Hardware_Info.vbs 获取硬件信息的VBS代码

复制代码 代码如下:

'Hardware_Info.vbs v1.1 BY: fastslz
On Error Resume Next
Dim WMI,WS,Fso
Set WMI = GetObject("Winmgmts:{impersonationLevel=impersonate}!\\.\root\cimv2")
Set cOSs = WMI.ExecQuery("Select * from Win32_OperatingSystem")
For Each oOS in cOSs
        OSx = oOS.Caption &" " & oOS.CSDVersion  & vbCrLf
Next
BBx= "――――――――――――主板信息――――――――――――"  & vbCrLf
Set Board = WMI.InstancesOf("Win32_BaseBoard")
Set Bios = WMI.InstancesOf("Win32_Bios")
For Each oBoard In Board
BBx = BBx _
    & "主板名称: " & oBoard.Product &vbTab & oBoard.Version & vbCrLf _
    & "制造厂商: " & oBoard.Manufacturer                    & vbCrLf
Next
For Each oBios In Bios
BBx = BBx _
    & "BIOS厂商: " & oBios.Manufacturer                     & vbCrLf _
    & "BIOS日期: " & FormatDateTime(wDate(Trim(oBios.ReleaseDate)),1)  & vbCrLf _
    & "BIOS版本: " & oBios.SMBIOSBIOSVersion & vbCrLf _
    & "OEM 版本: " & oBios.Version           & vbCrLf
Next
Set Bios = Nothing:Set Board  = Nothing

CPUx = "―――――――――――处理器信息―――――――――――"  & vbCrLf
Set CPUs = WMI.InstancesOf("Win32_Processor")
Set Caches = WMI.InstancesOf("Win32_CacheMemory")
For Each ObjCPU In CPUs
MCS = ObjCPU.MaxClockSpeed :CCS = ObjCPU.CurrentClockSpeed
If ObjCPU.MaxClockSpeed Mod 2 = 1 Then MCS = CCS + 1
If ObjCPU.CurrentClockSpeed Mod 2 = 1 Then CCS = CCS + 1
OC = QOC(CCS,MCS)
If (OC-MCS) >  10 and (OC-MCS) > 0 Then OCLC = "  超频比率: " & FormatPercent((OC-MCS)/MCS)
If (OC-MCS) < -10 and (OC-MCS) < 0 Then OCLC = "  降频比率: " & FormatPercent((OC-MCS)/MCS)
CPUx = CPUx _
     & "CPU 名称: " & Trim(ObjCPU.Name)                & vbCrLf _
     & "CPU 构架: " & ObjCPU.Description               & vbCrLf _
     & "制造厂商: " & ObjCPU.Manufacturer              & vbCrLf _
     & "接口规格: " & ObjCPU.SocketDesignation         & vbCrLf _
     & "CPU 数量: " & ObjCPU.CpuStatus                 & vbCrLf _
     & "核心数量: " & ObjCPU.NumberOfCores             & vbCrLf _
     & "线程数量: " & ObjCPU.NumberOfLogicalProcessors & vbCrLf _
     & "地址位宽: " & ObjCPU.AddressWidth & " Bit"     & vbCrLf _
     & "数据位宽: " & ObjCPU.DataWidth    & " Bit"     & vbCrLf _
     & "CPU 电压: " & ObjCPU.CurrentVoltage / 10 & "V" & vbCrLf _
     & "外部频率: " & ObjCPU.ExtClock  & " MHz"        & vbCrLf _
     & "当前频率: " & OC               & " MHz" & OCLC & vbCrLf _
     & "原始频率: " & MCS              & " MHz"        & vbCrLf _
     & "CPU 使用: " & ObjCPU.LoadPercentage  & "%"     & vbCrLf
Next
Function QOC(CCS,MCS)
    If CCS = MCS Then
        Set wReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
        wReg.GetDWORDValue &H80000002,"HARDWARE\DESCRIPTION\System\CentralProcessor\0","~MHz",strValue
        OC = strValue :Set wReg = Nothing
        Else
        OC = CCS
    End If
    QOC = OC :If QOC Mod 2 = 1 Then QOC = QOC + 1
End Function
For Each ObjCache In Caches
    If objCache.MaxCacheSize > 0  Then
        Select Case objCache.Purpose
        case "L1-Cache"
        CPUx = CPUx & "一级缓存: " & objCache.MaxCacheSize & "KB    (L1数据＋L1缓存)" & vbCrLf
        case "L2-Cache"
        CPUx = CPUx & "二级缓存: " & objCache.MaxCacheSize & " KB" & vbCrLf
        case "L3-Cache"
        CPUx = CPUx & "三级缓存: " & objCache.MaxCacheSize & " KB" & vbCrLf
        End Select
    End If
Next
Set Caches = Nothing:Set CPUs = Nothing

Memx = "――――――――――――内存信息――――――――――――" & vbCrLf
Set Memorys = WMI.InstancesOf("Win32_PhysicalMemory")
Set MemKY = WMI.InstancesOf("Win32_OperatingSystem")
For Each aKY In MemKY
    ZL = aKY.TotalVisibleMemorySize
    KY = aKY.FreePhysicalMemory
Next
Mems = 0:Memc = 0
Types = Array("Unknown","Other","DRAM","Synchronous DRAM","Cache DRAM","EDO","EDRAM","VRAM","SRAM", "RAM", _
               "ROM","Flash","EEPROM","FEPROM","EPROM","CDRAM","3DRAM","SDRAM","SGRAM","RDRAM","DDR","DDR2")
For Each Mem In Memorys
    For i = 0 To UBound(Types)
        If Mem.MemoryType = i Then MemType = Types(i) :End If
    Next
    For j = 0 To 6
        Select Case Mem.Tag
            case "Physical Memory " & j
            Mems = Mems+(Mem.Capacity)
            Memx = Memx  &"插槽" & Mem.DeviceLocator & ": " & Round(Mem.Capacity/1048576) &" MB  " _
                         & MemType & "-" & Mem.Speed & "MHz" & " 数据带宽" & Mem.DataWidth _
                         & "Bit" & " 总带宽" & Mem.TotalWidth &"Bit" & vbCrLf
        End Select
    Next
Next
Memx = Memx _
     & "内存安装: "& Round(Mems/1048576)&" MB " & vbCrLf _
     & "内存总量: "& Round(ZL/1024)& " MB" & vbCrLf _
     & "内存可用: "& Round(KY/1024)& " MB" & vbCrLf _ 
     & "内存使用率: " &FormatPercent((ZL-KY)/ZL)& vbCrLf
Set Memorys = Nothing:Set MemKY = Nothing

Vx= "――――――――――――显卡信息――――――――――――"  & vbCrLf
Set cVID = WMI.ExecQuery("SELECT DeviceID FROM Win32_VideoController")
For Each oVID In cVID
    Set Video = WMI.ExecQuery("SELECT * FROM Win32_VideoController WHERE DeviceID='"& oVID.DeviceID &"'")
    For Each oVideo In Video
        Vx = Vx _
        & "显卡名称: " & oVideo.Name                                    & vbCrLf _
        & "制造厂商: " & oVideo.AdapterCompatibility                    & vbCrLf _
        & "物理显存: " & Round(oVideo.AdapterRAM/1048576)&" MB "        & vbCrLf _
        & "显示模式: " & oVideo.CurrentHorizontalResolution &" X " _
                       & oVideo.CurrentVerticalResolution   &" "_
                       & oVideo.CurrentBitsPerPixel         &"Bit " _
                       & oVideo.CurrentRefreshRate          &"Hz"     & vbCrLf
    Next
Next
Set Video = Nothing:Set cVID = Nothing

Dx= "――――――――――――硬盘信息――――――――――――"  & vbCrLf
Set IDE = WMI.ExecQuery("Select * from Win32_DiskDrive WHERE InterfaceType='IDE'")
Set cPPP = WMI.ExecQuery("SELECT * FROM Win32_PerfRawData_PerfDisk_PhysicalDisk")
For Each oIDE In IDE
    For i = 0 To IDE.Count
        Select Case oIDE.Index
            Case i
               For Each oPPP In cPPP
                   If InStr(oPPP.Name, i) Then vName = oPPP.Name
               Next
               Dx = Dx & "硬盘" & i &"型号:" & oIDE.Caption                   & vbCrLf _
               & vbTab & "标称容量: "    & Round(oIDE.Size/1000000000) &" GB" & vbCrLf _
               & vbTab & "实际容量: "    & Round(oIDE.Size/1073741824) &" GB" & vbCrLf _
               & vbTab & "柱面数: "      & oIDE.TotalCylinders                & vbCrLf _
               & vbTab & "磁头数: "      & oIDE.TotalHeads                    & vbCrLf _
               & vbTab & "每道扇区数: "  & oIDE.SectorsPerTrack               & vbCrLf _
               & vbTab & "扇区大小: "    & oIDE.BytesPerSector                & vbCrLf _
               & vbTab & "总扇区数: "    & oIDE.TotalSectors                  & vbCrLf _
               & vbTab & "分区状态: "    & vName  & vbCrLf
               DevID = Replace(oIDE.DeviceID, "\", "\\")
               Set cDP = WMI.ExecQuery("ASSOCIATORS OF {Win32_DiskDrive.DeviceID="""& DevID &"""}" _
               & "WHERE AssocClass = Win32_DiskDriveToDiskPartition")
               For Each oDP In cDP
                 Set cLD = WMI.ExecQuery("ASSOCIATORS OF {Win32_DiskPartition.DeviceID="""& oDP.DeviceID &"""}" _
                 & "WHERE AssocClass = Win32_LogicalDiskToPartition")
                   For Each oLD In cLD
                     Dx = Dx _
                        & vbTab & oLD.DeviceID &" " & Left(oLD.VolumeName&"         " ,11) & Left(oLD.FileSystem&"   " ,6) & "共:" _
                        & Right("    "&Round(oLD.Size/1073741824,1),6)                &" GB    可用:" _
                        & Right("    "&Round(oLD.FreeSpace/1073741824,1),6)           &" GB    已用:" _
                        & Right("    "&Round((oLD.Size-oLD.FreeSpace)/1073741824,1),6)&" GB" & vbCrLf
                   Next
              Next
        End Select
    Next
Next
Set cLD = Nothing:Set cDP = Nothing:Set IDE = Nothing:Set cDP = Nothing:Set cPPP =  Nothing

Sx= "――――――――――――声卡信息――――――――――――"  & vbCrLf
Set cSD = WMI.ExecQuery("SELECT * FROM Win32_SoundDevice")
For Each oSD In cSD
    Sx = Sx & "声卡名称: " & oSD.ProductName  & vbCrLf
Next
Set cSD = Nothing
Nx= "――――――――――――网卡信息――――――――――――"  & vbCrLf
Set cNet = WMI.ExecQuery("Select * from Win32_NetworkAdapter WHERE PhysicalAdapter ='TRUE'")
If CStr(cNet.Count) < 0 Then
    Set cNet = WMI.ExecQuery("Select * from Win32_NetworkAdapter WHERE PNPDeviceID Like 'PCI%%' or PNPDeviceID Like 'USB%%'")
    For Each oNet In cNet
        If oNet.NetConnectionStatus > 0 Then
           Nx = Nx & "网卡名称: "& oNet.Name & vbCrLf
           Else
           Nx = Nx & "网卡名称: "& oNet.Name & vbCrLf
        End If
    Next
    Else
    For Each oNet In cNet
        If oNet.NetEnabled = TRUE Then
           Nx = Nx & "网卡名称: "& oNet.Name & vbTab & "活跃状态" & vbCrLf
           Else
           Nx = Nx & "网卡名称: "& oNet.Name & vbTab & "空闲状态" & vbCrLf
        End If
    Next
End If
Set cNet = Nothing

If (Lcase(Right(Wscript.FullName,11)) = "wscript.exe") Then
    MsgBox OSx & BBx & CPUx & Memx ,,"Hardware_Info.vbs v1.0 BY: fastslz"
    MsgBox Vx & Sx & Nx  ,,"Hardware_Info.vbs v1.0 BY: fastslz"
    MsgBox Dx ,, "Hardware_Info.vbs v1.0 BY: fastslz"
    MsgN = MsgBox ("是否保存到文件？" , 32+4 , "Hardware_Info.vbs v1.0 BY: fastslz")
    If MsgN = 6 Then JZCSx = JZCS :wInfo
    Else
    WScript.Echo OSx & BBx & CPUx & Memx & Vx & Sx & Nx & Dx
End If
Set WMI = Nothing

Sub wInfo()
    Set WS = CreateObject("WScript.Shell")
    Set Fso = CreateObject("Scripting.FileSystemObject")
    aFile = WS.CurrentDirectory &"\"& WS.ExpandEnvironmentStrings("%COMPUTERNAME%")&"_Hardware_Info.txt"
    Set HInfo = Fso.CreateTextFile(aFile , True)
    HInfo.WriteLine "Hardware_Info.vbs BY: fastslz"
    HInfo.WriteLine OSx & BBx & CPUx & Memx & Vx & Sx & Nx & Dx & JZCSx
    HInfo.Close
    WS.Run Chr(34) & aFile & Chr(34)
Set WS = Nothing:Set Fso = Nothing:Set HInfo = Nothing
End Sub

Function wDate(nD)
    If Not IsNull(nD) Then
    wDate = CDate(Mid(nD,5,2)&"/"&Mid(nD,7,2)&"/"&Left(nD,4)&" "&Mid(nD,9,2)&":"&Mid(nD,11,2)&":"&Mid(nD,13,2))
    End If
End Function

Function JZCS()
    NumMsg = vbCrLf & "―――――――――――简易CPU基准测试―――――――――――" & vbCrLf
    Dim I,T1,T2,Tempvalue,aRunTime,bRunTime
    T1 = Timer()
    For I = 1 To 2000000
        Tempvalue= 2^0.5
    Next
    T2 = Timer()
    aRunTime = FormatNumber((T2-T1)*1000,2)
    NumMsg =  NumMsg & "CPU 200万次开方计算所需时间：" &aRunTime&" 毫秒" & vbCrLf
    T1 = Timer()
    For I = 1 To 6000000
        Tempvalue= 1 + 1
    Next
    T2 = Timer()
    bRunTime = FormatNumber((T2-T1)*1000,2)
    NumMsg =  NumMsg & "CPU 600万次加法计算所需时间："&bRunTime&" 毫秒" & vbCrLf
    JZCS = NumMsg
End Function

cmd调用方法

复制代码 代码如下:

@echo off
for /f "delims=*" %%a In ('Cscript //Nologo "Hardware_Info.vbs"^|find ":"') do echo %%a

:在第二个硬盘第一个分区新建Backup文件夹
for /f "tokens=2,*" %%a In ('Cscript //Nologo "Hardware_Info.vbs"^|findstr  "分区状态"') do (
    if %%a#==1# for /f "tokens=1" %%i In ("%%b") do MD "%%i\Backup")
pause