本文重点分析Broker接收到生产者发送消息请求后,如何存储在Broker上,本文暂不关注事务消息机制。
RocketMQ的存储核心类为DefaultMessageStore,存储消息的入口方法为:putMessage
在深入学习消息存储之前,我们先大概了解一下DefaultMessageStore的属性与构造方法。
1.1 DefaultMessageStore 概要
重要属性:
1)messageStoreConfig 存储相关的配置,例如存储路径、commitLog文件大小,刷盘频次等等
2)CommitLog commitLog,comitLog的核心处理类,消息存储在commitlog文件中。
3)ConcurrentMap
4)FlushConsumeQueueService flushConsumeQueueService ConsumeQueue刷盘服务线程
5)CleanCommitLogService cleanCommitLogService commitLog 定时清除服务现场
6)CleanConsumeQueueService cleanConsumeQueueService consumeQueue 定时清除服务现场
7)IndexService indexService 索引服务
8)AllocateMappedFileService allocateMappedFileService MappedFile分配线程,RocketMQ使用内存映射处理commitlog,consumeQueue文件
9)ReputMessageService reputMessageService 重试存储消息服务现场
10)HAService haService 主从同步实现服务
11)ScheduleMessageService scheduleMessageService 定时任务调度器,执行定时任务,主要是处理定时任务。
12)StoreStatsService storeStatsService 存储统计服务
13)TransientStorePool transientStorePool DataBuffer池,后文会详细使用
14)RunningFlags runningFlags 存储服务状态
15)BrokerStatsManager brokerStatsManager Broker统计服务
16)MessageArrivingListener messageArrivingListener 消息达到监听器
17)StoreCheckpoint storeCheckpoint 检查点
18)LinkedList
commitlog index。
上面这些属性,是整个消息存储的核心,也是我们需要重点关注与理解的。
接下来,先从putMessage为入口,一起探究整个消息存储全过程
1.2 消息存储流程
1.2.1 DefaultMessageStore.putMessage
public PutMessageResult putMessage(MessageExtBrokerInner msg) {
if (this.shutdown) {
log.warn("message store has shutdown, so putMessage is forbidden");
return new PutMessageResult(PutMessageStatus.SERVICE_NOT_AVAILABLE, null);
}
if (BrokerRole.SLAVE == this.messageStoreConfig.getBrokerRole()) {
long value = this.printTimes.getAndIncrement();
if ((value % 50000) == 0) {
log.warn("message store is slave mode, so putMessage is forbidden ");
}
return new PutMessageResult(PutMessageStatus.SERVICE_NOT_AVAILABLE, null);
}
if (!this.runningFlags.isWriteable()) {
long value = this.printTimes.getAndIncrement();
if ((value % 50000) == 0) {
log.warn("message store is not writeable, so putMessage is forbidden " + this.runningFlags.getFlagBits());
}
return new PutMessageResult(PutMessageStatus.SERVICE_NOT_AVAILABLE, null);
} else {
this.printTimes.set(0);
}
if (msg.getTopic().length() > Byte.MAX_VALUE) {
log.warn("putMessage message topic length too long " + msg.getTopic().length());
return new PutMessageResult(PutMessageStatus.MESSAGE_ILLEGAL, null);
}
if (msg.getPropertiesString() != null && msg.getPropertiesString().length() > Short.MAX_VALUE) {
log.warn("putMessage message properties length too long " + msg.getPropertiesString().length());
return new PutMessageResult(PutMessageStatus.PROPERTIES_SIZE_EXCEEDED, null);
}
if (this.isOSPageCacheBusy()) { //@1
return new PutMessageResult(PutMessageStatus.OS_PAGECACHE_BUSY, null);
}
long beginTime = this.getSystemClock().now();
PutMessageResult result = this.commitLog.putMessage(msg); // @2
long eclipseTime = this.getSystemClock().now() - beginTime;
if (eclipseTime > 500) {
log.warn("putMessage not in lock eclipse time(ms)={}, bodyLength={}", eclipseTime, msg.getBody().length);
}
this.storeStatsService.setPutMessageEntireTimeMax(eclipseTime); //@3
if (null == result || !result.isOk()) { //@4
this.storeStatsService.getPutMessageFailedTimes().incrementAndGet();
}
return result;
}
代码@1,检测操作系统页写入是否忙
@Override
public boolean isOSPageCacheBusy() {
long begin = this.getCommitLog().getBeginTimeInLock();
long diff = this.systemClock.now() - begin;
if (diff < 10000000 //
&& diff > this.messageStoreConfig.getOsPageCacheBusyTimeOutMills()) {
return true;
}
return false;
}
代码@2,将日志写入CommitLog文件,具体实现类CommitLog
代码@3,记录相关统计信息
代码@4,记录写commitlog失败次数
1.2.2 CommitLog.putMessage
public PutMessageResult putMessage(final MessageExtBrokerInner msg) {
// Set the storage time
msg.setStoreTimestamp(System.currentTimeMillis());
// Set the message body BODY CRC (consider the most appropriate setting
// on the client)
msg.setBodyCRC(UtilAll.crc32(msg.getBody()));
// Back to Results
AppendMessageResult result = null;
StoreStatsService storeStatsService = this.defaultMessageStore.getStoreStatsService();
String topic = msg.getTopic();
int queueId = msg.getQueueId();
final int tranType = MessageSysFlag.getTransactionValue(msg.getSysFlag()); // @1
if (tranType == MessageSysFlag.TRANSACTION_NOT_TYPE//
|| tranType == MessageSysFlag.TRANSACTION_COMMIT_TYPE) { // @2
// Delay Delivery
if (msg.getDelayTimeLevel() > 0) {
if (msg.getDelayTimeLevel() > this.defaultMessageStore.getScheduleMessageService().getMaxDelayLevel()) {
msg.setDelayTimeLevel(this.defaultMessageStore.getScheduleMessageService().getMaxDelayLevel());
}
topic = ScheduleMessageService.SCHEDULE_TOPIC;
queueId = ScheduleMessageService.delayLevel2QueueId(msg.getDelayTimeLevel());
// Backup real topic, queueId
MessageAccessor.putProperty(msg, MessageConst.PROPERTY_REAL_TOPIC, msg.getTopic());
MessageAccessor.putProperty(msg, MessageConst.PROPERTY_REAL_QUEUE_ID, String.valueOf(msg.getQueueId()));
msg.setPropertiesString(MessageDecoder.messageProperties2String(msg.getProperties()));
msg.setTopic(topic);
msg.setQueueId(queueId);
}
}
long eclipseTimeInLock = 0;
MappedFile unlockMappedFile = null;
MappedFile mappedFile = this.mappedFileQueue.getLastMappedFile(); // @3
putMessageLock.lock(); //spin or ReentrantLock ,depending on store config //@4
try {
long beginLockTimestamp = this.defaultMessageStore.getSystemClock().now();
this.beginTimeInLock = beginLockTimestamp;
// Here settings are stored timestamp, in order to ensure an orderly
// global
msg.setStoreTimestamp(beginLockTimestamp);
if (null == mappedFile || mappedFile.isFull()) {
mappedFile = this.mappedFileQueue.getLastMappedFile(0); // Mark: NewFile may be cause noise
}
if (null == mappedFile) {
log.error("create maped file1 error, topic: " + msg.getTopic() + " clientAddr: " + msg.getBornHostString());
beginTimeInLock = 0;
return new PutMessageResult(PutMessageStatus.CREATE_MAPEDFILE_FAILED, null);
} // @5
result = mappedFile.appendMessage(msg, this.appendMessageCallback); // @6
switch (result.getStatus()) {
case PUT_OK:
break;
case END_OF_FILE:
unlockMappedFile = mappedFile;
// Create a new file, re-write the message
mappedFile = this.mappedFileQueue.getLastMappedFile(0);
if (null == mappedFile) {
// XXX: warn and notify me
log.error("create maped file2 error, topic: " + msg.getTopic() + " clientAddr: " + msg.getBornHostString());
beginTimeInLock = 0;
return new PutMessageResult(PutMessageStatus.CREATE_MAPEDFILE_FAILED, result);
}
result = mappedFile.appendMessage(msg, this.appendMessageCallback);
break;
case MESSAGE_SIZE_EXCEEDED:
case PROPERTIES_SIZE_EXCEEDED:
beginTimeInLock = 0;
return new PutMessageResult(PutMessageStatus.MESSAGE_ILLEGAL, result);
case UNKNOWN_ERROR:
beginTimeInLock = 0;
return new PutMessageResult(PutMessageStatus.UNKNOWN_ERROR, result);
default:
beginTimeInLock = 0;
return new PutMessageResult(PutMessageStatus.UNKNOWN_ERROR, result);
}
eclipseTimeInLock = this.defaultMessageStore.getSystemClock().now() - beginLockTimestamp;
beginTimeInLock = 0;
} finally {
putMessageLock.unlock();
}
if (eclipseTimeInLock > 500) {
log.warn("[NOTIFYME]putMessage in lock cost time(ms)={}, bodyLength={} AppendMessageResult={}", eclipseTimeInLock, msg.getBody().length, result);
}
if (null != unlockMappedFile && this.defaultMessageStore.getMessageStoreConfig().isWarmMapedFileEnable()) {
this.defaultMessageStore.unlockMappedFile(unlockMappedFile);
}
PutMessageResult putMessageResult = new PutMessageResult(PutMessageStatus.PUT_OK, result);
// Statistics
storeStatsService.getSinglePutMessageTopicTimesTotal(msg.getTopic()).incrementAndGet();
storeStatsService.getSinglePutMessageTopicSizeTotal(topic).addAndGet(result.getWroteBytes());
handleDiskFlush(result, putMessageResult, msg); // @7
handleHA(result, putMessageResult, msg); //@8
return putMessageResult;
}
先对ComitLog写入消息做一个简单描述,然后需要详细探究每个步骤的实现
代码@1 获取消息类型(事务消息,非事务消息,Commit消息
代码@3 获取一个MappedFile对象,内存映射的具体实现
代码@4,加锁
代码@5,验证代码@3的MappedFile对象,获取一个可用的MappedFile(如果没有,则创建一个)
代码@6 通过MappedFile对象写入文件
代码@7 根据刷盘策略刷盘
代码@8 主从同步
1.3 存储核心类分析
1.3.1 源码分析MappedFile
1.3.1.1 MappedFile 基础属性
public static final int OS_PAGE_SIZE = 1024 * 4; // 4K
private static final AtomicLong TOTAL_MAPPED_VIRTUAL_MEMORY = new AtomicLong(0);
private static final AtomicInteger TOTAL_MAPPED_FILES = new AtomicInteger(0);
protected final AtomicInteger wrotePosition = new AtomicInteger(0);
protected final AtomicInteger committedPosition = new AtomicInteger(0);
private final AtomicInteger flushedPosition = new AtomicInteger(0);
protected int fileSize;
protected FileChannel fileChannel;
/**
* Message will put to here first, and then reput to FileChannel if writeBuffer is not null.
*/
protected ByteBuffer writeBuffer = null;
protected TransientStorePool transientStorePool = null;
private String fileName;
private long fileFromOffset;
private File file;
private MappedByteBuffer mappedByteBuffer;
private volatile long storeTimestamp = 0;
private boolean firstCreateInQueue = false;
1)OS_PAGE_SIZE OSpage大小,4K
2)TOTAL_MAPPED_VIRTUAL_MEMORY ,类变量,所有MappedFile实例已使用字节总数
3)TOTAL_MAPPED_FILES MappedFile个数。
4)wrotePosition 当前MappedFile对象当前写指针
5)committedPosition 当前提交的指针,个人觉得是预先申请这个位置,数据可能还没有真正写入到Buffer中,该值可以大于wrotePosition (待验证)
6)flushedPosition 当前刷写到磁盘的指针
7)fileSize 文件总大小
8)fileChannel 文件通道
9)writeBuffer 写buffer,message先写入该buffer,然后写入到FileChannel,为何?待解?
10)TransientStorePool transientStorePool,,ByteBuffer的缓冲池,一个CommitLog file对应一个
DirectByteBuffer。
11)fileName 文件名称
12)fileFromOffset 文件序号,代表该文件代表的文件偏移量
13)File file 文件对象
14)MappedByteBuffer mappedByteBuffer,,内存文件映射
15)storeTimestamp 最后一次存储时间戳
16)firstCreateInQueue
1.3.1.2 初始化
private void init(final String fileName, final int fileSize) throws IOException {
this.fileName = fileName;
this.fileSize = fileSize;
this.file = new File(fileName);
this.fileFromOffset = Long.parseLong(this.file.getName());
boolean ok = false;
ensureDirOK(this.file.getParent());
try {
this.fileChannel = new RandomAccessFile(this.file, "rw").getChannel();
this.mappedByteBuffer = this.fileChannel.map(MapMode.READ_WRITE, 0, fileSize);
TOTAL_MAPPED_VIRTUAL_MEMORY.addAndGet(fileSize);
TOTAL_MAPPED_FILES.incrementAndGet();
ok = true;
} catch (FileNotFoundException e) {
log.error("create file channel " + this.fileName + " Failed. ", e);
throw e;
} catch (IOException e) {
log.error("map file " + this.fileName + " Failed. ", e);
throw e;
} finally {
if (!ok && this.fileChannel != null) {
this.fileChannel.close();
}
}
}
初始化FileChannel、mappedByteBuffer等。
1.3.1.3 appendMessagesInner 消息写入
public AppendMessageResult appendMessagesInner(final MessageExt messageExt, final AppendMessageCallback cb) {
assert messageExt != null;
assert cb != null;
int currentPos = this.wrotePosition.get(); // @1
if (currentPos < this.fileSize) {
ByteBuffer byteBuffer = writeBuffer != null ? writeBuffer.slice() : this.mappedByteBuffer.slice();
byteBuffer.position(currentPos);
AppendMessageResult result = null;
if (messageExt instanceof MessageExtBrokerInner) { // @2
result = cb.doAppend(this.getFileFromOffset(), byteBuffer, this.fileSize - currentPos, (MessageExtBrokerInner) messageExt);
} else if (messageExt instanceof MessageExtBatch) {
result = cb.doAppend(this.getFileFromOffset(), byteBuffer, this.fileSize - currentPos, (MessageExtBatch)messageExt);
} else {
return new AppendMessageResult(AppendMessageStatus.UNKNOWN_ERROR);
}
this.wrotePosition.addAndGet(result.getWroteBytes()); // @4
this.storeTimestamp = result.getStoreTimestamp();
return result;
}
log.error("MappedFile.appendMessage return null, wrotePosition: {} fileSize: {}", currentPos, this.fileSize);
return new AppendMessageResult(AppendMessageStatus.UNKNOWN_ERROR);
}
代码@1,获取当前写入位置
代码@2,根据消息类型,是批量消息还是单个消息,进入相应的处理
代码@3,消息写入实现
接下看具体的消息写入逻辑,代码来源于:org.apache.rocketmq.store.CommitLog$DefaultAppendMessageCallback
public AppendMessageResult doAppend(final long fileFromOffset, final ByteBuffer byteBuffer, final int maxBlank,
final MessageExtBrokerInner msgInner) { //@1
// STORETIMESTAMP + STOREHOSTADDRESS + OFFSET
// PHY OFFSET
long wroteOffset = fileFromOffset + byteBuffer.position();
this.resetByteBuffer(hostHolder, 8);
String msgId = MessageDecoder.createMessageId(this.msgIdMemory, msgInner.getStoreHostBytes(hostHolder), wroteOffset); //@2
// Record ConsumeQueue information //@3start
keyBuilder.setLength(0);
keyBuilder.append(msgInner.getTopic());
keyBuilder.append('-');
keyBuilder.append(msgInner.getQueueId());
String key = keyBuilder.toString();
Long queueOffset = CommitLog.this.topicQueueTable.get(key);
if (null == queueOffset) {
queueOffset = 0L;
CommitLog.this.topicQueueTable.put(key, queueOffset);
} //@3 end
// Transaction messages that require special handling //@4 start
final int tranType = MessageSysFlag.getTransactionValue(msgInner.getSysFlag());
switch (tranType) {
// Prepared and Rollback message is not consumed, will not enter the
// consumer queuec
case MessageSysFlag.TRANSACTION_PREPARED_TYPE:
case MessageSysFlag.TRANSACTION_ROLLBACK_TYPE:
queueOffset = 0L;
break;
case MessageSysFlag.TRANSACTION_NOT_TYPE:
case MessageSysFlag.TRANSACTION_COMMIT_TYPE:
default:
break;
} // @4 end
/**
* Serialize message
*/
final byte[] propertiesData =
msgInner.getPropertiesString() == null ? null : msgInner.getPropertiesString().getBytes(MessageDecoder.CHARSET_UTF8);
final int propertiesLength = propertiesData == null ? 0 : propertiesData.length;
if (propertiesLength > Short.MAX_VALUE) {
log.warn("putMessage message properties length too long. length={}", propertiesData.length);
return new AppendMessageResult(AppendMessageStatus.PROPERTIES_SIZE_EXCEEDED);
} //@5
final byte[] topicData = msgInner.getTopic().getBytes(MessageDecoder.CHARSET_UTF8);
final int topicLength = topicData.length;
final int bodyLength = msgInner.getBody() == null ? 0 : msgInner.getBody().length;
final int msgLen = calMsgLength(bodyLength, topicLength, propertiesLength); //@6
// Exceeds the maximum message
if (msgLen > this.maxMessageSize) { // @7
CommitLog.log.warn("message size exceeded, msg total size: " + msgLen + ", msg body size: " + bodyLength
+ ", maxMessageSize: " + this.maxMessageSize);
return new AppendMessageResult(AppendMessageStatus.MESSAGE_SIZE_EXCEEDED);
}
// Determines whether there is sufficient free space
if ((msgLen + END_FILE_MIN_BLANK_LENGTH) > maxBlank) { // @8
this.resetByteBuffer(this.msgStoreItemMemory, maxBlank);
// 1 TOTALSIZE
this.msgStoreItemMemory.putInt(maxBlank);
// 2 MAGICCODE
this.msgStoreItemMemory.putInt(CommitLog.BLANK_MAGIC_CODE);
// 3 The remaining space may be any value
//
// Here the length of the specially set maxBlank
final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
byteBuffer.put(this.msgStoreItemMemory.array(), 0, maxBlank);
return new AppendMessageResult(AppendMessageStatus.END_OF_FILE, wroteOffset, maxBlank, msgId, msgInner.getStoreTimestamp(),
queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);
}
// Initialization of storage space @9
this.resetByteBuffer(msgStoreItemMemory, msgLen);
// 1 TOTALSIZE
this.msgStoreItemMemory.putInt(msgLen);
// 2 MAGICCODE
this.msgStoreItemMemory.putInt(CommitLog.MESSAGE_MAGIC_CODE);
// 3 BODYCRC
this.msgStoreItemMemory.putInt(msgInner.getBodyCRC());
// 4 QUEUEID
this.msgStoreItemMemory.putInt(msgInner.getQueueId());
// 5 FLAG
this.msgStoreItemMemory.putInt(msgInner.getFlag());
// 6 QUEUEOFFSET
this.msgStoreItemMemory.putLong(queueOffset);
// 7 PHYSICALOFFSET
this.msgStoreItemMemory.putLong(fileFromOffset + byteBuffer.position());
// 8 SYSFLAG
this.msgStoreItemMemory.putInt(msgInner.getSysFlag());
// 9 BORNTIMESTAMP
this.msgStoreItemMemory.putLong(msgInner.getBornTimestamp());
// 10 BORNHOST
this.resetByteBuffer(hostHolder, 8);
this.msgStoreItemMemory.put(msgInner.getBornHostBytes(hostHolder));
// 11 STORETIMESTAMP
this.msgStoreItemMemory.putLong(msgInner.getStoreTimestamp());
// 12 STOREHOSTADDRESS
this.resetByteBuffer(hostHolder, 8);
this.msgStoreItemMemory.put(msgInner.getStoreHostBytes(hostHolder));
//this.msgBatchMemory.put(msgInner.getStoreHostBytes());
// 13 RECONSUMETIMES
this.msgStoreItemMemory.putInt(msgInner.getReconsumeTimes());
// 14 Prepared Transaction Offset
this.msgStoreItemMemory.putLong(msgInner.getPreparedTransactionOffset());
// 15 BODY
this.msgStoreItemMemory.putInt(bodyLength);
if (bodyLength > 0)
this.msgStoreItemMemory.put(msgInner.getBody());
// 16 TOPIC
this.msgStoreItemMemory.put((byte) topicLength);
this.msgStoreItemMemory.put(topicData);
// 17 PROPERTIES
this.msgStoreItemMemory.putShort((short) propertiesLength);
if (propertiesLength > 0)
this.msgStoreItemMemory.put(propertiesData);
final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
// Write messages to the queue buffer
byteBuffer.put(this.msgStoreItemMemory.array(), 0, msgLen);
AppendMessageResult result = new AppendMessageResult(AppendMessageStatus.PUT_OK, wroteOffset, msgLen, msgId,
msgInner.getStoreTimestamp(), queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills); //@10
switch (tranType) {
case MessageSysFlag.TRANSACTION_PREPARED_TYPE:
case MessageSysFlag.TRANSACTION_ROLLBACK_TYPE:
break;
case MessageSysFlag.TRANSACTION_NOT_TYPE:
case MessageSysFlag.TRANSACTION_COMMIT_TYPE:
// The next update ConsumeQueue information
CommitLog.this.topicQueueTable.put(key, ++queueOffset);
break;
default:
break;
}
return result;
}
代码@1 参数详解
fileFromOffset :该文件在整个文件序列中的偏移量
ByteBuffer byteBuffer buffer
int maxBlank 最大可写字节数
MessageExtBrokerInner msgInner
代码@2,创建msgId,底层存储由16个字节表示,如下图:
代码@3,根据topic-queryId 获取该队列的偏移地址(待写入的地址),如果没有,新增一个键值对,当前偏移量为0 代码@4,对事物消息需要单独特殊的处理(PREPARE,ROLLBACK类型的消息,不进入Consume队列)
代码@5 消息的附加属性长度不能超过65536个字节。
代码@6 计算消息存储长度,消息存储格式:
代码@7 如果消息长度超过配置的消息总长度,则返回MESSAGE_SIZE_EXCEEDED。
代码@8 如果该MapperFile中可剩余空间小于当前消息存储空间,返回END_OF_FILE
代码@9 将消息写入MapperFile中(内存中)
代码@10 重点讲解一下AppendMessageResult方法:
public AppendMessageResult(AppendMessageStatus status, long wroteOffset, int wroteBytes, String msgId,
long storeTimestamp, long logicsOffset, long pagecacheRT) {
this.status = status;
this.wroteOffset = wroteOffset;
this.wroteBytes = wroteBytes;
this.msgId = msgId;
this.storeTimestamp = storeTimestamp;
this.logicsOffset = logicsOffset;
this.pagecacheRT = pagecacheRT;
}
AppendMessageStatus status AppendMessageStatus,追加结果(成功,到达文件尾(文件剩余空间不足)、消息长度超过、消息属性长度超出、未知错误)
wroteOffset 消息的偏移量(相对于整个commitlog)
wroteBytes 消息待写入字节
msgId 消息ID
storeTimestamp 消息写入时机戳
logicsOffset 消息队列偏移量
pagecacheRT 消息写入时机戳(消息存储时间戳--- 消息存储开始时间戳)
然后返回AppendMessageStatus,流程回到 【1.2.2 CommitLog.putMessage】的代码@6,,然后如果返回结果是OK的话进入到代码@7,@8、
handleDiskFlush(result, putMessageResult, msg); // @7
handleHA(result, putMessageResult, msg); //@8
我们先关注正常流程,然后再次梳理流程,特别关注异常流程,锁竞争等情况。
1.3.1.4 消息刷写
public void handleDiskFlush(AppendMessageResult result, PutMessageResult putMessageResult, MessageExt messageExt) {
// Synchronization flush
if (FlushDiskType.SYNC_FLUSH == this.defaultMessageStore.getMessageStoreConfig().getFlushDiskType()) { // @1
final GroupCommitService service = (GroupCommitService) this.flushCommitLogService;
if (messageExt.isWaitStoreMsgOK()) { // @2
GroupCommitRequest request = new GroupCommitRequest(result.getWroteOffset() + result.getWroteBytes());
service.putRequest(request);
boolean flushOK = request.waitForFlush(this.defaultMessageStore.getMessageStoreConfig().getSyncFlushTimeout());
if (!flushOK) {
log.error("do groupcommit, wait for flush failed, topic: " + messageExt.getTopic() + " tags: " + messageExt.getTags()
+ " client address: " + messageExt.getBornHostString());
putMessageResult.setPutMessageStatus(PutMessageStatus.FLUSH_DISK_TIMEOUT);
}
} else { //@3
service.wakeup();
}
}
// Asynchronous flush //@4
else {
if (!this.defaultMessageStore.getMessageStoreConfig().isTransientStorePoolEnable()) {
flushCommitLogService.wakeup();
} else {
commitLogService.wakeup();
}
}
}
刷写磁盘支持同步、异步刷写,下文将分别重点阐述该这两种机制
代码@1 同步刷写,这里有两种配置,是否一定要收到存储MSG信息,才返回,默认为true。
先来分析一下 GroupCommitRequest
nextOffSet : 下一个点的偏移量
countDownLatch : 闭锁
flushOk 是否刷写成功。
1)GroupCommitService 同步刷写服务类,一个线程一直的处理同步刷写任务,每处理一个循环后等待10毫秒,一旦新任务到达,立即唤醒执行任务。
看一下相关的核心方法:
GroupCommitService.run方法
GroupCommitService的父类ServiceThread的waitForRunning方法
从上面的代码看,我们可以把doCommit方法当成业务方法,在run方法的循环被调用,每执行完一次doCommit,等待10毫秒,这也是waitForRunning的核心逻辑,doCommit中的任务是通过调用如下方法:
private void doCommit() {
synchronized (this.requestsRead) {
if (!this.requestsRead.isEmpty()) {
for (GroupCommitRequest req : this.requestsRead) {
// There may be a message in the next file, so a maximum of
// two times the flush
boolean flushOK = false;
for (int i = 0; i < 2 && !flushOK; i++) {
flushOK = CommitLog.this.mappedFileQueue.getFlushedWhere() >= req.getNextOffset();
if (!flushOK) {
CommitLog.this.mappedFileQueue.flush(0); // @1
}
}
req.wakeupCustomer(flushOK); //@2
}
long storeTimestamp = CommitLog.this.mappedFileQueue.getStoreTimestamp();
if (storeTimestamp > 0) {
CommitLog.this.defaultMessageStore.getStoreCheckpoint().setPhysicMsgTimestamp(storeTimestamp);
}
this.requestsRead.clear();
} else {
// Because of individual messages is set to not sync flush, it
// will come to this process
CommitLog.this.mappedFileQueue.flush(0);
}
}
}
代码@1,执行刷盘操作
代码@2,唤醒用户线程
刷盘具体实现:MappedFileQueue
public boolean flush(final int flushLeastPages) {
boolean result = true;
MappedFile mappedFile = this.findMappedFileByOffset(this.flushedWhere, false); // @1
if (mappedFile != null) {
long tmpTimeStamp = mappedFile.getStoreTimestamp();
int offset = mappedFile.flush(flushLeastPages); //@2
long where = mappedFile.getFileFromOffset() + offset;
result = where == this.flushedWhere;
this.flushedWhere = where; //@3
if (0 == flushLeastPages) {
this.storeTimestamp = tmpTimeStamp;
}
}
return result;
}
代码@1 根据上次刷新的位置,得到当前的MappedFile对象
代码@2,执行MappedFile的flush方法
代码@3,更新上次刷新的位置
MappedFile.flush方法详解:
/**
* @param flushLeastPages
* @return The current flushed position
*/
public int flush(final int flushLeastPages) {
if (this.isAbleToFlush(flushLeastPages)) { // @1
if (this.hold()) {
int value = getReadPosition();
try {
//We only append data to fileChannel or mappedByteBuffer, never both.
if (writeBuffer != null || this.fileChannel.position() != 0) {
this.fileChannel.force(false);
} else {
this.mappedByteBuffer.force();
}
} catch (Throwable e) {
log.error("Error occurred when force data to disk.", e);
}
this.flushedPosition.set(value);
this.release();
} else {
log.warn("in flush, hold failed, flush offset = " + this.flushedPosition.get());
this.flushedPosition.set(getReadPosition());
}
}
return this.getFlushedPosition();
}
刷写的实现逻辑就是调用FileChannel或MappedByteBuffer的force方法。
在继续探讨异步刷盘前,在简单回顾一下消息存储的过程:
2)异步刷盘
异步刷盘机制,实现原理很简单,就是按照配置的周期定时提交信息到MappedFile,定时刷写到磁盘,我们重点关注如下几个配置项,定义与MessageStoreConfig
相关服务类(线程)CommitLog$FlushRealTimeService CommitLog$CommitRealTimeService
commitIntervalCommitLog : CommitRealTimeService线程的循环间隔,默认200ms
commitCommitLogLeastPages :每次提交到文件中,至少需要多少个页(默认4页)
flushCommitLogLeastPages : 每次刷写到磁盘(commitlog),至少需要多个页(默认4页)
flushIntervalCommitLog : 异步刷新线程,每次处理完一批任务后的等待时间,默认为500ms
刷盘的逻辑在同步时已经讲解,现在我们重点看一下提交操作,参考MappedFileQueue.commit方法:
MappedFileQueue.
public boolean commit(final int commitLeastPages) {
boolean result = true;
MappedFile mappedFile = this.findMappedFileByOffset(this.committedWhere, false);
if (mappedFile != null) {
int offset = mappedFile.commit(commitLeastPages);
long where = mappedFile.getFileFromOffset() + offset;
result = where == this.committedWhere;
this.committedWhere = where;
}
return result;
}
MappedFile.commit:
public int commit(final int commitLeastPages) {
if (writeBuffer == null) {
//no need to commit data to file channel, so just regard wrotePosition as committedPosition.
return this.wrotePosition.get();
}
if (this.isAbleToCommit(commitLeastPages)) { //@1
if (this.hold()) {
commit0(commitLeastPages); //@2
this.release();
} else {
log.warn("in commit, hold failed, commit offset = " + this.committedPosition.get());
}
}
// All dirty data has been committed to FileChannel.
if (writeBuffer != null && this.transientStorePool != null && this.fileSize == this.committedPosition.get()) {
this.transientStorePool.returnBuffer(writeBuffer);
this.writeBuffer = null;
}
return this.committedPosition.get();
}
代码@1,看是否可以提交(符合最小需要提交的页)
protected boolean isAbleToCommit(final int commitLeastPages) {
int flush = this.committedPosition.get(); // @1
int write = this.wrotePosition.get(); // @2
if (this.isFull()) { //@3
return true;
}
if (commitLeastPages > 0) { //@4
return ((write / OS_PAGE_SIZE) - (flush / OS_PAGE_SIZE)) >= commitLeastPages;
}
return write > flush;
}
代码@1:上次刷新偏移量
代码@2:当前写入偏移量
代码@3:如果文件已满,返回true
代码@4:如果commitLeastPages大于0,则需要判断当前写入的偏移与上次刷新偏移量之间的间隔,如果超过commitLeastPages页数,则提交,否则本次不提交。
代码@5,如果没有新的数据写入,本次提交任务结束。
commit0 方法详解:
protected void commit0(final int commitLeastPages) {
int writePos = this.wrotePosition.get();
int lastCommittedPosition = this.committedPosition.get();
if (writePos - this.committedPosition.get() > 0) {
try {
ByteBuffer byteBuffer = writeBuffer.slice();
byteBuffer.position(lastCommittedPosition);
byteBuffer.limit(writePos);
this.fileChannel.position(lastCommittedPosition);
this.fileChannel.write(byteBuffer);
this.committedPosition.set(writePos);
} catch (Throwable e) {
log.error("Error occurred when commit data to FileChannel.", e);
}
}
}
该方法的实现原理很简单,就不一一解释了。
1.3.1.5 主从同步机制
handleHA(result, putMessageResult, msg);
HA机制本文暂时跳过,后面专题分析。在这里我们只要知道消息同步发送机制时,会首先将消息发送给从,至于数据主从一致性等,下篇重点思考与分析。
再次回顾ComitLog消息存储:
其实ComitLog存储,主要是先写入到MappedFile(MappedByteBuffer或FileChannel中:内存中),此过程多个线程串行处理,然后根据不同的磁盘刷写方法进行刷盘操作、主从同步操作,最终返回结果。
1.4 异常流程
1.4.1 写入MappedByteBuffer阶段相关错误
1)END_OF_FILE
首先我们知道,一个MappedFile对象映射一个commitLog文件,一个commitlog文件被映射为一个MappedFile(MappedByteBuffer),由于消息不是定长的,故一个文件最后的剩余空间或许放不下一个消息,为了区分,在每一个commitlog文件的最后会写入8个字节,表示文件的结束。如果一个文件最后的剩余空间无法存放一个消息时,会抛出END_OF_FILE错误,此时会重新获取下一个MappedFile,再重新存入,故END_OF_FILE在业务层面不会抛出。
2)MESSAGE_SIZE_EXCEEDED
3)PROPERTIES_SIZE_EXCEEDED
4)UNKNOWN_ERROR
其他错误直接返回,封装成PutMessageStatus,有错误,直接将错误码返回给消息发送方
思考题:
异步刷盘、Master-Slave机制消息可靠性分析?
总结
本文着重理解了消息存储到CommitLog文件的过程,大体分为三个步骤:1)消息追加,也就是将消息追加到CommitLog文件对应的内存映射区(本过程是加锁的,非并发;2)刷盘阶段(并发)就是将内存区数据刷写到磁盘文件(支持同步、异步刷盘);3)主从同步处理(并发)
推荐:https://www.roncoo.com/course/list.html?courseName=MQ
文章来源:https://blog.csdn.net/prestigeding/article/details/76652063