前面我们分析到，在URLRequestHttpJob::StartTransactionInternal()中，会通过URLRequestContext的HttpTransactionFactory创建HttpTransaction，在URLRequestContextBuilder::Build()中创建HttpTransactionFactory的过程如下：
storage->set_http_network_session(
base::WrapUnique(new HttpNetworkSession(network_session_params)));
std::unique_ptr http_transaction_factory;
if (http_cache_enabled_) {
std::unique_ptr http_cache_backend;
if (http_cache_params_.type != HttpCacheParams::IN_MEMORY) {
BackendType backend_type =
http_cache_params_.type == HttpCacheParams::DISK
? CACHE_BACKEND_DEFAULT
: CACHE_BACKEND_SIMPLE;
http_cache_backend.reset(new HttpCache::DefaultBackend(
DISK_CACHE, backend_type, http_cache_params_.path,
http_cache_params_.max_size, context->GetFileTaskRunner()));
} else {
http_cache_backend =
HttpCache::DefaultBackend::InMemory(http_cache_params_.max_size);
}
LOG(INFO) << "Cache is enabled, to create HttpCache";
http_transaction_factory.reset(new HttpCache(
storage->http_network_session(), std::move(http_cache_backend), true));
} else {
LOG(INFO) << "Cache is disabled, to create HttpNetworkLayer";
http_transaction_factory.reset(
new HttpNetworkLayer(storage->http_network_session()));
}
storage->set_http_transaction_factory(std::move(http_transaction_factory));
Chromium net中有两个HttpTransactionFactory的实现，分别是HttpCache和HttpNetworkLayer，它们分别在cache被打开和被关闭时用到。这里还会创建HttpNetworkSession。而在cache打开时，在创建HttpCache的同时，还会为它创建http_cache_backend。
HttpCache的创建过程(chromium_android/src/net/http/http_cache.cc)如下：
//-----------------------------------------------------------------------------
HttpCache::HttpCache(HttpNetworkSession* session,
std::unique_ptr backend_factory,
bool set_up_quic_server_info)
: HttpCache(base::WrapUnique(new HttpNetworkLayer(session)),
std::move(backend_factory),
set_up_quic_server_info) {}
HttpCache::HttpCache(std::unique_ptr network_layer,
std::unique_ptr backend_factory,
bool set_up_quic_server_info)
: net_log_(nullptr),
backend_factory_(std::move(backend_factory)),
building_backend_(false),
bypass_lock_for_test_(false),
fail_conditionalization_for_test_(false),
mode_(NORMAL),
network_layer_(std::move(network_layer)),
clock_(new base::DefaultClock()),
weak_factory_(this) {
HttpNetworkSession* session = network_layer_->GetSession();
// Session may be NULL in unittests.
// TODO(mmenke): Seems like tests could be changed to provide a session,
// rather than having logic only used in unit tests here.
if (session) {
net_log_ = session->net_log();
if (set_up_quic_server_info &&
!session->quic_stream_factory()->has_quic_server_info_factory()) {
// QuicStreamFactory takes ownership of QuicServerInfoFactoryAdaptor.
session->quic_stream_factory()->set_quic_server_info_factory(
new QuicServerInfoFactoryAdaptor(this));
}
}
}
这里还是会创建HttpNetworkLayer。HttpTransactionFactory相关的几个类之间的关系如下：
HttpTransactionFactory
HttpNetworkTransaction表示一个直接的网络事务，可以理解为一个网络连接。HttpNetworkSession用于管理网络连接。HttpNetworkLayer主要用于创建HttpNetworkTransaction。HttpCache和HttpCache::Transaction用于处理缓存。HttpCache::Transaction表示一个启用了缓存的网络事务，它会借助于HttpCache保存的HttpNetworkLayer引用创建HttpNetworkTransaction，借助于HttpNetworkTransaction访问网络，并根据需要将结果缓存起来。HttpCache则对缓存进行管理。HttpNetworkLayer和HttpCache都是HttpTransactionFactory，而HttpNetworkTransaction和HttpCache::Transaction都是HttpTransaction。
我们先不关心启用cache时，HTTP请求的处理流程，来看HttpNetworkLayer。则在URLRequestHttpJob::StartTransactionInternal()中将通过HttpNetworkLayer创建类型为HttpNetworkTransaction的HttpTransaction：
HttpNetworkLayer::HttpNetworkLayer(HttpNetworkSession* session)
: session_(session),
suspended_(false) {
DCHECK(session_);
#if defined(OS_WIN)
base::PowerMonitor* power_monitor = base::PowerMonitor::Get();
if (power_monitor)
power_monitor->AddObserver(this);
#endif
}
HttpNetworkLayer::~HttpNetworkLayer() {
#if defined(OS_WIN)
base::PowerMonitor* power_monitor = base::PowerMonitor::Get();
if (power_monitor)
power_monitor->RemoveObserver(this);
#endif
}
int HttpNetworkLayer::CreateTransaction(
RequestPriority priority,
std::unique_ptr* trans) {
if (suspended_)
return ERR_NETWORK_IO_SUSPENDED;
trans->reset(new HttpNetworkTransaction(priority, GetSession()));
return OK;
}
HttpCache* HttpNetworkLayer::GetCache() {
return NULL;
}
HttpNetworkSession* HttpNetworkLayer::GetSession() {
return session_;
}
void HttpNetworkLayer::OnSuspend() {
suspended_ = true;
session_->CloseIdleConnections();
}
void HttpNetworkLayer::OnResume() {
suspended_ = false;
}
URLRequestHttpJob::StartTransactionInternal()创建了HttpTransaction之后，它会执行HttpTransaction的Start()来启动对HTTP事务的处理，HttpNetworkTransaction的Start()定义如下：
int HttpNetworkTransaction::Start(const HttpRequestInfo* request_info,
const CompletionCallback& callback,
const BoundNetLog& net_log) {
net_log_ = net_log;
request_ = request_info;
// Now that we have an HttpRequestInfo object, update server_ssl_config_.
session_->GetSSLConfig(*request_, &server_ssl_config_, &proxy_ssl_config_);
if (request_->load_flags & LOAD_DISABLE_CERT_REVOCATION_CHECKING) {
server_ssl_config_.rev_checking_enabled = false;
proxy_ssl_config_.rev_checking_enabled = false;
}
if (request_->load_flags & LOAD_PREFETCH)
response_.unused_since_prefetch = true;
next_state_ = STATE_NOTIFY_BEFORE_CREATE_STREAM;
int rv = DoLoop(OK);
if (rv == ERR_IO_PENDING)
callback_ = callback;
return rv;
}
Chromium net将所有HTTP请求的处理抽象为几个步骤，并通过一个循环DoLoop()来一步一步地执行。DoLoop()的定义 (chromium_android/src/net/http/http_network_transaction.cc) 如下：
int HttpNetworkTransaction::DoLoop(int result) {
DCHECK(next_state_ != STATE_NONE);
int rv = result;
do {
State state = next_state_;
next_state_ = STATE_NONE;
switch (state) {
case STATE_NOTIFY_BEFORE_CREATE_STREAM:
DCHECK_EQ(OK, rv);
rv = DoNotifyBeforeCreateStream();
break;
case STATE_CREATE_STREAM:
DCHECK_EQ(OK, rv);
rv = DoCreateStream();
break;
case STATE_CREATE_STREAM_COMPLETE:
rv = DoCreateStreamComplete(rv);
break;
case STATE_INIT_STREAM:
DCHECK_EQ(OK, rv);
rv = DoInitStream();
break;
case STATE_INIT_STREAM_COMPLETE:
rv = DoInitStreamComplete(rv);
break;
case STATE_GENERATE_PROXY_AUTH_TOKEN:
DCHECK_EQ(OK, rv);
rv = DoGenerateProxyAuthToken();
break;
case STATE_GENERATE_PROXY_AUTH_TOKEN_COMPLETE:
rv = DoGenerateProxyAuthTokenComplete(rv);
break;
case STATE_GENERATE_SERVER_AUTH_TOKEN:
DCHECK_EQ(OK, rv);
rv = DoGenerateServerAuthToken();
break;
case STATE_GENERATE_SERVER_AUTH_TOKEN_COMPLETE:
rv = DoGenerateServerAuthTokenComplete(rv);
break;
case STATE_GET_PROVIDED_TOKEN_BINDING_KEY:
DCHECK_EQ(OK, rv);
rv = DoGetProvidedTokenBindingKey();
break;
case STATE_GET_PROVIDED_TOKEN_BINDING_KEY_COMPLETE:
rv = DoGetProvidedTokenBindingKeyComplete(rv);
break;
case STATE_GET_REFERRED_TOKEN_BINDING_KEY:
DCHECK_EQ(OK, rv);
rv = DoGetReferredTokenBindingKey();
break;
case STATE_GET_REFERRED_TOKEN_BINDING_KEY_COMPLETE:
rv = DoGetReferredTokenBindingKeyComplete(rv);
break;
case STATE_INIT_REQUEST_BODY:
DCHECK_EQ(OK, rv);
rv = DoInitRequestBody();
break;
case STATE_INIT_REQUEST_BODY_COMPLETE:
rv = DoInitRequestBodyComplete(rv);
break;
case STATE_BUILD_REQUEST:
DCHECK_EQ(OK, rv);
net_log_.BeginEvent(NetLog::TYPE_HTTP_TRANSACTION_SEND_REQUEST);
rv = DoBuildRequest();
break;
case STATE_BUILD_REQUEST_COMPLETE:
rv = DoBuildRequestComplete(rv);
break;
case STATE_SEND_REQUEST:
DCHECK_EQ(OK, rv);
rv = DoSendRequest();
break;
case STATE_SEND_REQUEST_COMPLETE:
rv = DoSendRequestComplete(rv);
net_log_.EndEventWithNetErrorCode(
NetLog::TYPE_HTTP_TRANSACTION_SEND_REQUEST, rv);
break;
case STATE_READ_HEADERS:
DCHECK_EQ(OK, rv);
net_log_.BeginEvent(NetLog::TYPE_HTTP_TRANSACTION_READ_HEADERS);
rv = DoReadHeaders();
break;
case STATE_READ_HEADERS_COMPLETE:
rv = DoReadHeadersComplete(rv);
net_log_.EndEventWithNetErrorCode(
NetLog::TYPE_HTTP_TRANSACTION_READ_HEADERS, rv);
break;
case STATE_READ_BODY:
DCHECK_EQ(OK, rv);
net_log_.BeginEvent(NetLog::TYPE_HTTP_TRANSACTION_READ_BODY);
rv = DoReadBody();
break;
case STATE_READ_BODY_COMPLETE:
rv = DoReadBodyComplete(rv);
net_log_.EndEventWithNetErrorCode(
NetLog::TYPE_HTTP_TRANSACTION_READ_BODY, rv);
break;
case STATE_DRAIN_BODY_FOR_AUTH_RESTART:
DCHECK_EQ(OK, rv);
net_log_.BeginEvent(
NetLog::TYPE_HTTP_TRANSACTION_DRAIN_BODY_FOR_AUTH_RESTART);
rv = DoDrainBodyForAuthRestart();
break;
case STATE_DRAIN_BODY_FOR_AUTH_RESTART_COMPLETE:
rv = DoDrainBodyForAuthRestartComplete(rv);
net_log_.EndEventWithNetErrorCode(
NetLog::TYPE_HTTP_TRANSACTION_DRAIN_BODY_FOR_AUTH_RESTART, rv);
break;
default:
NOTREACHED() << "bad state";
rv = ERR_FAILED;
break;
}
} while (rv != ERR_IO_PENDING && next_state_ != STATE_NONE);
return rv;
}
接下来我们逐个地分析这些步骤。
Stream的创建
DoNotifyBeforeCreateStream()执行before_network_start_callback：
int HttpNetworkTransaction::DoNotifyBeforeCreateStream() {
next_state_ = STATE_CREATE_STREAM;
bool defer = false;
if (!before_network_start_callback_.is_null())
before_network_start_callback_.Run(&defer);
if (!defer)
return OK;
return ERR_IO_PENDING;
}
在DoCreateStream()中创建Stream：
int HttpNetworkTransaction::DoCreateStream() {
// TODO(mmenke): Remove ScopedTracker below once crbug.com/424359 is fixed.
tracked_objects::ScopedTracker tracking_profile(
FROM_HERE_WITH_EXPLICIT_FUNCTION(
"424359 HttpNetworkTransaction::DoCreateStream"));
response_.network_accessed = true;
next_state_ = STATE_CREATE_STREAM_COMPLETE;
if (ForWebSocketHandshake()) {
stream_request_.reset(
session_->http_stream_factory_for_websocket()
->RequestWebSocketHandshakeStream(
*request_,
priority_,
server_ssl_config_,
proxy_ssl_config_,
this,
websocket_handshake_stream_base_create_helper_,
net_log_));
} else {
stream_request_.reset(
session_->http_stream_factory()->RequestStream(
*request_,
priority_,
server_ssl_config_,
proxy_ssl_config_,
this,
net_log_));
}
DCHECK(stream_request_.get());
return ERR_IO_PENDING;
}
......
bool HttpNetworkTransaction::ForWebSocketHandshake() const {
return websocket_handshake_stream_base_create_helper_ &&
request_->url.SchemeIsWSOrWSS();
}
当请求是一个Websocket请求时，通过HttpNetworkSession的http_stream_factory_for_websocket创建Stream，而其他情况下，则会通过HttpNetworkSession的http_stream_factory创建Stream。
由HttpNetworkSession的创建过程 (chromium_android/src/net/http/http_network_session.cc) 可以看到，http_stream_factory_for_websocket和http_stream_factory都是HttpStreamFactoryImpl：
http_stream_factory_(new HttpStreamFactoryImpl(this, false)),
http_stream_factory_for_websocket_(new HttpStreamFactoryImpl(this, true)),
为Websocket之外的其它请求创建Stream的过程 (chromium_android/src/net/http/http_stream_factory_impl.cc) 为：
HttpStreamFactoryImpl::HttpStreamFactoryImpl(HttpNetworkSession* session,
bool for_websockets)
: session_(session),
job_factory_(new DefaultJobFactory()),
for_websockets_(for_websockets) {}
HttpStreamRequest* HttpStreamFactoryImpl::RequestStream(
const HttpRequestInfo& request_info,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config,
HttpStreamRequest::Delegate* delegate,
const BoundNetLog& net_log) {
DCHECK(!for_websockets_);
return RequestStreamInternal(request_info, priority, server_ssl_config,
proxy_ssl_config, delegate, nullptr,
HttpStreamRequest::HTTP_STREAM, net_log);
}
......
HttpStreamRequest* HttpStreamFactoryImpl::RequestStreamInternal(
const HttpRequestInfo& request_info,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config,
HttpStreamRequest::Delegate* delegate,
WebSocketHandshakeStreamBase::CreateHelper*
websocket_handshake_stream_create_helper,
HttpStreamRequest::StreamType stream_type,
const BoundNetLog& net_log) {
JobController* job_controller =
new JobController(this, delegate, session_, job_factory_.get());
job_controller_set_.insert(base::WrapUnique(job_controller));
Request* request = job_controller->Start(
request_info, delegate, websocket_handshake_stream_create_helper, net_log,
stream_type, priority, server_ssl_config, proxy_ssl_config);
return request;
}
在HttpStreamFactoryImpl::RequestStreamInternal()中，主要是创建了一个JobController，然后用job_controller->Start()创建了Request，也就是HttpStreamRequest。
由HttpStreamFactoryImpl的构造函数可以看到，job_factory_是DefaultJobFactory，这个类的实现也相当简单(chromium_android/src/net/http/http_stream_factory_impl.cc) ：
namespace {
// Default JobFactory for creating HttpStreamFactoryImpl::Jobs.
class DefaultJobFactory : public HttpStreamFactoryImpl::JobFactory {
public:
DefaultJobFactory() {}
~DefaultJobFactory() override {}
HttpStreamFactoryImpl::Job* CreateJob(
HttpStreamFactoryImpl::Job::Delegate* delegate,
HttpStreamFactoryImpl::JobType job_type,
HttpNetworkSession* session,
const HttpRequestInfo& request_info,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config,
HostPortPair destination,
GURL origin_url,
NetLog* net_log) override {
return new HttpStreamFactoryImpl::Job(
delegate, job_type, session, request_info, priority, server_ssl_config,
proxy_ssl_config, destination, origin_url, net_log);
}
HttpStreamFactoryImpl::Job* CreateJob(
HttpStreamFactoryImpl::Job::Delegate* delegate,
HttpStreamFactoryImpl::JobType job_type,
HttpNetworkSession* session,
const HttpRequestInfo& request_info,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config,
HostPortPair destination,
GURL origin_url,
AlternativeService alternative_service,
NetLog* net_log) override {
return new HttpStreamFactoryImpl::Job(
delegate, job_type, session, request_info, priority, server_ssl_config,
proxy_ssl_config, destination, origin_url, alternative_service,
net_log);
}
};
} // anonymous namespace
JobController的Start()定义 (chromium_android/src/net/http/http_stream_factory_impl_job_controller.cc) 如下：
HttpStreamFactoryImpl::Request* HttpStreamFactoryImpl::JobController::Start(
const HttpRequestInfo& request_info,
HttpStreamRequest::Delegate* delegate,
WebSocketHandshakeStreamBase::CreateHelper*
websocket_handshake_stream_create_helper,
const BoundNetLog& net_log,
HttpStreamRequest::StreamType stream_type,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config) {
DCHECK(factory_);
DCHECK(!request_);
request_ = new Request(request_info.url, this, delegate,
websocket_handshake_stream_create_helper, net_log,
stream_type);
CreateJobs(request_info, priority, server_ssl_config, proxy_ssl_config,
delegate, stream_type, net_log);
return request_;
}
在这里主要是创建了一个Request，然后调用CreateJobs()创建了一些Jobs：
void HttpStreamFactoryImpl::JobController::CreateJobs(
const HttpRequestInfo& request_info,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config,
HttpStreamRequest::Delegate* delegate,
HttpStreamRequest::StreamType stream_type,
const BoundNetLog& net_log) {
DCHECK(!main_job_);
DCHECK(!alternative_job_);
HostPortPair destination(HostPortPair::FromURL(request_info.url));
GURL origin_url = ApplyHostMappingRules(request_info.url, &destination);
main_job_.reset(job_factory_->CreateJob(
this, MAIN, session_, request_info, priority, server_ssl_config,
proxy_ssl_config, destination, origin_url, net_log.net_log()));
AttachJob(main_job_.get());
// Create an alternative job if alternative service is set up for this domain.
const AlternativeService alternative_service =
GetAlternativeServiceFor(request_info, delegate, stream_type);
if (alternative_service.protocol != UNINITIALIZED_ALTERNATE_PROTOCOL) {
// Never share connection with other jobs for FTP requests.
DVLOG(1) << "Selected alternative service (host: "
<< alternative_service.host_port_pair().host()
<< " port: " << alternative_service.host_port_pair().port() << ")";
DCHECK(!request_info.url.SchemeIs("ftp"));
HostPortPair alternative_destination(alternative_service.host_port_pair());
ignore_result(
ApplyHostMappingRules(request_info.url, &alternative_destination));
alternative_job_.reset(job_factory_->CreateJob(
this, ALTERNATIVE, session_, request_info, priority, server_ssl_config,
proxy_ssl_config, alternative_destination, origin_url,
alternative_service, net_log.net_log()));
AttachJob(alternative_job_.get());
main_job_is_blocked_ = true;
alternative_job_->Start(request_->stream_type());
}
// Even if |alternative_job| has already finished, it will not have notified
// the request yet, since we defer that to the next iteration of the
// MessageLoop, so starting |main_job_| is always safe.
main_job_->Start(request_->stream_type());
}
......
GURL HttpStreamFactoryImpl::JobController::ApplyHostMappingRules(
const GURL& url,
HostPortPair* endpoint) {
const HostMappingRules* mapping_rules = session_->params().host_mapping_rules;
if (mapping_rules && mapping_rules->RewriteHost(endpoint)) {
url::Replacements replacements;
const std::string port_str = base::UintToString(endpoint->port());
replacements.SetPort(port_str.c_str(), url::Component(0, port_str.size()));
replacements.SetHost(endpoint->host().c_str(),
url::Component(0, endpoint->host().size()));
return url.ReplaceComponents(replacements);
}
return url;
}
这里的过程如下：
- 应用主机映射规则，对url做修饰。
- 通过job_factory创建main_job。
- 查找备选服务。
- 找到了备选服务，则创建alternative_job，并Start它。
- Start main_job。
我们前面提到的一些Jobs主要是指main_job，和可能会创建的alternative_job。
接着我们来看Job的Start()方法(chromium_android/src/net/http/http_stream_factory_impl_job.cc) ：
void HttpStreamFactoryImpl::Job::Start(
HttpStreamRequest::StreamType stream_type) {
stream_type_ = stream_type;
StartInternal();
}
.......
int HttpStreamFactoryImpl::Job::RunLoop(int result) {
TRACE_EVENT0(TRACE_DISABLED_BY_DEFAULT("net"),
"HttpStreamFactoryImpl::Job::RunLoop");
LOG(INFO) << "HttpStreamFactoryImpl Job DoLoop start " << "job type " << job_type_;
result = DoLoop(result);
LOG(INFO) << "HttpStreamFactoryImpl Job DoLoop end " << "result " << result;
if (result == ERR_IO_PENDING)
return result;
if (job_type_ == PRECONNECT) {
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE,
base::Bind(&HttpStreamFactoryImpl::Job::OnPreconnectsComplete,
ptr_factory_.GetWeakPtr()));
return ERR_IO_PENDING;
}
if (IsCertificateError(result)) {
// Retrieve SSL information from the socket.
GetSSLInfo();
next_state_ = STATE_WAITING_USER_ACTION;
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE,
base::Bind(&HttpStreamFactoryImpl::Job::OnCertificateErrorCallback,
ptr_factory_.GetWeakPtr(), result, ssl_info_));
return ERR_IO_PENDING;
}
switch (result) {
case ERR_PROXY_AUTH_REQUESTED: {
UMA_HISTOGRAM_BOOLEAN("Net.ProxyAuthRequested.HasConnection",
connection_.get() != NULL);
if (!connection_.get())
return ERR_PROXY_AUTH_REQUESTED_WITH_NO_CONNECTION;
CHECK(connection_->socket());
CHECK(establishing_tunnel_);
next_state_ = STATE_WAITING_USER_ACTION;
ProxyClientSocket* proxy_socket =
static_cast(connection_->socket());
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE,
base::Bind(&Job::OnNeedsProxyAuthCallback, ptr_factory_.GetWeakPtr(),
*proxy_socket->GetConnectResponseInfo(),
base::RetainedRef(proxy_socket->GetAuthController())));
return ERR_IO_PENDING;
}
case ERR_SSL_CLIENT_AUTH_CERT_NEEDED:
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE,
base::Bind(
&Job::OnNeedsClientAuthCallback, ptr_factory_.GetWeakPtr(),
base::RetainedRef(
connection_->ssl_error_response_info().cert_request_info)));
return ERR_IO_PENDING;
case ERR_HTTPS_PROXY_TUNNEL_RESPONSE: {
DCHECK(connection_.get());
DCHECK(connection_->socket());
DCHECK(establishing_tunnel_);
ProxyClientSocket* proxy_socket =
static_cast(connection_->socket());
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE, base::Bind(&Job::OnHttpsProxyTunnelResponseCallback,
ptr_factory_.GetWeakPtr(),
*proxy_socket->GetConnectResponseInfo(),
proxy_socket->CreateConnectResponseStream()));
return ERR_IO_PENDING;
}
case OK:
job_status_ = STATUS_SUCCEEDED;
MaybeMarkAlternativeServiceBroken();
next_state_ = STATE_DONE;
if (new_spdy_session_.get()) {
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE, base::Bind(&Job::OnNewSpdySessionReadyCallback,
ptr_factory_.GetWeakPtr()));
} else if (delegate_->for_websockets()) {
DCHECK(websocket_stream_);
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE, base::Bind(&Job::OnWebSocketHandshakeStreamReadyCallback,
ptr_factory_.GetWeakPtr()));
} else if (stream_type_ == HttpStreamRequest::BIDIRECTIONAL_STREAM) {
if (!bidirectional_stream_impl_) {
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE, base::Bind(&Job::OnStreamFailedCallback,
ptr_factory_.GetWeakPtr(), ERR_FAILED));
} else {
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE,
base::Bind(&Job::OnBidirectionalStreamImplReadyCallback,
ptr_factory_.GetWeakPtr()));
}
} else {
DCHECK(stream_.get());
job_stream_ready_start_time_ = base::TimeTicks::Now();
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE,
base::Bind(&Job::OnStreamReadyCallback, ptr_factory_.GetWeakPtr()));
}
return ERR_IO_PENDING;
default:
if (job_status_ != STATUS_BROKEN) {
DCHECK_EQ(STATUS_RUNNING, job_status_);
job_status_ = STATUS_FAILED;
MaybeMarkAlternativeServiceBroken();
}
base::ThreadTaskRunnerHandle::Get()->PostTask(
FROM_HERE, base::Bind(&Job::OnStreamFailedCallback,
ptr_factory_.GetWeakPtr(), result));
return ERR_IO_PENDING;
}
}
......
int HttpStreamFactoryImpl::Job::StartInternal() {
CHECK_EQ(STATE_NONE, next_state_);
next_state_ = STATE_START;
int rv = RunLoop(OK);
DCHECK_EQ(ERR_IO_PENDING, rv);
return rv;
}
执行调用流程大体如下：
HttpStreamFactoryImpl_Job
在HttpStreamFactoryImpl::Job::RunLoop()中，主要是调用了HttpStreamFactoryImpl::Job::DoLoop()，并针对其执行结果，调用响应的回调函数，如：
void HttpStreamFactoryImpl::Job::OnStreamFailedCallback(int result) {
DCHECK_NE(job_type_, PRECONNECT);
MaybeCopyConnectionAttemptsFromSocketOrHandle();
delegate_->OnStreamFailed(this, result, server_ssl_config_);
// |this| may be deleted after this call.
}
void HttpStreamFactoryImpl::Job::OnCertificateErrorCallback(
int result, const SSLInfo& ssl_info) {
DCHECK_NE(job_type_, PRECONNECT);
MaybeCopyConnectionAttemptsFromSocketOrHandle();
delegate_->OnCertificateError(this, result, server_ssl_config_, ssl_info);
// |this| may be deleted after this call.
}
从前面的HttpStreamFactoryImpl::JobController::CreateJobs()中可以看到，delegate_正是HttpStreamFactoryImpl::JobController。
而在HttpStreamFactoryImpl::Job::DoLoop()中，则是处理Stream建立的事情。与HttpNetworkTransaction的 Start() 执行的DoLoop()类似，HttpStreamFactoryImpl::Job::DoLoop()也是将Stream创建的过程抽象为一系列的步骤，通过一个循环，以一种类似于状态机模式的方式逐步骤执行：
int HttpStreamFactoryImpl::Job::DoLoop(int result) {
DCHECK_NE(next_state_, STATE_NONE);
int rv = result;
do {
State state = next_state_;
next_state_ = STATE_NONE;
switch (state) {
case STATE_START:
DCHECK_EQ(OK, rv);
rv = DoStart();
break;
case STATE_RESOLVE_PROXY:
DCHECK_EQ(OK, rv);
rv = DoResolveProxy();
break;
case STATE_RESOLVE_PROXY_COMPLETE:
rv = DoResolveProxyComplete(rv);
break;
case STATE_WAIT:
DCHECK_EQ(OK, rv);
rv = DoWait();
break;
case STATE_WAIT_COMPLETE:
rv = DoWaitComplete(rv);
break;
case STATE_INIT_CONNECTION:
DCHECK_EQ(OK, rv);
rv = DoInitConnection();
break;
case STATE_INIT_CONNECTION_COMPLETE:
rv = DoInitConnectionComplete(rv);
break;
case STATE_WAITING_USER_ACTION:
rv = DoWaitingUserAction(rv);
break;
case STATE_RESTART_TUNNEL_AUTH:
DCHECK_EQ(OK, rv);
rv = DoRestartTunnelAuth();
break;
case STATE_RESTART_TUNNEL_AUTH_COMPLETE:
rv = DoRestartTunnelAuthComplete(rv);
break;
case STATE_CREATE_STREAM:
DCHECK_EQ(OK, rv);
rv = DoCreateStream();
break;
case STATE_CREATE_STREAM_COMPLETE:
rv = DoCreateStreamComplete(rv);
break;
default:
NOTREACHED() << "bad state";
rv = ERR_FAILED;
break;
}
} while (rv != ERR_IO_PENDING && next_state_ != STATE_NONE);
return rv;
}
以执行一个QUIC请求为例，创建Stream的整个执行流程大体如下：
CreateStream
备选服务机制
在HttpStreamFactoryImpl::JobController的CreateJobs()中我们看到，在通过job_factory创建main_job之后，会查找备选服务，在找到了备选服务时，还会为它创建job，并Start。那备选服务又是一套什么样的机制呢？
我们从两个方面来探究这套机制究竟是什么样的，及它又被用来做什么，一是备选服务的信息是从哪里及如何获取的，二是备选服务对HttpStreamFactoryImpl::Job::Job的操作的影响。
获取备选服务信息
我们先来看备选服务信息的获取。在HttpStreamFactoryImpl::JobController的CreateJobs()中，通过GetAlternativeServiceFor()来获取备选服务的信息：
AlternativeService
HttpStreamFactoryImpl::JobController::GetAlternativeServiceFor(
const HttpRequestInfo& request_info,
HttpStreamRequest::Delegate* delegate,
HttpStreamRequest::StreamType stream_type) {
AlternativeService alternative_service =
GetAlternativeServiceForInternal(request_info, delegate, stream_type);
AlternativeServiceType type;
if (alternative_service.protocol == UNINITIALIZED_ALTERNATE_PROTOCOL) {
type = NO_ALTERNATIVE_SERVICE;
} else if (alternative_service.protocol == QUIC) {
if (request_info.url.host() == alternative_service.host) {
type = QUIC_SAME_DESTINATION;
} else {
type = QUIC_DIFFERENT_DESTINATION;
}
} else {
if (request_info.url.host() == alternative_service.host) {
type = NOT_QUIC_SAME_DESTINATION;
} else {
type = NOT_QUIC_DIFFERENT_DESTINATION;
}
}
UMA_HISTOGRAM_ENUMERATION("Net.AlternativeServiceTypeForRequest", type,
MAX_ALTERNATIVE_SERVICE_TYPE);
return alternative_service;
}
这里主要通过GetAlternativeServiceForInternal()获取备选服务的信息：
AlternativeService
HttpStreamFactoryImpl::JobController::GetAlternativeServiceForInternal(
const HttpRequestInfo& request_info,
HttpStreamRequest::Delegate* delegate,
HttpStreamRequest::StreamType stream_type) {
GURL original_url = request_info.url;
if (!original_url.SchemeIs("https"))
return AlternativeService();
url::SchemeHostPort origin(original_url);
HttpServerProperties& http_server_properties =
*session_->http_server_properties();
const AlternativeServiceVector alternative_service_vector =
http_server_properties.GetAlternativeServices(origin);
if (alternative_service_vector.empty())
return AlternativeService();
bool quic_advertised = false;
bool quic_all_broken = true;
// First Alt-Svc that is not marked as broken.
AlternativeService first_alternative_service;
for (const AlternativeService& alternative_service :
alternative_service_vector) {
DCHECK(IsAlternateProtocolValid(alternative_service.protocol));
if (!quic_advertised && alternative_service.protocol == QUIC)
quic_advertised = true;
if (http_server_properties.IsAlternativeServiceBroken(
alternative_service)) {
HistogramAlternateProtocolUsage(ALTERNATE_PROTOCOL_USAGE_BROKEN);
continue;
}
// Some shared unix systems may have user home directories (like
// http://foo.com/~mike) which allow users to emit headers. This is a bad
// idea already, but with Alternate-Protocol, it provides the ability for a
// single user on a multi-user system to hijack the alternate protocol.
// These systems also enforce ports <1024 as restricted ports. So don't
// allow protocol upgrades to user-controllable ports.
const int kUnrestrictedPort = 1024;
if (!session_->params().enable_user_alternate_protocol_ports &&
(alternative_service.port >= kUnrestrictedPort &&
origin.port() < kUnrestrictedPort))
continue;
if (alternative_service.protocol >= NPN_SPDY_MINIMUM_VERSION &&
alternative_service.protocol <= NPN_SPDY_MAXIMUM_VERSION) {
if (origin.host() != alternative_service.host &&
!session_->params()
.enable_http2_alternative_service_with_different_host) {
continue;
}
// Cache this entry if we don't have a non-broken Alt-Svc yet.
if (first_alternative_service.protocol ==
UNINITIALIZED_ALTERNATE_PROTOCOL)
first_alternative_service = alternative_service;
continue;
}
DCHECK_EQ(QUIC, alternative_service.protocol);
if (origin.host() != alternative_service.host &&
!session_->params()
.enable_quic_alternative_service_with_different_host) {
continue;
}
quic_all_broken = false;
if (!session_->params().enable_quic)
continue;
if (!IsQuicWhitelistedForHost(origin.host()))
continue;
if (stream_type == HttpStreamRequest::BIDIRECTIONAL_STREAM &&
session_->params().quic_disable_bidirectional_streams) {
continue;
}
if (session_->quic_stream_factory()->IsQuicDisabled(
alternative_service.port))
continue;
if (!original_url.SchemeIs("https"))
continue;
// Check whether there is an existing QUIC session to use for this origin.
HostPortPair mapped_origin(origin.host(), origin.port());
ignore_result(ApplyHostMappingRules(original_url, &mapped_origin));
QuicServerId server_id(mapped_origin, request_info.privacy_mode);
HostPortPair destination(alternative_service.host_port_pair());
ignore_result(ApplyHostMappingRules(original_url, &destination));
if (session_->quic_stream_factory()->CanUseExistingSession(server_id,
destination)) {
return alternative_service;
}
// Cache this entry if we don't have a non-broken Alt-Svc yet.
if (first_alternative_service.protocol == UNINITIALIZED_ALTERNATE_PROTOCOL)
first_alternative_service = alternative_service;
}
// Ask delegate to mark QUIC as broken for the origin.
if (quic_advertised && quic_all_broken && delegate != nullptr)
delegate->OnQuicBroken();
return first_alternative_service;
}
这个函数的执行流程如下：
- 检查Url的scheme是否为https，若不是，直接返回空的AlternativeService。即备选服务只用于https。
- 从session_获取HttpServerProperties http_server_properties。
- 从http_server_properties获取所有的备选服务信息。
- 遍历上一步找到的备选服务，找到一个可用的。
在Chromium net中，以https为scheme的请求有多种，一是常规的HTTP/1.1 + TLS的请求，二是SPDY/HTTP2请求，三是QUIC协议的请求。备选服务主要用于后两种协议的请求。这里会根据同源策略、端口、协议是否打开及主机是否在白名单等判断一个备选服务是否可用。
我们可以看到，备选服务的所有信息，都来源于http_server_properties。http_server_properties来源于HttpNetworkSession。HttpNetworkSession的http_server_properties在URLRequestContextBuilder::Build()中创建：
void URLRequestContextBuilder::SetHttpNetworkSessionComponents(
const URLRequestContext* context,
HttpNetworkSession::Params* params) {
params->host_resolver = context->host_resolver();
params->cert_verifier = context->cert_verifier();
params->transport_security_state = context->transport_security_state();
params->cert_transparency_verifier = context->cert_transparency_verifier();
params->ct_policy_enforcer = context->ct_policy_enforcer();
params->proxy_service = context->proxy_service();
params->ssl_config_service = context->ssl_config_service();
params->http_auth_handler_factory = context->http_auth_handler_factory();
params->http_server_properties = context->http_server_properties();
params->net_log = context->net_log();
params->channel_id_service = context->channel_id_service();
}
std::unique_ptr URLRequestContextBuilder::Build() {
......
if (http_server_properties_) {
storage->set_http_server_properties(std::move(http_server_properties_));
} else {
storage->set_http_server_properties(
std::unique_ptr(new HttpServerPropertiesImpl()));
}
......
storage->set_http_network_session(
base::WrapUnique(new HttpNetworkSession(network_session_params)));
Cronet库的初始化过程中，会执行CronetURLRequestContextAdapter::InitializeOnNetworkThread()，在这个方法中，通过URLRequestContextBuilder构建了URLRequestContext之后，会向其中添加备选服务的信息：
void CronetURLRequestContextAdapter::InitializeOnNetworkThread(
std::unique_ptr config,
const base::android::ScopedJavaGlobalRef&
jcronet_url_request_context) {
......
if (config->enable_quic) {
for (auto hint = config->quic_hints.begin();
hint != config->quic_hints.end(); ++hint) {
const URLRequestContextConfig::QuicHint& quic_hint = **hint;
if (quic_hint.host.empty()) {
LOG(ERROR) << "Empty QUIC hint host: " << quic_hint.host;
continue;
}
url::CanonHostInfo host_info;
std::string canon_host(net::CanonicalizeHost(quic_hint.host, &host_info));
if (!host_info.IsIPAddress() &&
!net::IsCanonicalizedHostCompliant(canon_host)) {
LOG(ERROR) << "Invalid QUIC hint host: " << quic_hint.host;
continue;
}
if (quic_hint.port <= std::numeric_limits::min() ||
quic_hint.port > std::numeric_limits::max()) {
LOG(ERROR) << "Invalid QUIC hint port: "
<< quic_hint.port;
continue;
}
if (quic_hint.alternate_port <= std::numeric_limits::min() ||
quic_hint.alternate_port > std::numeric_limits::max()) {
LOG(ERROR) << "Invalid QUIC hint alternate port: "
<< quic_hint.alternate_port;
continue;
}
url::SchemeHostPort quic_server("https", canon_host, quic_hint.port);
net::AlternativeService alternative_service(
net::AlternateProtocol::QUIC, "",
static_cast(quic_hint.alternate_port));
context_->http_server_properties()->SetAlternativeService(
quic_server, alternative_service, base::Time::Max());
}
}
这里更是限定了只允许给QUIC协议添加备选服务。而这里添加的备选服务的信息都来自于URLRequestContextConfig。
继续来看给HttpServerProperties添加备选服务信息的过程 (chromium_android/src/net/http/http_server_properties_impl.cc)：
bool HttpServerPropertiesImpl::SetAlternativeService(
const url::SchemeHostPort& origin,
const AlternativeService& alternative_service,
base::Time expiration) {
return SetAlternativeServices(
origin,
AlternativeServiceInfoVector(
/*size=*/1, AlternativeServiceInfo(alternative_service, expiration)));
}
bool HttpServerPropertiesImpl::SetAlternativeServices(
const url::SchemeHostPort& origin,
const AlternativeServiceInfoVector& alternative_service_info_vector) {
AlternativeServiceMap::iterator it = alternative_service_map_.Peek(origin);
if (alternative_service_info_vector.empty()) {
RemoveCanonicalHost(origin);
if (it == alternative_service_map_.end())
return false;
alternative_service_map_.Erase(it);
return true;
}
bool changed = true;
if (it != alternative_service_map_.end()) {
DCHECK(!it->second.empty());
if (it->second.size() == alternative_service_info_vector.size()) {
const base::Time now = base::Time::Now();
changed = false;
auto new_it = alternative_service_info_vector.begin();
for (const auto& old : it->second) {
// Persist to disk immediately if new entry has different scheme, host,
// or port.
if (old.alternative_service != new_it->alternative_service) {
changed = true;
break;
}
// Also persist to disk if new expiration it more that twice as far or
// less than half as far in the future.
base::Time old_time = old.expiration;
base::Time new_time = new_it->expiration;
if (new_time - now > 2 * (old_time - now) ||
2 * (new_time - now) < (old_time - now)) {
changed = true;
break;
}
++new_it;
}
}
}
const bool previously_no_alternative_services =
(GetAlternateProtocolIterator(origin) == alternative_service_map_.end());
alternative_service_map_.Put(origin, alternative_service_info_vector);
if (previously_no_alternative_services &&
!GetAlternativeServices(origin).empty()) {
// TODO(rch): Consider the case where multiple requests are started
// before the first completes. In this case, only one of the jobs
// would reach this code, whereas all of them should should have.
HistogramAlternateProtocolUsage(ALTERNATE_PROTOCOL_USAGE_MAPPING_MISSING);
}
// If this host ends with a canonical suffix, then set it as the
// canonical host.
const char* kCanonicalScheme = "https";
if (origin.scheme() == kCanonicalScheme) {
const std::string* canonical_suffix = GetCanonicalSuffix(origin.host());
if (canonical_suffix != nullptr) {
url::SchemeHostPort canonical_server(kCanonicalScheme, *canonical_suffix,
origin.port());
canonical_host_to_origin_map_[canonical_server] = origin;
}
}
return changed;
}
HttpServerPropertiesImpl用一个Map来管理备选服务的信息，key为原始服务的scheme+host+port，用url::SchemeHostPort来表示，而value则为AlternativeServiceInfoVector，即备选服务信息的列表。
用户添加备选服务信息
在CronetEngine.Builder中 (chromium_android/src/components/cronet/android/api/src/org/chromium/net/CronetEngine.java)，提供了接口，来添加QUIC服务器的一些信息：
public abstract class CronetEngine {
/**
* A builder for {@link CronetEngine}s, which allows runtime configuration of
* {@code CronetEngine}. Configuration options are set on the builder and
* then {@link #build} is called to create the {@code CronetEngine}.
*/
public static class Builder {
......
/**
* A hint that a host supports QUIC.
* @hide only used by internal implementation.
*/
public static class QuicHint {
// The host.
public final String mHost;
// Port of the server that supports QUIC.
public final int mPort;
// Alternate protocol port.
public final int mAlternatePort;
QuicHint(String host, int port, int alternatePort) {
mHost = host;
mPort = port;
mAlternatePort = alternatePort;
}
}
......
/**
* Adds hint that {@code host} supports QUIC.
* Note that {@link #enableHttpCache enableHttpCache}
* ({@link #HTTP_CACHE_DISK}) is needed to take advantage of 0-RTT
* connection establishment between sessions.
*
* @param host hostname of the server that supports QUIC.
* @param port host of the server that supports QUIC.
* @param alternatePort alternate port to use for QUIC.
* @return the builder to facilitate chaining.
*/
public Builder addQuicHint(String host, int port, int alternatePort) {
if (host.contains("/")) {
throw new IllegalArgumentException("Illegal QUIC Hint Host: " + host);
}
mQuicHints.add(new QuicHint(host, port, alternatePort));
return this;
}
/**
* @hide only used by internal implementation.
*/
public List quicHints() {
return mQuicHints;
}
在CronetUrlRequestContext创建中，创建native UrlRequestContextConfig时会将所有的QUIC hint信息传递给native层。
@VisibleForTesting
public static long createNativeUrlRequestContextConfig(
final Context context, CronetEngine.Builder builder) {
final long urlRequestContextConfig = nativeCreateRequestContextConfig(
builder.getUserAgent(), builder.storagePath(), builder.quicEnabled(),
builder.getDefaultQuicUserAgentId(context), builder.http2Enabled(),
builder.sdchEnabled(), builder.dataReductionProxyKey(),
builder.dataReductionProxyPrimaryProxy(), builder.dataReductionProxyFallbackProxy(),
builder.dataReductionProxySecureProxyCheckUrl(), builder.cacheDisabled(),
builder.httpCacheMode(), builder.httpCacheMaxSize(), builder.experimentalOptions(),
builder.mockCertVerifier(), builder.networkQualityEstimatorEnabled(),
builder.publicKeyPinningBypassForLocalTrustAnchorsEnabled(),
builder.certVerifierData());
for (Builder.QuicHint quicHint : builder.quicHints()) {
nativeAddQuicHint(urlRequestContextConfig, quicHint.mHost, quicHint.mPort,
quicHint.mAlternatePort);
}
for (Builder.Pkp pkp : builder.publicKeyPins()) {
nativeAddPkp(urlRequestContextConfig, pkp.mHost, pkp.mHashes, pkp.mIncludeSubdomains,
pkp.mExpirationDate.getTime());
}
return urlRequestContextConfig;
}
nativeAddQuicHint()在chromium_android/src/components/cronet/android/cronet_url_request_context_adapter.cc中定义：
// Add a QUIC hint to a URLRequestContextConfig.
static void AddQuicHint(JNIEnv* env,
const JavaParamRef& jcaller,
jlong jurl_request_context_config,
const JavaParamRef& jhost,
jint jport,
jint jalternate_port) {
URLRequestContextConfig* config =
reinterpret_cast(jurl_request_context_config);
config->quic_hints.push_back(
base::WrapUnique(new URLRequestContextConfig::QuicHint(
base::android::ConvertJavaStringToUTF8(env, jhost), jport,
jalternate_port)));
}
备选服务对HttpStreamFactoryImpl::Job::Job的操作的影响
为备选服务和为常规服务会以略有不同的方式创建Job：
HttpStreamFactoryImpl::Job::Job(Delegate* delegate,
JobType job_type,
HttpNetworkSession* session,
const HttpRequestInfo& request_info,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config,
HostPortPair destination,
GURL origin_url,
NetLog* net_log)
: Job(delegate,
job_type,
session,
request_info,
priority,
server_ssl_config,
proxy_ssl_config,
destination,
origin_url,
AlternativeService(),
net_log) {}
HttpStreamFactoryImpl::Job::Job(Delegate* delegate,
JobType job_type,
HttpNetworkSession* session,
const HttpRequestInfo& request_info,
RequestPriority priority,
const SSLConfig& server_ssl_config,
const SSLConfig& proxy_ssl_config,
HostPortPair destination,
GURL origin_url,
AlternativeService alternative_service,
NetLog* net_log)
: request_info_(request_info),
priority_(priority),
server_ssl_config_(server_ssl_config),
proxy_ssl_config_(proxy_ssl_config),
net_log_(BoundNetLog::Make(net_log, NetLog::SOURCE_HTTP_STREAM_JOB)),
io_callback_(base::Bind(&Job::OnIOComplete, base::Unretained(this))),
connection_(new ClientSocketHandle),
session_(session),
next_state_(STATE_NONE),
pac_request_(NULL),
destination_(destination),
origin_url_(origin_url),
alternative_service_(alternative_service),
delegate_(delegate),
job_type_(job_type),
using_ssl_(false),
using_spdy_(false),
using_quic_(false),
quic_request_(session_->quic_stream_factory()),
using_existing_quic_session_(false),
spdy_certificate_error_(OK),
establishing_tunnel_(false),
was_npn_negotiated_(false),
protocol_negotiated_(kProtoUnknown),
num_streams_(0),
spdy_session_direct_(false),
job_status_(STATUS_RUNNING),
other_job_status_(STATUS_RUNNING),
stream_type_(HttpStreamRequest::BIDIRECTIONAL_STREAM),
ptr_factory_(this) {
DCHECK(session);
if (IsSpdyAlternative()) {
DCHECK(origin_url_.SchemeIs("https"));
}
if (IsQuicAlternative()) {
DCHECK(session_->params().enable_quic);
using_quic_ = true;
}
}
......
bool HttpStreamFactoryImpl::Job::IsQuicAlternative() const {
return alternative_service_.protocol == QUIC;
}
为QUIC备选服务创建的Job，在创建时期，就会将using_quic_置为true。这个标记的设置将对后续创建Stream的过程产生决定性的影响。
总结一下，备选服务机制像是一种过渡方案，用于在协议开发早期，还没有确定协议协商机制的情况下。在chromium net中，scheme为https的请求所用的协议有可能是HTTP/1.1+TLS、HTTP2和QUIC这三种的任一种，其中前两种都是基于TCP的，而QUIC是基于UDP的。当前前面的两种协议已经有了NPN和ALPN这样的协议协商的机制，而传给chromium net一个scheme为https的QUIC请求的URL，它也是不知道要用QUIC协议来做请求的。而备选服务机制，则允许chromium net的用户指定，对某些主机的访问采用特定的协议进行。此外，在HttpStreamFactoryImpl::JobController的CreateJobs()中，在为备选服务创建Job之外，还是会创建main_job，即是说，传给chromium net一个以https为scheme的Url，它一定会尝试用TCP的方式建立连接的，只是对于请求QUIC协议的服务，这个连接将会失败，而真正取回数据的将是alternative_job。