中断处理学习笔记

中断处理

如果想使用中断:

1 初始化

  A设置源头

  查看原理图

中断处理学习笔记_第1张图片

XEINT0/kpROW0/GPN0

查看芯片手册

中断处理学习笔记_第2张图片

中断处理学习笔记_第3张图片


使能

B 设置中断控制器

This chapter describes the functions and usage ofVectored Interrupt Controller in S3C6410X RISC 

microprocessor. 

12.1 OVERVIEW 

The interrupt controller in the S3C6410X is composed of2 VIC’s (Vectored Interrupt Controller, ARM PrimeCell 

PL192) and 2 TZIC’s (TrustZone Interrupt Controller, SP890). 

Two TZIC’s and VIC’s are daisy-chained to support up to 64 interrupt sources.  

12.2 FEATURES 

The Vectored Interrupt Controller features in S3C6410 incudes the following: 

• Support for 32 vectored IRQ interrupts per VIC 

• Fixed hardware interrupt priority levels 

• Programmable interrupt priority levels 

• Hardware interrupt priority level masking 

• Programmable interrupt priority level masking 

• IRQ and FIQ generation 

• Software interrupt generation 

• Raw interrupt status 

• Interrupt request status 

• Privileged mode support for restricted access

中断处理学习笔记_第4张图片中断处理学习笔记_第5张图片

  C 打开cpsr 中的I状态位(清零)

中断处理学习笔记_第6张图片

如果发生中断:

1 cpu进入irp模式

2 cpsr保存到spsr_irq

使用r13_irq,r14_irq

把下一条指令地址存放到r14中去

跳到0x18执行

保存中断

处理中断

恢复中断

中断向量寄存器

中断处理学习笔记_第7张图片

你可能感兴趣的:(中断处理学习笔记)