日常工作问题解决：centos/linux系统如何检测端口是否打开

1、telnet命令

格式： telnet ip 端口号

[root@centos7-127 ~]# telnet 192.168.87.128 22
Trying 192.168.87.128...
Connected to 192.168.87.128.  # 表示端口已经开放
Escape character is '^]'.
SSH-2.0-OpenSSH_7.4

[root@centos7-127 ~]# telnet 192.168.87.128 8008
Trying 192.168.87.128...
telnet: connect to address 192.168.87.128: Connection refused # 表示端口未开放

2、nmap命令

格式： nmap ip -p 端口号

Starting Nmap 6.40 ( http://nmap.org ) at 2019-09-19 10:34 CST
Nmap scan report for centos7-128.cn (192.168.87.128)
Host is up (0.00028s latency). # 主机可通
PORT   STATE SERVICE 
80/tcp open  http # 端口开放
MAC Address: 00:0C:29:0C:AE:01 (VMware)

Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds
[root@centos7-127 ~]# nmap 192.168.87.128 -p 8080

Starting Nmap 6.40 ( http://nmap.org ) at 2019-09-19 10:34 CST
Nmap scan report for centos7-128.cn (192.168.87.128)
Host is up (0.00035s latency). # 主机可通
PORT     STATE  SERVICE
8080/tcp closed http-proxy # 端口关闭
MAC Address: 00:0C:29:0C:AE:01 (VMware)

Nmap done: 1 IP address (1 host up) scanned in 0.03 seconds

3、通过nc命令检查

命令格式：nc -v ip 端口

[root@centos7-127 ~]# nc -v 192.168.87.128 80
Ncat: Version 7.50 ( https://nmap.org/ncat )
Ncat: Connected to 192.168.87.128:80. # 端口开放
^C
[root@centos7-127 ~]# nc -v 192.168.87.128 8080
Ncat: Version 7.50 ( https://nmap.org/ncat ) # 端口关闭
Ncat: Connection refused. 

4、使用nc测试端口是否可用

需要测试端口的服务器启动nc服务监听端口

格式: nc -lp 端口

[root@centos7-128 ~]# nc -lp 8081
adfadfjla 

测试的服务器使用nc命令连接，然后发送信息

格式： nc ip 端口

[root@centos7-128 ~]# nc 192.168.87.128 8081
adfadfjla

能收到信息，表示端口可用

转载于:https://www.cnblogs.com/yj411511/p/11547460.html