shengzhuzhu
shengzhuzhu

CVI 常见错误

http://www.ni.com/white-paper/11436/en/

.NET and ActiveX
165495 — Installing an application that uses ActiveX controls to a clean machine might result in a runtime error.
174102 — Hidden LabWindows/CVI ActiveX Automation interface is visible in function panel tree
204719 — Wrappers generated for the Microsoft.JScript .NET assembly will not compile.
217093 — LabWindows/CVI .NET components do not get installed if .NET 2.0 is installed.
119213 — An exception can occur when inserting an image into a report created with WordReport.fp
44669 4HK7LF7K — The WordRpt_SetHeader function might not always work as expected.
283042 — A LabWindows/CVI ActiveX server can crash while shutting down if there are open client connections to the server.
283065 — LabWindows/CVI cannot generate wrappers for .NET Framework 4.0 assemblies.
299606 — The LabWindows/CVI ActiveX Controller Wizard does not display all registered ActiveX servers.
313299 — CVI_AppGetLinesFromFile returns a string with maximum length of INT16_MAX characters.
361691 — The GetAllBreakpoints LabWindows/CVI ActiveX Server Interface function does not set numBreakpoints output parameter.
335556 — The Word Report WordRpt_GoToCell function will always go to the first column when used in a Microsoft Word 2007 file or later.
376796 — Creating an AppDomain in .NET using the mscorlib.fp library causes a System.OutOfMemoryException to be thrown.
345700 — The CA_InitActiveXThreadStyleForCurrentThread function return success even if it fails.
Analysis
140249 — NonLinearFitWithMaxIters may not return an error if performing the maximum number of iterations does not result in convergence.
140913 — ThresholdPeakDetector has unexpected results when width is greater than 1.
156791 — Several Analysis Library function panels are incorrectly relying on AnalysisLibPowerOfTwo enum.
183434 — NonLinearFitWithMaxIters function does not return the best fit array when the maximum number of interations is exceeded.
247895 — The threshold parameter in MultipleToneInfo, MultipleToneSignal, CxMultipleToneInfo, and CxMultipleToneSignal does not always work.
362123 — Gamma, GammaC, and Beta functions compute regularized form, which is not accurately described in help.
361840 — For values of x that are very large, sin (x) returns x instead of returning a number between -1 and 1.
Compiler
120676 — Even with C99 enabled, some variables cannot be declared immediately following a switch statement.
127909 — Instrument drivers are marked for compilation with each configuration switch.
128921 — Incorrect compilation of code containing multiple anonymous inner struct members.
129546 — Cannot use the Utility or Formatting and I/O Libraries and some Interface to Win32 API functions at the same time.
131800 — Too many initializers error when initializing incomplete array typedefs.
132689 — LabWindows/CVI autocomplete feature does not work for nested struct array fields.
134066 — Linking a project can fail with an Out of Memory error in very rare circumstances,
134406 — The Interface to Win32 API fails to compile with third-party compilers if C99 is enabled.
134407 — Build warnings are reported when compiling the Interface to Win32 API with third-party compilers.
135927 — ActiveX wrappers fail to compile when LabWindows/CVI uses the Borland compatibility mode.
136156 — When passing 64-bit integers to a 32-bit integer parameter in a function call, other parameters can end up with incorrect values.
138186 — Function pointers for functions without parameters require void keyword in parameter list.
139419 — Including WSPiApi.h and WS2tcpip.h can cause Interface to Win32 API compile errors.
145895 — Auto completion of structs does not handle arrays of structs inside other structs correctly.
152421 — The compiler can crash when very large arrays are initialized with small string literals.
152423 — Arrays initialized with string literals are not completely filled with zero bytes.
152425 — No error reported when arrays are initialized with string literals that are too large.
158055 — Cannot include windows.h in the Interactive Execution window.
162554 — The non-fatal runtime error "Local was referenced before being initialized" may occur incorrectly.
162814 — Cannot embed a type library in a DLL if the function panel has a custom data type.
165697 — The last initialized global or static local variable in a file may not be fully allocated.
168621 — Using an object file built with precompiled headers can lead to link errors.
169037 — Linking against mixed-mode .NET DLLs may cause LabWindows/CVI applications to crash.
177794 — LabWindows/CVI can crash when compiling a complex mathematical computation that is not assigned to a variable.
186965 — Compile.exe crashes on project with "Add type library resource to DLL" option enabled.
201360 — Incorrect usage of designated initializers (C99) may result in a hang in the LabWindows/CVI environment during compilation.
203051 — Some constant array size expressions may be incorrectly reported as variable-length in C99 mode.
206504 — Building debug versions of very large projects may cause LabWindows/CVI to run out of memory.
222105 — Using XCOPY in a build step to copy a file over an existing file can break subsequent builds.
232139 — LabWindows/CVI can recompile a source file if the timestamp of a .obj file changes, but there has been no change to the corresponding source file.
232194 — LabWindows/CVI ignores invalid symbols in macro names.
232196 — LabWindows/CVI does not consider '$' to be a valid character in a symbol identifier.
232258 — You cannot use word "defined" in a macro definition.
237998 — Cannot link some uuid.lib symbols in a 32-bit program.
240722 — Including strsafe.h causes compilation errors.
284771 — When using third-party compilers, linker errors refer to temporary object files.
275934 — Including the http.h Win32 API header file can result in missing function prototype compile errors.
276524 — compile.exe may report link errors for National Instruments libraries.
277739 — Compiling a file with a syntax error can cause LabWindows/CVI to crash.
309184 — compile.exe can crash when passed a project path that can't be found on disk.
309627 — LabWindows/CVI can crash when compiling some K&R style functions.
295246 — A source file containing a very large array of structures might fail to compile.
327730 — LabWindows/CVI crashes during compilation when a very long variable name is used.
335358 — Using the bit shift operator multiple times on the same line of code produces incorrect results for 64-bit integers in a 32-bit application.
318253 — False positive user protection error when using an Interface to Win32 API struct.
363456 — Compiler warning when using __int64 in switch statement expression in a 32-bit configuration.
359304 — The modulo operation with 64-bit integers in a 32-bit configuration may produce incorrect results.
368271 — When using an external optimizing compiler, compiler defines that are defined to strings with escaped quotations are not passed to the external compiler as strings.
404327 — LabWindows/CVI may crash when changing the default calling convention of a library after it has been built.
Debugging
127318 — Calling some inifile.fp functions while the Programmer's Toolbox is compiled from source code can result in a false report of leaked resources.
134586 — Erroneous user protection error when accessing member of a multidimensional array of structs/pointers.
137735 — The Source Code Browser does not retain all its settings when a file is recompiled.
139139 — Viewing memory as HEX longs (64-bit) in the Memory Display window causes all values to turn red.
155604 — Adding a watch expression that references a variable declared in block scope can hang the program when it is debugged.
177188 — LabWindows/CVI debugger can crash when using memcpy to copy data from a const struct array.
179034 — Obtaining a non-existent attribute with CVIXMLGetAttributeByName results in a false report of leaked resources.
184979 — Breakpoint pass counts are off by one.
189661 — Variables window does not always show a variable declared in for-loop scope.
217295 — AppendString might work incorrectly when debugging a LabWindows/CVI program.
255342 — Remote debugging can hang when debugging DLLs with DllMain.
257782 — The Resource Tracking window does not track thread local variable handles.
247337 — Watchpoints for nested structures may show incorrect values.
285461 — Attaching the LabWindows/CVI debugger to a C++ DLL might result in significant performance degradation.
255345 — TDMS_CloseFile can take a long time to complete when the LabWindows/CVI debugger is attached.
278151 — A breakpoint with a pass count and a condition will never break execution as a result of the pass count.
298184 — Non-fatal user protection errors can sometimes display only the message &%%s&.
294217 — The Edit Breakpoint dialog box incorrectly maintains a reference to old files.
37498 44K3HK07 — Variables defined inside of a block statement cannot be added to the Watch window.
326213 — The Go to Line button causes an internal assert to be triggered.
316246 — LabWindows/CVI changes foreground lock timeout to 0 when debugging.
322203 — If you change a breakpoint due to an invalid condition while you are debugging, LabWindows/CVI ignores the next breakpoint.
324351 — Canceling from the Invalid Breakpoint dialog box causes the LabWindows/CVI debugger to ignore all remaining breakpoints and continue execution.
324829 — LabWindows/CVI crashes while debugging when adding a conditional breakpoint to the Interactive Execution window if the window doesn't contain any executable code.
325547 — Error message in the Invalid Condition dialog box may overflow text region.
333287 — Cursor does not change back to arrow after operating the splitter in the Watch Window while debugging.
353320 — Attempting to edit a "??" entry in the Memory window causes an error.
358560 — Function name is not reported in Break On Library Errors message.
335983 — Tooltip for symbol values during debugging may appear on top of the editor's scrollbar.
370519 — The LabWindows/CVI environment crashes when setting a string in the Array Display window to hexadecimal format while debugging a LabWindows/CVI application.
378420 — The CNVGetFolders and CNVGetVariables functions return string arrays that show the incorrect number of elements while debugging.
Development Environment
126050 — tmpdir registry value is not used when backing up files.
127036 — LabWindows/CVI may display repeated save prompts if a project file path is made invalid.
127953 — Closing a workspace may not remove all the files associated with a workspace.
129695 — LabWindows/CVI can crash on exit after TestStand executes code modules in an external instance of LabWindows/CVI.
130204 — Multiple file search does not ignore invalid paths when searching only a specific set of files.
131218 — The Edit Item dialog box of a tree control shows an incorrect description of the image name.
133845 — Table row labels cannot be sized when the column labels are not visible and vice-versa.
134049 — User Interface Editor does not retain the awareness that it should save the .uir in an older format.
135900 — The Workspace window title bar does not show Aero transparency.
136241 — Attempting to run code in a released Interactive Execution window runs the project instead.
136293 — LabWindows/CVI can crash after removing from the workspace a project that uses a third party compiler.
140209 — Cannot change coordinates of a control label in the User Interface Editor if the control is in a tab page.
149012 — Cannot list ViInt64 attributes in function panels.
154794 — Web links in the Help menu do not work when .html files are not associated with a Web browser.
156166 — Cut Line does not work correctly with a collapsed block of code.
156975 — The User Interface Editor prompts you to assign constant names when backing up files.
157568 — Go to Next Reference does not cycle through all references of a variable or a function in other files.
162197 — Help tooltip for the Run button in the toolbar is incorrect after running the Interactive Execution window.
166027 — Launching the Icon Editor results in the error Value is invalid or out of range.
168302 — Numeric float-type function panel controls cannot be added through automation.
168426 — Using an RT target originally configured by browsing the network can result in "The target machine is not connected to the network" errors.
172750 — The LabWindows/CVI GUI Localization Utility preview does not work correctly with non-native character sets.
179291 — Labels for numeric slide controls do not redraw if the display format is set to Scientific or Engineering, and the data type is then changed to int64 or unsigned int64.
182743 — Editing a panel that has a control with a label of exactly 50 characters can cause a crash.
185942 — Cannot add empty function panel file to a project.
189843 — The Perforce 2009.1 client may cause LabWindows/CVI 2009 to crash.
193526 — Adding a watch expression that already exists fails silently.
194053 — LabWindows/CVI can display multiple prompts to check out a project file from source code control.
198012 — Dragging binary files, such as a static library, between projects may result in an exception.
201055 — Type library generation may fail if FP control names contain ODL keywords.
203337 — The DirectShow API in the full Interface to the Win32 SDK is unusable.
207820 — Modifying a menu bar font can hide elements of the Edit Menu Bar dialog box.
167925 — Showing available attributes may crash LabWindows/CVI.
172157 — Diffing two files can cause window contents to draw in the wrong window.
237395 — Dragging a file from the Open File dialog box to the LabWindows/CVI Project Tree can cause LabWindows/CVI to crash.
258505 — Selecting "Create New File" on a project folder results in an invalid file.
254788 — LabWindows/CVI doesn't remember source line position of the first file opened until a second file is opened.
256142 — Copying collapsed tree items with images in the User Interface Editor can cause LabWindows/CVI to crash.
252825 — The Variables window might flicker when debugging a DLL built using LabWindows/CVI.
253907 — If Perforce is configured with two workspaces that have different root paths, Perforce SCC integration will fail in LabWindows/CVI.
211495 — LabWindows/CVI function panel help is missing stylesheets and images in multibyte operating systems.
240876 — Adding a space to the Menu bar constant prefix in the Edit Menu Bar dialog box causes the dialog box to close without warning.
241552 — LabWindows/CVI does not support offline files in Windows Vista and Windows 7.
248824 — Using replace for a text selection may not always work.
276026 — LabWindows/CVI can generate code into the wrong source file without asking for confirmation.
283527 — LabWindows/CVI carets ignore Windows keyboard settings.
283634 — The LabWindows/CVI Visual Studio Conversion Wizard fails for some projects that reference National Instruments modular instruments drivers.
282253 — Data tooltip is too small to hold negative zero floating-point values.
289949 — Using an import library generated by MinGW results in "Bad COFF Library Member Header" error message.
289314 — User-defined types always receive an asterisk when used as output types in function panels.
299674 — Pasting unicode text into the LabWindows/CVI Source window can cause LabWindows/CVI to crash.
295507 — Undoing after hiding and showing panels can cause LabWindows/CVI to crash.
295654 — Building a project with the same name as a previously loaded project can cause LabWindows/CVI to crash.
296380 — EVENT_SORT does not appear in the User Interface Editor.
296381 — You cannot use the Edit Text Tool to edit the last cell in a table column.
294281 — Making a change to a project that is under source code control in LabWindows/CVI does not result in checking out the project.
294282 — Files added to a project cannot be added to source code control.
294650 — Undo in the User Interface Editor can change the z-plane order of controls.
294008 — New files added in the Edit Project dialog box do not use the Project Tree Font.
328823 — Toolbox.c and toolbox.h are not added to a Microsoft Visual Studio project if LabWindows/CVI is not run at least once after installation.
329035 — LabWindows/CVI Conversion Wizard does not transfer 'Compile with precompiled include file' setting to 'Precompiled Headers' setting in Microsoft Visual Studio.
331534 — The scroll bars in the User Interface Editor do not appear when changing the panel size using the cursor.
332047 — LabWindows/CVI stops responding while searching for an inaccessible network location.
311356 — Changes to the font persist in the Font dialog box when the action is canceled.
311364 — Function name displays twice in the function prototype tooltip when the return value is const or volatile.
316626 — The physdemo.cws example uses functionality that is removed with Security Update 5Q5FJ4QW.
321793 — Adding multiple files with the same name in the Edit Project dialog box can cause LabWindows/CVI to crash.
325813 — The Replace File in Project option crashes the development environment if a file with same base name is specified.
326195 — The active function panel is incorrectly detected when multiple function panels are being edited in the Function Panel Editor window.
334683 — The window number is displayed in the title bar of maximized windows when switching between tabbed and non-tabbed workspace.
332690 — The Source Window background is not painted gray when a non-tabbed workspace is opened.
333571 — Moving selected text in the Source window and then undoing offsets the original cursor position.
333983 — Non project C files loaded by function panels are not unloaded when switching projects.
334920 — Corners of Source Editor windows are painted black in non-tabbed Workspace when opened.
335301 — Disabling tabbed workspace doesn't restore windows to their original unmaximized state.
335499 — Unmaximizing windows after loading a workspace leaves inactive windows without a number in front of the title in the title bar.
361327 — The CNVGetScalarDataValue function expects a char* only and not a char[ ] as described in the function help.
361958 — The Project Tree does not auto-hide when a UIR file is opened.
354449 — Very long strings in the Edit Distributions dialog box may crash LabWindows/CVI.
347511 — Microsoft Visual Studio does not rebuild a LabWindows/CVI project if a UIR file changes but its header file does not.
347986 — The Load UI resource file dialog box in the User Interface Localizer utility unloads the currently loaded localization.
352408 — Pressing F1 on a function in the ActiveX Library or most of the Tools Libraries does not open the LabWindows/CVI Help to the topic for the specified function.
354450 — Using a very long string when setting the value of a variable in the Variables window may crash the LabWindows/CVI environment.
354451 — A very long string value in the Add/Edit Tools Menu Item dialog box may crash LabWindows/CVI.
354452 — A very long string value in the Project folder or File Folder option of the New Project from Template or New File from Template dialog boxes may crash LabWindows/CVI.
337770 — Setting LabWindows/CVI to "Run as administrator" will open a new instance of LabWindows/CVI each time you open a file associated with LabWindows/CVI.
333302 — Auto Backup will provide an error if the file is marked as read-only.
344947 — The LabWindows/CVI development environment crashes when you cut, copy, or delete a function panel tree item if it is the active item, but not selected.
352775 — Sorting an empty column in the Modules window causes an error.
315800 — The Find in files search will display a warning if a line it attempts to search is greater than 1024 characters.
333273 — Using column selection mode in the Source window over a collapsed region of code will cause the region to be improperly selected.
333324 — Function panel controls in a disabled function may not be dimmed when the function panel is reopened for editing.
336446 — Entering more than 255 characters into the Line Label or Bus Label fields of the Edit Digital Graph dialog box will cause the LabWindows/CVI environment to crash.
336721 — Switching the active application while a control is being moved by the mouse causes the selection outline to not be undrawn.
338093 — Not moving the mouse when using Zoom to rectangle mode triggers EVENT_ZOOM with ZOOM_RESTORE for theeventdata1 parameter of the callback.
341151 — Workspace folders with very long names can cause the LabWindows/CVI environment to crash when loading or saving.
373262 — The Ini_WriteToRegistry and Ini_ReadFromRegistry function panels incorrectly list OS compatibility as Windows 9x/NT/2000.
386081 — Items in the Resource Tracking window can be expanded only if they contain at least two items.
369682 — Once the value of the File name field of the New File from Template dialog box is changed, the File path field does not change extension if the file type is changed.
370519 — The LabWindows/CVI environment crashes when setting a string in the Array Display window to hexadecimal format while debugging a LabWindows/CVI application.
371022 — The LabWindows/CVI environment crashes when entering a path instead of an IP address in the New Remote Debugging Target dialog box.
388073 — The Show Prototype tooltip displays the help button for macros when the previous Show Prototype tooltip was for a function with help documentation.
368470 — The wrong text is selected after dragging multiple lines of text in the Source window into the middle of another line of text.
386160 — Cannot load attribute info for a .fp file when the associated .sub file is encoded as Unicode.
387331 — Clearing a window in the Output Region causes the item to be dimmed in the Window menu.
391055 — Auto indent does not place the cursor in the correct location when pressing the Enter key after a break in a switch statement.
392932 — Documentation generated for variadic functions does not display variable parameter in function prototype.
399264 — The Find command may miss some search matches if the Whole word option is enabled.
403645 — LabWindows/CVI might crash when declaring a variable for the Attribute Value parameter of some attribute accessor functions.
407329 — Selecting Rebuild from the Batch Build dialog box causes a memory leak.
408295 — Source files with several while loops may cause LabWindows/CVI to hang while scrolling the source file.
408324 — LabWindows/CVI will crash when you click the selection button for a ring control while editing a function panel.
Hardware
142035 — Some LabWindows/CVI GPIB functions return positive values if the GPIB driver is not installed.
171624 — CPU usage can spike when using ComRdTerm.
201013 — OpenComConfig does not return an error if the configuration parameters are invalid.
201130 — Calling OpenComConfig with an input queue size greater than 40960 bytes results in unexpected behavior on Windows.
Installer
128084 — Uninstalling LabWindows/CVI from Windows Vista does not completely remove context menu file associations.
149929 — Uninstalling LabWindows/CVI 9.0 may cause some non-NI software to quit working.
177971 — Creating an installer spec file fails if a Microsoft Visual Studio 2008 wizard is explicitly included
334574 — Installing multiple versions of LabWindows/CVI on the same system can cause the wrong versions of the LabWindows/CVI Help to be associated with the development environment.
Performance
129094 — Asynchronous timer limited to intervals no greater than approximately 429 seconds.
129812 — Calling a LabVIEW-built DLL causes the printf family of functions to format a double to a string incorrectly.
139658 — GetFileSize can crash if you pass a path that is too long.
144368 — strtod and scanf can crash in multithreaded applications.
144640 — LabWindows/CVI MAX_PATHNAME_LEN is more restrictive than Windows ANSI path limitation in multibyte systems.
144806 — CmtWaitForThreadPoolFunctionCompletion can hang in some rare circumstances.
155155 — If you enable the Compile with precompiled include file option, LabWindows/CVI may occasionally crash when you view data tooltips during debugging.
157141 — A memory leak occurs in the thread-safe queue.
162398 — Toolbox lists can grow by amounts greater than the allocation policy specifies.
167239 — LabWindows/CVI can hang while editing a large non-source code data file.
175150 — LabWindows/CVI can crash when opening a .c file containing lines with exactly 1020 characters.
182036 — CreateUDPChannelConfig fails if ws2_32.dll is installed to the application directory.
184428 — LabWindows/CVI applications can crash when calling the Delay function from multiple threads.
191778 — Passing NULL to the Data_Buffer or Data_Length parameters of RegEnumerateValue results in a General Protection Fault.
191841 — Matrix operations that use the Intel MKL on Windows have slight numerical differences between LabWindows/CVI 2009 and previous versions of LabWindows/CVI.
196430 — Large static arrays declared in a block scope can cause a stack overflow if Detect uninitialized local variables at run time is selected.
197427 — NIReport_GetPrinters has a small memory leak.
201259 — Calling RegisterWinMsgCallback and UnRegisterWinMsgCallback from multiple threads may result in a crash.
215744 — Calling CNVData functions in network variable callbacks can cause hangs.
41414 4DDCC0IO — A small memory leak exists in network variable creation.
218499 — Calling GetTCPPeerName with an invalid handle can cause the application to hang.
233510 — Ini_GetInt64 doesn't return –5021 (Invalid integer) for numbers greater than LLONG_MAX.
256901 — Passing a pointer to a custom data type to a function that takes a void * will leak memory in a debug build.
258354 — CNVProcessIsRunning may incorrectly report that the process is running if the program is run as a startup program.
253304 — TDMS Files with very high channel counts might be slow to open.
246218 — The numElements parameter of the DefineThreadSafeArrayVar macro is not expression-tolerant.
285443 — The run-time movable custom control (movectrl.fp) leaks memory.
290737 — InetSendMail can crash if the "To:" field exceeds 250 bytes.
298456 — A program that has called EnableDragAndDrop might crash if closed from the Windows taskbar.
292992 — Users cannot completely disallow creating directories in FileSelectPopup and DirSelectPopup.
314876 — The LabWindows/CVI Run-Time Engine can hang when calling CloseCVIRTE in a secondary thread.
335299 — Multiple calls to ClipboardPutBitmap in a multithreaded application causes temporary hang.
356348 — Using the TCP Library from multiple threads may cause a deadlock when combined with locks in the user's TCP callbacks.
339884 — When allocating memory with malloc, LabWindows/CVI will truncate the memory allocated to be an integer multiple of the size of the pointer data type.
355436 — The InetTelnetOpen function limits connections to 100.
343157 — Calling the GetFileAttrs function with an improperly formed path and a non-existent drive may cause a crash.
390072 — A memory leak occurs in the FileBrowser_GetSelectedFiles function when no files are selected or an error occurs
397059 — The GetMonitor functions fail if the monitor configuration changes.
Stand-Alone Applications and Distributions
130423 — The .NET Library cannot be included in a distribution without also including the full run-time engine.
131196 — The Import Measurement & Automation Explorer (MAX) Configuration File checkbox is always checked on the Advanced tab of the Edit Installer dialog box.
137318 — Adding dependencies of an executable to the Installation Files & Directories section in the Edit Installer dialog box displays two copies of the DLL.
141434 — LabWindows/CVI crashes when unloading a workspace with an ActiveX server project after building a distribution.
154605 — Projects with a relative path for the application file can crash when configuring a distribution.
182036 — CreateUDPChannelConfig fails if ws2_32.dll is installed to the application directory.
186565 — LabWindows/CVI distributions cannot install fonts on Windows Vista or Windows 7.
292521 — An application whose installer includes only the "Network Variable Support" sub-item might run slower than expected on a minimally configured target computer.
292805 — An application whose installer includes only the "Network Variable Support" sub-item might not run correctly on a minimally configured target computer.
312179 — Some Microsoft DLLs are automatically included in distributions built with LabWindows/CVI.
316361 — The LabWindows/CVI low-level support driver CVINTDRV.sys contains a security vulnerability.
354481 — User specified icons are not displayed in Windows Explorer for larger sizes in Windows Vista/7.
369355 — Applications that use the DIAdem Connectivity Library that are installed using a distribution built in LabWindows/CVI might generate run-time errors related to the Microsoft Visual C++ 2005 run-time not being installed.
369915 — Creating a distribution for a project that uses the DataSocket Library does not automatically check the NI DataSocket 5.0 option in the Drivers & Components tab of the Edit Installer dialog box.
384581 — The GetExternalModuleAddrEx function fails to load a DLL if it is not in the current working directory or the system path.
396825 — The default value for the Publisher option on General tab of the Edit Installers dialog box is "%company".
User Interface
101593 — Strip chart scroll bar overlaps the plot area.
126708 — PlotArc lacks accuracy for drawing a small angle with a large radius.
129832 — Editing multiple controls changes tab order and z-plane order.
131102 — On Windows Vista, file selection dialog boxes add an extra backslash (\) character when selecting a file at the root of a volume.
131413 — After widening the inc/dec arrows, the entire area of the arrows is not clickable.
134165 — Menu bar does not resize when using the Scale Contents On Resize or Resolution Adjustment options.
135032 — Checkerboard dimming of controls is leaving label text etched.
135264 — The Done button can disappear when you resize a file selection dialog box.
136678 — Menu events cause a crash if there is no menu callback specified and the application has a main callback.
138050 — The Remove All button in the multi-file selection dialog box is missing a corner.
139151 — Debugger does not always catch incorrect use of ATTR_COPY_ORIGINAL_DATA.
139269 — Hidden tab pages of a nested tab control can be made active.
140926 — Changing the axis range on a LabWindows/CVI graph plot with few points causes skewed plot lines.
143075 — Table and tree controls do not scale proportionally to other controls.
145322 — Graph y-axis name not drawn correctly after graph changes position before being displayed.
147737 — Numeric markers do not always adjust correctly to the resizing of a slide control.
149350 — The cursor position of a text box control can be incorrect when typing Thai characters.
151308 — Passing '.' or '..' to the DefaultFileSpec parameter of FileSelectPopup causes a legacy file dialog box to be shown.
154911 — Setting ATTR_INCDEC_WIDTH on numeric controls has no effect if the inc/dec arrows are not visible.
173952 — Truncating tree item strings can cause user applications to crash under some circumstances.
175118 — Minor gridlines of graph controls and minor ticks of numeric slide controls can disappear.
177284 — Table and tree scroll bars are not always clipped to a child panel's bounds.
183301 — Splitter controls with no range limit do not draw shadow when operated.
189247 — Drag and drop operation on the title bar or window frame does not work.
189400 — Loading a very wide .bmp or .pcx file can fail with an Out of Memory error.
190831 — ATTR_NO_EDIT_TEXT allows tab spaces to be entered into a text box control.
193088 — If a LabWindows/CVI popup panel is not active, subsequent popup panels may appear behind the original popup panel.
193403 — The panel attribute ATTR_MOVABLE does not work with Aero enabled on Windows 7/Vista.
194174 — Bitmaps with alpha channels, such as .PNG images, do not print correctly.
194970 — Using string controls with right or center justification causes the cursor to appear in the wrong position when there are trailing spaces
197797 — The strip chart cannot plot more than INT_MAX points.
216830 — Loading a panel with an ActiveX control in a thread other than the main thread will fail.
243203 — LabWindows/CVI file dialog boxes cannot open files accessed through the Libraries button on Windows 7.
231945 — SetCtrlVal does not immediately redraw an LED to the new state.
217094 — EVENT_MOUSE_POINTER_MOVE can nest until the stack overflows if ProcessSystemEvents is called from the event callback.
225134 — Bitmaps obtained with the GetCtrlDisplayBitmap function cannot be used as menu images.
237405 — The event EVENT_LEFT_CLICK_UP can be sent to a panel behind a modal dialog box.
238634 — ActiveX controls aren't dimmed when ATTR_DIMMED is set to True.
256995 — Deleting a tree item after hovering over it may generate a first chance exception.
255807 — When manually sizing a panel with a text box, the error message "The attribute passed is not valid" may be displayed.
255934 — Fonts may not scale correctly when using the panel option Scale Contents on Resize.
256628 — In some cases, a ring control can display a menu that doesn't completely fit on the screen.
250654 — A strip chart that has been scrolled prints as if it were not scrolled.
252100 — The quality of images with transparency may deteriorate with repeated opening and closing of the associated UIR.
253696 — Printing images with transparent backgrounds does not work correctly.
248368 — Hidden table rows and columns can still be clicked on, making them reappear temporarily.
286276 — The frame of the increment and decrement buttons on numeric controls may not draw entirely.
284842 — The GetTableCellRangeVals and SetTableCellRangeVals functions do not work for string cell types in a 64-bit application.
276442 — Displaying a file select popup panel from a panel with a tab control might disrupt the panel z-plane order.
276443 — A tab inserted anywhere but the end of the list will use the wrong image.
276799 — Numeric table cells do not coerce values when values are pasted from the clipboard.
281082 — A strip chart legend may not be drawn correctly if it overlaps the strip chart plot area.
281083 — The y-axis name of a strip chart control might be drawn incorrectly when the y-axis autoscales.
288389 — The splitter control can disappear after is it dragged.
302494 — Memory is leaked when calling GetScaledCtrlDisplayBitmap on graph control with ATTR_COPY_ORIGINAL_DATA set to 0.
303637 — Scrolling strip charts can have inaccurate values for min and max due to rounding errors.
303721 — Table row and column header separators do not line up with the row and column marker lines when Windows visual styles are enabled.
304541 — The Run-Time Movable Control (movectrl.fp) custom control does not display a hand when moving numeric controls.
305258 — GetScaledCtrlDisplayBitmap can hang for some scaling ratios.
306560 — VAL_SIZE_TO_PICTURE can significantly degrade the resolution of pictures if the pictures must shrink.
298632 — Full ticks are not consistently drawn for many numeric controls.
299688 — Some items in the LabWindows/CVI status bar require a double-click to toggle, while others require a single-click.
293672 — Some user interface controls do not draw Windows styles on mouse-over.
293859 — The Floating Style attribute of a child panel can cause displayed panels to display as modal behind other displayed panels.
294159 — and do not work correctly in text controls on multibyte versions of Windows.
292070 — Passing TRUE to the RestrictDirectory parameter of FileSelectPopup does not completely restrict the directory to the initial directory.
37666 3TJ0IB7K — Panels displayed with ATTR_WINDOW_ZOOM set to VAL_MAXIMIZE will not restore after showing the desktop.
328679 — Graph legend items are highlighted after calling RecallPanelState under some conditions.
329406 — LabWindows/CVI crashes when setting the Offset option for a graph if the Absolute Time Display Format is set to a very large number.
329461 — Printing UIR files resizes the table control in the print output.
326106 — If you save UIR files as older versions, LabWindows/CVI does not warn you that features that are unsupported in that version will not be saved.
313512 — Ring control label/value pairs precision does not persist when changed.
314106 — The x-axis of the digital graph displays improper divisions.
310781 — The table control displays a gap between the table cells and the bottom and right edges of the control when resized.
311281 — Graph controls display the x-axis name at an angle if you set the ATTR_XYNAME_FONT attribute to a metafont that rotates text.
312398 — Deleting all lines from a text box control with no lines available to delete causes a nonfatal runtime error.
313765 — The LabWindows/CVI Run-Time Engine may crash when unloading a DLL that contains a panel in a thread other than the main thread.
314344 — Changing the panel title from a different thread can cause a hang.
316365 — Panel toolbars are not fully discarded when created and discarded in a thread other than main.
318200 — The Edit Tabbing Order dialog box does not allow you to modify the tabbing order of controls that are behind overlapping controls.
319561 — SetCursorAttribute does not return an error when passed an annotation attribute.
322979 — Drawing a filled shape on the canvas with a pen width greater than 1 causes the filling to exceed the shape's border.
329376 — The graph legend does not always match the angle of text plots.
329411 — User interface control labels appear to resize when switching from Windows XP to Windows Vista or Windows 7.
333163 — The Choose Date/Time Value dialog box displays an error message for an invalid date three times.
334681 — Setting the Label text in the Edit Tree dialog box to a string greater then 250 characters can crash LabWindows/CVI.
329405 — Numeric control radix does not resize with control text size.
345272 — Tree control may crash when more than 200,000 items are inserted.
363056 — Floating point format in UI controls allows too many digits before automatically switching to scientific format.
337950 — Graph zoom selection box leaves artifacts if a control is moved over the drawing region in between frames.
345703 — Some controls do not print colors correctly in bitmap printing when set to black & white mode.
347056 — Dragging the ring tank control value to change its fluid height at run-time may cause black lines to appear where the previous fluid height was.
347323 — Changing digital graph line label and bus label programmatically does not update the control labels if the plot does not contain any data.
349832 — The mouse wheel scrolls the wrong control while ring control menu is displayed.
350412 — In some cases, the EVENT_LOST_FOCUS and EVENT_COMMIT events are not displayed in Operate mode when changing focus away from controls.
350752 — A tree item tooltip continues to display when the cursor is over a tree item and another active window is in front of part of the tree item.
350944 — The numeric control cannot have a transparent background.
345074 — Passing an incorrect panel attribute to the GetPanelAttribute function causes a general protection fault.
346432 — Child panels in a tab control do not resize when the tab is resized and Scale Contents on Resize is enabled.
347326 — The digital graph control does not limit the Line Label and Bus Label values string size to 255 characters.
348756 — The CVI GUI Localization Utility will not advance to the Right Y Axis of strip charts if the Next button is clicked.
349930 — Mouse tracking is not aborted during a mouse click event if the control callback causes the panel to lose focus.
350416 — ExcelRpt_WriteDataFromTableControl function does not support combo box, ring, or button cell types.
290770 — Popup dialogs appear in the same location where they were located the last time the dialog appeared in that process.
309845 — Tree control tooltip does not use the character set of the tree.
336312 — Calling the GetCtrlVal function for the picture ring control may cause an "Assertion failed" error in the Event Viewer if the picture ring data type is set to " string (char *)".
337804 — Changing the label of a tree item from the Label control or the Quick Edit Window does not update the corresponding entry in the Default Index option for that tree item.
341569 — The index counts in the Default index option can have the wrong value if items are inserted in the tree out of order.
343989 — Some Programmer's Toolbox functions do not support Lab Style controls.
352509 — ATTR_XLOOSE_FIT_AUTOSCALING_UNIT attribute does not work well with log scales.
373393 — Classic-style decoration controls that have rounded edges appear speckled.
379530 — Opening a UIR file containing a tab control attached to a splitter control that is saved in LabWindows/CVI 7.1 causes an "Invalid control ID" error.
379767 — UIR files saved in LabWindows/CVI 8.1 and earlier that contain a knob, dial, gauge, or meter can corrupt the environment memory when opened in LabWindows/CVI 8.5 or later.
388199 — Passing the same index for the Item Index and the Relative Index parameters of the AreTreeItemsRelated function returns the incorrect value for some relationships.
275954 — Setting the ATTR_FIRST_VISIBLE_LINE attribute does not cause a text box control to redraw in some cases.
386878 — The DisplayImageFile function uses more memory than is necessary.
391657 — The value of the eventData1 parameter is always 1 in a callback for an EVENT_COMMIT event of a graph cursor that is locked.
392640 — Cannot duplicate panels with controls that are duplicated and attached to a splitter control.
396304 — LabWindows/CVI might crash when running out of memory during a table copy operation.
403028 — Changing the value of ATTR_INTERPOLATE_PIXELS can leave the plot with extraneous data.
413695 — Radial controls do not resize all elements proportionally.



ID Known Issue
.NET and ActiveX
165495

Return		 Installing an application that uses ActiveX controls to a clean machine might result in a runtime error.
This issue can occur if the Microsoft Visual C++ 2005 runtime is not on the machine before installation of the LabWindows/CVI application.

Workaround: Install the Microsoft Visual C++ 2005 SP1 redistributable package.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
174102

Return		 Hidden LabWindows/CVI ActiveX Automation interface is visible in function panel tree
The _CVIAutomationServerInterface node should not be used.

Workaround: Regenerate the instrument using the per server option.

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
204719

Return		 Wrappers generated for the Microsoft.JScript .NET assembly will not compile.

Workaround: Find all function parameters with the name small in the generated source and include files and rename the parameters to something like _small.

Reported Version: 8.0   Resolved Version: 2010   Added: 05/05/2010
217093

Return		 LabWindows/CVI .NET components do not get installed if .NET 2.0 is installed.
LabWindows/CVI requires only .NET 1.1 SP1 to operate correctly.

Workaround: Install .NET 2.0 and repair the LabWindows/CVI installation.

Reported Version: 9.0   Resolved Version: 2010   Added: 09/17/2010
119213

Return		 An exception can occur when inserting an image into a report created with WordReport.fp

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2010   Added: 11/22/2010
44669
4HK7LF7K

Return		 The WordRpt_SetHeader function might not always work as expected.
Embedding pictures in a header does not work.

Workaround: N/A

Reported Version: 8.5   Resolved Version: N/A   Added: 11/22/2010
283042

Return		 A LabWindows/CVI ActiveX server can crash while shutting down if there are open client connections to the server.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2010 SP1   Added: 03/08/2011
283065

Return		 LabWindows/CVI cannot generate wrappers for .NET Framework 4.0 assemblies.
The Create LabWindows/CVI .NET Controller dialog box cannot generate wrappers for .NET Framework 4.0 assemblies. When trying to create a wrapper for .NET Framework 4.0 assemblies, the error Error occurred while generating .NET controller code. The method or operation is not implemented. will be shown.

Workaround: Paste the following XML into a file named cvi.exe.config. Place this file next to cvi.exe in the LabWindows/CVI directory.








After you've done this, restart LabWindows/CVI.

Reported Version: 8.5   Resolved Version: 2012   Added: 03/08/2011
299606

Return		 The LabWindows/CVI ActiveX Controller Wizard does not display all registered ActiveX servers.
Servers registered with paths of type REG_EXPAND_SZ are not listed.

Workaround: Manually browse to the server object containing a type library.

Reported Version: 7.1   Resolved Version: 2012   Added: 07/28/2011
313299

Return		 CVI_AppGetLinesFromFile returns a string with maximum length of INT16_MAX characters.
The maximum puts too small of a limit on the amount of source code text that can be returned from a single call toCVI_AppGetLinesFromFile .

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2012   Added: 02/07/2012
361691

Return		 The GetAllBreakpoints LabWindows/CVI ActiveX Server Interface function does not set numBreakpoints output parameter.
The variable remains uninitialized after the function call if it was not initialized before.

Workaround: Use the length of the breakpoint line numbers safearray output parameter.

Reported Version: 8.1   Resolved Version: 2013   Added: 07/20/2012
335556

Return		 The Word Report WordRpt_GoToCell function will always go to the first column when used in a Microsoft Word 2007 file or later.

Workaround: Load an existing file saved as a Word 97-2003 document. Or, use the WordRpt_WriteToCell function with an empty string instead of the WordRpt_GoToCell function.

Reported Version: 8.5.1   Resolved Version: 2012   Added: 07/26/2012
376796

Return		 Creating an AppDomain in .NET using the mscorlib.fp library causes a System.OutOfMemoryException to be thrown.
This issue occurs on Windows 8 or on a system with .NET 4.5 installed. Refer to KnowledgeBase Article 64GCHJUB: Out of Memory Exception when Using LabWindows/CVI Built TestStand User Interface with .NET 4.5 for more information.

Workaround: N/A

Reported Version: 9.0.1   Resolved Version: 2012 SP1   Added: 02/27/2013
345700

Return		 The CA_InitActiveXThreadStyleForCurrentThread function return success even if it fails.
If the CA_InitActiveXThreadStyleForCurrentThread function is called and the threading model is already set to a model different from what is specified by the threadStyle parameter, the function still returns 0, which indicates that it succeeded. In this case, the function fails to set the threading model.

Workaround: N/A

Reported Version: 5.5   Resolved Version: 2012   Added: 08/05/2013
Analysis
140249

Return		 NonLinearFitWithMaxIters may not return an error if performing the maximum number of iterations does not result in convergence.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
140913

Return		 ThresholdPeakDetector has unexpected results when width is greater than 1.
The peakIndices parameter will have one additional value that is not a peak while the numberOfPeakIndicesparameter will contain the correct number of peaks.

Workaround: Ignore the last value in the peakIndices parameter.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
156791

Return		 Several Analysis Library function panels are incorrectly relying on AnalysisLibPowerOfTwo enum.
No values were assigned in the enum, and the values the compiler assigns are incorrect.

Workaround: Enter the actual power of two number and not the enum value.

Reported Version: 8.0   Resolved Version: 2009   Added: 05/05/2010
183434

Return		 NonLinearFitWithMaxIters function does not return the best fit array when the maximum number of interations is exceeded.
NonLinearFitWithMaxIters also does not return the mean squared error.

Workaround: N/A

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
247895

Return		 The threshold parameter in MultipleToneInfo, MultipleToneSignal, CxMultipleToneInfo, and CxMultipleToneSignal does not always work.
Tones can be returned with an amplitude higher than the specified threshold.

Workaround: Manually filter the returned tones to exclude tones with an amplitude greater than the threshold.

Reported Version: 8.0   Resolved Version: 2010   Added: 11/22/2010
362123

Return		 Gamma, GammaC, and Beta functions compute regularized form, which is not accurately described in help.
The Gamma function actually computes the gamma function or the regularized incomplete gamma function. The GammaC function computes the regularized complimentary incomplete gamma function. The Beta function computes the beta function or the regularized incomplete beta function.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 07/18/2012
361840

Return		 For values of x that are very large, sin (x) returns x instead of returning a number between -1 and 1.
This behavior occurs only for large values of x, such as 1e+20.

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2013   Added: 07/20/2012
Compiler
120676

Return		 Even with C99 enabled, some variables cannot be declared immediately following a switch statement.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 9.0.1   Added: 05/05/2010
127909

Return		 Instrument drivers are marked for compilation with each configuration switch.
Normally, LabWindows/CVI only marks for recompilation those files that do not already have up-to-date object files for the current configuration in the cvibuild folder. Instrument files are the one exception to this.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
128921

Return		 Incorrect compilation of code containing multiple anonymous inner struct members.
For instance, the elements of the bitfield of the following structure may not evaluate correctly:

typedef struct {
  union {
    struct {
      unsigned short flag1 : 1;
      unsigned short dummy : 3;
      unsigned short flag2 : 4;
      unsigned short flag3 : 4;
      unsigned short dummy2 : 4;
    };
    unsigned short all;
  } flags;
} flagset;


Workaround: N/A

Reported Version: 8.5   Resolved Version: 9.0.1   Added: 05/05/2010
129546

Return		 Cannot use the Utility or Formatting and I/O Libraries and some Interface to Win32 API functions at the same time.
You can use one set of functions or the other but not both. The functions that conflict are the following: Formatting and I/O Library:
  • CloseFile
  • OpenFile
  • ReadFile
  • WriteFile
  • SetCommitMode
Utility Library:
  • GetSystemTime
  • SetSystemTime
  • Beep
  • CopyFile
  • DeleteFile
  • GetFileSize
  • GetFileTime
  • SetFileTime
  • inp
  • inpw
  • inpd
  • outp
  • outpw
  • outpd


Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
131800

Return		 Too many initializers error when initializing incomplete array typedefs.

Workaround: Replace the typedef type with the explicit incomplete array declaration.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
132689

Return		 LabWindows/CVI autocomplete feature does not work for nested struct array fields.
The following code demonstrates the problem:

struct A {
  int a[10];
  int b[10];
};

struct B {
  struct A sA[10];
  int c;
};

void main(void) {
  struct B sB[10];
  int i, j;

  // BUG: Type the following and you will get completion for struct A.
  sB[i].sA.
  // BUG: Type the following and you will NOT get completion for struct A.
  sB[i].sA[j].
}

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
134066

Return		 Linking a project can fail with an Out of Memory error in very rare circumstances,

Workaround: One workaround to try is adding a handful of empty functions to one of your source files. This will change the number of symbols in your final binary and mask the bug that causes this Out of Memory error.

Reported Version: 8.5.1   Resolved Version: 9.0.1   Added: 05/05/2010
134406

Return		 The Interface to Win32 API fails to compile with third-party compilers if C99 is enabled.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
134407

Return		 Build warnings are reported when compiling the Interface to Win32 API with third-party compilers.
These errors occur because LabWindows/CVI defines some pragmas that are specific to LabWindows/CVI in the Win32 API header files (basetsd.h and winnt.h). Compilers that do not recognize these pragmas report errors.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
135927

Return		 ActiveX wrappers fail to compile when LabWindows/CVI uses the Borland compatibility mode.
You may receive the link error Undefined symbol '_IID_IDispatch' referenced in "".

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
136156

Return		 When passing 64-bit integers to a 32-bit integer parameter in a function call, other parameters can end up with incorrect values.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
138186

Return		 Function pointers for functions without parameters require void keyword in parameter list.

Workaround: Instead of declaring a function pointer like this:
typedef int (*FuncPtr)();
Declare it like this with the void keyword:
typedef int (*FuncPtr)(void);

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
139419

Return		 Including WSPiApi.h and WS2tcpip.h can cause Interface to Win32 API compile errors.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
145895

Return		 Auto completion of structs does not handle arrays of structs inside other structs correctly.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
152421

Return		 The compiler can crash when very large arrays are initialized with small string literals.
If you initialize a large char array with a small string literal like the following:

char buf[500000] = "";

compilation may crash.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
152423

Return		 Arrays initialized with string literals are not completely filled with zero bytes.
If you initialize a char array with a smaller string literal such as the following:

char buf[10] = "";

the bytes that are not explicitly initialized should be zero, but they are not.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
152425

Return		 No error reported when arrays are initialized with string literals that are too large.
Initializations such as the following:

char A[3] = "hello";

should report an compile error, but they do not.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
158055

Return		 Cannot include windows.h in the Interactive Execution window.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
162554

Return		 The non-fatal runtime error "Local was referenced before being initialized" may occur incorrectly.
The following code recreates this incorrect non-fatal runtime error:

void foo (const void *buffer) {}

void main() {
  struct {
    int x;
    double y;
  } buf[1];
  buf[0].x = 0;
  buf[0].y = 0;
  foo(buf);
}

Workaround: Turn off Detect uninitialized local variables at run time in the Build Options dialog box.

Reported Version: 7.1.1   Resolved Version: 2009   Added: 05/05/2010
162814

Return		 Cannot embed a type library in a DLL if the function panel has a custom data type.

Workaround: N/A

Reported Version: 8.0.1   Resolved Version: 2009   Added: 05/05/2010
165697

Return		 The last initialized global or static local variable in a file may not be fully allocated.
This can occur only if the total storage of global or static variables exceeds 16384 bytes.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
168621

Return		 Using an object file built with precompiled headers can lead to link errors.
Using an object file built while the build configuration was set to Debug in a Release project can cause link errors. Debug symbols from the precompiled headers are added into the created .obj file.

Workaround: Only build object files (Options»Create Object File) when the build configuration is set to Release.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
169037

Return		 Linking against mixed-mode .NET DLLs may cause LabWindows/CVI applications to crash.

Workaround: Dynamically load the entry points in the mixed-mode DLL using LoadLibrary and GetProcAddress.

Reported Version: 8.5   Resolved Version: 2010   Added: 05/05/2010
177794

Return		 LabWindows/CVI can crash when compiling a complex mathematical computation that is not assigned to a variable.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2009   Added: 05/05/2010
186965

Return		 Compile.exe crashes on project with "Add type library resource to DLL" option enabled.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
201360

Return		 Incorrect usage of designated initializers (C99) may result in a hang in the LabWindows/CVI environment during compilation.
When compiling in debug mode, the following code snippet and others like it will hang the LabWindows/CVI environment.

typedef struct {
  char *s;
  int b;
} foo;
// note the initialization of undeclared member a
foo f = { .s = "bar", .a = 2, .b = 3 };


Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009 SP1   Added: 05/05/2010
203051

Return		 Some constant array size expressions may be incorrectly reported as variable-length in C99 mode.
When building with C99 extensions enabled, size expressions involving the ternary conditional operator are treated as non-constant expressions. This can result in compiler errors reporting that a variable-length array has been illegally declared..

Workaround: Disable C99 extensions.

Reported Version: 9.0   Resolved Version: 2010   Added: 05/05/2010
206504

Return		 Building debug versions of very large projects may cause LabWindows/CVI to run out of memory.

Workaround: Right-click files that do not need to be debugged and select Enable 'O' Option. This option removes debugging information from the compiled object file, resulting in a much smaller memory footprint.

Reported Version: 9.0   Resolved Version: 2013   Added: 05/05/2010
222105

Return		 Using XCOPY in a build step to copy a file over an existing file can break subsequent builds.
Updating the command to specify the /Y option will not work until the cmd.exe and xcopy.exe processes have been manually stopped using the Task Manager.

Workaround: Specify the /Y option to overwrite existing files without prompting.

Reported Version: 9.0   Resolved Version: 2010   Added: 09/17/2010
232139

Return		 LabWindows/CVI can recompile a source file if the timestamp of a .obj file changes, but there has been no change to the corresponding source file.
LabWindows/CVI should only check to make sure the timestamp on the .obj file is later than the corresponding source file. The current behavior can cause problems on high latency network drives, or if other programs, such as anti-virus programs, modify object files.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2010   Added: 09/17/2010
232194

Return		 LabWindows/CVI ignores invalid symbols in macro names.
For example, LabWindows/CVI reports a duplicate macro definition for this code:

#define a$aaa    10
#define a$bbb    20

LabWindows/CVI ignores the invalid symbol ($) and everything that follows it.

Workaround: Do not use invalid symbols in macro names.

Reported Version: 8.0   Resolved Version: 2010   Added: 09/17/2010
232196

Return		 LabWindows/CVI does not consider '$' to be a valid character in a symbol identifier.
The C standard doesn't require that this character be supported, but some compilers do support it.

Workaround: Do not use the '$' character in a symbol identifier.

Reported Version: 8.0   Resolved Version: 2010   Added: 09/17/2010
232258

Return		 You cannot use word "defined" in a macro definition.
For example, the following code will not compile:

#define MY_MACRO defined(_CVI_)
#if MY_MACRO
int i;
#endif


Workaround: N/A

Reported Version: 8.0   Resolved Version: 2010   Added: 09/17/2010
237998

Return		 Cannot link some uuid.lib symbols in a 32-bit program.

Workaround: N/A

Reported Version: 9.0   Resolved Version: N/A   Added: 11/22/2010
240722

Return		 Including strsafe.h causes compilation errors.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2010   Added: 11/22/2010
284771

Return		 When using third-party compilers, linker errors refer to temporary object files.
If link errors are found for multiple modules, the link errors will all be reported in the same temporary object file.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 03/04/2011
275934

Return		 Including the http.h Win32 API header file can result in missing function prototype compile errors.
If you have enabled the Require function prototypes option in the Build Options dialog box, including http.h can result in a missing function prototype compilation error.

Workaround: If the function reported as missing a prototype does not take any parameters, ensure the keyword voidis added to the parameter list in the function declaration.

Reported Version: 9.0   Resolved Version: 2010 SP1   Added: 03/09/2011
276524

Return		 compile.exe may report link errors for National Instruments libraries.
If the LabWindows/CVI development environment has not been launched, compile.exe might report link errors for some libraries, such as the LabWindows/CVI SQL Toolkit or the Programmer's Toolbox.

Workaround: Run LabWindows/CVI before using compile.exe.

Reported Version: 7.1   Resolved Version: 2012   Added: 03/09/2011
277739

Return		 Compiling a file with a syntax error can cause LabWindows/CVI to crash.
A very specific type of syntax error can cause LabWindows/CVI to crash. For example, compiling a file that contains the following code will cause LabWindows/CVI to crash.

void a(b, int c) { int d = b; }

Workaround: Remove the syntax error before recompiling.

Reported Version: 5.0   Resolved Version: 2013   Added: 03/09/2011
309184

Return		 compile.exe can crash when passed a project path that can't be found on disk.
If you pass a .prj file and one or more .c files to compile.exe and the .prj file cannot be found on disk, compile.exe will crash.

Workaround: Ensure the .prj file can be found.

Reported Version: 7.1   Resolved Version: 2012   Added: 07/26/2011
309627

Return		 LabWindows/CVI can crash when compiling some K&R style functions.
This crash occurs only if you disable the Require function prototypes option. For example, if you attempt to compile a file with the following code, LabWindows/CVI crashes.

void foo (a)
int a(enum {x,y});
{
}


Workaround: Enable the Require function prototypes option and add a prototype for the function.

Reported Version: 9.0   Resolved Version: 2012   Added: 07/28/2011
295246

Return		 A source file containing a very large array of structures might fail to compile.
For example, if you declare an array of 5000000 NIComplexNumber structures, LabWindows/CVI will fail to compile the file without any error message.

Workaround: Either:
  • Set the Debugging level option (Options»Build Options) to No run-time checking.
  • Define the array in a new source file. Right-click the new source file in the project tree and select Enable .Obj Option.


Reported Version: 8.1   Resolved Version: 2013   Added: 07/30/2011
327730

Return		 LabWindows/CVI crashes during compilation when a very long variable name is used.
Variables with names of roughly 500 characters or longer will cause LabWindows/CVI to crash when compiling.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 01/09/2012
335358

Return		 Using the bit shift operator multiple times on the same line of code produces incorrect results for 64-bit integers in a 32-bit application.
This issue occurs when the result of one bit shift is used for another bit shift in the same line of code. For example:unsigned int a = 1, b = 62; unsigned long long result = 1ULL << a << b; 

Workaround: Separate the two bit shift operations into two separate lines of code.

Reported Version: 9.0   Resolved Version: 2012   Added: 02/14/2012
318253

Return		 False positive user protection error when using an Interface to Win32 API struct.
N/A

Workaround: Refer to the Disabling User Protection section in the LabWindows/CVI Help. Access this section through the Table of Contents by selecting Programmer Reference»LabWindows/CVI Compiler Overview»User Protection»Disabling User Protection.

Reported Version: 7.0   Resolved Version: 2012   Added: 02/15/2012
363456

Return		 Compiler warning when using __int64 in switch statement expression in a 32-bit configuration.
"Warning: Conversion from '__int64' to 'long' might lose data" can occur if the switch expression is of type __int64 and all of the case expressions are of type int or long. The conversion does not actually occur and the warning can be ignored.

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2012 SP1   Added: 07/18/2012
359304

Return		 The modulo operation with 64-bit integers in a 32-bit configuration may produce incorrect results.
The result will likely be incorrect if the second operand is negative.

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2013   Added: 07/22/2012
368271

Return		 When using an external optimizing compiler, compiler defines that are defined to strings with escaped quotations are not passed to the external compiler as strings.
For example, adding the following define to the Compiler Defines section in the Build Options dialog box:/DMYDEFINE="\"abc def\"" sends the following define to the third-party compiler: /DMYDEFINE="abc def"

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012 SP1   Added: 02/21/2013
404327

Return		 LabWindows/CVI may crash when changing the default calling convention of a library after it has been built.

Workaround: Re-open LabWindows/CVI and change the calling convention.

Reported Version: 7.0   Resolved Version: 2013   Added: 08/05/2013
Debugging
127318

Return		 Calling some inifile.fp functions while the Programmer's Toolbox is compiled from source code can result in a false report of leaked resources.
The temporary file ini$$0.tmp may be reported as a leaked resource.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
134586

Return		 Erroneous user protection error when accessing member of a multidimensional array of structs/pointers.

Workaround: Use one of the following workarounds:
  • Set the Debugging level in the Build Options dialog to box No run-time checking . This requires no changes to code, but gives up the benefit of the run-time checks.
  • Call SetBreakOnProtectionErrors in specific files or in the body of certain functions to locally avoid breaking/terminating execution when these errors are generated.


Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
137735

Return		 The Source Code Browser does not retain all its settings when a file is recompiled.
You must browse to the variable again to see the correct display.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
139139

Return		 Viewing memory as HEX longs (64-bit) in the Memory Display window causes all values to turn red.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
155604

Return		 Adding a watch expression that references a variable declared in block scope can hang the program when it is debugged.

Workaround: N/A

Reported Version: 8.5.1   Resolved Version: 2009   Added: 05/05/2010
177188

Return		 LabWindows/CVI debugger can crash when using memcpy to copy data from a const struct array.

Workaround: Remove the const keyword from the array declaration.

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
179034

Return		 Obtaining a non-existent attribute with CVIXMLGetAttributeByName results in a false report of leaked resources.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
184979

Return		 Breakpoint pass counts are off by one.
For a pass count of n, LabWindows/CVI breaks on the nth pass, instead of the nth + 1 pass.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2009   Added: 05/05/2010
189661

Return		 Variables window does not always show a variable declared in for-loop scope.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
217295

Return		 AppendString might work incorrectly when debugging a LabWindows/CVI program.
If you use toolbox.obj as the program file for the Programmer's Toolbox instrument, the debug information for the size of the pointer reallocated by AppendString will be incorrect, which may lead to errors from functions such as strlen.

Workaround: Attach toolbox.c as the program file for the Programmer's Toolbox instrument.

Reported Version: 7.1.1   Resolved Version: 2010   Added: 09/17/2010
255342

Return		 Remote debugging can hang when debugging DLLs with DllMain.

Workaround: Move DllMain to a source code module that is not compiled with debug info.

Reported Version: 8.0   Resolved Version: 2013   Added: 11/18/2010
257782

Return		 The Resource Tracking window does not track thread local variable handles.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2010 SP1   Added: 11/18/2010
247337

Return		 Watchpoints for nested structures may show incorrect values.
The value displayed in a tooltip might also be incorrect.

Workaround: View the value of the variable in the Variables window.

Reported Version: 9.0   Resolved Version: 2010   Added: 11/22/2010
285461

Return		 Attaching the LabWindows/CVI debugger to a C++ DLL might result in significant performance degradation.
If you are debugging a process that calls into a C++ DLL, significant performance degradation might occur. This performance degradation has occurred for C++ DLLs that throw many exceptions or create and destroy large STL maps.

Workaround: There is no workaround while debugging, but there is no performance degradation while running outside of the LabWindows/CVI debugger.

Reported Version: 7.0   Resolved Version: 2013   Added: 03/03/2011
255345

Return		 TDMS_CloseFile can take a long time to complete when the LabWindows/CVI debugger is attached.
If your TDMS file contains many channels, a call to TDMS_CloseFile can take a very long time. The more channels you have, the longer the call can take. This occurs only when the LabWindows/CVI debugger is attached. This is related to Known Issue 285461.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2013   Added: 03/10/2011
278151

Return		 A breakpoint with a pass count and a condition will never break execution as a result of the pass count.
If a breakpoint has both a condition and a pass count, the pass count will be ignored. As a result, if the condition is never met, the breakpoint will never break execution.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2012   Added: 03/23/2011
298184

Return		 Non-fatal user protection errors can sometimes display only the message &%%s&.
This can happen when there is a mismatch in the release vs. debug build configuration between a LabWindows/CVI EXE and its DLLs.

Workaround: Ensure all LabWindows/CVI binaries in a process are either in debug configuration or release configuration.

Reported Version: 7.1   Resolved Version: 2010 SP1   Added: 07/28/2011
294217

Return		 The Edit Breakpoint dialog box incorrectly maintains a reference to old files.
If you place breakpoints in one workspace and then debug a project, the source files those breakpoints were placed in will not be removed from the Edit Breakpoint dialog box when a new workspace is loaded.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 08/01/2011
37498
44K3HK07

Return		 Variables defined inside of a block statement cannot be added to the Watch window.
For instance the variable a in the following code cannot be added to the Watch window.

void foo (int var)
  if (var == 0) {
    int a;
    a = var;
  }
}

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 08/02/2011
326213

Return		 The Go to Line button causes an internal assert to be triggered.
When execution is suspended on a breakpoint, pressing Go to Line in the Breakpoints dialog box for a breakpoint that has a valid location but an invalid condition causes an assert to be triggered.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 01/09/2012
316246

Return		 LabWindows/CVI changes foreground lock timeout to 0 when debugging.
When debugging an application, the debugger changes the HKEY_CURRENT_USER\Control Panel\Desktop\ForegroundLockTimeout registry key to 0. This is necessary to control which window is in the foreground when debugging. The debugger should restore the registry key to its previous state when it is done debugging.

Workaround: N/A

Reported Version: 7.1   Resolved Version: 2012   Added: 02/08/2012
322203

Return		 If you change a breakpoint due to an invalid condition while you are debugging, LabWindows/CVI ignores the next breakpoint.
If your code contains a breakpoint with an invalid condition followed by another invalid breakpoint (either with an invalid condition or set on a line containing no executable code), LabWindows/CVI displays the Invalid Condition dialog box for the first breakpoint. If you make the condition valid and click Replace or click Delete to delete the breakpoint, LabWindows/CVI ignores the next breakpoint.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 02/09/2012
324351

Return		 Canceling from the Invalid Breakpoint dialog box causes the LabWindows/CVI debugger to ignore all remaining breakpoints and continue execution.
If you have a breakpoint with an invalid condition when you begin debugging, LabWindows/CVI displays the Invalid Condition dialog box for that breakpoint. However, if you click Cancel in this dialog box, LabWindows/CVI resumes execution of the program. All other breakpoints following this breakpoint will be skipped and debugging will continue.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 02/09/2012
324829

Return		 LabWindows/CVI crashes while debugging when adding a conditional breakpoint to the Interactive Execution window if the window doesn't contain any executable code.
N/A

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 02/10/2012
325547

Return		 Error message in the Invalid Condition dialog box may overflow text region.
When debugging and a breakpoint with an invalid condition is hit, the Invalid Condition dialog box opens. Replacing the condition with a longer but still invalid condition causes the error message to be longer, but the dialog box does not expand to accomodate the longer message.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 02/10/2012
333287

Return		 Cursor does not change back to arrow after operating the splitter in the Watch Window while debugging.
This occurs only when debugging an application and execution is not suspended. Similar behavior occurs for both the vertical and horizontal splitters.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2012   Added: 02/15/2012
353320

Return		 Attempting to edit a "??" entry in the Memory window causes an error.
In LabWindows/CVI 2009 and earlier the error is "Cannot write to address
Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 07/20/2012
358560

Return		 Function name is not reported in Break On Library Errors message.

Workaround: N/A

Reported Version: 7.1   Resolved Version: N/A   Added: 07/22/2012
335983

Return		 Tooltip for symbol values during debugging may appear on top of the editor's scrollbar.

Workaround: N/A

Reported Version: 8.0   Resolved Version: N/A   Added: 07/24/2012
370519

Return		 The LabWindows/CVI environment crashes when setting a string in the Array Display window to hexadecimal format while debugging a LabWindows/CVI application.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012 SP1   Added: 02/21/2013
378420

Return		 The CNVGetFolders and CNVGetVariables functions return string arrays that show the incorrect number of elements while debugging.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2013   Added: 02/22/2013
Development Environment
126050

Return		 tmpdir registry value is not used when backing up files.
The registry key HKLM\SOFTWARE\National Instruments\CVI\\tmpdir should be able to specify what directory temporary files are saved in. However, this key is not used.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
127036

Return		 LabWindows/CVI may display repeated save prompts if a project file path is made invalid.
If files LabWindows/CVI is using are moved on disk while they are open in LabWindows/CVI, you may receive multiple prompts to save the files.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
127953

Return		 Closing a workspace may not remove all the files associated with a workspace.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2010   Added: 05/05/2010
129695

Return		 LabWindows/CVI can crash on exit after TestStand executes code modules in an external instance of LabWindows/CVI.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 9.0.1   Added: 05/05/2010
130204

Return		 Multiple file search does not ignore invalid paths when searching only a specific set of files.
When searching multiple files in LabWindows/CVI, if you choose not to search an entire folder by unchecking theSearch in Folders checkbox, LabWindows/CVI still tries to validate the path in the dimmed Directory control. If that path is not valid, LabWindows/CVI does not proceed with the search.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
131218

Return		 The Edit Item dialog box of a tree control shows an incorrect description of the image name.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
133845

Return		 Table row labels cannot be sized when the column labels are not visible and vice-versa.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
134049

Return		 User Interface Editor does not retain the awareness that it should save the .uir in an older format.
If you override the .uir format when you save a .uir file, LabWindows/CVI does not remember this. Therefore, the next time you save the .uir file using , it will use the default format instead. To continue saving in the different format you'll have to use the Save As option and manually change the ring selection each time.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
135900

Return		 The Workspace window title bar does not show Aero transparency.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
136241

Return		 Attempting to run code in a released Interactive Execution window runs the project instead.
Pressing the Run arrow on the toolbar when the Interactive Execution window is released runs the currently active project instead of the code in the Interactive execution window.

Workaround: Confine the Interactive Execution window.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
136293

Return		 LabWindows/CVI can crash after removing from the workspace a project that uses a third party compiler.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
140209

Return		 Cannot change coordinates of a control label in the User Interface Editor if the control is in a tab page.
This bug occurs if you select only the control label and not the entire control.

Workaround: Select the entire control to move the label.

Reported Version: 8.5.1   Resolved Version: 9.0.1   Added: 05/05/2010
149012

Return		 Cannot list ViInt64 attributes in function panels.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
154794

Return		 Web links in the Help menu do not work when .html files are not associated with a Web browser.
If .html files are not associated with a Web browser, but are instead associated with a program like notepad.exe, the links will not work.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
156166

Return		 Cut Line does not work correctly with a collapsed block of code.
The cursor will jump to the top of the source file, and the editor will not redraw for a period of time.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
156975

Return		 The User Interface Editor prompts you to assign constant names when backing up files.
If any of your controls, panels, menu bars, or menu items have a blank constant name, a dialog box displays every time the *.uir file is backed up.

Workaround: Make sure all of your UI objects have constant names.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
157568

Return		 Go to Next Reference does not cycle through all references of a variable or a function in other files.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
162197

Return		 Help tooltip for the Run button in the toolbar is incorrect after running the Interactive Execution window.

Workaround: N/A

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
166027

Return		 Launching the Icon Editor results in the error Value is invalid or out of range.

Workaround: Load the icon editor project (samples\apps\iconedit\iconedit.prj), set the configuration to Release, and rebuild the project.

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
168302

Return		 Numeric float-type function panel controls cannot be added through automation.

Workaround: Call FPGenSetParamDisplayFormat to set the correct display format for the control after creating the control but before inserting the function in the tree.

Reported Version: 5.0   Resolved Version: 2009   Added: 05/05/2010
168426

Return		 Using an RT target originally configured by browsing the network can result in "The target machine is not connected to the network" errors.

Workaround: Manually enter the IP address of the RT target instead of selecting it from the browse list.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
172750

Return		 The LabWindows/CVI GUI Localization Utility preview does not work correctly with non-native character sets.
If the .uir file is set to the Native character set, it will not correctly preview character sets other than the native character set.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
179291

Return		 Labels for numeric slide controls do not redraw if the display format is set to Scientific or Engineering, and the data type is then changed to int64 or unsigned int64.
If you try to operate the control in the LabWindows/CVI User Interface Editor while the label is not drawn, LabWindows/CVI may crash.

Workaround: Set the desired data type before setting the format.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
182743

Return		 Editing a panel that has a control with a label of exactly 50 characters can cause a crash.

Workaround: Shorten or lengthen the control label.

Reported Version: 6.0   Resolved Version: 2009   Added: 05/05/2010
185942

Return		 Cannot add empty function panel file to a project.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2009   Added: 05/05/2010
189843

Return		 The Perforce 2009.1 client may cause LabWindows/CVI 2009 to crash.
LabWindows/CVI may crash when the Perforce SCC DLL is unloaded.

Workaround: Upgrade to the Perforce 2009.2 client.

Reported Version: 8.1   Resolved Version: N/A   Added: 05/05/2010
193526

Return		 Adding a watch expression that already exists fails silently.
The existing watch expression should be made visible in this case.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2009   Added: 05/05/2010
194053

Return		 LabWindows/CVI can display multiple prompts to check out a project file from source code control.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2009   Added: 05/05/2010
198012

Return		 Dragging binary files, such as a static library, between projects may result in an exception.
If this is done, LabWindows/CVI may confuse what files are in what projects. If this happens, save the current workspace and restart LabWindows/CVI.

Workaround: Do not drag binary files between projects.

Reported Version: 8.1   Resolved Version: 2010   Added: 05/05/2010
201055

Return		 Type library generation may fail if FP control names contain ODL keywords.
When generating type libraries, FP control names are converted to lowercase, which causes problems for names such as "Auto" and "Register", which become ODL keywords "auto" and "register".

Workaround: Modify the names of the FP controls.

Reported Version: 8.0   Resolved Version: 2010   Added: 05/05/2010
203337

Return		 The DirectShow API in the full Interface to the Win32 SDK is unusable.
This API requires multiple header files that are not included in the LabWindows/CVI installation.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2010   Added: 05/05/2010
207820

Return		 Modifying a menu bar font can hide elements of the Edit Menu Bar dialog box.
If you change a menu bar font size to be very large, the Customize Font button will be hidden by the menu bar preview the next time you try to edit the menu bar.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2010   Added: 05/05/2010
167925

Return		 Showing available attributes may crash LabWindows/CVI.
For more information, see KB 526B6OXU.

Workaround: Follow the instructions described in KB 526B6OXU.

Reported Version: 9.0.1   Resolved Version: 2009   Added: 09/17/2010
172157

Return		 Diffing two files can cause window contents to draw in the wrong window.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009 SP1   Added: 09/17/2010
237395

Return		 Dragging a file from the Open File dialog box to the LabWindows/CVI Project Tree can cause LabWindows/CVI to crash.

Workaround: Open files through the Open button of the dialog box, not by dragging files from the dialog box to the Project Tree.

Reported Version: 8.1   Resolved Version: 2010   Added: 09/17/2010
258505

Return		 Selecting "Create New File" on a project folder results in an invalid file.
If you right-click a folder in a LabWindows/CVI project and select Create New File, you will not be able to create anEmpty file.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2010 SP1   Added: 11/17/2010
254788

Return		 LabWindows/CVI doesn't remember source line position of the first file opened until a second file is opened.
If you scroll down in the first file you open in LabWindows/CVI before you open another file and then close the first file and reopen it, the file will be scrolled back to the top of the file.

Workaround: Open a second file.

Reported Version: 7.1   Resolved Version: 2010   Added: 11/18/2010
256142

Return		 Copying collapsed tree items with images in the User Interface Editor can cause LabWindows/CVI to crash.

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2010   Added: 11/18/2010
252825

Return		 The Variables window might flicker when debugging a DLL built using LabWindows/CVI.

Workaround: N/A

Reported Version: 8.5.1   Resolved Version: 2010   Added: 11/19/2010
253907

Return		 If Perforce is configured with two workspaces that have different root paths, Perforce SCC integration will fail in LabWindows/CVI.

Workaround: Ensure all workspaces have the same root path.

Reported Version: 9.0   Resolved Version: 2010   Added: 11/19/2010
211495

Return		 LabWindows/CVI function panel help is missing stylesheets and images in multibyte operating systems.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2010   Added: 11/22/2010
240876

Return		 Adding a space to the Menu bar constant prefix in the Edit Menu Bar dialog box causes the dialog box to close without warning.
None of your changes will be applied.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2010   Added: 11/22/2010
241552

Return		 LabWindows/CVI does not support offline files in Windows Vista and Windows 7.
If you do attempt to work with files in offline mode from LabWindows/CVI, your file might be deleted when you reconnect to the network.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2010   Added: 11/22/2010
248824

Return		 Using replace for a text selection may not always work.
The replace operation will only miss replacements on the last line of a selection and only if earlier replacements on that line push later matches on that line outside the range of the original selection. However, the same issue can occur on any line in the selection if the selection is made in column selection mode.

Workaround: N/A

Reported Version: 5.5   Resolved Version: 2010   Added: 11/22/2010
276026

Return		 LabWindows/CVI can generate code into the wrong source file without asking for confirmation.
The following steps will reproduce this issue:
  1. Create a new user interface project from template.
  2. Browse to a random example and open a source file from the random example.
  3. Open the UIR in the editor (but don't open the source file).
  4. Add a button with a callback to the UIR from the project.
  5. Select Code»Generate»Control Callbacks to generate the control callback.

Notice the callback and header files were placed in the unrelated example's source file.

Workaround: Ensure you always have zero or at least 2 source files open when generating code.

Reported Version: 8.5   Resolved Version: 2012   Added: 11/24/2010
283527

Return		 LabWindows/CVI carets ignore Windows keyboard settings.
Through the Keyboard Settings applet in the Windows Control Panel, you can adjust the blink rate of the caret, or you can disable blinking altogether. LabWindows/CVI ignores this setting.

Workaround: N/A

Reported Version: 5.0   Resolved Version: 2012   Added: 03/04/2011
283634

Return		 The LabWindows/CVI Visual Studio Conversion Wizard fails for some projects that reference National Instruments modular instruments drivers.
If the modular instruments driver references any files relative to IVI Standard Root, IVI Standard Root 64-bit,VXIPlug&Play 64-bit, or VXIPlug&Play kbase 64-bit, the LabWindows/CVI Conversion Wizard fails.

Workaround: Open the LabWindows/CVI .prj file in a text editor and change entries that look like the following:

Path Is Rel = True
Path Rel To = "IVI Standard Root"
Path Rel Path = "Drivers/niRFSG/niRFSG.fp"
Path = "/c/Program Files/IVI/Drivers/niRFSG/niRFSG.fp"

You should change to:

Path Is Rel = False
Path = "Full path to " 

Note that values in project files are limited to 82 characters (including the quotes), and if the path is going to exceed that amount, you'll need to split up the path into multiple lines.

Reported Version: 8.5   Resolved Version: 2010 SP1   Added: 03/04/2011
282253

Return		 Data tooltip is too small to hold negative zero floating-point values.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 03/09/2011
289949

Return		 Using an import library generated by MinGW results in "Bad COFF Library Member Header" error message.

Workaround: Open the header file that contains the function prototypes for the DLL in LabWindows/CVI. Then use theOptions»Generate DLL Import Library menu item to generate an import library for the DLL.

Reported Version: 8.5   Resolved Version: 2013   Added: 03/21/2011
289314

Return		 User-defined types always receive an asterisk when used as output types in function panels.
For instance, if you define a custom type as
typedef char[256] String255;
you would not want it to have an asterisk appended to it when used as an output type.

Workaround: N/A

Reported Version: 6.0   Resolved Version: N/A   Added: 03/24/2011
299674

Return		 Pasting unicode text into the LabWindows/CVI Source window can cause LabWindows/CVI to crash.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2010 SP1   Added: 07/28/2011
295507

Return		 Undoing after hiding and showing panels can cause LabWindows/CVI to crash.
The following steps will result in LabWindows/CVI crashing:
  1. Hide a panel containing a control.
  2. Show the panel.
  3. Move a control on the panel.
  4. Undo twice.


Workaround: N/A

Reported Version: 5.5   Resolved Version: 2012   Added: 07/30/2011
295654

Return		 Building a project with the same name as a previously loaded project can cause LabWindows/CVI to crash.
This crash can occur if you complete the following steps:
  1. Work on one project.
  2. Unload the project and delete all of its files.
  3. Create a new project with the same name.
LabWindows/CVI can crash when you try to build the second project.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 07/30/2011
296380

Return		 EVENT_SORT does not appear in the User Interface Editor.
If you interactively sort tree items in the User Interface Editor, the only event that appears in the status bar is EVENT_GOT_FOCUS. EVENT_SORT does not appear.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2012   Added: 07/30/2011
296381

Return		 You cannot use the Edit Text Tool to edit the last cell in a table column.
If you click after editing the last cell, it looks as if the value that you entered has been committed, but if you change to operate mode, or if you click on a different cell, you'll notice that the changes have been lost.

Workaround: Instead of clicking , click a different cell instead. Or, use the Edit Table dialog box instead of the Edit Text Tool to enter values in edit mode.

Reported Version: 8.0   Resolved Version: 2012   Added: 07/30/2011
294281

Return		 Making a change to a project that is under source code control in LabWindows/CVI does not result in checking out the project.
LabWindows/CVI does not acknowledge that the project has been checked out after making a change. This means that you are unable to save the project.

Workaround: Close and re-open the project. Then make your changes.

Reported Version: 8.5   Resolved Version: 2012   Added: 07/31/2011
294282

Return		 Files added to a project cannot be added to source code control.
When you add a file to a project under source code control (SCC), a dialog box will be shown asking if you want to add the file to SCC. If you select yes, you will be shown the file checkout dialog, but it is empty.

Workaround: Close and re-open the project. Then add the file to SCC.

Reported Version: 9.0   Resolved Version: 2012   Added: 07/31/2011
294650

Return		 Undo in the User Interface Editor can change the z-plane order of controls.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 07/31/2011
294008

Return		 New files added in the Edit Project dialog box do not use the Project Tree Font.
If you use a non-standard font for the Project Tree Font and add files to a project in the Edit Project dialog box, the new files will be drawn with the wrong font.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 08/01/2011
328823

Return		 Toolbox.c and toolbox.h are not added to a Microsoft Visual Studio project if LabWindows/CVI is not run at least once after installation.
N/A

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 01/09/2012
329035

Return		 LabWindows/CVI Conversion Wizard does not transfer 'Compile with precompiled include file' setting to 'Precompiled Headers' setting in Microsoft Visual Studio.

Workaround: N/A

Reported Version: 9.0   Resolved Version: N/A   Added: 01/09/2012
331534

Return		 The scroll bars in the User Interface Editor do not appear when changing the panel size using the cursor.
When you expands a panel to fill the User Interface Editor using the cursor and click the inside edge of the border of the panel, the panel border may be partially outside the editor. In this case the scroll bars do not appear and part of the panel is inaccessible.

Workaround: Move the panel and the scroll bars will appear properly.

Reported Version: 8.0   Resolved Version: 2012   Added: 01/09/2012
332047

Return		 LabWindows/CVI stops responding while searching for an inaccessible network location.
When LabWindows/CVI is searching for a file at a network location that is not available, the environment stops responding.

Workaround: The search times out after about 2 minutes and the environment will resume. Avoid attempts to access network locations that may not be available.

Reported Version: 8.5.1   Resolved Version: N/A   Added: 01/10/2012
311356

Return		 Changes to the font persist in the Font dialog box when the action is canceled.
If you make changes in the Font dialog box, but cancel your changes, the changes are not applied. However, if you open the Font dialog box again, the changes will still be active in the dialog box and will be applied if you then click OK. This behavior does not affect changes to the Source Window font.

Workaround: N/A

Reported Version: 7.1   Resolved Version: 2012   Added: 02/06/2012
311364

Return		 Function name displays twice in the function prototype tooltip when the return value is const or volatile.
N/A

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2013   Added: 02/06/2012
316626

Return		 The physdemo.cws example uses functionality that is removed with Security Update 5Q5FJ4QW.
The physdemo.cws example is not installed with LabWindows/CVI 2010 SP1 or later.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2012   Added: 02/09/2012
321793

Return		 Adding multiple files with the same name in the Edit Project dialog box can cause LabWindows/CVI to crash.
This behavior can occur if you use the Edit Project dialog box to add two files to the project with the same filename but different paths. When you select OK to confirm the changes, a warning will appear stating that a file with the same name already exists in the project. If you remove the duplicate file and click OK again, the development environment will crash.

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2012   Added: 02/09/2012
325813

Return		 The Replace File in Project option crashes the development environment if a file with same base name is specified.
Replacing a file in the Project Tree with another file that has the same base name using the Replace File in Project context menu option causes the development environment to crash.

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2012   Added: 02/10/2012
326195

Return		 The active function panel is incorrectly detected when multiple function panels are being edited in the Function Panel Editor window.
If you create multiple function panels in the Function Panel Editor and attempt to add a control to a panel other than the original, the control is not always added to the selected function panel.

Workaround: Select the original function panel then the function panel that you want to create a control on before adding a control.

Reported Version: 8.0   Resolved Version: 2012   Added: 02/10/2012
334683

Return		 The window number is displayed in the title bar of maximized windows when switching between tabbed and non-tabbed workspace.
N/A

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 02/14/2012
332690

Return		 The Source Window background is not painted gray when a non-tabbed workspace is opened.
If the Show tabbed Workspace option is disabled and you open LabWindows/CVI, the background of the Source Window is painted partially white. Moving windows across the white region causes them to be painted gray.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 02/15/2012
333571

Return		 Moving selected text in the Source window and then undoing offsets the original cursor position.
Selecting text and dragging it in a Source window moves the text to the new location. However, when this operation is undone, the input cursor is not restored to the correct location even though the text is still highlighted.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 02/15/2012
333983

Return		 Non project C files loaded by function panels are not unloaded when switching projects.
When loading a project or switching the active project in a workspace, the function panels that were explicitly loaded by the previous project (not the dependency Function Panels) are unloaded, but the corresponding non project C files remain linked.

Workaround: Restart LabWindows/CVI.

Reported Version: 6.0   Resolved Version: 2012   Added: 02/15/2012
334920

Return		 Corners of Source Editor windows are painted black in non-tabbed Workspace when opened.
When opening a workspace that has the Show Tabbed Workspace option disabled and at least one source code window open, the top corners of the Source Editor windows are painted black.

Workaround: N/A

Reported Version: 9.0   Resolved Version: N/A   Added: 02/15/2012
335301

Return		 Disabling tabbed workspace doesn't restore windows to their original unmaximized state.
N/A

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 02/15/2012
335499

Return		 Unmaximizing windows after loading a workspace leaves inactive windows without a number in front of the title in the title bar.
N/A

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 02/15/2012
361327

Return		 The CNVGetScalarDataValue function expects a char* only and not a char[ ] as described in the function help.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2012 SP1   Added: 07/18/2012
361958

Return		 The Project Tree does not auto-hide when a UIR file is opened.
Other file types do auto-hide the Project Tree. This behavior occurs only if you enable the Auto hide Project Tree and Library Tree option in the Environment dialog box.

Workaround: N/A

Reported Version: 9.0   Resolved Version: N/A   Added: 07/18/2012
354449

Return		 Very long strings in the Edit Distributions dialog box may crash LabWindows/CVI.
Many of the text fields in the Edit Distributions dialog boxes do not have string length limits. Strings that are too long for the field may cause the ADE to crash.

Workaround: Limit the Application Name to 50 characters, the registry keys relative paths to 255 characters, and registry values to 2048 characters.

Reported Version: 8.5   Resolved Version: 2013   Added: 07/20/2012
347511

Return		 Microsoft Visual Studio does not rebuild a LabWindows/CVI project if a UIR file changes but its header file does not.

Workaround: N/A

Reported Version: 8.0   Resolved Version: N/A   Added: 07/22/2012
347986

Return		 The Load UI resource file dialog box in the User Interface Localizer utility unloads the currently loaded localization.
If changes have been made in the loaded file, a dialog box prompts you to save.

Workaround: N/A

Reported Version: 8.0   Resolved Version: N/A   Added: 07/22/2012
352408

Return		 Pressing F1 on a function in the ActiveX Library or most of the Tools Libraries does not open the LabWindows/CVI Help to the topic for the specified function.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2013   Added: 07/22/2012
354450

Return		 Using a very long string when setting the value of a variable in the Variables window may crash the LabWindows/CVI environment.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2013   Added: 07/22/2012
354451

Return		 A very long string value in the Add/Edit Tools Menu Item dialog box may crash LabWindows/CVI.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2013   Added: 07/22/2012
354452

Return		 A very long string value in the Project folder or File Folder option of the New Project from Template or New File from Template dialog boxes may crash LabWindows/CVI.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2013   Added: 07/22/2012
337770

Return		 Setting LabWindows/CVI to "Run as administrator" will open a new instance of LabWindows/CVI each time you open a file associated with LabWindows/CVI.

Workaround: If you want to use LabWindows/CVI as administrator you can check the "Run as administrator" option from the Advanced button of the Shortcut tab instead of the Compatibility tab. You can access these options by right-clicking the LabWindows/CVI icon on your desktop and selecting Properties.

Reported Version: 8.5   Resolved Version: N/A   Added: 07/24/2012
333302

Return		 Auto Backup will provide an error if the file is marked as read-only.
This behavior is common if the file is stored in source control. Auto Backup may also take effect even if the file was not modified.

Workaround: Disable Auto Backup in Environment Options.

Reported Version: 8.0   Resolved Version: N/A   Added: 07/25/2012
344947

Return		 The LabWindows/CVI development environment crashes when you cut, copy, or delete a function panel tree item if it is the active item, but not selected.
The active tree item has a dotted border around it but is not highlighted in blue.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 07/25/2012
352775

Return		 Sorting an empty column in the Modules window causes an error.
The LabWindows/CVI environment will throw the "The index passed is out of range" error when a column is selected that has no items in it. This can happen when you are not debugging because the modules list is empty.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 07/25/2012
315800

Return		 The Find in files search will display a warning if a line it attempts to search is greater than 1024 characters.
Lines greater than 1024 characters are truncated at 1024 characters and the rest of the line is not searched. The warning does not provide any information on which file is causing the problem.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2012   Added: 07/26/2012
333273

Return		 Using column selection mode in the Source window over a collapsed region of code will cause the region to be improperly selected.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012   Added: 07/26/2012
333324

Return		 Function panel controls in a disabled function may not be dimmed when the function panel is reopened for editing.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 07/26/2012
336446

Return		 Entering more than 255 characters into the Line Label or Bus Label fields of the Edit Digital Graph dialog box will cause the LabWindows/CVI environment to crash.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 07/26/2012
336721

Return		 Switching the active application while a control is being moved by the mouse causes the selection outline to not be undrawn.
This behavior occurs if you press while dragging a control.

Workaround: Minimize and then maximize the LabWindows/CVI environment to remove the drawing errors.

Reported Version: 8.0   Resolved Version: 2012   Added: 07/26/2012
338093

Return		 Not moving the mouse when using Zoom to rectangle mode triggers EVENT_ZOOM with ZOOM_RESTORE for the eventdata1parameter of the callback.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2012   Added: 07/26/2012
341151

Return		 Workspace folders with very long names can cause the LabWindows/CVI environment to crash when loading or saving.

Workaround: Avoid workspace folder names with over 100 characters.

Reported Version: 8.0   Resolved Version: 2012   Added: 07/26/2012
373262

Return		 The Ini_WriteToRegistry and Ini_ReadFromRegistry function panels incorrectly list OS compatibility as Windows 9x/NT/2000.
Both functions are available in Windows XP and later.

Workaround: N/A

Reported Version: 5.5   Resolved Version: 2012 SP1   Added: 10/04/2012
386081

Return		 Items in the Resource Tracking window can be expanded only if they contain at least two items.
The Expand Resource and Collapse Resource items of the Resource Tracking window context menu are dimmed unless the resource category has at least two items in it.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2013   Added: 02/19/2013
369682

Return		 Once the value of the File name field of the New File from Template dialog box is changed, the File path field does not change extension if the file type is changed.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2013   Added: 02/21/2013
370519

Return		 The LabWindows/CVI environment crashes when setting a string in the Array Display window to hexadecimal format while debugging a LabWindows/CVI application.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012 SP1   Added: 02/21/2013
371022

Return		 The LabWindows/CVI environment crashes when entering a path instead of an IP address in the New Remote Debugging Target dialog box.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2012 SP1   Added: 02/21/2013
388073

Return		 The Show Prototype tooltip displays the help button for macros when the previous Show Prototype tooltip was for a function with help documentation.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 02/21/2013
368470

Return		 The wrong text is selected after dragging multiple lines of text in the Source window into the middle of another line of text.
When multiple lines of text are dragged into another line of text, the text selection will extend to include characters that were not previously selected.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 08/05/2013
386160

Return		 Cannot load attribute info for a .fp file when the associated .sub file is encoded as Unicode.

Workaround:
  1. Open the .sub file in text editor that allows for conversion of encodings.
  2. Convert the encoding to ANSI.


Reported Version: 6.0   Resolved Version: 2013   Added: 08/05/2013
387331

Return		 Clearing a window in the Output Region causes the item to be dimmed in the Window menu.
If a window is cleared using the Clear Window option in the context menu, the item is dimmed in the Window menu and cannot be re-opened if closed.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2013   Added: 08/05/2013
391055

Return		 Auto indent does not place the cursor in the correct location when pressing the Enter key after a break in a switch statement.
Inside a switch statement, when you press the Enter key following a break; statement, you most likely want to start a new case statement, which should be indented one level less than the break statement. However, LabWindows/CVI auto indent starts the new line at the same level as the break statement.

Workaround: N/A

Reported Version: 7.1   Resolved Version: 2013   Added: 08/05/2013
392932

Return		 Documentation generated for variadic functions does not display variable parameter in function prototype.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 08/05/2013
399264

Return		 The Find command may miss some search matches if the Whole word option is enabled.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2013   Added: 08/05/2013
403645

Return		 LabWindows/CVI might crash when declaring a variable for the Attribute Value parameter of some attribute accessor functions.
For example if you use the Declare Variable option to declare a variable for the last parameter of theIvi_GetAttributeViBoolean function, LabWindows/CVI will crash. This issue occurs only for functions where there is a parameter in between the attributeID and the attributeValue parameters.

Workaround: N/A

Reported Version: 7.1   Resolved Version: 2013   Added: 08/05/2013
407329

Return		 Selecting Rebuild from the Batch Build dialog box causes a memory leak.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2013   Added: 08/05/2013
408295

Return		 Source files with several while loops may cause LabWindows/CVI to hang while scrolling the source file.

Workaround: N/A

Reported Version: 8.5.1   Resolved Version: 2013   Added: 08/05/2013
408324

Return		 LabWindows/CVI will crash when you click the selection button for a ring control while editing a function panel.
The selection button should not be displayed while the function panel is in edit mode. In some cases, the button will appear in edit mode, and LabWindows/CVI will crash if it is clicked.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2013   Added: 08/05/2013
Hardware
142035

Return		 Some LabWindows/CVI GPIB functions return positive values if the GPIB driver is not installed.
The functions this bug affects are ibdev, OpenDev, CloseDev, and CloseInstrDevs. If the GPIB driver is not installed, these functions should return negative values according to the documentation, but instead they return 0x8000 (theibsta value indicating that an error occurred).

Workaround: You can workaround this by checking if the return value is 0x8000 (ERR), and if so, check the value ofiberr. You can also ignore the return value and check if ibsta has the ERR bit set after the function returns.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
171624

Return		 CPU usage can spike when using ComRdTerm.

Workaround: Set the timeout to zero using SetComTime and poll until the termination byte occurs.

Reported Version: 6.0   Resolved Version: 2010   Added: 05/05/2010
201013

Return		 OpenComConfig does not return an error if the configuration parameters are invalid.

Workaround: N/A

Reported Version: 5.5   Resolved Version: 2009 SP1   Added: 05/05/2010
201130

Return		 Calling OpenComConfig with an input queue size greater than 40960 bytes results in unexpected behavior on Windows.
An input queue size greater than 40960 bytes causes an error in the Windows serial driver, leading to the port being opened with default settings. LabWindows/CVI does not return an error when this happens.

Workaround: Do not use an input queue size that is greater than 40960 bytes

Reported Version: 5.5   Resolved Version: 2009 SP1   Added: 05/05/2010
Installer
128084

Return		 Uninstalling LabWindows/CVI from Windows Vista does not completely remove context menu file associations.

Workaround: N/A

Reported Version: 9.0   Resolved Version: N/A   Added: 05/05/2010
149929

Return		 Uninstalling LabWindows/CVI 9.0 may cause some non-NI software to quit working.
For more information, refer to KB 4V57TIXU.

Workaround: KB 4V57TIXU.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
177971

Return		 Creating an installer spec file fails if a Microsoft Visual Studio 2008 wizard is explicitly included
Creating new spec file by passing the /generateSpecFile flag to setup.exe will not allow you to finish if you explicitly select Microsoft Visual Studio 2008 integration.

Workaround: Manually modify the spec file located in the support files directory of the installation media.

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
334574

Return		 Installing multiple versions of LabWindows/CVI on the same system can cause the wrong versions of the LabWindows/CVI Help to be associated with the development environment.
N/A

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2012   Added: 02/15/2012
Performance
129094

Return		 Asynchronous timer limited to intervals no greater than approximately 429 seconds.

Workaround: Split intervals of greater than 429 seconds into smaller intervals.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
129812

Return		 Calling a LabVIEW-built DLL causes the printf family of functions to format a double to a string incorrectly.
A string that should appear as 36010.000MHZ may instead appear as 3600:.000MHZ.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
139658

Return		 GetFileSize can crash if you pass a path that is too long.

Workaround: Make sure the file path size is less than 260 bytes before calling this function.

Reported Version: 7.1.1   Resolved Version: 2009   Added: 05/05/2010
144368

Return		 strtod and scanf can crash in multithreaded applications.

Workaround: Use locks from the Utility Library around every call to strtod or to the scanf family of functions.

Reported Version: 8.1   Resolved Version: 9.0.1   Added: 05/05/2010
144640

Return		 LabWindows/CVI MAX_PATHNAME_LEN is more restrictive than Windows ANSI path limitation in multibyte systems.

Workaround: N/A

Reported Version: 7.1.1   Resolved Version: N/A   Added: 05/05/2010
144806

Return		 CmtWaitForThreadPoolFunctionCompletion can hang in some rare circumstances.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
155155

Return		 If you enable the Compile with precompiled include file option, LabWindows/CVI may occasionally crash when you view data tooltips during debugging.

Workaround: Disable precompiled headers.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
157141

Return		 A memory leak occurs in the thread-safe queue.

Workaround: The leak does not occur under release builds.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
162398

Return		 Toolbox lists can grow by amounts greater than the allocation policy specifies.
N/A

Workaround: Change the definition of NUMITEMSPERALLOC in toolbox.c from
#define NUMITEMSPERALLOC(list) Max(((*list)->listSize * ((*list)->percentIncrease + 100)) / 100 , (*list)->minNumItemsIncrease)
to
#define NUMITEMSPERALLOC(list) Max(((*list)->listSize * ((*list)->percentIncrease + 100)) / 100 - (*list)->listSize, (*list)->minNumItemsIncrease)

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
167239

Return		 LabWindows/CVI can hang while editing a large non-source code data file.

Workaround: Waiting long enough will often resolve the hang.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
175150

Return		 LabWindows/CVI can crash when opening a .c file containing lines with exactly 1020 characters.

Workaround: Do not create source files with lines exactly 1020 characters long.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
182036

Return		 CreateUDPChannelConfig fails if ws2_32.dll is installed to the application directory.

Workaround: Remove ws2_32.dll from the application directory after making sure it resides in one of the other system paths.

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
184428

Return		 LabWindows/CVI applications can crash when calling the Delay function from multiple threads.

Workaround: Use the Sleep function from the Interface to the Win32 API.

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
191778

Return		 Passing NULL to the Data_Buffer or Data_Length parameters of RegEnumerateValue results in a General Protection Fault.

Workaround: N/A

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
191841

Return		 Matrix operations that use the Intel MKL on Windows have slight numerical differences between LabWindows/CVI 2009 and previous versions of LabWindows/CVI.
LabWindows/CVI 2009 uses the latest version of the Intel Math Kernel Library (MKL) to accelerate linear algebra operations under the Windows operating system. Some functions in the Intel MKL return minor differences in the result than previous versions of MKL due to higher optimization, causing slight numerical differences between results in functions in LabWindows/CVI 2009 and previous versions of LabWindows/CVI. This issue affects Vector and Matrix Algebra, Statistics, and Curve Fitting functions in LabWindows/CVI.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
196430

Return		 Large static arrays declared in a block scope can cause a stack overflow if Detect uninitialized local variables at run time is selected.

Workaround: Disable the Detect uninitialized local variables at run time option in the Build Options dialog box.

Reported Version: 8.5   Resolved Version: 2009 SP1   Added: 05/05/2010
197427

Return		 NIReport_GetPrinters has a small memory leak.
Each time the function NIReport_GetPrinters is called, a small amount of memory is leaked. The size of the leak depends on the number of installed printers and the length of the printer names.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2010   Added: 05/05/2010
201259

Return		 Calling RegisterWinMsgCallback and UnRegisterWinMsgCallback from multiple threads may result in a crash.

Workaround: Synchronize via locks or critical sections calls to both RegisterWinMsgCallback andUnregisterWinMsgCallback.

Reported Version: 8.5   Resolved Version: 2009 SP1   Added: 05/05/2010
215744

Return		 Calling CNVData functions in network variable callbacks can cause hangs.
Calling any of the CNVData functions in network variable callbacks may result in a hang if multiple threads are writing through a single shared CNVWriter object.

Workaround: Call the function PostDeferredCallToThread immediately upon entering a network variable callback. Construct a data structure to pass all the necessary elements to the callback routine to be executed on the main thread.

Reported Version: 9.0   Resolved Version: 2010   Added: 05/05/2010
41414
4DDCC0IO

Return		 A small memory leak exists in network variable creation.
Explicitly creating network variables results in a memory leak of approximately 50 bytes per variable that is created.

Workaround: Consider using implicitly created network variables if you are creating and deleting numerous network variables over a long period of time.

Reported Version: 8.5   Resolved Version: N/A   Added: 05/05/2010
218499

Return		 Calling GetTCPPeerName with an invalid handle can cause the application to hang.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2009 SP1   Added: 09/17/2010
233510

Return		 Ini_GetInt64 doesn't return –5021 (Invalid integer) for numbers greater than LLONG_MAX.
Instead of returning an error, the function succeeds and returns LLONG_MAX.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2010   Added: 09/17/2010
256901

Return		 Passing a pointer to a custom data type to a function that takes a void * will leak memory in a debug build.
LabWindows/CVI user protection leaks memory when a pointer to a user defined data type is passed to a function with a void * parameter. An example of this would be calling the function ListInsertItem and passing a pointer to a user defined data type to the PointerToItem parameter.

Workaround: Disable user protection, or build the program in a Release configuration.

Reported Version: 9.0   Resolved Version: N/A   Added: 11/15/2010
258354

Return		 CNVProcessIsRunning may incorrectly report that the process is running if the program is run as a startup program.
CNVProcessIsRunning checks only if the process is configured to run when the Variable Engine is started. In most cases, this check is a good indicator of whether the process is running because the Variable Engine--a Windows service that automatically starts when Windows starts--loads all the processes configured to run.

Workaround: Try to browse to the process using the functions in the Browser Functions class of the Network Variable Library. If you are able to browse to the process using CNVBrowse, the process is running. The following code is an example of browsing to a process: 
CNVBrowser browser;
CNVCreateBrowser(&browser);
CNVBrowse("\\\\localhost\\your-process-name");
CNVDisposeBrowser(browser);


Reported Version: 9.0   Resolved Version: 2010 SP1   Added: 11/17/2010
253304

Return		 TDMS Files with very high channel counts might be slow to open.

Workaround: N/A

Reported Version: 8.1   Resolved Version: 2010 SP1   Added: 11/19/2010
246218

Return		 The numElements parameter of the DefineThreadSafeArrayVar macro is not expression-tolerant.

Workaround: Wrap your expression in parentheses when calling DefineThreadSafeArrayVar.

Reported Version: 8.0   Resolved Version: 2010   Added: 11/22/2010
285443

Return		 The run-time movable custom control (movectrl.fp) leaks memory.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2012   Added: 03/09/2011
290737

Return		 InetSendMail can crash if the "To:" field exceeds 250 bytes.

Workaround: If the "To:" field is longer than 250 bytes because you need to email multiple people, call theInetSendMail function multiple times so that the "To:" field doesn't exceed 250 bytes.

Reported Version: 7.1   Resolved Version: 2010 SP1   Added: 03/24/2011
298456

Return		 A program that has called EnableDragAndDrop might crash if closed from the Windows taskbar.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2012   Added: 07/28/2011
292992

Return		 Users cannot completely disallow creating directories in FileSelectPopup and DirSelectPopup.
If you pass 0 as the AllowMakeDirectory parameter of FileSelectPopup or DirSelectPopup, the icon for creating a folder is not present in the dialog box. However, users can still right-click the file list and select New»Folder.

Workaround: N/A

Reported Version: 8.0   Resolved Version: 2012   Added: 08/01/2011
314876

Return		 The LabWindows/CVI Run-Time Engine can hang when calling CloseCVIRTE in a secondary thread.
The CloseCVIRTE function can cause a hang if called from a thread other than the main thread.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2012   Added: 02/08/2012
335299

Return		 Multiple calls to ClipboardPutBitmap in a multithreaded application causes temporary hang.
Calling the ClipboardPutBitmap function from a thread other than the main thread can cause a temporary hang.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2012   Added: 02/14/2012
356348

Return		 Using the TCP Library from multiple threads may cause a deadlock when combined with locks in the user's TCP callbacks.

Workaround: N/A

Reported Version: 7.0   Resolved Version: 2013   Added: 07/20/2012
339884

Return		 When allocating memory with malloc, LabWindows/CVI will truncate the memory allocated to be an integer multiple of the size of the pointer data type.
You cannot allocate a large memory block and then manually split it into smaller blocks. If you do, you may receive run-time errors.

Workaround: N/A

Reported Version: 6.0   Resolved Version: 2013   Added: 07/22/2012
355436

Return		 The InetTelnetOpen function limits connections to 100.
If you exceed this limit, a non-fatal run-time error occurs.

Workaround: N/A

Reported Version: 7.1.1   Resolved Version: 2012   Added: 07/25/2012
343157

Return		 Calling the GetFileAttrs function with an improperly formed path and a non-existent drive may cause a crash.
Calling GetFileAttrs function with z:\test.txt as input for the first parameter will cause a crash. This is because there should be two slashes in the path string and because the z drive does not exist.

Workaround: Using two slashes will prevent the application from crashing.

Reported Version: 8.5   Resolved Version: 2012   Added: 08/13/2012
390072

Return		 A memory leak occurs in the FileBrowser_GetSelectedFiles function when no files are selected or an error occurs

Workaround: The source code for this library is installed with LabWindows/CVI and can be edited by a user.
  1. Right-click the File Browser instrument driver in the Library Tree and select Edit Instrument.
  2. Click Attach and Edit Source in the Edit Instrument dialog box. This option opens FileBrowser.c in the Source window.
  3. Locate the FileBrowser_GetSelectedFiles function in the source file.
  4. In the case statement for numSelected < 1, replace the return statement with goto Error;.
  5. Move the Error: label before ListDispose(list).
  6. Build FileBrowser.c.


Reported Version: 7.0   Resolved Version: 2013   Added: 08/05/2013
397059

Return		 The GetMonitor functions fail if the monitor configuration changes.
When the monitor configuration of the system changes (e.g. unplugging a monitor from a system with multiple monitors), GetMonitorFromPoint, GetMonitorFromRect, and GetMonitorFromPanel always return a value of 1 for the monitor ID.

Workaround: N/A

Reported Version: 5.5   Resolved Version: 2013   Added: 08/05/2013
Stand-Alone Applications and Distributions
130423

Return		 The .NET Library cannot be included in a distribution without also including the full run-time engine.
You also cannot install the .NET Library if you are privately installing the LabWindows/CVI Run-Time Engine.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
131196

Return		 The Import Measurement & Automation Explorer (MAX) Configuration File checkbox is always checked on the Advanced tab of the Edit Installer dialog box.
This happens when reloading the distribution settings from a .cds file. As long as the config file path is empty, the build behavior is not actually affected.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
137318

Return		 Adding dependencies of an executable to the Installation Files & Directories section in the Edit Installer dialog box displays two copies of the DLL.

Workaround: Re-open the Edit Installer dialog box.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
141434

Return		 LabWindows/CVI crashes when unloading a workspace with an ActiveX server project after building a distribution.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
154605

Return		 Projects with a relative path for the application file can crash when configuring a distribution.

Workaround: Ensure that the Target Settings dialog box specifies a full, absolute path for the project output file rather than just a filename. Specifically check the Release configuration.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
182036

Return		 CreateUDPChannelConfig fails if ws2_32.dll is installed to the application directory.

Workaround: Remove ws2_32.dll from the application directory after making sure it resides in one of the other system paths.

Reported Version: 9.0.1   Resolved Version: 2009   Added: 05/05/2010
186565

Return		 LabWindows/CVI distributions cannot install fonts on Windows Vista or Windows 7.

Workaround: N/A

Reported Version: 8.5   Resolved Version: N/A   Added: 05/05/2010
292521

Return		 An application whose installer includes only the "Network Variable Support" sub-item might run slower than expected on a minimally configured target computer.
Under this scenario, the components necessary for LogosXT are not installed.

Workaround: Distribute the entire LabWindows/CVI Run-Time Engine.

Reported Version: 8.5   Resolved Version: 2010 SP1   Added: 08/01/2011
292805

Return		 An application whose installer includes only the "Network Variable Support" sub-item might not run correctly on a minimally configured target computer.

Workaround: Distribute the entire LabWindows/CVI Run-Time Engine.

Reported Version: 8.5.1   Resolved Version: 2010 SP1   Added: 08/01/2011
312179

Return		 Some Microsoft DLLs are automatically included in distributions built with LabWindows/CVI.
Some Microsoft dependencies are operating system dependent and should not be included in distributions. These dependencies typically already exist on most targets. If not, then they should be installed from a Microsoft distribution.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2012   Added: 02/06/2012
316361

Return		 The LabWindows/CVI low-level support driver CVINTDRV.sys contains a security vulnerability.
Refer to KnowledgeBase 5Q5FJ4QW: How Does National Instruments Security Update 5Q5FJ4QW Affect Me? for more details.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2012   Added: 02/08/2012
354481

Return		 User specified icons are not displayed in Windows Explorer for larger sizes in Windows Vista/7.
In certain situations, the icon displayed may be a cached icon rather than the icon you have specified.

Workaround: Follow the instructions in KnowledgeBase 5A6C270U: Cannot Update Custom Icon of an Executable in Windows 7 or Vista to remove the cached icon.

Reported Version: 8.5   Resolved Version: N/A   Added: 07/22/2012
369355

Return		 Applications that use the DIAdem Connectivity Library that are installed using a distribution built in LabWindows/CVI might generate run-time errors related to the Microsoft Visual C++ 2005 run-time not being installed.
This issue occurs with distributions that include the DIAdem Connectivity Library support by selecting the NI USI component in the Edit Installers dialog box, but do not include the full LabWindows/CVI Run-Time Engine.

Workaround: Either include the full LabWindows/CVI Run-Time Engine in the distribution, or download and install the Microsoft Visual C++ 2005 Redistributable package from the Microsoft website.

Reported Version: 7.1   Resolved Version: 2012 SP1   Added: 02/21/2013
369915

Return		 Creating a distribution for a project that uses the DataSocket Library does not automatically check the NI DataSocket 5.0 option in the Drivers & Components tab of the Edit Installer dialog box.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2013   Added: 02/21/2013
384581

Return		 The GetExternalModuleAddrEx function fails to load a DLL if it is not in the current working directory or the system path.
If you load a import library that is located in a different path using the LoadExternalModuleEx function, theGetExternalModuleAddrEx function will not be able to locate the DLL if it is in the same path as the import library.

Workaround: Make sure the DLL is in a directory where the system can locate it (e.g., the current working directory or the system path).

Reported Version: 8.5   Resolved Version: 2013   Added: 08/05/2013
396825

Return		 The default value for the Publisher option on General tab of the Edit Installers dialog box is "%company".
This value is not evaluated and the publisher appears as "%company".

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2013   Added: 08/05/2013
User Interface
101593

Return		 Strip chart scroll bar overlaps the plot area.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 2009   Added: 05/05/2010
126708

Return		 PlotArc lacks accuracy for drawing a small angle with a large radius.

Workaround: N/A

Reported Version: 8.5.1   Resolved Version: N/A   Added: 05/05/2010
129832

Return		 Editing multiple controls changes tab order and z-plane order.

Workaround: N/A

Reported Version: 8.5   Resolved Version: 9.0.1   Added: 05/05/2010
131102

Return		 On Windows Vista, file selection dialog boxes add an extra backslash (\) character when selecting a file at the root of a volume.

Workaround: N/A

Reported Version: 8.5.1   Resolved Version: 9.0.1   Added: 05/05/2010
131413

Return		 After widening the inc/dec arrows, the entire area of the arrows is not clickable.
This bug will only manifest itself if the left edge of the control label does not extend all the way to the left edge of the inc/dec arrows.

Workaround: If a label is not needed for the control, the user can add a label and then move it off screen programmatically using the ATTR_LABEL_LEFT and ATTR_LABEL_TOP attributes. The idea is to move it up and left far enough that it always is off screen, thereby ensuring the label always extends past the left edge of the inc/dec arrows.

Reported Version: 8.5   Resolved Version: 9.0.1   Added: 05/05/2010
134165

Return		 Menu bar does not resize when using the Scale Contents On Resize or Resolution Adjustment options.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
135032

Return		 Checkerboard dimming of controls is leaving label text etched.
The system attribute ATTR_USE_CHECKERBOARD_DIMMING was introduced to restore the LabWindows/CVI 7.1 control dimming behavior. However, because the label text remained etched, it did not fully restore the LabWindows/CVI 7.1 control dimming behavior.

Workaround: N/A

Reported Version: 8.5.1   Resolved Version: 9.0.1   Added: 05/05/2010
135264

Return		 The Done button can disappear when you resize a file selection dialog box.

Workaround: Size the file selection dialog until the Done button shows.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
136678

Return		 Menu events cause a crash if there is no menu callback specified and the application has a main callback.

Workaround: Create and use an empty callback function for the popup menu items.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
138050

Return		 The Remove All button in the multi-file selection dialog box is missing a corner.

Workaround: Resize the dialog box to display the missing corner.

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
139151

Return		 Debugger does not always catch incorrect use of ATTR_COPY_ORIGINAL_DATA.
If ATTR_COPY_ORIGINAL_DATA is set to 0 and the data buffer is deallocated before the graph control is done using it, a program may crash without any explanation from the debugger.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
139269

Return		 Hidden tab pages of a nested tab control can be made active.
Controls with tooltips can cause hidden tab pages to display if the hidden tab page was the last active tab.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 2009   Added: 05/05/2010
140926

Return		 Changing the axis range on a LabWindows/CVI graph plot with few points causes skewed plot lines.
Due to rounding errors, as points move further off screen, the plot lines become less accurate.

Workaround: Provide more points for your plot, or constrain the range of the graph in question.

Reported Version: 5.5   Resolved Version: N/A   Added: 05/05/2010
143075

Return		 Table and tree controls do not scale proportionally to other controls.
The Scale Contents On Resize option does not work correctly with table and tree controls.

Workaround: N/A

Reported Version: 9.0   Resolved Version: 9.0.1   Added: 05/05/2010
145322

Return		 Graph y-axis name not drawn correctly after graph changes position before being displayed.

Workaround: After resizing the

你可能感兴趣的:(LABWINDOWES,CVI)

  • SAP_ABAP_JAVA 系统调用SAP系统 RFC , 实战案例之——供应商主数据(员工信息)同步| Java jco | BP| BAPI |RFC_CVI_EI_INBOUND_MAIN Terry谈企业数字化 Abap编程Java编程SAPABAPJAVAJCO
    SAPABAP顾问（开发工程师）能力模型_Terry谈企业数字化的博客-CSDN博客文章浏览阅读423次。目标：基于对SAPabap顾问能力模型的梳理，给一年左右经验的abaper快速成长为三年经验提参考ALV/REPORT|SMARTFROM|SCREEN|OLE|BAPI|BDC|PI|IDOC|RFC|API|WEBSERVICE|Enhancement|UserExits|Badi|Deb
  • Autosar-Mentor CVI工具诊断配置 诊断协议那些事儿 Autosar-CP车载系统经验分享
    Autosar诊断-简介和功能概述Autosar诊断-DCM模块内的子模块Autosar诊断-DSL（DiagnosticSessionLayer）Autosar诊断-DSD（DiagnosticServiceDispatcher）Autosar诊断-DSP（DiagnosticServiceProcessing）文章目录一、ImportingaPDXFile限制和局限性：先决条件：二、使用步骤<
  • Labwindows打包制作Setup安装程序的步骤 小坏坏_ ARM
    CVI开发的程序如果在没有安装CVI开发平台的PC上运行，一般有以下几种方法：(原帖http://blog.sina.com.cn/u/2267289007转载请注明)1），将编译好的EXE文件和相关文件copy到目标PC的指定文件夹，将CVI的绿色运行库copy到目标PC的上述EXE文件所在的文件夹中，手动自己建所需的快捷。2），在目标PC上安装NI的RunTimeEngine(不是RealTi
  • XS9922B-国产cvi协议，满足国内车载视频传输领域国产化降本需求 Yyq13020869682 芯昇电子音视频
    XS9922B是一款4通道模拟复合视频解码芯片，支持HDCCTV高清协议和CVBS标清协议，视频制式支持720P/1080P高清制式和960H/D1标清制式。芯片将接收到的高清模拟复合视频信号经过模数转化，视频解码以及2D图像处理之后，转化为YCbCr，并以MIPICSI接口传输给主控编码芯片。XS9922B内嵌高音质音频Codec，集成了3-CHMIC输入、2-CHLineIn输入和1-CHLi
  • 初识Kubernetes 曲终--人散 kubernetesjava运维
    1、Kubernetes主要由以下几个核心组件组成etcd保存了整个集群的状态apiserver提供资源操作的唯一入口，提供认证，授权，访问控制，api注册和发现等机制controllermanager负责维护集群的状态，比如故障检测，自动扩展，滚动更新等scheduler负责资源调度，按照预定的调度策略将pod调度到相应的机器kubelet负责维护容器的生命周期，同时也负责Volume（CVI）
  • 【NI-DAQmx入门】NI-DAQmx之C、C++、VB、VB.net与C#支持 東方神山 数据采集【DataAcquisition】c++.netc#labview
    DAQmx应用程序编程接口(API)DAQmx附带数据采集编程所需的API。DAQmxAPI只是一组库，其中包含关于如何执行所有数据采集操作的函数。这些API支持LabWindows/CVI、C、C++、VisualBasic6.0、VB.NET和C#。DAQmxAPI随DAQmx驱动程序一起安装，包含以下参考手册：NI-DAQmxC参考帮助NI-DAQmxCAPIVisualBasic6.0帮助
  • NI-DAQ Win10+QT+Cmake 开发环境搭建 AoDeLuo c++QTqtc++
    文章目录一.安装DAQ采集卡驱动二.NIMAX软件的使用三.QT利用Cmake构建工具搭建NIDAQ开发环境一.安装DAQ采集卡驱动到NI官网，选择技术支持，软件下载搜索DAQ-mxNI测量设备均附带NI-DAQmx驱动软件。NI-DAQmx驱动软件是一个用途广泛的库，可从LabVIEW或LabWindows/CVI中调用库函数，对NI设备编程。测量设备包括各种DAQ设备，如E系列多功能I/O(M
  • Carsim安装过程中出现 “CVI老版本”错误，解决方案 跟罗老师学机械 Carsimvscode
    安装过程中关闭杀毒软件和windows自带的defender，正常安装后出现以下错误，打不开carsim软件。这里显示CVI是老版本要修复，点击“是”后：修复失败！！！解决方案：（注意重新安装的时候要把文件删除干净）更新到最新版本的CVI，你的电脑里应该安装有LABView在电脑里找到如下路径：C:\ProgramFiles(x86)\NationalInstruments\Shared\NIUn
  • [RISC-V]Milk-V开发板 i2c测试oled及波形输出 darcsdn rsic-vlinuxrisc-v智能传感器
    I2C3引脚图修改i2c3复用功能build\boards\cv180x\cv1800b_sophpi_duo_sd\u-boot\cvi_board_init.c//I2C3pin67PINMUX_CONFIG(SD1_CMD,IIC3_SCL);PINMUX_CONFIG(SD1_CLK,IIC3_SDA);扫描I2C3上的设备[root@cvitek]~#i2cdetect-y-r30123
  • static关键字在C语言中的作用 m0_74712453 C语言学习笔记c++开发语言c语言
    static关键字有三个主要作用：1.修饰全局变量2.修饰函数3.修饰局部变量(1)首先是修饰全局变量，就是变量只能在本文件中使用，不能在其他文件中使用代码示例：vi1.cvi2.c编译：gcc1.c2.c-omain./main编译结果：假设用上static关键字编译出错：因为num被static修饰，只能在1.c文件中使用（2）其次，可以用static修饰函数，作用也差不多，函数只能在本文件中
  • UHD 4K 800万AHD产品 ipc_name
    一个月前写过一篇《模拟高清摄像机的最新技术动态》，当时主推AHD方案的雄迈还只有最高5.0MP的AHD产品。没想到一个月不到，在雄迈的官网上发现了8.0MP的AHDDVR后端。这是款4路8.0MPAHD/TVI/CVI/XVI/CVBS/IP混合DVR，最大支持UHD4K8.0MPAHD接入，处理器用的是Hi3521D，AHD的接收芯片网站没介绍，但是估计使用的应该是nextchip的NVP615
  • 绒言绒语：CVI助力餐饮业突破红海市场，或将成为新的拐点 一只哈士球
    餐饮行业市场竞争已成白热化，而IP主题餐厅生意却异常火爆！民以食为天，中国的餐饮文化享誉世界，发展到当代，它已经从单纯的味觉感受上升到了视觉感官和情感体验。近些年在中国的餐饮市场中盛行着各种国外的人气IP：制霸了我们朋友圈的Hellokitty主题餐厅，成为网红打卡圣地；开业前期，门外长队绵延长达几个月之久的上海熊本熊咖啡店；熊本熊咖啡上海开业的排队盛况（图片来自网络）以及排队1小时仅到门口的Li
  • 【可解释】|弱监督定位 rrr2 可解释人工智能
    https://github.com/jbeomlee93/AdvCAMhttps://github.com/zhaozhengChen/ReCAMhttps://github.com/shaofeifei11/CI-CAMhttps://github.com/CVI-SZU/CCAMhttps://github.com/weixuansun/infercamhttps://github.com/
  • (CVPR2022) 跨语言图像弱监督语义分割CLIMS Sierkinhane 计算机视觉
    开源仓库：https://github.com/CVI-SZU/CLIMSCLIMS:CrossLanguageImageMatchingforWeaklySupervisedSemanticSegmentation图1CAM与CLIMS的对比图摘要：众所周知，类别激活图（ClassActivationMap,CAM)通常只激活物体的判别性区域并且包含了许多与物体相关的背景误激活。仅有图像级标注信
  • cvi实现一键截图 襟湿容颜 cvi
    intCVICALLBACKsreenget(intpanel,intcontrol,intevent,void*callbackData,inteventData1,inteventData2){charfilePath[500];switch(event){caseEVENT_COMMIT:FileSelectPopup("c:\\Users\\Administrator\\Desktop",
  • SAP S4HANA BP初探 喜欢打酱油的老鸟 SAP文章SAPS4HANABP
    SAPS4HANABP初探ECC中客户和供应商是分开管理的，这种模式具有部分局限性：a)客户和供应商不能是同一实体关系，建两个主数据会造成数据的冗余。b)客户/供应商只能有一个地址。c)属性无时间相关性。SAPS4HANA中使用BP业务伙伴模型解决这个问题(代替了传统的FD01/VD01/FK01/XK01)。优点如下：一个业务伙伴可用有多个角色，时间相关属性，同一数据架构，减少数据冗余，CVI模
  • 同轴高清技术---AHD/HD-CVI/HD-SDI/HD-TVI free-xx camera模拟高清AHDCVITVISDI
    同轴高清技术主要有以下四种：模拟高清技术（AHD）、高清复合视频接口技术（HD-CVI）、高清串行数字接口技术（HD-SDI）以及高清传输视频接口技术（HD-TVI）。1.AHD技术最初由为视频安全性市场提供芯片组的韩国设计公司Nextchip开发，该技术通过使用均衡器而能够在同轴和非屏蔽双绞线（UTP）上实现最大500米的数据传输距离。AHD利用先进的压缩算法和信号滤波技术，可以30帧/秒（fp
  • GNN图神经网络学习【记录】 Ray Song GNN图神经网络GNN图神经网络
    视频讲解链接-李沐B站教程：GNN从入门到精通https://www.bilibili.com/video/BV1K5411H7EQ/?vd_source=d4df260b1907b7a2424f450d404e1eba博客链接：https://distill.pub/2021/gnn-intro/笔记链接：https://www.bilibili.com/h5/note-app/view?cvi
  • 【论文阅读】Cross Language Image Matching for Weakly Supervised Semantic Segmentation 阿委困的不能行 论文阅读深度学习人工智能
    这篇论文是CLIP模型较早的在弱监督分割上应用的论文。论文标题：CrossLanguageImageMatchingforWeaklySupervisedSemanticSegmentation作者信息：代码地址：https://github.com/CVI-SZU/CLIMSAbstract（CAM的缺点）CAM只激活个别类别的对象区域，并且经常错误的把很多相似的区域也包含进来。（WSSS的缺点
  • kubernetes 2022-05-05 陪伴是最长情的告白
    一、核心组件·etcd保存了整个集群的状态·apiserver提供了资源操作的唯一入口，并提供了认证授权、访问控制、API注册和发现机制；·controllermanager负责维护集群的状态，比如故障检测、自动扩展、滚动更新等；·scheduler负责资源的调度，按照预定的调度策略将Pod调度到相应的机器上；·kubelet负责维护容器的生命周期，同时也负责Volume（CVI）和网络（CNI）
  • 工业监控CVI等同轴高清画面分割器有哪些功能 慧美高清会议录播厂家
    工业电视监控常用到小型的画面分割器，例如：2画面、三画面、4画面、画中画分割器等，对工业自控系统，仪器仪表等设备重点监控，需要使用以上小路数的分割器，传统的模拟视频分割器清晰度只能到D1显示分辨率，要想高清显示，支持1920*1080P，选用同轴高清方案，支持200万像素的监控摄像机输入，具有很好的兼容性，支持混合输入，也支持传统的模拟视频接入。下面介绍一款常用的工业高清二、四画面分割器，产品性能
  • Qt学习之QFile和QFileInfo 码农诗人 Qt学习qtQFileInfoQFile
    Qt项目中对文件操作是必不可少的。顾名思义：QFile是文件对象类，QFileInfo是文件信息对象类，结合例子我们看一下用法。读的文件内容如下，以字符“#”或者“;”开始的为注释行。[Extern_Item1];名称Name=libccgext_cvi_64.so;处理数据的最大线程数，缺省为空：30DealThreads=32;数据库最大线程数，缺省为空：10DBThreads=;心跳间隔，缺
  • Qt的Signals 和 Slots详解 Alliawell
    Signals和Slots用于对象间的通信（communicationbetweenobjects）。这种机制是Qt区别于其他框架的主要特点。这种机制是靠Qt的meta-objectsystem实现的。介绍很多框架使用callback技术（MFC，CVI等）。一个callback其实就是一个函数指针，但是Qt认为callback并不直观，而且在callback参数上容易出问题。信号与槽在Qt中使用
  • Oracle Linux 7.7 RPM 安装Oracle 19c allway2
    hostnamectlset-hostnameoracle19cvi/etc/hosts127.0.0.1localhostlocalhost.localdomainlocalhost4localhost4.localdomain4::1localhostlocalhost.localdomainlocalhost6localhost6.localdomain6192.168.111.155ora
  • SAP S/4HANA BP功能 我来自星星 S/4HANA
    从后勤物流角度来看，后勤主要主数据是客户主数据和供应商主数据。我们在S/4HANA中学到的第一件事是客户-供应商集成（CVI），也称为业务合作伙伴（BP)。在传统SAPERP中，客户和供应商是作为两个不同的功能存在的。而在SAPS/4HANA中，将两者统一维护为Businesspartner。所以传统的ERP系统中的事务代码都将被废弃，在SAPS/4HANA中统一通过事务代码BP使用角色的方式来实
  • linux各种命令归类简介 qq_41784469 linux
    linux各种命令归类1.文件cp拷贝命令cpa.cb.crm删除命令-r删除目录mv剪切命令mva.cb.cvi编辑命令cat打印命令tail查看文档尾部awk功能较为复杂后跟正则表达awk-F":"'{print$1}'file(输出文件第一列（域），分割符是：，不加-F":"就是默认空格分隔。printf每一行不加回车，print加回车。)tar-zcvf目标文件原来文件z压缩zipcvf打
  • S4 BP客户批导 你说是什么就是什么 SAPBAPI
    业务场景和目的批量创建S4BP客户考虑使用CVI_EI_INBOUND_MAIN。本文重点讨论的业务场景：使用用户上传的EXCLE文件批量创建客户，节省时间操作时间。开发申请要求：给出前台（TCODE：BP）创建客户相关数据，批量创建客户。前台操作，根据界面底部的消息提示一步一步输入BP客户的相关数据。相关BAPI2.1CVI_EI_INBOUND_MAIN(创建客户主要数据)2.1.1功能描述根
  • IP层抓包 perry_peng 测试开发CVILabViewTeststand
    LabWindows/CVI是NationalInstruments公司推出的一套面向测控领域的软件开发平台。它以ANSIC为核心，将功能强大，使用灵活的C语言平台与数据采集，分析和表达的测控专业工具有机地接和起来。它的集成化开发平台，交互式编程方法，丰富的控件和库函数大大增强了C语言的功能，为熟悉C语言的开发人员建立检测系统，自动测量环境，数据采集系统，过程监控系统等提供了一个理想的软件开发环境
  • Oracle APEX 安装Oracle REST Data Services (ORDS) 教程 sunansheng OracleAPEXOracleAPEX新手教程
    1-IntroductionTàiliệuđượcviếtdựatrên:Oracle11g,12cORDS3.x2-WhatisOracleRESTDataServices?OracleRESTDataServices(ORDS)isadataservicewhichisusedtoreplaceOracleHTTPserverandmod_plsql.ItbasesonJavaEEthatpr
  • Hi3516A_SDK_V1.0.5.0/package/mpp/tools 阿卡基YUAN Hi_SDK
    aenc_dumpao_dump.crc_attr.cvou_chn_dumpvo_video_csc_config.cvpss_chn_dumpaenc_dump.cisp_debugvi_bayerdumpvou_chn_dump.cvpss_attrvpss_chn_dump.cai_dumpisp_debug.cvi_bayerdump.cvou_screen_dumpvpss_attr2
  • 如何用ruby来写hadoop的mapreduce并生成jar包 wudixiaotie mapreduce
    ruby来写hadoop的mapreduce，我用的方法是rubydoop。怎么配置环境呢： 1.安装rvm：     不说了 网上有 2.安装ruby：     由于我以前是做ruby的，所以习惯性的先安装了ruby，起码调试起来比jruby快多了。 3.安装jruby：     rvm install jruby然后等待安
  • java编程思想 -- 访问控制权限 百合不是茶 java访问控制权限单例模式
    访问权限是java中一个比较中要的知识点,它规定者什么方法可以访问,什么不可以访问   一:包访问权限;   自定义包: package com.wj.control; //包 public class Demo { //定义一个无参的方法 public void DemoPackage(){ System.out.println("调用
  • [生物与医学]请审慎食用小龙虾 comsci 生物
         现在的餐馆里面出售的小龙虾,有一些是在野外捕捉的,这些小龙虾身体里面可能带有某些病毒和细菌,人食用以后可能会导致一些疾病,严重的甚至会死亡.....      所以,参加聚餐的时候,最好不要点小龙虾...就吃养殖的猪肉,牛肉,羊肉和鱼,等动物蛋白质     
  • org.apache.jasper.JasperException: Unable to compile class for JSP: 商人shang maven2.2jdk1.8
    环境： jdk1.8    maven  tomcat7-maven-plugin  2.0 原因： tomcat7-maven-plugin  2.0 不知吃 jdk 1.8，换成 tomcat7-maven-plugin  2.2就行，即     <plugin>
  • 你的垃圾你处理掉了吗?GC oloz GC
    前序:本人菜鸟，此文研究学习来自网络，各位牛牛多指教　 1.垃圾收集算法的核心思想 　　Java语言建立了垃圾收集机制，用以跟踪正在使用的对象和发现并回收不再使用(引用)的对象。该机制可以有效防范动态内存分配中可能发生的两个危险：因内存垃圾过多而引发的内存耗尽，以及不恰当的内存释放所造成的内存非法引用。 　　垃圾收集算法的核心思想是：对虚拟机可用内存空间，即堆空间中的对象进行识别
  • shiro 和 SESSSION 杨白白 shiro
    shiro 在web项目里默认使用的是web容器提供的session，也就是说shiro使用的session是web容器产生的，并不是自己产生的，在用于非web环境时可用其他来源代替。在web工程启动的时候它就和容器绑定在了一起，这是通过web.xml里面的shiroFilter实现的。通过session.getSession()方法会在浏览器cokkice产生JESSIONID，当关闭浏览器，此
  • 移动互联网终端 淘宝客如何实现盈利 小桔子 移動客戶端淘客淘寶App
           2012年淘宝联盟平台为站长和淘宝客带来的分成收入突破30亿元，同比增长100%。而来自移动端的分成达1亿元，其中美丽说、蘑菇街、果库、口袋购物等App运营商分成近5000万元。 可以看出，虽然目前阶段PC端对于淘客而言仍旧是盈利的大头，但移动端已经呈现出爆发之势。而且这个势头将随着智能终端(手机，平板)的加速普及而更加迅猛
  • wordpress小工具制作 aichenglong wordpress小工具
    wordpress 使用侧边栏的小工具，很方便调整页面结构 小工具的制作过程 1 在自己的主题文件中新建一个文件夹(如widget)，在文件夹中创建一个php(AWP_posts-category.php) 小工具是一个类,想侧边栏一样，还得使用代码注册，他才可以再后台使用，基本的代码一层不变 <?php class AWP_Post_Category extends WP_Wi
  • JS微信分享 AILIKES js
    // 所有功能必须包含在 WeixinApi.ready 中进行    WeixinApi.ready(function(Api) {        // 微信分享的数据            var wxData = {       &nb
  • 封装探讨 百合不是茶 JAVA面向对象 封装
    //封装   属性 方法 将某些东西包装在一起，通过创建对象或使用静态的方法来调用，称为封装；封装其实就是有选择性地公开或隐藏某些信息，它解决了数据的安全性问题，增加代码的可读性和可维护性   在 Aname类中申明三个属性，将其封装在一个类中：通过对象来调用   例如   1： //属性 将其设为私有 姓名 name 可以公开
  • jquery radio/checkbox change事件不能触发的问题 bijian1013 JavaScriptjquery
    我想让radio来控制当前我选择的是机动车还是特种车，如下所示：  <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"><
  • AngularJS中安全性措施 bijian1013 JavaScriptAngularJS安全性XSRFJSON漏洞
            在使用web应用中，安全性是应该首要考虑的一个问题。AngularJS提供了一些辅助机制，用来防护来自两个常见攻击方向的网络攻击。 一.JSON漏洞         当使用一个GET请求获取JSON数组信息的时候（尤其是当这一信息非常敏感，
  • [Maven学习笔记九]Maven发布web项目 bit1129 maven
    基于Maven的web项目的标准项目结构 user-project     user-core     user-service     user-web        src      
  • 【Hive七】Hive用户自定义聚合函数(UDAF) bit1129 hive
    用户自定义聚合函数，用户提供的多个入参通过聚合计算(求和、求最大值、求最小值)得到一个聚合计算结果的函数。 问题：UDF也可以提供输入多个参数然后输出一个结果的运算，比如加法运算add(3，5)，add这个UDF需要实现UDF的evaluate方法,那么UDF和UDAF的实质分别究竟是什么？   Double evaluate(Double a, Double b)  
  • 通过 nginx-lua 给 Nginx 增加 OAuth 支持 ronin47
    前言：我们使用Nginx的Lua中间件建立了OAuth2认证和授权层。如果你也有此打算，阅读下面的文档，实现自动化并获得收益。SeatGeek 在过去几年中取得了发展，我们已经积累了不少针对各种任务的不同管理接口。我们通常为新的展示需求创建新模块，比如我们自己的博客、图表等。我们还定期开发内部工具来处理诸如部署、可视化操作及事件处理等事务。在处理这些事务中，我们使用了几个不同的接口来认证： &n
  • 利用tomcat-redis-session-manager做session同步时自定义类对象属性保存不上的解决方法 bsr1983 session
    在利用tomcat-redis-session-manager做session同步时，遇到了在session保存一个自定义对象时，修改该对象中的某个属性，session未进行序列化，属性没有被存储到redis中。 在 tomcat-redis-session-manager的github上有如下说明： Session Change Tracking As noted in the &qu
  • 《代码大全》表驱动法-Table Driven Approach-1 bylijinnan java算法
    关于Table Driven Approach的一篇非常好的文章： http://www.codeproject.com/Articles/42732/Table-driven-Approach package com.ljn.base; import java.util.Random; public class TableDriven { public
  • Sybase封锁原理 chicony Sybase
           昨天在操作Sybase IQ12.7时意外操作造成了数据库表锁定，不能删除被锁定表数据也不能往其中写入数据。由于着急往该表抽入数据，因此立马着手解决该表的解锁问题。     无奈此前没有接触过Sybase IQ12.7这套数据库产品，加之当时已属于下班时间无法求助于支持人员支持，因此只有借助搜索引擎强大的
  • java异常处理机制 CrazyMizzz java
    java异常关键字有以下几个，分别为 try catch final throw throws 他们的定义分别为 try：    Opening exception-handling statement. catch：  Captures the exception. finally： Runs its code before terminating
  • hive 数据插入DML语法汇总 daizj hiveDML数据插入
    Hive的数据插入DML语法汇总1、Loading files into tables语法：1) LOAD DATA [LOCAL] INPATH 'filepath' [OVERWRITE] INTO TABLE tablename [PARTITION (partcol1=val1, partcol2=val2 ...)]解释：1)、上面命令执行环境为hive客户端环境下： hive>l
  • 工厂设计模式 dcj3sjt126com 设计模式
      使用设计模式是促进最佳实践和良好设计的好办法。设计模式可以提供针对常见的编程问题的灵活的解决方案。 工厂模式 工厂模式（Factory）允许你在代码执行时实例化对象。它之所以被称为工厂模式是因为它负责“生产”对象。工厂方法的参数是你要生成的对象对应的类名称。 Example #1 调用工厂方法（带参数） <?phpclass Example{ 
  • mysql字符串查找函数 dcj3sjt126com mysql
      FIND_IN_SET(str,strlist) 假如字符串str 在由N 子链组成的字符串列表strlist 中，则返回值的范围在1到 N 之间。一个字符串列表就是一个由一些被‘,’符号分开的自链组成的字符串。如果第一个参数是一个常数字符串，而第二个是type SET列，则   FIND_IN_SET() 函数被优化，使用比特计算。如果str不在strlist 或st
  • jvm内存管理 easterfly jvm
    一、JVM堆内存的划分 分为年轻代和年老代。年轻代又分为三部分：一个eden,两个survivor。 工作过程是这样的：e区空间满了后，执行minor gc，存活下来的对象放入s0, 对s0仍会进行minor gc，存活下来的的对象放入s1中，对s1同样执行minor gc，依旧存活的对象就放入年老代中； 年老代满了之后会执行major gc，这个是stop the word模式，执行
  • CentOS-6.3安装配置JDK-8 gengzg centos
    JAVA_HOME=/usr/java/jdk1.8.0_45 JRE_HOME=/usr/java/jdk1.8.0_45/jre PATH=$PATH:$JAVA_HOME/bin:$JRE_HOME/bin CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar:$JRE_HOME/lib export JAVA_HOME
  • 【转】关于web路径的获取方法 huangyc1210 Web路径
    假定你的web application 名称为news,你在浏览器中输入请求路径：  http://localhost:8080/news/main/list.jsp  则执行下面向行代码后打印出如下结果：  1、 System.out.println(request.getContextPath()); //可返回站点的根路径。也就是项
  • php里获取第一个中文首字母并排序 远去的渡口 数据结构PHP
    很久没来更新博客了，还是觉得工作需要多总结的好。今天来更新一个自己认为比较有成就的问题吧。 最近在做储值结算，需求里结算首页需要按门店的首字母A-Z排序。我的数据结构原本是这样的： Array ( [0] => Array ( [sid] => 2885842 [recetcstoredpay] =&g
  • java内部类 hm4123660 java内部类匿名内部类成员内部类方法内部类
         　在Java中，可以将一个类定义在另一个类里面或者一个方法里面，这样的类称为内部类。内部类仍然是一个独立的类，在编译之后内部类会被编译成独立的.class文件，但是前面冠以外部类的类名和$符号。内部类可以间接解决多继承问题,可以使用内部类继承一个类，外部类继承一个类，实现多继承。      &nb
  • Caused by: java.lang.IncompatibleClassChangeError: class org.hibernate.cfg.Exten zhb8015
    maven pom.xml关于hibernate的配置和异常信息如下，查了好多资料，问题还是没有解决。只知道是包冲突，就是不知道是哪个包....遇到这个问题的分享下是怎么解决的。。   maven pom:   <dependency> <groupId>org.hibernate</groupId> <ar
  • Spark 性能相关参数配置详解－任务调度篇 Stark_Summer sparkcachecpu任务调度yarn
    随着Spark的逐渐成熟完善, 越来越多的可配置参数被添加到Spark中来, 本文试图通过阐述这其中部分参数的工作原理和配置思路, 和大家一起探讨一下如何根据实际场合对Spark进行配置优化。   由于篇幅较长，所以在这里分篇组织，如果要看最新完整的网页版内容，可以戳这里：http://spark-config.readthedocs.org/，主要是便
  • css3滤镜 wangkeheng htmlcss
    经常看到一些网站的底部有一些灰色的图标，鼠标移入的时候会变亮，开始以为是js操作src或者bg呢，搜索了一下，发现了一个更好的方法：通过css3的滤镜方法。 html代码： <a href='' class='icon'><img src='utv.jpg' /></a> css代码： .icon{-webkit-filter: graysc
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他