使用Minicom连接交换机/路由器
一、安装
yum install -y minicom
二、配置
minicom -s
+-----[configuration]------+
| Filenames and paths |
| File transfer protocols |
| Serial port setup |
| Modem and dialing |
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
| Exit from Minicom |
+--------------------------+
选择 “Serial port setup ”
+-----------------------------------------------------------------------+
| A - Serial Device : /dev/modem |
| B - Lockfile Location : /var/lock |
| C - Callin Program : |
| D - Callout Program : |
| E - Bps/Par/Bits : 38400 8N1 |
| F - Hardware Flow Control : Yes |
| G - Software Flow Control : No |
| |
| Change which setting? |
+-----------------------------------------------------------------------+
需要更改二项：
A - Serial Device ： 改为/dev/ttyS0
E - Bps/Par/Bits ： 改为9600 8N1
修改后之后,按ESC键返回到之前的菜单,选择“Save setup as...”，输入配置文件名，比如“switch_01”
+-----[configuration]------+
| Filen +-----------------------------------------+
| File |Give name to save this configuration? |
| Seria |> switch_01 |
| Modem +-----------------------------------------+
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
| Exit from Minicom |
+--------------------------+
然后选择Exit退出。
三、使用
minicom switch_01，回车，即可进入交换机操作界面
Welcome to minicom 2.1
OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n
Compiled on Jan 7 2007, 04:48:39.
Press CTRL-A Z for help on special keys
+----------------------+
| Leave Minicom? |
qoolu_lan>AT S7=45 S0=0 L1 V1 | Yes No |
^ +----------------------+
% Invalid input detected at '^' marker.
lan_switch>?
Exec commands:
access-enable Create a temporary Access-List entry
clear Reset functions
connect Open a terminal connection
crypto Encryption related commands.
disable Turn off privileged commands
disconnect Disconnect an existing network connection
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
name-connection Name an existing network connection
ping Send echo messages
rcommand Run command on remote switch
resume Resume an active network connection
set Set system parameter (not config)
show Show running system information
ssh Open a secure shell client connection
systat Display information about terminal lines
telnet Open a telnet connection
--More--
CTRL-A Z for help | 9600 8N1 | NOR | Minicom 2.1 | VT102 | Offline
按Ctrl＋A，然后按X键，输入“yes”即可退出。