在linux下搭建NTP服务器

阅读更多

最近搭建了NTP时间服务器,下面就将整个过程记录下来,为他人也为自己,即使很简单。

  具体步骤:1,下载NTP时间服务器的.tar.gz包到linux下,解压到自己喜欢的目录

                       2,直接./configure,然后make

                       3,这样在众多文件夹里面就有叫/ntpd和/ntpq、/ntpdate的文件夹了,这里面就有编译生成的命令了,可以拿来直接使用的。很多人觉得要make install,我个人觉得没必要。

                       4,简单的NTP服务器需要,一个ntpd指令,一个ntp.conf配置文件,再一个ntpq指令就够了,如果想做客户端的话当然得要用ntpdate指令了。

                       5,配置文件要考在/etc/ntp.conf,如果做服务器这里的配置文件可以这么写,见底部。

      遇到的问题:两台linux之间,有时#./ntpd 后,#ps -e 可以看到该进程,但是客户端就是连不上,虽然可以ping通,最后发现果然和google上说的一样,要注意时间,有的NTP服务器要一个小时才能正常工作(鸟哥说的),所以如果你的服务器还是不好使,不妨等上一会,然后在试。

我的配置文件:

# For more information about this file, see the man pages

# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).

driftfile /var/lib/ntp/drift

# Permit time synchronization with our time source, but do not

# permit the source to query or modify the service on this system.

restrict default nomodify

restrict -6 default  nomodify

# Permit all access over the loopback interface.  This could

# be tightened as well, but to do so would effect some of

# the administrative functions.

restrict 127.0.0.1 

restrict -6 ::1

# Hosts on local network are less restricted.

#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap

# Use public servers from the pool.ntp.org project.

# Please consider joining the pool (http://www.pool.ntp.org/join.html).

#server 0.fedora.pool.ntp.org iburst

#server 1.fedora.pool.ntp.org iburst

#server 2.fedora.pool.ntp.org iburst

#server 3.fedora.pool.ntp.org iburst

#broadcast 192.168.1.255 autokey # broadcast server

#broadcastclient   # broadcast client

#broadcast 224.0.1.1 autokey  # multicast server

#multicastclient 224.0.1.1  # multicast client

#manycastserver 239.255.254.254  # manycast server

#manycastclient 239.255.254.254 autokey # manycast client

# Undisciplined Local Clock. This is a fake driver intended for backup

# and when no outside source of synchronized time is available. 

server 127.127.1.0 # local clock

fudge 127.127.1.0 stratum 10 

# Enable public key cryptography.

#crypto

includefile /etc/ntp/crypto/pw

# Key file containing the keys and key identifiers used when operating

# with symmetric key cryptography. 

keys /etc/ntp/keys

# Specify the key identifiers which are trusted.

#trustedkey 4 8 42

# Specify the key identifier to use with the ntpdc utility.

#requestkey 8

# Specify the key identifier to use with the ntpq utility.

#controlkey 8

# Enable writing of statistics records.

#statistics clockstats cryptostats loopstats peerstats

 

你可能感兴趣的:(linux,access)