speex 和libogg 编译

阅读更多

下载：
http://www.speex.org/downloads/
http://xiph.org/downloads/

建立 jni 文件夹，然后从下载的文件夹中提取相关文件 放到jni下 

/libspeex/* 		? /jni/libspeex/
/include/speex/* 	? /jni/include/speex/
/src/wav_io.h 	? /jni/include/speex
/src/* 		? /jni/libogg/
/include/ogg/* 	? /jni/include/ogg

编辑jni/include/speex/speex_config_types.h.in  用后面的取代前面的

@SIZE16@ with short
@SIZE32@ with int

然后将此文件重新命名为speex_config_types.h

同样
/jni/include/ogg/config_types.h.in

@INCLUDE_INTTYPES_H@ 	with 1
@INCLUDE_STDINT_H@	with 1
@INCLUDE_SYS_TYPES_H@	with 1
@SIZE16@ 	with short
@USIZE16@ 	with unsigned short
@SIZE32@ 	with int
@USIZE32@	with unsigned int
@SIZE64@ 	with long long

在jni 目录下 Android.mk
LOCAL_PATH := $(call my-dir)
 
include $(CLEAR_VARS)
 
LOCAL_MODULE    := libspeex
LOCAL_CFLAGS = -DFIXED_POINT -DUSE_KISS_FFT -DEXPORT="" -UHAVE_CONFIG_H
LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
 
LOCAL_SRC_FILES :=  \
./libspeex/bits.c \
./libspeex/buffer.c \
./libspeex/cb_search.c \
./libspeex/exc_10_16_table.c \
./libspeex/exc_10_32_table.c \
./libspeex/exc_20_32_table.c \
./libspeex/exc_5_256_table.c \
./libspeex/exc_5_64_table.c \
./libspeex/exc_8_128_table.c \
./libspeex/fftwrap.c \
./libspeex/filterbank.c \
./libspeex/filters.c \
./libspeex/gain_table.c \
./libspeex/gain_table_lbr.c \
./libspeex/hexc_10_32_table.c \
./libspeex/hexc_table.c \
./libspeex/high_lsp_tables.c \
./libspeex/jitter.c \
./libspeex/kiss_fft.c \
./libspeex/kiss_fftr.c \
./libspeex/lpc.c \
./libspeex/lsp.c \
./libspeex/lsp_tables_nb.c \
./libspeex/ltp.c \
./libspeex/mdf.c \
./libspeex/modes.c \
./libspeex/modes_wb.c \
./libspeex/nb_celp.c \
./libspeex/preprocess.c \
./libspeex/quant_lsp.c \
./libspeex/resample.c \
./libspeex/sb_celp.c \
./libspeex/scal.c \
./libspeex/smallft.c \
./libspeex/speex.c \
./libspeex/speex_callbacks.c \
./libspeex/speex_header.c \
./libspeex/stereo.c \
./libspeex/vbr.c \
./libspeex/vq.c \
./libspeex/window.c \
./libogg/bitwise.c \
./libogg/framing.c
  
include $(BUILD_SHARED_LIBRARY)
如此就编写好了。

2.为了调用 还需要添加jni 文件

#include 

#include 
#include 

#include 

static int codec_open = 0;

static int dec_frame_size;
static int enc_frame_size;

static SpeexBits ebits, dbits;
void *enc_state;
void *dec_state;

static JavaVM *gJavaVM;

extern "C"
JNIEXPORT jint JNICALL Java_com_ultraman_Speex_open
  (JNIEnv *env, jobject obj, jint compression) {
	int tmp;

	if (codec_open++ != 0)
		return (jint)0;

	speex_bits_init(&ebits);
	speex_bits_init(&dbits);

	enc_state = speex_encoder_init(&speex_nb_mode);
	dec_state = speex_decoder_init(&speex_nb_mode);
	tmp = compression;
	speex_encoder_ctl(enc_state, SPEEX_SET_QUALITY, &tmp);
	speex_encoder_ctl(enc_state, SPEEX_GET_FRAME_SIZE, &enc_frame_size);
	speex_decoder_ctl(dec_state, SPEEX_GET_FRAME_SIZE, &dec_frame_size);

	return (jint)0;
}

extern "C"
JNIEXPORT jint Java_com_ultraman_Speex_encode
    (JNIEnv *env, jobject obj, jshortArray lin, jint offset, jbyteArray encoded, jint size) {

        jshort buffer[enc_frame_size];
        jbyte output_buffer[enc_frame_size];
	int nsamples = (size-1)/enc_frame_size + 1;
	int i, tot_bytes = 0;

	if (!codec_open)
		return 0;

	speex_bits_reset(&ebits);

	for (i = 0; i < nsamples; i++) {
		env->GetShortArrayRegion(lin, offset + i*enc_frame_size, enc_frame_size, buffer);
		speex_encode_int(enc_state, buffer, &ebits);
	}
	//env->GetShortArrayRegion(lin, offset, enc_frame_size, buffer);
	//speex_encode_int(enc_state, buffer, &ebits);

	tot_bytes = speex_bits_write(&ebits, (char *)output_buffer,
				     enc_frame_size);
	env->SetByteArrayRegion(encoded, 0, tot_bytes,
				output_buffer);

        return (jint)tot_bytes;
}

extern "C"
JNIEXPORT jint JNICALL Java_com_ultraman_Speex_decode
    (JNIEnv *env, jobject obj, jbyteArray encoded, jshortArray lin, jint size) {

        jbyte buffer[dec_frame_size];
        jshort output_buffer[dec_frame_size];
        jsize encoded_length = size;

	if (!codec_open)
		return 0;

	env->GetByteArrayRegion(encoded, 0, encoded_length, buffer);
	speex_bits_read_from(&dbits, (char *)buffer, encoded_length);
	speex_decode_int(dec_state, &dbits, output_buffer);
	env->SetShortArrayRegion(lin, 0, dec_frame_size,
				 output_buffer);

	return (jint)dec_frame_size;
}

extern "C"
JNIEXPORT jint JNICALL Java_com_ultraman_Speex_getFrameSize
    (JNIEnv *env, jobject obj) {

	if (!codec_open)
		return 0;
	return (jint)enc_frame_size;

}

extern "C"
JNIEXPORT void JNICALL Java_com_ultraman_Speex_close
    (JNIEnv *env, jobject obj) {

	if (--codec_open != 0)
		return;

	speex_bits_destroy(&ebits);
	speex_bits_destroy(&dbits);
	speex_decoder_destroy(dec_state);
	speex_encoder_destroy(enc_state);
}

命名为speex_jni.cpp  放在jni下面

然后在android.mk 下追加 最后一行
./libogg/bitwise.c \
./libogg/framing.c \
./speex_jni.cpp

java层调用
package com.audio;

class Speex  {

	/* quality
	 * 1 : 4kbps (very noticeable artifacts, usually intelligible)
	 * 2 : 6kbps (very noticeable artifacts, good intelligibility)
	 * 4 : 8kbps (noticeable artifacts sometimes)
	 * 6 : 11kpbs (artifacts usually only noticeable with headphones)
	 * 8 : 15kbps (artifacts not usually noticeable)
	 */
	private static final int DEFAULT_COMPRESSION = 8;

	Speex() {
	}

	public void init() {
		load();	
		open(DEFAULT_COMPRESSION);
	}
	
	private void load() {
		try {
			System.loadLibrary("speex");
		} catch (Throwable e) {
			e.printStackTrace();
		}

	}

	public native int open(int compression);
	public native int getFrameSize();
	public native int decode(byte encoded[], short lin[], int size);
	public native int encode(short lin[], int offset, byte encoded[], int size);
	public native void close();
	
}

 附件是生成的speex。so 和相关的jni文件

• speex.rar (400.7 KB)
• 下载次数: 59