中软融鑫面试题+笔试题
中软融鑫 笔试题（不断更新）
[摘要]
中软融鑫即北京
中软融鑫计算机系统工程有限公司。中软集团融鑫公司是中软集团旗下专门从事金融、政府领域软件开发、系统集成、产品代理、技术服务的专业化公司，在行业应用系统开发与服务、自主产品创新研发等方面具有雄厚实力和成熟经验。
网址： http://www.resoft.css.com.cn/
笔试题如下：
1．关于工作
（1） 你对未来的工作生活是怎样憧憬的？为何选择我公司作为求职公司？
（2）请用不超过30个字给出一个最能让我们录用你的理由。
（3）你认为比较理想的工作环境是怎样的？
（4）你个人的中长期的职业发展目标是怎样的？
2．关于社会
（1）如果你是杨利伟，你在太空中向祖国人民说的第一句话是什么？
（2）宋美龄女士于2003年10月谢世，对这位著名人士在西安事变中的态度和作用，你 是如何看待的？（不超过300字）
（3）北京***颁布的对拾金不昧者，失主要奖励相当于财产20%奖金的公告，你是如何看的？
（4）如果给你50万元人民币，你将会用这些钱做什么？
（5）在美国，男、女卫生间（厕所）的正确称呼为什么？请用英语写出答案。
（6）你认为麦当劳是世界最大的汉堡生产商吗？如果不是，请说出你的观点。
3．教育背景
（1）你受过哪些正规的教育或培训？（自高中毕业起）
（2）在校期间进行过哪些社会活动？
Delphi笔试题目
机械类笔试试题
1. Briefly describe what is blanking(cutting), forming, coining and embosing in stamping process.
2. What is metal clading?
3. What is the purpose of adding glass fiber to thermoplastic material?
4. In contrast with metal and thermoplastic material, which has a higher coefficient of thermal expansion(CTE).
5. The most suitable material for a integral hinge design (typical plastic thickness=0.25 to 0.5mm at hinge)
6. Can a bending load makes both compressive and tensile stress in a member?
7. What is the design criteria used in plastics catch/snap?
8. What is FEA?
9. Why is natural frequency important in vibration analysis?
10. What is the deflection equation of a cantilever beam fixed at one edge ?
EE笔试试题
1. Name 3 Vehicle Buses.
2. Name 2 possible sources of Electromagnetic interference on Electronics Circuit ASM.
3. Wavelength for 12MHz frequency signal is____
4. Name 2 important considerations for car radio performance related to audio signal processing under multipath condition?
5. What is the typical FM receiver RF signal strength to achieve 30dB S/N for car radio?
6. When a radio is tuned to 98.1 MHz & with a LO of 108.8 MHz, what is the image frequency?
7. For a system with a matched impedance, what is the Reflection Coefficient and SWR?
8. Which property of the output capacitor is the primary cause of Low Drop Out(LDO) regulator loop instability?
（1）Equivalent series resistance(ESR)
（2）Effective series inductance(ESL)
（3）Capacitance value
（4）Dielectric material
9. The switching regulator is capable of:
（1）Higher power conversion efficiency
（2）Providing an output voltage that is higher than the input
（3）Generating an output boltage oppsite in polarity to the input
（4）All of the above
10. A linear regulator op Vin(max) = 10v, Vout(min) = 4.8v, Iout(max) = 2. 5mA, Iq(max) = 2.5mA, Ta(max) = 8.5摄氏度，The regulator is available in 3 packages.Each package has the following thermal characteristics:
Package Rja（摄氏度/W） Rjc（摄氏度/W） SO14 125 30 D1P8 100 52
Choose the most suitable package to handle the power dissipation requirement without a heat sink and why.
软件笔试题
1. How do you code an infinite loop in C?
2. Volatile:
（1）What does the keyword volatile mean? Give an example
（2）Can a parameter be both const and volatile? Give an example
（3）Can a pointer be volatile? Give an example
3. What are the values of a, b, and c after the following instructions:
int a=5, b=7, c;
c = a+++b;
4. What do the following declarations mean?
（1）const int a;
（2）int const a;
（3）const int *a;
（4）int * const a;
（5）int const * a const;
5. Which of the following statements describe the use of the keyword static?
（1）Within the body of a function: A static variable maintains its value between function revocations
（2）Within a module: A static variable is accessible by all functions within that module
（3）Within a module: A static function can only be called by other functions within that module
6. Embedded systems always require the user to manipulate bits in registers or variables. Given an integer variable a, write two code fragments. The first should set bit 5 of a. The second shnuld clear bit 5 of a. In both cases, the remaining bits should be unmodified.
7. What does the following function return?
char foo(void)
{
unsigned int a = 6;
iht b = -20;
char c;
(a+b > 6) ? (c=1): (c=0);
return c;
}
8. What will be the output of the following C code?
main()
{
int k, num= 30;
k =(num > 5 ? (num <=10 ? 100:200): 500);
printf(“%d”, k);
}
9. What will the following C code do?
int *ptr;
ptr =(int *)Ox67a9;
*ptr = Oxaa55;
10. What will be the output of the follow C code?
#define product(x) (x*x)
main()
{
int i = 3, j, k;
j = product(i++);
k = product(++i);
printf(“%d %d”,j,k);
}
11. Simplify the following Boolean expression
!((i ==12) || (j > 15))
12. How many flip-flop circuits are needed to divide by 16?
13. Provides 3 properties that make an OS, a RTOS?
14. What is pre-emption?
15. Assume the BC register value is 8538H, and the DE register value is 62 A5H.Find the value of register BC after the following assembly operations:
MOV A,C
SUB E
MOV C,A
MOV A,B
SBB D
MOV B,A
16. In the Assembly code shown below
LOOP: MVI C,78H
DCR C
JNZ LOOP
HLT
How many times is the DCR C Operation executed?
17. Describe the most efficient way (in term of execution time and code size) to divide a number by 4 in assembly language
18. what value is stored in m in the following assembly language code fragment if n=7?
LDAA #n
LABEL1: CMPA #5
BHI L3
BEQ L2
DECA
BRA L1
LABEL2: CLRA
LABEL3: STAA #m
19. What is the state of a process if a resource is not available?
#define a 365*24*60*60
20. Using the #define statement, how would you declare a manifest constant that returns the number of seconds in a year? Disregard leap years in your answer.
21. Interrupts are an important part of embedded systems. Consequently, many compiler vendors offer an extension to standard C to support interrupts. Typically, the keyword is __interrupt. The following routine (ISR). Point out problems in the code.
__interrupt double compute_area (double radius)
{
double area = PI * radius * radius;
printf(“nArea = %f”, area);
return area;
}
网址： http://www.resoft.css.com.cn/
笔试题如下：
1．关于工作
（1） 你对未来的工作生活是怎样憧憬的？为何选择我公司作为求职公司？
（2）请用不超过30个字给出一个最能让我们录用你的理由。
（3）你认为比较理想的工作环境是怎样的？
（4）你个人的中长期的职业发展目标是怎样的？
2．关于社会
（1）如果你是杨利伟，你在太空中向祖国人民说的第一句话是什么？
（2）宋美龄女士于2003年10月谢世，对这位著名人士在西安事变中的态度和作用，你 是如何看待的？（不超过300字）
（3）北京***颁布的对拾金不昧者，失主要奖励相当于财产20%奖金的公告，你是如何看的？
（4）如果给你50万元人民币，你将会用这些钱做什么？
（5）在美国，男、女卫生间（厕所）的正确称呼为什么？请用英语写出答案。
（6）你认为麦当劳是世界最大的汉堡生产商吗？如果不是，请说出你的观点。
3．教育背景
（1）你受过哪些正规的教育或培训？（自高中毕业起）
（2）在校期间进行过哪些社会活动？
Delphi笔试题目
机械类笔试试题
1. Briefly describe what is blanking(cutting), forming, coining and embosing in stamping process.
2. What is metal clading?
3. What is the purpose of adding glass fiber to thermoplastic material?
4. In contrast with metal and thermoplastic material, which has a higher coefficient of thermal expansion(CTE).
5. The most suitable material for a integral hinge design (typical plastic thickness=0.25 to 0.5mm at hinge)
6. Can a bending load makes both compressive and tensile stress in a member?
7. What is the design criteria used in plastics catch/snap?
8. What is FEA?
9. Why is natural frequency important in vibration analysis?
10. What is the deflection equation of a cantilever beam fixed at one edge ?
EE笔试试题
1. Name 3 Vehicle Buses.
2. Name 2 possible sources of Electromagnetic interference on Electronics Circuit ASM.
3. Wavelength for 12MHz frequency signal is____
4. Name 2 important considerations for car radio performance related to audio signal processing under multipath condition?
5. What is the typical FM receiver RF signal strength to achieve 30dB S/N for car radio?
6. When a radio is tuned to 98.1 MHz & with a LO of 108.8 MHz, what is the image frequency?
7. For a system with a matched impedance, what is the Reflection Coefficient and SWR?
8. Which property of the output capacitor is the primary cause of Low Drop Out(LDO) regulator loop instability?
（1）Equivalent series resistance(ESR)
（2）Effective series inductance(ESL)
（3）Capacitance value
（4）Dielectric material
9. The switching regulator is capable of:
（1）Higher power conversion efficiency
（2）Providing an output voltage that is higher than the input
（3）Generating an output boltage oppsite in polarity to the input
（4）All of the above
10. A linear regulator op Vin(max) = 10v, Vout(min) = 4.8v, Iout(max) = 2. 5mA, Iq(max) = 2.5mA, Ta(max) = 8.5摄氏度，The regulator is available in 3 packages.Each package has the following thermal characteristics:
Package Rja（摄氏度/W） Rjc（摄氏度/W） SO14 125 30 D1P8 100 52
Choose the most suitable package to handle the power dissipation requirement without a heat sink and why.
软件笔试题
1. How do you code an infinite loop in C?
2. Volatile:
（1）What does the keyword volatile mean? Give an example
（2）Can a parameter be both const and volatile? Give an example
（3）Can a pointer be volatile? Give an example
3. What are the values of a, b, and c after the following instructions:
int a=5, b=7, c;
c = a+++b;
4. What do the following declarations mean?
（1）const int a;
（2）int const a;
（3）const int *a;
（4）int * const a;
（5）int const * a const;
5. Which of the following statements describe the use of the keyword static?
（1）Within the body of a function: A static variable maintains its value between function revocations
（2）Within a module: A static variable is accessible by all functions within that module
（3）Within a module: A static function can only be called by other functions within that module
6. Embedded systems always require the user to manipulate bits in registers or variables. Given an integer variable a, write two code fragments. The first should set bit 5 of a. The second shnuld clear bit 5 of a. In both cases, the remaining bits should be unmodified.
7. What does the following function return?
char foo(void)
{
unsigned int a = 6;
iht b = -20;
char c;
(a+b > 6) ? (c=1): (c=0);
return c;
}
8. What will be the output of the following C code?
main()
{
int k, num= 30;
k =(num > 5 ? (num <=10 ? 100:200): 500);
printf(“%d”, k);
}
9. What will the following C code do?
int *ptr;
ptr =(int *)Ox67a9;
*ptr = Oxaa55;
10. What will be the output of the follow C code?
#define product(x) (x*x)
main()
{
int i = 3, j, k;
j = product(i++);
k = product(++i);
printf(“%d %d”,j,k);
}
11. Simplify the following Boolean expression
!((i ==12) || (j > 15))
12. How many flip-flop circuits are needed to divide by 16?
13. Provides 3 properties that make an OS, a RTOS?
14. What is pre-emption?
15. Assume the BC register value is 8538H, and the DE register value is 62 A5H.Find the value of register BC after the following assembly operations:
MOV A,C
SUB E
MOV C,A
MOV A,B
SBB D
MOV B,A
16. In the Assembly code shown below
LOOP: MVI C,78H
DCR C
JNZ LOOP
HLT
How many times is the DCR C Operation executed?
17. Describe the most efficient way (in term of execution time and code size) to divide a number by 4 in assembly language
18. what value is stored in m in the following assembly language code fragment if n=7?
LDAA #n
LABEL1: CMPA #5
BHI L3
BEQ L2
DECA
BRA L1
LABEL2: CLRA
LABEL3: STAA #m
19. What is the state of a process if a resource is not available?
#define a 365*24*60*60
20. Using the #define statement, how would you declare a manifest constant that returns the number of seconds in a year? Disregard leap years in your answer.
21. Interrupts are an important part of embedded systems. Consequently, many compiler vendors offer an extension to standard C to support interrupts. Typically, the keyword is __interrupt. The following routine (ISR). Point out problems in the code.
__interrupt double compute_area (double radius)
{
double area = PI * radius * radius;
printf(“nArea = %f”, area);
return area;
}