30分钟教你玩转Linux磁盘管理
我们看看在Linux系统中磁盘是如何分区的
磁盘分区：
fdisk:是Linux的一个操作磁盘分区表的常用工具：
常用的格式：fdisk -l列出使用的磁盘设备
[root@linux ~]# fdisk -l Disk /dev/sda: 214.7 GB, 214748364800 bytes, 419430400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk label type: dos Disk identifier: 0x00029f42 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1026047 512000 83 Linux /dev/sda2 1026048 84912127 41943040 83 Linux /dev/sda3 84912128 126855167 20971520 83 Linux /dev/sda4 126855168 419430399 146287616 5 Extended /dev/sda5 126859264 131055615 2098176 82 Linux swap / Solaris
下面我们根据实验一点点讲解Linux磁盘的管理操作
0.创建主分区(MBR)：
a) Fdisk /dev/sda进入磁盘分区环境
[root@bogon ~]# fdisk /dev/sda WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help):
当然，执行在这的时候，你可以使用m便会列出命令选项：
Command (m for help): m Command action a toggle a bootable flag b edit bsd disklabel c toggle the dos compatibility flag d delete a partition l list known partition types m print this menu n add a new partition o create a new empty DOS partition table p print the partition table q quit without saving changes s create a new empty Sun disklabel t change a partition's system id u change display/entry units v verify the partition table w write table to disk and exit x extra functionality (experts only) Command (m for help):
b) n 添加一个新的磁盘
Command (m for help): n Command action e extended p primary partition (1-4)
e：表示扩展分区，p：表示主分区(1-4)
[延伸]我们之后主分区的数量是由分区表限制的，64的分区表最多只能分为4个主分区，或者三个主分区一个扩展分区或者其他，常见的window中的就是一个主分区一个扩展分区(明白了吗)
Command action e extended p primary partition (1-4) p Partition number (1-4): 3 First cylinder (7859-15665, default 7859):
c) 回车选择默认的起始扇区
Partition number (1-4): 3 First cylinder (7859-15665, default 7859): Using default value 7859
这里我们直接回车表示使用的是起始的柱面(在系统版本的不同，有的是根据柱面，有的是扇区，不过呢，也没啥大碍)
d) 输入格式为”+[M,G]”磁盘空间大小
Last cylinder, +cylinders or +size{K,M,G} (7859-15665, default 15665): +10G
根据我们自己个人定制，使用括号里面的单位，或者你也可以选择使用柱面表示，但是前面有一个加号
e) w保存退出
Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks.
这一切的操作其实都是在内存中完成，只有使用w才是保存下来，下面我们来验证一下
f) ls /dev/sda*或者cat /proc/partitions查看是否有新创建的分区
[root@bogon ~]# ls /dev/sda* /dev/sda /dev/sda1 /dev/sda2 [root@bogon ~]# cat /proc/partitions major minor #blocks name 8 0 125829120 sda 8 1 204800 sda1 8 2 62914560 sda2 253 0 20971520 dm-0 253 1 2097152 dm-1 253 2 10485760 dm-2 253 3 20971520 dm-3 [root@bogon ~]#
奇怪，这是怎么回事呢？难道没有成功？不是的，这是因为没有同步到内核罢了
g) 执行parted �a/dev/sda一次或多次直到显示创建的新的分区
[root@bogon ~]# partx -a /dev/sda BLKPG: Device or resource busy error adding partition 1 BLKPG: Device or resource busy error adding partition 2 [root@bogon ~]# partx -a /dev/sda BLKPG: Device or resource busy error adding partition 1 BLKPG: Device or resource busy error adding partition 2 BLKPG: Device or resource busy error adding partition 3 [root@bogon ~]# fdisk -l Disk /dev/sda: 128.8 GB, 128849018880 bytes 255 heads, 63 sectors/track, 15665 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a6ba Device Boot Start End Blocks Id System /dev/sda1 * 1 26 204800 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 26 7859 62914560 8e Linux LVM /dev/sda3 7859 9164 10489446 83 Linux
partx -a 其实就是通知(告诉)内核，磁盘信息变动了，你更新一下，一次没有显示，我们可以多执行一下看看结果，是不是10G的主分区就创建成功了。因此，这里特别留意两个命令partx 和fdisk
主分区我们创建了，可是我想创建一个交换分区，怎么创建呢？下面我们就来看看
大家知道swap分区就是内存空间，空间前后那就是不一样的了，我们先来查看一下内存空间
[root@bogon ~]# free -m total used free shared buffers cached Mem: 845 157 687 0 12 55 -/+ buffers/cache: 90 754 Swap: 2047 0 2047
现在开始创建一个swap分区
[root@bogon ~]# mkswap /dev/sda4 mkswap: /dev/sda4: warning: don't erase bootbits sectors (dos partition table detected). Use -f to force. Setting up swapspace version 1, size = 31463296 KiB no label, UUID=c0c990f9-9d68-41d6-8e75-1eb41b08c4fc [root@bogon ~]# mkswap -f /dev/sda4 Setting up swapspace version 1, size = 31463296 KiB no label, UUID=5017d30a-1d96-4e47-b4ba-274d132afeb9 [root@bogon ~]# free -m total used free shared buffers cached Mem: 845 157 687 0 12 55 -/+ buffers/cache: 90 754 Swap: 2047 0 2047 [root@bogon ~]# swapon /dev/sda4 [root@bogon ~]# free -m total used free shared buffers cached Mem: 845 180 664 0 12 55 -/+ buffers/cache: 112 732 Swap: 32773 0 32773 [root@bogon ~]#
当然我们也是可以把一个已经创建的分区调整为swap分区
a) Fdisk /dev/sda进入磁盘分区环境
b) n 添加一个新的磁盘
c) 回车选择默认的起始扇区
d) 输入格式为”+[MG]”磁盘空间大小
e) l 显示调整分区的系统ID，swap(82)
f) t 调整分区
g) 输入调整的分区号
h) 输入要想调整的分区类型ID(82)
i) p 查看分区调整的结果
j) w 保存
k) kpartx -af /dev/sda重读一次或者两次，或者手动调整，使用kpartx �a /dev/sda#,#是调整的那个分区号，手动的添加一个分区
l) fdisk �l /dev/sda 查看显示是否成功
下面是源码展示：步骤很清楚
[root@bogon ~]# fdisk /dev/sda
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
First cylinder (9165-13081, default 9165):
Using default value 9165
Last cylinder, +cylinders or +size{K,M,G} (9165-13081, default 13081): +100M
Command (m for help): l
0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris
1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT-
2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT-
3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT-
4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx
5 Extended 42 SFS 86 NTFS volume set da Non-FS data
6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / .
7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility
8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt
9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access
a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O
b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/
10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b
11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor
12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor
14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary
16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS
17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE
18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT
1e Hidden W95 FAT1
Command (m for help): t
Partition number (1-5): 5
Hex code (type L to list codes): 82
Changed system type of partition 5 to 82 (Linux swap / Solaris)
Command (m for help): p
Disk /dev/sda: 128.8 GB, 128849018880 bytes
255 heads, 63 sectors/track, 15665 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0004a6ba
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 204800 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2 26 7859 62914560 8e Linux LVM
/dev/sda3 7859 9164 10489446 83 Linux
/dev/sda4 9165 13081 31463302+ 5 Extended
/dev/sda5 9165 9178 112423+ 82 Linux swap / Solaris
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@bogon ~]# kpartx -a /dev/sda
device-mapper: reload ioctl on sda1 failed: Invalid argument
create/reload failed on sda1
device-mapper: reload ioctl on sda2 failed: Invalid argument
create/reload failed on sda2
device-mapper: reload ioctl on sda3 failed: Invalid argument
create/reload failed on sda3
device-mapper: reload ioctl on sda4 failed: Invalid argument
create/reload failed on sda4
device-mapper: reload ioctl on sda5 failed: Invalid argument
create/reload failed on sda5
2.文件系统的创建
这里使用的是mkfs格式化工具，他可以把分区格式化为mkfs.cramfs mkfs.ext2 mkfs.ext3 mkfs.ext4 mkfs.ext4dev mkfs.msdos mkfs.vfat这些文件系统例如：
[root@bogon ~]# mkfs.ext4 /dev/sda3 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 655776 inodes, 2622361 blocks 131118 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2688548864 81 block groups 32768 blocks per group, 32768 fragments per group 8096 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 37 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
a) mkfs.ext2 /dev/sda# 格式化sda#分区成为ext2的文件系统类型(破坏已有的文件系统类型)
[root@bogon ~]# mkfs.ext2 /dev/sda3 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 655776 inodes, 2622361 blocks 131118 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2688548864 81 block groups 32768 blocks per group, 32768 fragments per group 8096 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 24 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override.
b) blkid /dev/sda# 查看分区是否格式化成目标文件系统类型
[root@bogon ~]# blkid /dev/sda3 /dev/sda3: UUID="228c109c-b9f8-4339-90eb-b072c60b3433" TYPE="ext2"
3.创建一个xfs文件系统
a) Lsmod | grep xfs 查看系统是否加载的有xfs,或者Mkfs. TABTAB查看是否有xfs文件格式包没有就执行下一步或者跳下一步
[root@linux ~]# lsmod | grep xfs xfs 939662 3 libcrc32c 12644 1 xfs [root@linux ~]# mkfs. mkfs.btrfs mkfs.cramfs mkfs.ext2 mkfs.ext3 mkfs.ext4 mkfs.fat mkfs.minix mkfs.msdos mkfs.vfat mkfs.xfs [root@linux ~]# mkfs.
b) Yum install xfs-progs安装xfs包(省略)
c) Mkfs.xfs �f /dev/sda# 强制把原来的格式转化为xfs格式的文件系统
[root@linux ~]# mkfs.xfs -f /dev/sda7 meta-data=/dev/sda7 isize=256 agcount=4, agsize=6400 blks = sectsz=512 attr=2, projid32bit=1 = crc=0 finobt=0 data = bsize=4096 blocks=25600, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=0 log =internal log bsize=4096 blocks=853, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 [root@linux ~]#
d) Blkid /dev/sda#
[root@linux ~]# blkid /dev/sda7 /dev/sda7: UUID="6655205a-6c44-49a3-a9cc-e2587458c1c1" TYPE="xfs" [root@linux ~]#
4.了解一些专业的ext文件系统创建工具
a) Mke2fs 选项 device
l -t {ext2|ext3|ext4}指明要创建的文件系统的类型
[root@bogon ~]# blkid /dev/sda3 /dev/sda3: UUID="228c109c-b9f8-4339-90eb-b072c60b3433" TYPE="ext2" [root@bogon ~]# mke2fs -t ext3 /dev/sda3 ...... [root@bogon ~]# blkid /dev/sda3 /dev/sda3: UUID="347239a7-720e-429a-b381-9e92d7e47f49" SEC_TYPE="ext2" TYPE="ext3"
Mkfs.ext4=mkfs �text4=mke2fs �t ext4
l -b ｛1024|2048|4096｝指明块的大小
l -L 指明或修改卷标lable
l -m 指定预留空间百分比
[root@bogon ~]# mke2fs -t ext4 -b 2048 -L juanbiao1 -m 3 /dev/sda3 mke2fs 1.41.12 (17-May-2010) Filesystem label=juanbiao1 OS type: Linux Block size=2048 (log=1) Fragment size=2048 (log=1) Stride=0 blocks, Stripe width=0 blocks 657408 inodes, 5244722 blocks 157341 blocks (3.00%) reserved for the super user First data block=0 Maximum filesystem blocks=543162368 321 block groups 16384 blocks per group, 16384 fragments per group 2048 inodes per group Superblock backups stored on blocks: 16384, 49152, 81920, 114688, 147456, 409600, 442368, 802816, 1327104, 2048000, 3981312 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@bogon ~]#
l -j 创建有日志功能的文件系统ext3
Mkfs.ext3=mkfs �text3=mke2fs �j=mke2fs �O has_journal /dev/sda3
[root@bogon ~]# mke2fs -j /dev/sda3 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 655776 inodes, 2622361 blocks 131118 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2688548864 81 block groups 32768 blocks per group, 32768 fragments per group 8096 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 35 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@bogon ~]# blkid /dev/sda3 /dev/sda3: UUID="33eb2e59-f7fc-4bc8-bb8a-824460614f2d" SEC_TYPE="ext2" TYPE="ext3"
例子：mke2fs �t ext4 �b 2048 �L juanbiao/dev/sda#
5.专业ext文件系统更改卷标
a) E2lable查看或者设定文件系统的卷标
e2lable /dev/sda# 或者blkid /dev/sda#查看卷标
e2lable /dev/sda# juanbiao 设定文件系统卷标
[root@bogon ~]# e2label /dev/sda3 juanbiao2 [root@bogon ~]# e2label /dev/sda3 juanbiao2 [root@bogon ~]#
6.查看或修改ext系列文件系统的某些[超级块]属性[块大小创建后不能修改]
a) Tune2fs �l /dev/sda# 查看文件系统中超级块的信息
[root@bogon ~]# tune2fs -l /dev/sda3 tune2fs 1.41.12 (17-May-2010) Filesystem volume name: juanbiao2 Last mounted on: <not available> Filesystem UUID: 33eb2e59-f7fc-4bc8-bb8a-824460614f2d Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype sparse_super large_file Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 655776 Block count: 2622361 Reserved block count: 131118 Free blocks: 2542628 Free inodes: 655765 First block: 0 ......
b) �j 无损将ext2升级为ext3
1. tune2fs �j /dev/sda# 文件系统改为ext3
[root@bogon ~]# mke2fs -t ext2 /dev/sda3 mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 655776 inodes, 2622361 blocks 131118 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=2688548864 81 block groups 32768 blocks per group, 32768 fragments per group 8096 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 Writing inode tables: done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 32 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@bogon ~]# tune2fs -j /dev/sda3 tune2fs 1.41.12 (17-May-2010) Creating journal inode: done This filesystem will be automatically checked every 32 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@bogon ~]# blkid /dev/sda3 /dev/sda3: UUID="c58a8365-b94b-4da4-b6c3-7e95e543b18b" SEC_TYPE="ext2" TYPE="ext3"
2. -L 指明或修改卷标lable
3. -m 指定预留空间百分比
[root@bogon ~]# tune2fs -L nihao -m 3 /dev/sda3 tune2fs 1.41.12 (17-May-2010) Setting reserved blocks percentage to 3% (78670 blocks) [root@bogon ~]# e2label /dev/sda3 nihao [root@bogon ~]#
4. -O 关闭或启动某种特性
a) Tune2fs �O ^has_journal/dev/sda3关闭该文件系统的日志功能
b) Tune2fs �o ^mount_options/dev/sda3关闭该文件系统的默认挂载选项
c) Tune2fs �o acl /dev/sda3访问控制列表
[root@bogon ~]# tune2fs -o acl /dev/sda3 tune2fs 1.41.12 (17-May-2010) [root@bogon ~]# blkid /dev/sda3 /dev/sda3: UUID="c58a8365-b94b-4da4-b6c3-7e95e543b18b" SEC_TYPE="ext2" TYPE="ext3" LABEL="nihao" [root@bogon ~]# tune2fs -l /dev/sda3 tune2fs 1.41.12 (17-May-2010) Filesystem volume name: nihao Last mounted on: <not available> Filesystem UUID: c58a8365-b94b-4da4-b6c3-7e95e543b18b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype sparse_super large_file Filesystem flags: signed_directory_hash Default mount options: acl-------------<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<------------- Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux
7.显示文件系统属性信息
a) Dumpe2fs /dev/sda# 显示文件系统的详细信息以及每一个块组的详细信息
由于版面太长不予显示了
b) Dumpe2fs �h /dev/sda#与Tune2fs �l /dev/sda#的结果相似
[root@bogon ~]# dumpe2fs -h /dev/sda3 dumpe2fs 1.41.12 (17-May-2010) Filesystem volume name: nihao Last mounted on: <not available> Filesystem UUID: c58a8365-b94b-4da4-b6c3-7e95e543b18b Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype sparse_super large_file Filesystem flags: signed_directory_hash Default mount options: acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 655776 Block count: 2622361 Reserved block count: 78670
8.文件系统检测
a) 因进程意外终止或系统崩溃等原因导致写入操作非正常终止时，可能会在造成文件损坏，此时应该检测并修复文件系统，但是建议文件系统离线[不要挂载或者别人正在使用写入的时候]操作
Ext系列文件系统检测专用e2fsck
-y 对所有的交互式询问自动回答yes
-f 即使文件系统处于clean状态，也要强制进行检测
[root@bogon ~]# e2fsck -yf /dev/sda3 e2fsck 1.41.12 (17-May-2010) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information nihao: 11/655776 files (0.0% non-contiguous), 79733/2622361 blocks [root@bogon ~]#
通用fsck工具(检测和修复文件系统)
-f fstype 指明文件系统的类型fsck �t ext4=fsck.ext4
-a 不用交互自动修复所有错误(不建议使用)
-r 交互式修复
[root@bogon ~]# fsck -fr /dev/sda3 fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information nihao: 11/655776 files (0.0% non-contiguous), 79733/2622361 blocks [root@bogon ~]#
10定位设备
Blkid device
Blkid �L lable 根据卷标定位设备
Blkid �U UUID 根据UUID定位设备
[root@bogon ~]# blkid -L nihao /dev/sda3 [root@bogon ~]# blkid /dev/sda3 /dev/sda3: UUID="c58a8365-b94b-4da4-b6c3-7e95e543b18b" SEC_TYPE="ext2" TYPE="ext3" LABEL="nihao" [root@bogon ~]# blkid -U c58a8365-b94b-4da4-b6c3-7e95e543b18b /dev/sda3 [root@bogon ~]#
11、创建一个GPT分区
简单了解一下什么是GPT分区？
GPT全局唯一标识分区表(GUID Partition Table)，与传统的MBR分区表相比，存在着很大的差异性，比如：
分区数量：
MBR熟知的最多只能分为4个主分区，对于GPT来说，对分区是没有限制的，只是再window上支持128个分区罢了，但是在管理硬盘大小上来说，还是处于可管理18EB的优先地位，而NTFS只是256TB的大小空间。
下面我们体验一下Linux下GPT分区：
一个GPT分区的范例：
[root@bogon ~]# parted /dev/sda3 GNU Parted 2.1 Using /dev/sda3 Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mklabel New disk label type? gpt Warning: The existing disk label on /dev/sda3 will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? Yes Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda3 (Invalid argument). As a result, it may not reflect all of your changes until after reboot. (parted) p Model: Unknown (unknown) Disk /dev/sda3: 10.7GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags (parted) mkpart Partition name? []? mydisk1 File system type? [ext2]? Start? 100M End? 200M Warning: WARNING: the kernel failed to re-read the partition table on /dev/sda3 (Invalid argument). As a result, it may not reflect all of your changes until after reboot. (parted) P Model: Unknown (unknown) Disk /dev/sda3: 10.7GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 99.6MB 200MB 101MB mydisk1 (parted) quit
以上仅供参考，谢谢指点