采用libmad编写最简单的mp3播放器

采用libmad编写最简单的mp3播放器  


2011-03-18 10:39:32|  分类： linux学习 |  标签：stat  int  soundfd  sample  pcm   |字号 订阅
libmad库中附带minimad，hige level API example，minimad执行使用minimad，再加上一些音频参数设置，即可实现一个简单的mp3播放程序；
首先：在minimad.c中加入以下代码,
# include <stdio.h>
# include <unistd.h>
# include <sys/stat.h>
# include <sys/mman.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/soundcard.h>
# include "mad.h"
#undef putchar


int soundfd;
int writedsp(int c) {
return write(soundfd, (char *)&c, 1);
}


void set_dsp()
{
int rate = 441000;;                /* 采样频率 44.1KHz*/
int format = AFMT_S16_LE; /*     量化位数 16      */
int channels = 2;                 /*     声道数 2           */


soundfd = open ( "/dev/dsp", O_WRONLY);
ioctl(soundfd, SNDCTL_DSP_SPEED, &rate);
ioctl(soundfd, SNDCTL_DSP_SETFMT, &format);
ioctl(soundfd, SNDCTL_DSP_CHANNELS, &channels);
}


修改minimad代码如下：
1.在main函数中解码前调用set_dsp(),解码结束后close(soundfd);


int main(int argc, char *argv[])
{
struct stat stat;
void *fdm;


if (argc != 1)
    return 1;


if (fstat(STDIN_FILENO, &stat) == -1 ||
      stat.st_size == 0)
    return 2;


fdm = mmap(0, stat.st_size, PROT_READ, MAP_SHARED, STDIN_FILENO, 0);
if (fdm == MAP_FAILED)
    return 3;


set_dsp(); //here


decode(fdm, stat.st_size);


if (munmap(fdm, stat.st_size) == -1)
    return 4;


close(soundfd); //here


return 0;
}


2.修改output函数中的putchar为writedsp:
enum mad_flow output(void *data,
             struct mad_header const *header,
             struct mad_pcm *pcm)
{
unsigned int nchannels, nsamples;
mad_fixed_t const *left_ch, *right_ch;


/* pcm->samplerate contains the sampling frequency */


nchannels = pcm->channels;
nsamples = pcm->length;
left_ch   = pcm->samples[0];
right_ch = pcm->samples[1];


while (nsamples--) {
    signed int sample;


    /* output sample(s) in 16-bit signed little-endian PCM */


    sample = scale(*left_ch++);
    writedsp((sample >> 0) & 0xff);
    writedsp((sample >> 8) & 0xff);


    if (nchannels == 2) {
      sample = scale(*right_ch++);
      writedsp((sample >> 0) & 0xff);
      writedsp((sample >> 8) & 0xff);
    }
}


return MAD_FLOW_CONTINUE;
}




播放命令:#./minimad <music.mp3


结果：DBM上运行顺畅，而开发板上很卡，估计是AC97驱动还有待改善。