ubuntu旋转第二个屏幕

参考

http://bitkickers.blogspot.com/2009/08/rotate-just-one-monitor-with.html

其实就是

1. 先用nvidia的配置窗口把/etc/X11/xorg.conf更新

2. 再在device1的section里加入

Option "Rotate" "left"

这是我的xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings

# nvidia-settings:  version 1.0  (buildd@palmer)  Fri Apr  9 10:35:18 UTC 2010

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "LEN"
    HorizSync       41.2 - 49.5
    VertRefresh     40.0 - 60.0
    Option         "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: unknown, VertRefresh source: unknown
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "LG W2361"
    HorizSync       0.0 - 0.0
    VertRefresh     0.0
    Option         "DPMS"
# Option "RandRRotation" "true"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "NVS 3100M"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "NVS 3100M"
    BusID          "PCI:1:0:0"
    Screen          1
    Option         "Rotate" "right"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
    # Option "RandRRotation" "true"
EndSection