:36 ?           0:02 oracleSIAP2 (LOCAL=NO)
oracle 18782     1   0 18:00:05 ?           1:01 oracleSIAP2 (LOCAL=NO)
oracle  4649     1   0 17:49:19 ?           0:46 oracleSIAP2 (LOCAL=NO)
oracle 21736     1   0 18:02:31 ?           0:29 oracleSIAP2 (LOCAL=NO)
oracle  3693     1   0   Mar 23 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26392     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 12509  8593   0 17:31:03 pts/4       0:00 tail -f /opt/app/oracle/admin/SIAP/bdump/alert_SIAP2.log
oracle 26382     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 29425     1   0   Apr 14 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26372     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 23702     1   0   May 19 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26368     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26377     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle  7945     1   0   Apr 28 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26396     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26379     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 14564     1   0   May 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26367     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26373     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 23715     1   0   May 19 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle  6311     1   0   Apr 18 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 29428     1   0   Apr 14 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 27062     1   0   Apr 02 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle  1283     1   0   May 12 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26380     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26374     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26369     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26395     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26370     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 20775     1   0   May 28 ?           0:00 oracleSIAP2 (LOCAL=NO)
oracle 26371     1   0   Jan 25 ?           0:00 oracleSIAP2 (LOCAL=NO)

通过ps -ef看到，确实存在很多没有down下去的LOCAL=N的进程。也因为是这个原因，让oracle认为节点2还是在活动的，因此不能重新启动该实例。

而该系统的架构是2台服务器上跑2个RAC，我们目前只down下去了1个RAC，另外一个RAC还在跑，服务器上还有不少LOCAL=NO的进程，因此当时我也没太注意竟然还有down掉的那个RAC的LOCAL=NO的进程。

ok，问题已经找到，用

kill -9 `ps -ef|grep LOCAL=NO |grep SIAP2|grep -v grep|awk '{print $2}'`

杀掉进程之后，再次重启数据库，成功。

唉，关于杀LOCAL=NO的进程的问题，其实我在很早的时候就写过一篇文章讲停数据库的技巧，没想到在RAC环境中，还是一样适用，没杀掉LOCAL=N进程，竟然会引起数据库无法启动的问题。

原文地址：http://www.oracleblog.org/working-case/startup-rac-fail-due-to-error-304/