handshake.

Not enough memory is available to complete this request

connection was successfully established with the server, but then an error occurred during the pre-login handshake
·2015-11-11 18:27

java.sql.SQLException: Communication failure during handshake. Is there a server running on localhos

错误如下：java.sql.SQLException:Communicationfailureduringhandshake.Isthereaserverrunningonlocalhost:3306?atcom.mysql.jdbc.MysqlIO.init(UnknownSource)atcom.mysql.jdbc.Connection.connectionInit(UnknownSourc
x_i_y_u_e·2015-09-21 15:00

CHECK_NRPE: Error - Could not complete SSL handshake.

问题：[root@modeobjects]#/usr/local/nagios/libexec/check_nrpe-H172.30.71.238-ccheck_loadCHECK_NRPE:Error-CouldnotcompleteSSLhandshake.解决方案：出现此问题原因很多，考虑排差的方面很广首先：排查客户端：第一：vinrpe.cfgcommand[check_load]=/us
u014236541·2015-03-22 20:00

彻底解决CHECK_NRPE: Error - Could not complete SSL handshake.

彻底解决CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.  出现“CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.”的错误。   问题解决的步骤：  1.确保openssh,openssl,openssl-devel版本一致。在centOS上，可以运行：yum install openssl openssl-d
guojianrui·2015-01-15 15:53

彻底解决CHECK_NRPE: Error - Could not complete SSL handshake.

彻底解决CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.  出现“CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.”的错误。   问题解决的步骤：  1.确保openssh,openssl,openssl-devel版本一致。在centOS上，可以运行：yum install openssl openssl-d
guojianrui·2015-01-15 15:53

nagios:CHECK_NRPE: Error - Could not complete SSL handshake.

1.报错信息：   CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.2.原因   nrpe配置文件没有授权服务端连接3.解决方法[root@nagiosetc]#vimnrpe.cfgallowed_hosts=192.168.1.21,127.0.0.1[root@nagiosetc]#pkillnrpe[root@nagiosetc]#/usr/lo
guoxianqi2014·2014-09-01 14:51

NRPE出现：CHECK_NRPE: Error - Could not complete SSL handshake.错误！

Nagios配置nrpe出现如下错误：CHECK_NRPE: Error - Could not complete SSL handshake.（1）/usr/local/nagios/etc/nrpe.cfg
张湾湾·2014-06-06 10:38

CHECK_NRPE: Error - Could not complete SSL handsha

Nagios配置nrpe出现如下错误：CHECK_NRPE: Error - Could not complete SSL handshake.解决方法：——>确保两边的防火墙都可以让5666端口通过！
庆沉·2014-02-26 11:00

NRPE出现：CHECK_NRPE: Error - Could not complete SSL handshake.错误！

Nagios配置nrpe出现如下错误：CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.解决方法：――>确保两边的防火墙都可以让5666端口通过！在被控端#vi/etc/xinetd.d/nrpe only_from//增加主控IP #vi/usr/local/nagios/etc/nrpe.cfg allowed_hosts//增加主控IP #servi
chenshengang·2014-01-15 10:37

NRPE出现：CHECK_NRPE: Error - Could not complete SSL handshake.错误！

Nagios配置nrpe出现如下错误：CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.解决方法：——>确保两边的防火墙都可以让5666端口通过！在被控端#vi/etc/xinetd.d/nrpe only_from//增加主控IP #vi/usr/local/nagios/etc/nrpe.cfg allowed_hosts//增加主控IP #servi
chenshengang·2014-01-15 10:37

check_nrpe命令报错：CHECK_NRPE: Error - Could not complete SSL handshake.

check_nrpe命令报错：CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.关闭执行check_nrpe命令出现如下错误：CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.此问题大概以下几个原因：1、是否安装了经openssl，openssl_devel包；如果安装了还是有问题，确认一下客户端安装的OpenSS
wushank·2013-08-30 14:53

Nagios 报错 CHECK_NRPE: Error - Could not complete SSL handshake.

在linux服务器上面监控的客户机，返回如下信息：loadcheckCRITICAL03-21-201310:25:060d2h23m23s4/4CHECK_NRPE:Error-CouldnotcompleteSSLhandshake. 查理好久，才发现是客户机器上面的nrpe.cfg里面，有一个allow_hosts参数，里面设置了允许访问的主监控nagios服务器，如果没有在这里面添加ip的
mchdba·2013-03-22 13:00

CHECK_NRPE: Error - Could not complete SSL handshake.

运行check_nrpe命令检查Nrpe安装正确与否，出现如下错误：CHECK_NRPE:Error-CouldnotcompleteSSLhandshake.检查两个方面，1：是否安装了经openssl，openssl_devel插件。              2：/usr/local/nagios/etc/nrpe.cfg此配置文件是配置正确，注意空格：allowed_host=127.0.
winsonyuan·2012-07-06 10:00

(转)SSl加密详解及CBC原理

/*full handshake.       
daeees·2010-07-01 13:00

jdbc handshake

问题内容：JDBC连MYSQL,出现Communication failure during handshake.
xitong·2010-03-20 10:00

CHECK_NRPE: Error - Could not complete SSL handshake.

Title:Debugging"CHECK_NRPE:Error-CouldnotcompleteSSLhandshake"errorsFAQID:F0191SubmittedBy:GregHaygood,EthanGalstadandOthersLastUpdated:11/03/2004Description:Whenattemptingtousethecheck_nrpeplugin,the
xq251314·2010-02-05 14:53

CHECK_NRPE: Error - Could not complete SSL handshake.

Title:Debugging"CHECK_NRPE:Error-CouldnotcompleteSSLhandshake"errorsFAQID:F0191SubmittedBy:GregHaygood,EthanGalstadandOthersLastUpdated:11/03/2004Description:Whenattemptingtousethecheck_nrpeplugin,the
xq251314·2010-02-05 14:53

Communication failure during handshake.

javax.servlet.ServletException: Communication failure during handshake.
yangrong·2007-07-24 16:00

Communication failure during handshake. Is there a server running on localhost:3306?　　错误

Communicationfailureduringhandshake.Isthereaserverrunningonlocalhost:3306?错误用Eclipse调试一个连接池出现这种问题。不能创建连接！解决方法：把mm.mysql.jar驱动换成mysql-connector-java-3.0.16-ga-bin.jar。
叽哩咕噜·2006-06-14 15:00

为什么MySQL的root用户的密码为空可以成功连接，设置密码以后即出错

出错信息如下：java.sql.SQLException: Communication failure during handshake.
wapysun·2005-03-10 16:00
上一页 1 下一页
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他