|
Qlogic光纤卡安装配置相对简单,但是同样的,为了是主机可以识别多个LUN信息,需要修改sd.conf配置文件。
以下是我的sd.conf的配置,供参考:
#
# Copyright (c) 1992, by Sun Microsystems, Inc.
#
#ident "@(#)sd.conf 1.9 98/01/11 SMI"
name="sd" class="scsi" class_prop="atapi"
target=0 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=1 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=2 lun=0;
name="sd" class="scsi" class_prop="atapi"
target=3 lun=0;
name="sd" class="scsi"
target=4 lun=0;
name="sd" class="scsi"
target=5 lun=0;
name="sd" class="scsi"
target=6 lun=0;
name="sd" class="scsi"
target=8 lun=0;
name="sd" class="scsi"
target=9 lun=0;
name="sd" class="scsi"
target=10 lun=0;
name="sd" class="scsi"
target=11 lun=0;
name="sd" class="scsi"
target=12 lun=0;
name="sd" class="scsi"
target=13 lun=0;
name="sd" class="scsi"
target=14 lun=0;
name="sd" class="scsi"
target=15 lun=0;
name="sd" parent="qla2300" target=0 lun=0;
name="sd" parent="qla2300" target=0 lun=1;
name="sd" parent="qla2300" target=0 lun=2;
name="sd" parent="qla2300" target=0 lun=3;
name="sd" parent="qla2300" target=0 lun=4;
name="sd" parent="qla2300" target=0 lun=5;
name="sd" parent="qla2300" target=0 lun=6;
name="sd" parent="qla2300" target=0 lun=7;
name="sd" parent="qla2300" target=1 lun=0;
name="sd" parent="qla2300" target=1 lun=1;
name="sd" parent="qla2300" target=1 lun=2;
name="sd" parent="qla2300" target=1 lun=3;
name="sd" parent="qla2300" target=1 lun=4;
name="sd" parent="qla2300" target=1 lun=5;
name="sd" parent="qla2300" target=1 lun=6;
name="sd" parent="qla2300" target=1 lun=7;
name="sd" parent="qla2300" target=2 lun=0;
name="sd" parent="qla2300" target=3 lun=0;
name="sd" parent="qla2300" target=4 lun=0;
name="sd" parent="qla2300" target=5 lun=0;
name="sd" parent="qla2300" target=6 lun=0;
name="sd" parent="qla2300" target=7 lun=0;
name="sd" parent="qla2300" target=8 lun=0;
name="sd" parent="qla2300" target=9 lun=0;
name="sd" parent="qla2300" target=10 lun=0;
name="sd" parent="qla2300" target=11 lun=0;
name="sd" parent="qla2300" target=12 lun=0;
name="sd" parent="qla2300" target=13 lun=0;
name="sd" parent="qla2300" target=14 lun=0;
name="sd" parent="qla2300" target=15 lun=0;
name="sd" parent="qla2300" target=16 lun=0;
name="sd" parent="qla2300" target=17 lun=0;
name="sd" parent="qla2300" target=17 lun=1;
name="sd" parent="qla2300" target=17 lun=2;
name="sd" parent="qla2300" target=17 lun=3;
|
配置完成以后,使用reboot -- -r选项重新启动主机系统,之后可以正常发现分配给主机系统的多个LUN。
# format
Searching for disks...done
c2t2d0: configured with capacity of 133.21GB
c2t2d1: configured with capacity of 266.41GB
c2t2d2: configured with capacity of 199.81GB
c2t2d3: configured with capacity of 60.00GB
c2t2d4: configured with capacity of 1023.94MB
c2t2d5: configured with capacity of 133.21GB
c2t2d6: configured with capacity of 60.00GB
c2t2d7: configured with capacity of 1023.94MB
c2t3d0: configured with capacity of 133.21GB
c2t3d1: configured with capacity of 266.41GB
c2t3d2: configured with capacity of 199.81GB
c2t3d3: configured with capacity of 60.00GB
c2t3d4: configured with capacity of 1023.94MB
c2t3d5: configured with capacity of 133.21GB
c2t3d6: configured with capacity of 60.00GB
c2t3d7: configured with capacity of 1023.94MB
c3t2d0: configured with capacity of 133.21GB
c3t2d1: configured with capacity of 266.41GB
c3t2d2: configured with capacity of 199.81GB
c3t2d3: configured with capacity of 60.00GB
c3t2d4: configured with capacity of 1023.94MB
c3t2d5: configured with capacity of 133.21GB
c3t2d6: configured with capacity of 60.00GB
c3t2d7: configured with capacity of 1023.94MB
c3t3d0: configured with capacity of 133.21GB
c3t3d1: configured with capacity of 266.41GB
c3t3d2: configured with capacity of 199.81GB
c3t3d3: configured with capacity of 60.00GB
c3t3d4: configured with capacity of 1023.94MB
c3t3d5: configured with capacity of 133.21GB
c3t3d6: configured with capacity of 60.00GB
c3t3d7: configured with capacity of 1023.94MB
emcpower0a: configured with capacity of 133.21GB
emcpower1a: configured with capacity of 1023.94MB
emcpower2a: configured with capacity of 60.00GB
emcpower3a: configured with capacity of 133.21GB
emcpower4a: configured with capacity of 1023.94MB
emcpower5a: configured with capacity of 60.00GB
emcpower6a: configured with capacity of 199.81GB
emcpower7a: configured with capacity of 266.41GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01077a8d1,0
1. c1t1d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01077cb01,0 2. c1t2d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107823d1,0 3. c1t3d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e010782471,0 4. c1t4d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107a6b21,0 5. c1t5d0
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e0107aacc1,0 6. c2t2d0
/pci@9,700000/fibre-channel@4/sd@2,0 7. c2t2d1
/pci@9,700000/fibre-channel@4/sd@2,1 8. c2t2d2
/pci@9,700000/fibre-channel@4/sd@2,2 9. c2t2d3
/pci@9,700000/fibre-channel@4/sd@2,3 10. c2t2d4
/pci@9,700000/fibre-channel@4/sd@2,4 11. c2t2d5
/pci@9,700000/fibre-channel@4/sd@2,5 12. c2t2d6
/pci@9,700000/fibre-channel@4/sd@2,6 13. c2t2d7
/pci@9,700000/fibre-channel@4/sd@2,7 14. c2t3d0
/pci@9,700000/fibre-channel@4/sd@3,0 15. c2t3d1
/pci@9,700000/fibre-channel@4/sd@3,1 16. c2t3d2
/pci@9,700000/fibre-channel@4/sd@3,2 17. c2t3d3
/pci@9,700000/fibre-channel@4/sd@3,3 18. c2t3d4
/pci@9,700000/fibre-channel@4/sd@3,4 19. c2t3d5
/pci@9,700000/fibre-channel@4/sd@3,5 20. c2t3d6
/pci@9,700000/fibre-channel@4/sd@3,6 21. c2t3d7
/pci@9,700000/fibre-channel@4/sd@3,7 22. c3t2d0
/pci@8,700000/fibre-channel@4/sd@2,0 23. c3t2d1
/pci@8,700000/fibre-channel@4/sd@2,1 24. c3t2d2
/pci@8,700000/fibre-channel@4/sd@2,2 25. c3t2d3
/pci@8,700000/fibre-channel@4/sd@2,3 26. c3t2d4
/pci@8,700000/fibre-channel@4/sd@2,4 27. c3t2d5
/pci@8,700000/fibre-channel@4/sd@2,5 28. c3t2d6
/pci@8,700000/fibre-channel@4/sd@2,6 29. c3t2d7
/pci@8,700000/fibre-channel@4/sd@2,7 30. c3t3d0
/pci@8,700000/fibre-channel@4/sd@3,0 31. c3t3d1
/pci@8,700000/fibre-channel@4/sd@3,1 32. c3t3d2
/pci@8,700000/fibre-channel@4/sd@3,2 33. c3t3d3
/pci@8,700000/fibre-channel@4/sd@3,3 34. c3t3d4
/pci@8,700000/fibre-channel@4/sd@3,4 35. c3t3d5
/pci@8,700000/fibre-channel@4/sd@3,5 36. c3t3d6
/pci@8,700000/fibre-channel@4/sd@3,6 37. c3t3d7
/pci@8,700000/fibre-channel@4/sd@3,7 38. emcpower0a
/pseudo/emcp@0 39. emcpower1a
/pseudo/emcp@1 40. emcpower2a
/pseudo/emcp@2 41. emcpower3a
/pseudo/emcp@3 42. emcpower4a
/pseudo/emcp@4 43. emcpower5a
/pseudo/emcp@5 44. emcpower6a
/pseudo/emcp@6 45. emcpower7a
/pseudo/emcp@7 Specify disk (enter its number): 1 selecting c1t1d0 [disk formatted] FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze the disk repair - repair a defective sector label - write label to the disk analyze - surface analysis defect - defect list management backup - search for backup labels verify - read and display labels save - save new disk/partition definitions inquiry - show vendor, product and revision volname - set 8-character volume name !
- execute
, then return quit format> q #
|
使用powerpath查看通路状态:
# powermt display dev=all
Pseudo name=emcpower6a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A91000004B1E21C02FD911 [LUN 5]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d2s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d2s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d2s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d2s0 SP B0 active alive 0 0
Pseudo name=emcpower3a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A910002070EBBEBF2FD911 [LUN 2]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d5s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d5s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d5s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d5s0 SP B0 active alive 0 0
Pseudo name=emcpower1a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A9100030349D70BF2FD911 [LUN 0]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d7s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d7s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d7s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d7s0 SP B0 active alive 0 0
Pseudo name=emcpower5a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A9100034F5B208C02FD911 [LUN 4]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d3s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d3s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d3s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d3s0 SP B0 active alive 0 0
Pseudo name=emcpower2a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A9100050F80AA1BF2FD911 [LUN 1]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d6s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d6s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d6s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d6s0 SP B0 active alive 0 0
Pseudo name=emcpower7a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A910005CD3952EC02FD911 [LUN 6]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d1s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d1s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d1s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d1s0 SP B0 active alive 0 0
Pseudo name=emcpower4a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A910007EFC11F4BF2FD911 [LUN 3]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d4s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d4s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d4s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d4s0 SP B0 active alive 0 0
Pseudo name=emcpower0a
CLARiiON ID=CK200041200044 [db880-1]
Logical device ID=60060160D2A9100096E1432DC62FD911 [LUN 7]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
1281 pci@9/fibre-channel@4 c2t2d0s0 SP A1 active alive 0 0
1281 pci@9/fibre-channel@4 c2t3d0s0 SP B1 active alive 0 0
1280 pci@8/fibre-channel@4 c3t2d0s0 SP A0 active alive 0 0
1280 pci@8/fibre-channel@4 c3t3d0s0 SP B0 active alive 0 0
|
作为对比,你可以参考一下Emulex光纤卡的配置方法:
http://www.eygle.com/unix/Emulex_LightPulse_FC9002L_Solaris9_Install.htm
本文作者: eygle,Oracle技术关注者,来自中国最大的Oracle技术论坛itpub. www.eygle.com是作者的个人站点.你可通过[email protected]来联系作者.欢迎技术探讨交流以及链接交换.
原文出处:
http://www.eygle.com/unix/Qlogic.HBA.Config.log.htm
|