Fabric1.4单机单节点部署及测试

1.基础环境搭建

  • Docker Client 客户端
  • Docker Daemon 守护进程
  • Docker Image 镜像
  • Docker Container 容器

这块的安装相信大家通过资料都可以完成,重点是下面

2.Fabric环境搭建

2.1 创建singlepeer目录

# cd $GOPATH/github.com/hyperledger/fabric
# mkdir singlepeer
# cd singlepeer

2.2 下载源码文件

下载链接:https://nexus.hyperledger.org/content/repositories/releases/org/hyperledger/fabric/hyperledger-fabric/linux-amd64-1.4.1/

把下载的hyperledger-fabric-linux-amd64-1.4.1.tar.gz二进制文件包解压,把其中的bin目录拷贝到singlepeer目录下 ,记得

chmod -R 755 ./bin

2.3 准备生成证书和区块配置文件

配置crypto-config.yaml和configtx.yaml文件,拷贝到singlepeer目录下

  • crypto-config.yaml
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

# ---------------------------------------------------------------------------
# "OrdererOrgs" - Definition of organizations managing orderer nodes
# ---------------------------------------------------------------------------
OrdererOrgs:
  # ---------------------------------------------------------------------------
  # Orderer
  # ---------------------------------------------------------------------------
  - Name: Orderer
    Domain: example.com
    # ---------------------------------------------------------------------------
    # "Specs" - See PeerOrgs below for complete description
    # ---------------------------------------------------------------------------
    Specs:
      - Hostname: orderer
# ---------------------------------------------------------------------------
# "PeerOrgs" - Definition of organizations managing peer nodes
# ---------------------------------------------------------------------------
PeerOrgs:
  # ---------------------------------------------------------------------------
  # Org1
  # ---------------------------------------------------------------------------
  - Name: Org1
    Domain: org1.example.com
    EnableNodeOUs: true
    # ---------------------------------------------------------------------------
    # "Specs"
    # ---------------------------------------------------------------------------
    # Uncomment this section to enable the explicit definition of hosts in your
    # configuration.  Most users will want to use Template, below
    #
    # Specs is an array of Spec entries.  Each Spec entry consists of two fields:
    #   - Hostname:   (Required) The desired hostname, sans the domain.
    #   - CommonName: (Optional) Specifies the template or explicit override for
    #                 the CN.  By default, this is the template:
    #
    #                              "{{.Hostname}}.{{.Domain}}"
    #
    #                 which obtains its values from the Spec.Hostname and
    #                 Org.Domain, respectively.
    # ---------------------------------------------------------------------------
    # Specs:
    #   - Hostname: foo # implicitly "foo.org1.example.com"
    #     CommonName: foo27.org5.example.com # overrides Hostname-based FQDN set above
    #   - Hostname: bar
    #   - Hostname: baz
    # ---------------------------------------------------------------------------
    # "Template"
    # ---------------------------------------------------------------------------
    # Allows for the definition of 1 or more hosts that are created sequentially
    # from a template. By default, this looks like "peer%d" from 0 to Count-1.
    # You may override the number of nodes (Count), the starting index (Start)
    # or the template used to construct the name (Hostname).
    #
    # Note: Template and Specs are not mutually exclusive.  You may define both
    # sections and the aggregate nodes will be created for you.  Take care with
    # name collisions
    # ---------------------------------------------------------------------------
    Template:
      Count: 1
      # Start: 5
      # Hostname: {{.Prefix}}{{.Index}} # default
    # ---------------------------------------------------------------------------
    # "Users"
    # ---------------------------------------------------------------------------
    # Count: The number of user accounts _in addition_ to Admin
    # ---------------------------------------------------------------------------
    Users:
      Count: 1
  • configtx.yaml
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

---
################################################################################
#
#   Section: Organizations
#
#   - This section defines the different organizational identities which will
#   be referenced later in the configuration.
#
################################################################################
Organizations:

    # SampleOrg defines an MSP using the sampleconfig.  It should never be used
    # in production but may be used as a template for other definitions
    - &OrdererOrg
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: OrdererOrg

        # ID to load the MSP definition as
        ID: OrdererMSP

        # MSPDir is the filesystem path which contains the MSP configuration
        MSPDir: crypto-config/ordererOrganizations/example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel///
        Policies:
            Readers:
                Type: Signature
                Rule: "OR('OrdererMSP.member')"
            Writers:
                Type: Signature
                Rule: "OR('OrdererMSP.member')"
            Admins:
                Type: Signature
                Rule: "OR('OrdererMSP.admin')"

    - &Org1
        # DefaultOrg defines the organization which is used in the sampleconfig
        # of the fabric.git development environment
        Name: Org1MSP

        # ID to load the MSP definition as
        ID: Org1MSP

        MSPDir: crypto-config/peerOrganizations/org1.example.com/msp

        # Policies defines the set of policies at this level of the config tree
        # For organization policies, their canonical path is usually
        #   /Channel///
        Policies:
            Readers:
                Type: Signature
                Rule: "OR('Org1MSP.admin', 'Org1MSP.peer', 'Org1MSP.client')"
            Writers:
                Type: Signature
                Rule: "OR('Org1MSP.admin', 'Org1MSP.client')"
            Admins:
                Type: Signature
                Rule: "OR('Org1MSP.admin')"

        AnchorPeers:
            # AnchorPeers defines the location of peers which can be used
            # for cross org gossip communication.  Note, this value is only
            # encoded in the genesis block in the Application section context
            - Host: peer0.org1.example.com
              Port: 7051

################################################################################
#
#   SECTION: Capabilities
#
#   - This section defines the capabilities of fabric network. This is a new
#   concept as of v1.1.0 and should not be utilized in mixed networks with
#   v1.0.x peers and orderers.  Capabilities define features which must be
#   present in a fabric binary for that binary to safely participate in the
#   fabric network.  For instance, if a new MSP type is added, newer binaries
#   might recognize and validate the signatures from this type, while older
#   binaries without this support would be unable to validate those
#   transactions.  This could lead to different versions of the fabric binaries
#   having different world states.  Instead, defining a capability for a channel
#   informs those binaries without this capability that they must cease
#   processing transactions until they have been upgraded.  For v1.0.x if any
#   capabilities are defined (including a map with all capabilities turned off)
#   then the v1.0.x peer will deliberately crash.
#
################################################################################
Capabilities:
    # Channel capabilities apply to both the orderers and the peers and must be
    # supported by both.  Set the value of the capability to true to require it.
    Global: &ChannelCapabilities
        # V1.1 for Global is a catchall flag for behavior which has been
        # determined to be desired for all orderers and peers running v1.0.x,
        # but the modification of which would cause incompatibilities.  Users
        # should leave this flag set to true.
        V1_1: true

    # Orderer capabilities apply only to the orderers, and may be safely
    # manipulated without concern for upgrading peers.  Set the value of the
    # capability to true to require it.
    Orderer: &OrdererCapabilities
        # V1.1 for Order is a catchall flag for behavior which has been
        # determined to be desired for all orderers running v1.0.x, but the
        # modification of which  would cause incompatibilities.  Users should
        # leave this flag set to true.
        V1_1: true

    # Application capabilities apply only to the peer network, and may be safely
    # manipulated without concern for upgrading orderers.  Set the value of the
    # capability to true to require it.
    Application: &ApplicationCapabilities
        # V1.1 for Application is a catchall flag for behavior which has been
        # determined to be desired for all peers running v1.0.x, but the
        # modification of which would cause incompatibilities.  Users should
        # leave this flag set to true.
        V1_2: true

################################################################################
#
#   SECTION: Application
#
#   - This section defines the values to encode into a config transaction or
#   genesis block for application related parameters
#
################################################################################
Application: &ApplicationDefaults

    # Organizations is the list of orgs which are defined as participants on
    # the application side of the network
    Organizations:

    # Policies defines the set of policies at this level of the config tree
    # For Application policies, their canonical path is
    #   /Channel/Application/
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"

    # Capabilities describes the application level capabilities, see the
    # dedicated Capabilities section elsewhere in this file for a full
    # description
    Capabilities:
        <<: *ApplicationCapabilities

################################################################################
#
#   SECTION: Orderer
#
#   - This section defines the values to encode into a config transaction or
#   genesis block for orderer related parameters
#
################################################################################
Orderer: &OrdererDefaults

    # Orderer Type: The orderer implementation to start
    # Available types are "solo" and "kafka"
    OrdererType: solo

    Addresses:
        - orderer.example.com:7050

    # Batch Timeout: The amount of time to wait before creating a batch
    BatchTimeout: 2s

    # Batch Size: Controls the number of messages batched into a block
    BatchSize:

        # Max Message Count: The maximum number of messages to permit in a batch
        MaxMessageCount: 10

        # Absolute Max Bytes: The absolute maximum number of bytes allowed for
        # the serialized messages in a batch.
        AbsoluteMaxBytes: 98 MB

        # Preferred Max Bytes: The preferred maximum number of bytes allowed for
        # the serialized messages in a batch. A message larger than the preferred
        # max bytes will result in a batch larger than preferred max bytes.
        PreferredMaxBytes: 512 KB

    Kafka:
        # Brokers: A list of Kafka brokers to which the orderer connects. Edit
        # this list to identify the brokers of the ordering service.
        # NOTE: Use IP:port notation.
        Brokers:
            - 127.0.0.1:9092

    # Organizations is the list of orgs which are defined as participants on
    # the orderer side of the network
    Organizations:

    # Policies defines the set of policies at this level of the config tree
    # For Orderer policies, their canonical path is
    #   /Channel/Orderer/
    Policies:
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"
        # BlockValidation specifies what signatures must be included in the block
        # from the orderer for the peer to validate it.
        BlockValidation:
            Type: ImplicitMeta
            Rule: "ANY Writers"

    # Capabilities describes the orderer level capabilities, see the
    # dedicated Capabilities section elsewhere in this file for a full
    # description
    Capabilities:
        <<: *OrdererCapabilities

################################################################################
#
#   CHANNEL
#
#   This section defines the values to encode into a config transaction or
#   genesis block for channel related parameters.
#
################################################################################
Channel: &ChannelDefaults
    # Policies defines the set of policies at this level of the config tree
    # For Channel policies, their canonical path is
    #   /Channel/
    Policies:
        # Who may invoke the 'Deliver' API
        Readers:
            Type: ImplicitMeta
            Rule: "ANY Readers"
        # Who may invoke the 'Broadcast' API
        Writers:
            Type: ImplicitMeta
            Rule: "ANY Writers"
        # By default, who may modify elements at this config level
        Admins:
            Type: ImplicitMeta
            Rule: "MAJORITY Admins"


    # Capabilities describes the channel level capabilities, see the
    # dedicated Capabilities section elsewhere in this file for a full
    # description
    Capabilities:
        <<: *ChannelCapabilities

################################################################################
#
#   Profile
#
#   - Different configuration profiles may be encoded here to be specified
#   as parameters to the configtxgen tool
#
################################################################################
Profiles:

    OneOrgsOrdererGenesis:
        <<: *ChannelDefaults
        Orderer:
            <<: *OrdererDefaults
            Organizations:
                - *OrdererOrg
        Consortiums:
            SampleConsortium:
                Organizations:
                    - *Org1
    OneOrgsChannel:
        Consortium: SampleConsortium
        Application:
            <<: *ApplicationDefaults
            Organizations:
                - *Org1

2.4 生成公私钥和证书

# ./bin/cryptogen generate --config=./crypto-config.yaml

2.5 生成创世区块

创世区块是为了Orderer排序启动时用到,Peer节点在启动后需要创建Channel的配置文件在这里也一并生成,

# ./bin/configtxgen -profile OneOrgsChannel -outputCreateChannelTx ./channel-artifacts/mychannel.tx -channelID mychannel

2.6 部署Orderer节点

2.6.1配置Orderer节点启动文件docker-orderer.yaml

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  orderer.example.com:
    container_name: orderer.example.com
    image: hyperledger/fabric-orderer
    environment:
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      # - ORDERER_GENERAL_LOGLEVEL=error
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_LISTENPORT=7050
      #- ORDERER_GENERAL_GENESISPROFILE=AntiMothOrdererGenesis
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/channel-artifacts/genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/msp
      #- ORDERER_GENERAL_LEDGERTYPE=ram
      #- ORDERER_GENERAL_LEDGERTYPE=file
      # enabled TLS
      - ORDERER_GENERAL_TLS_ENABLED=false
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt]
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/singlepeer/
    command: orderer
    volumes:
    - ./channel-artifacts/genesis.block:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/channel-artifacts/genesis.block
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/msp
    - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls
    networks:
      default:
        aliases:
          - aberic
    ports:
      - 7050:7050

ORDERER_GENERAL_GENESISFILE:指向生成的创世纪区块,我的目录是/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/channel-artifacts/genesis.block

ORDERER_GENERAL_LOCALMSPID:和configtx.yaml中Organizations:节点下的ID的值一致。

ORDERER_GENERAL_LOCALMSPDIR:指向msp,我的目录是/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/msp

ORDERER_GENERAL_TLS_PRIVATEKEY:指向生成证书文件,我的目录是/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.key

ORDERER_GENERAL_TLS_CERTIFICATE:指向生成证书文件,我的目录是/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt

ORDERER_GENERAL_TLS_ROOTCAS:指向生成证书文件,我的目录是/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt

同理其它配置信息:working_dir,volumes:找到自己的目录指向

 

2.7部署peer0.org1节点

2.7.1配置Peer节点启动文件docker-peer.yaml

# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#

version: '2'

services:

  couchdb:
    container_name: couchdb
    image: hyperledger/fabric-couchdb
    # Comment/Uncomment the port mapping if you want to hide/expose the CouchDB service,
    # for example map it to utilize Fauxton User Interface in dev environments.
    ports:
      - "5984:5984"

  ca:
    container_name: ca
    image: hyperledger/fabric-ca
    environment:
      - FABRIC_CA_HOME=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/ca
      - FABRIC_CA_SERVER_CA_NAME=ca
      - FABRIC_CA_SERVER_TLS_ENABLED=false
      - FABRIC_CA_SERVER_TLS_CERTFILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/ca/ca.org1.example.com-cert.pem
      - FABRIC_CA_SERVER_TLS_KEYFILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/ca/f5617615ea50e08358addecfa264af0a1e01b8825da987a97b58707e7d7571a8_sk
    ports:
      - "7054:7054"
    command: sh -c 'fabric-ca-server start --ca.certfile /opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/ca/ca.org1.example.com-cert.pem --ca.keyfile /opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/ca/f5617615ea50e08358addecfa264af0a1e01b8825da987a97b58707e7d7571a8_sk -b admin:adminpw -d'
    volumes:
      - ./crypto-config/peerOrganizations/org1.example.com/ca/:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/ca

  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_LEDGER_STATE_STATEDATABASE=CouchDB
      - CORE_LEDGER_STATE_COUCHDBCONFIG_COUCHDBADDRESS=couchdb:5984

      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_NETWORKID=aberic
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_CHAINCODELISTENADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP

      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=aberic_default
      - CORE_PEER_GOSSIP_SKIPHANDSHAKE=true
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=false
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/singlepeer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053
    depends_on:
      - couchdb
    networks:
      default:
        aliases:
          - aberic

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # - CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/peerOrganizations/org1.example.com/users/[email protected]/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/singlepeer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/channel-artifacts
    depends_on:
      - peer0.org1.example.com

以上的配置和自己目录的指向保持一致,请大家自行配置。

Peer启动文件启动的是peer0.org1.example.com节点,所以对应的证书在peer0.org1.example.com下可以找到。

dockerr-peer. yaml中有两处的加密:f5617615ea50e08358addecfa264af0a1e01b8825da987a97b58707e7d7571a8_sk请替换成自己的加密串

我这里是为了执行源码的example02例子,所以在cli下volumes:里配置要执行的智能合约程序

2.8 准备docker配置文件

2.8.1配置客户端启动文件docker-compose-cli.yaml

version: '2'

services:
  orderer.example.com:
    container_name: orderer.example.com
    image: hyperledger/fabric-orderer
    environment:
      - ORDERER_GENERAL_LOGLEVEL=debug
      - ORDERER_GENERAL_LISTENADDRESS=0.0.0.0
      - ORDERER_GENERAL_GENESISMETHOD=file
      - ORDERER_GENERAL_GENESISFILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/channel-artifacts/genesis.block
      - ORDERER_GENERAL_LOCALMSPID=OrdererMSP
      - ORDERER_GENERAL_LOCALMSPDIR=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/msp
      # enabled TLS
      - ORDERER_GENERAL_TLS_ENABLED=false
      - ORDERER_GENERAL_TLS_PRIVATEKEY=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.key
      - ORDERER_GENERAL_TLS_CERTIFICATE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
      - ORDERER_GENERAL_TLS_ROOTCAS=[/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt]
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/singlepeer
    command: orderer
    volumes:
      - ./channel-artifacts/genesis.block:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/channel-artifacts/genesis.block
      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/msp
      - ./crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls
    ports:
      - 7050:7050

  peer0.org1.example.com:
    container_name: peer0.org1.example.com
    image: hyperledger/fabric-peer
    environment:
      - CORE_PEER_ID=peer0.org1.example.com
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_CHAINCODEADDRESS=peer0.org1.example.com:7052
      - CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
      - CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
  
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      # the following setting starts chaincode containers on the same
      # bridge network as the peers
      # https://docs.docker.com/compose/networking/
      - CORE_VM_DOCKER_HOSTCONFIG_NETWORKMODE=singlepeer_default
      #- CORE_LOGGING_LEVEL=ERROR
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_GOSSIP_USELEADERELECTION=true
      - CORE_PEER_GOSSIP_ORGLEADER=false
      - CORE_PEER_PROFILE_ENABLED=true
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/ca.crt
    volumes:
        - /var/run/:/host/var/run/
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/msp
        - ./crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    command: peer node start
    ports:
      - 7051:7051
      - 7052:7052
      - 7053:7053

  cli:
    container_name: cli
    image: hyperledger/fabric-tools
    tty: true
    environment:
      - GOPATH=/opt/gopath
      - CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
      - CORE_LOGGING_LEVEL=DEBUG
      - CORE_PEER_ID=cli
      - CORE_PEER_ADDRESS=peer0.org1.example.com:7051
      - CORE_PEER_LOCALMSPID=Org1MSP
      - CORE_PEER_TLS_ENABLED=false
      - CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
      - CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
      - CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
      - CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/[email protected]/msp
    working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
    volumes:
        - /var/run/:/host/var/run/
        - ./chaincode/go/:/opt/gopath/src/github.com/hyperledger/fabric/singlepeer/chaincode/go
        - ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
        - ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
    depends_on:
      - orderer.example.com
      - peer0.org1.example.com

2.9 启动Fabric网络

2.9.1 启动orderer和peer

#docker -compose -f docker-orderer.yaml up -d
#docker -compose -f docker-peer.yaml up -d

2.9.2 启动cli容器

# docker exec -it cli bash

2.9.3 创建Channel

# peer channel create -o orderer.example.com:7050 -c mychannel -f ./channel-artifacts/mychannel.tx

2.9.4 Peer加入Channel

# peer channel join -b mychannel.block

2.10 安装与运行智能合约

2.10.1 安装智能合约

# peer chaincode install -n mycc -p github.com/hyperledger/fabric/singlepeer/chaincode/go/example02/cmd/ -v 1.0

2.10.2 实例化智能合约

# peer chaincode instantiate -o orderer.example.com:7050 -C mychannel -n mycc -v 1.0 -c '{"Args":["init","a","100","b","200"]}' -P "AND ('Org1MSP.peer')"

2.10.3 Peer上查询a,显示100

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","a"]}'

2.10.4 Peer上进行a向b转10交易

# peer chaincode invoke -C mychannel -n mycc -c '{"Args":["invoke","a","b","10"]}'

2.10.5 Peer上查询a,显示210

# peer chaincode query -C mychannel -n mycc -c '{"Args":["query","b"]}'

转载于:https://my.oschina.net/u/193508/blog/3063076

你可能感兴趣的:(Fabric1.4单机单节点部署及测试)