HeroKern

仿手机功能写WIFI程序

有这几个功能:
a. 自动扫描WIFI热点
b. 点击某个WIFI热点后会去连接它, 必要时让你输入密码

c. 曾经连接过的WIFI热点会保留它的密码等信息, 以后会自动连接

测试环境是在Linux环境下实验的，代码有点多，下面看不清楚的点击这里下载源码！

wpa_cli.c文件：

/*
* WPA Supplicant - command line interface for wpa_supplicant daemon
* Copyright (c) 2004-2012, Jouni Malinen
*
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*/

#include "includes.h"

#ifdef CONFIG_CTRL_IFACE

#ifdef CONFIG_CTRL_IFACE_UNIX
#include
#endif /* CONFIG_CTRL_IFACE_UNIX */

#include "common/wpa_ctrl.h"
#include "utils/common.h"
#include "utils/eloop.h"
#include "utils/edit.h"
#include "utils/list.h"
#include "common/version.h"
#include "common/ieee802_11_defs.h"
#ifdef ANDROID
#include
#endif /* ANDROID */
#include
#include

static const char *wpa_cli_version =
"wpa_cli v" VERSION_STR "\n"
"Copyright (c) 2004-2012, Jouni Malinen and contributors";

static const char *wpa_cli_license =
"This software may be distributed under the terms of the BSD license.\n"
"See README for more details.\n";

static const char *wpa_cli_full_license =
"This software may be distributed under the terms of the BSD license.\n"
"\n"
"Redistribution and use in source and binary forms, with or without\n"
"modification, are permitted provided that the following conditions are\n"
"met:\n"
"\n"
"1. Redistributions of source code must retain the above copyright\n"
" notice, this list of conditions and the following disclaimer.\n"
"\n"
"2. Redistributions in binary form must reproduce the above copyright\n"
" notice, this list of conditions and the following disclaimer in the\n"
" documentation and/or other materials provided with the distribution.\n"
"\n"
"3. Neither the name(s) of the above-listed copyright holder(s) nor the\n"
" names of its contributors may be used to endorse or promote products\n"
" derived from this software without specific prior written permission.\n"
"\n"
"THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS\n"
"\"AS IS\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT\n"
"LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR\n"
"A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT\n"
"OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,\n"
"SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT\n"
"LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,\n"
"DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY\n"
"THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n"
"(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE\n"
"OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n"
"\n";

static struct wpa_ctrl *ctrl_conn;
static struct wpa_ctrl *mon_conn;
static int wpa_cli_quit = 0;
static int wpa_cli_attached = 0;
static int wpa_cli_connected = 0;
static int wpa_cli_last_id = 0;
#ifndef CONFIG_CTRL_IFACE_DIR
#define CONFIG_CTRL_IFACE_DIR "/var/run/wpa_supplicant"
#endif /* CONFIG_CTRL_IFACE_DIR */
static const char *ctrl_iface_dir = CONFIG_CTRL_IFACE_DIR;
static char *ctrl_ifname = NULL;
static const char *pid_file = NULL;
static const char *action_file = NULL;
static int ping_interval = 5;
static int interactive = 0;

struct cli_txt_entry {
struct dl_list list;
char *txt;
};

static DEFINE_DL_LIST(bsses); /* struct cli_txt_entry */
static DEFINE_DL_LIST(p2p_peers); /* struct cli_txt_entry */
static DEFINE_DL_LIST(p2p_groups); /* struct cli_txt_entry */

static void print_help(const char *cmd);
static void wpa_cli_mon_receive(int sock, void *eloop_ctx, void *sock_ctx);
static void wpa_cli_close_connection(void);
static char * wpa_cli_get_default_ifname(void);
static char ** wpa_list_cmd_list(void);

static void usage(void)
{
printf("wpa_cli [-p] [-i] [-hvB] "
"[-a] \\\n"
" [-P] [-g] [-G] "
"[command..]\n"
" -h = help (show this usage text)\n"
" -v = shown version information\n"
" -a = run in daemon mode executing the action file based on "
"events from\n"
" wpa_supplicant\n"
" -B = run a daemon in the background\n"
" default path: " CONFIG_CTRL_IFACE_DIR "\n"
" default interface: first interface found in socket path\n");
print_help(NULL);
}

static void cli_txt_list_free(struct cli_txt_entry *e)
{
dl_list_del(&e->list);
os_free(e->txt);
os_free(e);
}

static void cli_txt_list_flush(struct dl_list *list)
{
struct cli_txt_entry *e;
while ((e = dl_list_first(list, struct cli_txt_entry, list)))
cli_txt_list_free(e);
}

static struct cli_txt_entry * cli_txt_list_get(struct dl_list *txt_list,
const char *txt)
{
struct cli_txt_entry *e;
dl_list_for_each(e, txt_list, struct cli_txt_entry, list) {
if (os_strcmp(e->txt, txt) == 0)
return e;
}
return NULL;
}

static void cli_txt_list_del(struct dl_list *txt_list, const char *txt)
{
struct cli_txt_entry *e;
e = cli_txt_list_get(txt_list, txt);
if (e)
cli_txt_list_free(e);
}

static void cli_txt_list_del_addr(struct dl_list *txt_list, const char *txt)
{
u8 addr[ETH_ALEN];
char buf[18];
if (hwaddr_aton(txt, addr) < 0)
return;
os_snprintf(buf, sizeof(buf), MACSTR, MAC2STR(addr));
cli_txt_list_del(txt_list, buf);
}

#ifdef CONFIG_P2P
static void cli_txt_list_del_word(struct dl_list *txt_list, const char *txt)
{
const char *end;
char *buf;
end = os_strchr(txt, ' ');
if (end == NULL)
end = txt + os_strlen(txt);
buf = os_malloc(end - txt + 1);
if (buf == NULL)
return;
os_memcpy(buf, txt, end - txt);
buf[end - txt] = '\0';
cli_txt_list_del(txt_list, buf);
os_free(buf);
}
#endif /* CONFIG_P2P */

static int cli_txt_list_add(struct dl_list *txt_list, const char *txt)
{
struct cli_txt_entry *e;
e = cli_txt_list_get(txt_list, txt);
if (e)
return 0;
e = os_zalloc(sizeof(*e));
if (e == NULL)
return -1;
e->txt = os_strdup(txt);
if (e->txt == NULL) {
os_free(e);
return -1;
}
dl_list_add(txt_list, &e->list);
return 0;
}

#ifdef CONFIG_P2P
static int cli_txt_list_add_addr(struct dl_list *txt_list, const char *txt)
{
u8 addr[ETH_ALEN];
char buf[18];
if (hwaddr_aton(txt, addr) < 0)
return -1;
os_snprintf(buf, sizeof(buf), MACSTR, MAC2STR(addr));
return cli_txt_list_add(txt_list, buf);
}

static int cli_txt_list_add_word(struct dl_list *txt_list, const char *txt)
{
const char *end;
char *buf;
int ret;
end = os_strchr(txt, ' ');
if (end == NULL)
end = txt + os_strlen(txt);
buf = os_malloc(end - txt + 1);
if (buf == NULL)
return -1;
os_memcpy(buf, txt, end - txt);
buf[end - txt] = '\0';
ret = cli_txt_list_add(txt_list, buf);
os_free(buf);
return ret;
}
#endif /* CONFIG_P2P */

static char ** cli_txt_list_array(struct dl_list *txt_list)
{
unsigned int i, count = dl_list_len(txt_list);
char **res;
struct cli_txt_entry *e;

res = os_calloc(count + 1, sizeof(char *));
if (res == NULL)
return NULL;

i = 0;
dl_list_for_each(e, txt_list, struct cli_txt_entry, list) {
res[i] = os_strdup(e->txt);
if (res[i] == NULL)
break;
i++;
}

return res;
}

static int get_cmd_arg_num(const char *str, int pos)
{
int arg = 0, i;

for (i = 0; i <= pos; i++) {
if (str[i] != ' ') {
arg++;
while (i <= pos && str[i] != ' ')
i++;
}
}

if (arg > 0)
arg--;
return arg;
}

static int str_starts(const char *src, const char *match)
{
return os_strncmp(src, match, os_strlen(match)) == 0;
}

static int wpa_cli_show_event(const char *event)
{
const char *start;

start = os_strchr(event, '>');
if (start == NULL)
return 1;

start++;
/*
* Skip BSS added/removed events since they can be relatively frequent
* and are likely of not much use for an interactive user.
*/
if (str_starts(start, WPA_EVENT_BSS_ADDED) ||
str_starts(start, WPA_EVENT_BSS_REMOVED))
return 0;

return 1;
}

static int wpa_cli_open_connection(const char *ifname, int attach)
{
#if defined(CONFIG_CTRL_IFACE_UDP) || defined(CONFIG_CTRL_IFACE_NAMED_PIPE)
ctrl_conn = wpa_ctrl_open(ifname);
if (ctrl_conn == NULL)
return -1;

if (attach && interactive)
mon_conn = wpa_ctrl_open(ifname);
else
mon_conn = NULL;
#else /* CONFIG_CTRL_IFACE_UDP || CONFIG_CTRL_IFACE_NAMED_PIPE */
char *cfile = NULL;
int flen, res;

if (ifname == NULL)
return -1;

#ifdef ANDROID
if (access(ctrl_iface_dir, F_OK) < 0) {
cfile = os_strdup(ifname);
if (cfile == NULL)
return -1;
}
#endif /* ANDROID */

if (cfile == NULL) {
flen = os_strlen(ctrl_iface_dir) + os_strlen(ifname) + 2;
cfile = os_malloc(flen);
if (cfile == NULL)
return -1;
res = os_snprintf(cfile, flen, "%s/%s", ctrl_iface_dir,
ifname);
if (res < 0 || res >= flen) {
os_free(cfile);
return -1;
}
}

ctrl_conn = wpa_ctrl_open(cfile);
if (ctrl_conn == NULL) {
os_free(cfile);
return -1;
}

if (attach && interactive)
mon_conn = wpa_ctrl_open(cfile);
else
mon_conn = NULL;
os_free(cfile);
#endif /* CONFIG_CTRL_IFACE_UDP || CONFIG_CTRL_IFACE_NAMED_PIPE */

if (mon_conn) {
if (wpa_ctrl_attach(mon_conn) == 0) {
wpa_cli_attached = 1;
if (interactive)
eloop_register_read_sock(
wpa_ctrl_get_fd(mon_conn),
wpa_cli_mon_receive, NULL, NULL);
} else {
printf("Warning: Failed to attach to "
"wpa_supplicant.\n");
wpa_cli_close_connection();
return -1;
}
}

return 0;
}

static void wpa_cli_close_connection(void)
{
if (ctrl_conn == NULL)
return;

if (wpa_cli_attached) {
wpa_ctrl_detach(interactive ? mon_conn : ctrl_conn);
wpa_cli_attached = 0;
}
wpa_ctrl_close(ctrl_conn);
ctrl_conn = NULL;
if (mon_conn) {
eloop_unregister_read_sock(wpa_ctrl_get_fd(mon_conn));
wpa_ctrl_close(mon_conn);
mon_conn = NULL;
}
}

static void wpa_cli_msg_cb(char *msg, size_t len)
{
printf("%s\n", msg);
}

static char ret_buf[2048];
static size_t ret_len;

static int _wpa_ctrl_command(struct wpa_ctrl *ctrl, char *cmd, int print)
{
int ret;

if (ctrl_conn == NULL) {
printf("Not connected to wpa_supplicant - command dropped.\n");
return -1;
}
ret_len = sizeof(ret_buf) - 1;
ret = wpa_ctrl_request(ctrl, cmd, os_strlen(cmd), ret_buf, &ret_len,
wpa_cli_msg_cb);
if (ret == -2) {
printf("'%s' command timed out.\n", cmd);
return -2;
} else if (ret < 0) {
printf("'%s' command failed.\n", cmd);
return -1;
}
ret_buf[ret_len] = '\0';
if (print) {
ret_buf[ret_len] = '\0';
printf("%s", ret_buf);
if (interactive && ret_len > 0 && ret_buf[ret_len - 1] != '\n')
printf("\n");
}
return 0;
}

static int wpa_ctrl_command(struct wpa_ctrl *ctrl, char *cmd)
{
return _wpa_ctrl_command(ctrl, cmd, 0);
}

static int write_cmd(char *buf, size_t buflen, const char *cmd, int argc,
char *argv[])
{
int i, res;
char *pos, *end;

pos = buf;
end = buf + buflen;

res = os_snprintf(pos, end - pos, "%s", cmd);
if (res < 0 || res >= end - pos)
goto fail;
pos += res;

for (i = 0; i < argc; i++) {
res = os_snprintf(pos, end - pos, " %s", argv[i]);
if (res < 0 || res >= end - pos)
goto fail;
pos += res;
}

buf[buflen - 1] = '\0';
return 0;

fail:
printf("Too long command\n");
return -1;
}

static int wpa_cli_cmd(struct wpa_ctrl *ctrl, const char *cmd, int min_args,
int argc, char *argv[])
{
char buf[256];
if (argc < min_args) {
printf("Invalid %s command - at least %d argument%s "
"required.\n", cmd, min_args,
min_args > 1 ? "s are" : " is");
return -1;
}
if (write_cmd(buf, sizeof(buf), cmd, argc, argv) < 0)
return -1;
return wpa_ctrl_command(ctrl, buf);
}

static int wpa_cli_cmd_ifname(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "IFNAME");
}

static int wpa_cli_cmd_status(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
if (argc > 0 && os_strcmp(argv[0], "verbose") == 0)
return wpa_ctrl_command(ctrl, "STATUS-VERBOSE");
if (argc > 0 && os_strcmp(argv[0], "wps") == 0)
return wpa_ctrl_command(ctrl, "STATUS-WPS");
return wpa_ctrl_command(ctrl, "STATUS");
}

static int wpa_cli_cmd_ping(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "PING");
}

static int wpa_cli_cmd_relog(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "RELOG");
}

static int wpa_cli_cmd_note(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "NOTE", 1, argc, argv);
}

static int wpa_cli_cmd_mib(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "MIB");
}

static int wpa_cli_cmd_pmksa(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "PMKSA");
}

static int wpa_cli_cmd_help(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
print_help(argc > 0 ? argv[0] : NULL);
return 0;
}

static char ** wpa_cli_complete_help(const char *str, int pos)
{
int arg = get_cmd_arg_num(str, pos);
char **res = NULL;

switch (arg) {
case 1:
res = wpa_list_cmd_list();
break;
}

return res;
}

static int wpa_cli_cmd_license(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
printf("%s\n\n%s\n", wpa_cli_version, wpa_cli_full_license);
return 0;
}

static int wpa_cli_cmd_quit(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
wpa_cli_quit = 1;
if (interactive)
eloop_terminate();
return 0;
}

static void wpa_cli_show_variables(void)
{
printf("set variables:\n"
" EAPOL::heldPeriod (EAPOL state machine held period, "
"in seconds)\n"
" EAPOL::authPeriod (EAPOL state machine authentication "
"period, in seconds)\n"
" EAPOL::startPeriod (EAPOL state machine start period, in "
"seconds)\n"
" EAPOL::maxStart (EAPOL state machine maximum start "
"attempts)\n");
printf(" dot11RSNAConfigPMKLifetime (WPA/WPA2 PMK lifetime in "
"seconds)\n"
" dot11RSNAConfigPMKReauthThreshold (WPA/WPA2 reauthentication"
" threshold\n\tpercentage)\n"
" dot11RSNAConfigSATimeout (WPA/WPA2 timeout for completing "
"security\n\tassociation in seconds)\n");
}

static int wpa_cli_cmd_set(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char cmd[256];
int res;

if (argc == 0) {
wpa_cli_show_variables();
return 0;
}

if (argc != 1 && argc != 2) {
printf("Invalid SET command: needs two arguments (variable "
"name and value)\n");
return -1;
}

if (argc == 1)
res = os_snprintf(cmd, sizeof(cmd), "SET %s ", argv[0]);
else
res = os_snprintf(cmd, sizeof(cmd), "SET %s %s",
argv[0], argv[1]);
if (res < 0 || (size_t) res >= sizeof(cmd) - 1) {
printf("Too long SET command.\n");
return -1;
}
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_get(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "GET", 1, argc, argv);
}

static int wpa_cli_cmd_logoff(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "LOGOFF");
}

static int wpa_cli_cmd_logon(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "LOGON");
}

static int wpa_cli_cmd_reassociate(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "REASSOCIATE");
}

static int wpa_cli_cmd_preauthenticate(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "PREAUTH", 1, argc, argv);
}

static int wpa_cli_cmd_ap_scan(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "AP_SCAN", 1, argc, argv);
}

static int wpa_cli_cmd_scan_interval(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "SCAN_INTERVAL", 1, argc, argv);
}

static int wpa_cli_cmd_bss_expire_age(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "BSS_EXPIRE_AGE", 1, argc, argv);
}

static int wpa_cli_cmd_bss_expire_count(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "BSS_EXPIRE_COUNT", 1, argc, argv);
}

static int wpa_cli_cmd_bss_flush(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char cmd[256];
int res;

if (argc < 1)
res = os_snprintf(cmd, sizeof(cmd), "BSS_FLUSH 0");
else
res = os_snprintf(cmd, sizeof(cmd), "BSS_FLUSH %s", argv[0]);
if (res < 0 || (size_t) res >= sizeof(cmd) - 1) {
printf("Too long BSS_FLUSH command.\n");
return -1;
}
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_stkstart(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "STKSTART", 1, argc, argv);
}

static int wpa_cli_cmd_ft_ds(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "FT_DS", 1, argc, argv);
}

static int wpa_cli_cmd_wps_pbc(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "WPS_PBC", 0, argc, argv);
}

static int wpa_cli_cmd_wps_pin(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
if (argc == 0) {
printf("Invalid WPS_PIN command: need one or two arguments:\n"
"- BSSID: use 'any' to select any\n"
"- PIN: optional, used only with devices that have no "
"display\n");
return -1;
}

return wpa_cli_cmd(ctrl, "WPS_PIN", 1, argc, argv);
}

static int wpa_cli_cmd_wps_check_pin(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "WPS_CHECK_PIN", 1, argc, argv);
}

static int wpa_cli_cmd_wps_cancel(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "WPS_CANCEL");
}

#ifdef CONFIG_WPS_NFC

static int wpa_cli_cmd_wps_nfc(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "WPS_NFC", 0, argc, argv);
}

static int wpa_cli_cmd_wps_nfc_token(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "WPS_NFC_TOKEN", 1, argc, argv);
}

static int wpa_cli_cmd_wps_nfc_tag_read(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
int ret;
char *buf;
size_t buflen;

if (argc != 1) {
printf("Invalid 'wps_nfc_tag_read' command - one argument "
"is required.\n");
return -1;
}

buflen = 18 + os_strlen(argv[0]);
buf = os_malloc(buflen);
if (buf == NULL)
return -1;
os_snprintf(buf, buflen, "WPS_NFC_TAG_READ %s", argv[0]);

ret = wpa_ctrl_command(ctrl, buf);
os_free(buf);

return ret;
}

static int wpa_cli_cmd_nfc_get_handover_req(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "NFC_GET_HANDOVER_REQ", 2, argc, argv);
}

static int wpa_cli_cmd_nfc_get_handover_sel(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "NFC_GET_HANDOVER_SEL", 2, argc, argv);
}

static int wpa_cli_cmd_nfc_rx_handover_req(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
int ret;
char *buf;
size_t buflen;

if (argc != 1) {
printf("Invalid 'nfc_rx_handover_req' command - one argument "
"is required.\n");
return -1;
}

buflen = 21 + os_strlen(argv[0]);
buf = os_malloc(buflen);
if (buf == NULL)
return -1;
os_snprintf(buf, buflen, "NFC_RX_HANDOVER_REQ %s", argv[0]);

ret = wpa_ctrl_command(ctrl, buf);
os_free(buf);

return ret;
}

static int wpa_cli_cmd_nfc_rx_handover_sel(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
int ret;
char *buf;
size_t buflen;

if (argc != 1) {
printf("Invalid 'nfc_rx_handover_sel' command - one argument "
"is required.\n");
return -1;
}

buflen = 21 + os_strlen(argv[0]);
buf = os_malloc(buflen);
if (buf == NULL)
return -1;
os_snprintf(buf, buflen, "NFC_RX_HANDOVER_SEL %s", argv[0]);

ret = wpa_ctrl_command(ctrl, buf);
os_free(buf);

return ret;
}

#endif /* CONFIG_WPS_NFC */

static int wpa_cli_cmd_wps_reg(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char cmd[256];
int res;

if (argc == 2)
res = os_snprintf(cmd, sizeof(cmd), "WPS_REG %s %s",
argv[0], argv[1]);
else if (argc == 5 || argc == 6) {
char ssid_hex[2 * 32 + 1];
char key_hex[2 * 64 + 1];
int i;

ssid_hex[0] = '\0';
for (i = 0; i < 32; i++) {
if (argv[2][i] == '\0')
break;
os_snprintf(&ssid_hex[i * 2], 3, "%02x", argv[2][i]);
}

key_hex[0] = '\0';
if (argc == 6) {
for (i = 0; i < 64; i++) {
if (argv[5][i] == '\0')
break;
os_snprintf(&key_hex[i * 2], 3, "%02x",
argv[5][i]);
}
}

res = os_snprintf(cmd, sizeof(cmd),
"WPS_REG %s %s %s %s %s %s",
argv[0], argv[1], ssid_hex, argv[3], argv[4],
key_hex);
} else {
printf("Invalid WPS_REG command: need two arguments:\n"
"- BSSID of the target AP\n"
"- AP PIN\n");
printf("Alternatively, six arguments can be used to "
"reconfigure the AP:\n"
"- BSSID of the target AP\n"
"- AP PIN\n"
"- new SSID\n"
"- new auth (OPEN, WPAPSK, WPA2PSK)\n"
"- new encr (NONE, WEP, TKIP, CCMP)\n"
"- new key\n");
return -1;
}

if (res < 0 || (size_t) res >= sizeof(cmd) - 1) {
printf("Too long WPS_REG command.\n");
return -1;
}
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_wps_ap_pin(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "WPS_AP_PIN", 1, argc, argv);
}

static int wpa_cli_cmd_wps_er_start(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "WPS_ER_START", 0, argc, argv);
}

static int wpa_cli_cmd_wps_er_stop(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "WPS_ER_STOP");

}

static int wpa_cli_cmd_wps_er_pin(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc < 2) {
printf("Invalid WPS_ER_PIN command: need at least two "
"arguments:\n"
"- UUID: use 'any' to select any\n"
"- PIN: Enrollee PIN\n"
"optional: - Enrollee MAC address\n");
return -1;
}

return wpa_cli_cmd(ctrl, "WPS_ER_PIN", 2, argc, argv);
}

static int wpa_cli_cmd_wps_er_pbc(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "WPS_ER_PBC", 1, argc, argv);
}

static int wpa_cli_cmd_wps_er_learn(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc != 2) {
printf("Invalid WPS_ER_LEARN command: need two arguments:\n"
"- UUID: specify which AP to use\n"
"- PIN: AP PIN\n");
return -1;
}

return wpa_cli_cmd(ctrl, "WPS_ER_LEARN", 2, argc, argv);
}

static int wpa_cli_cmd_wps_er_set_config(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc != 2) {
printf("Invalid WPS_ER_SET_CONFIG command: need two "
"arguments:\n"
"- UUID: specify which AP to use\n"
"- Network configuration id\n");
return -1;
}

return wpa_cli_cmd(ctrl, "WPS_ER_SET_CONFIG", 2, argc, argv);
}

static int wpa_cli_cmd_wps_er_config(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[256];
int res;

if (argc == 5 || argc == 6) {
char ssid_hex[2 * 32 + 1];
char key_hex[2 * 64 + 1];
int i;

ssid_hex[0] = '\0';
for (i = 0; i < 32; i++) {
if (argv[2][i] == '\0')
break;
os_snprintf(&ssid_hex[i * 2], 3, "%02x", argv[2][i]);
}

key_hex[0] = '\0';
if (argc == 6) {
for (i = 0; i < 64; i++) {
if (argv[5][i] == '\0')
break;
os_snprintf(&key_hex[i * 2], 3, "%02x",
argv[5][i]);
}
}

res = os_snprintf(cmd, sizeof(cmd),
"WPS_ER_CONFIG %s %s %s %s %s %s",
argv[0], argv[1], ssid_hex, argv[3], argv[4],
key_hex);
} else {
printf("Invalid WPS_ER_CONFIG command: need six arguments:\n"
"- AP UUID\n"
"- AP PIN\n"
"- new SSID\n"
"- new auth (OPEN, WPAPSK, WPA2PSK)\n"
"- new encr (NONE, WEP, TKIP, CCMP)\n"
"- new key\n");
return -1;
}

if (res < 0 || (size_t) res >= sizeof(cmd) - 1) {
printf("Too long WPS_ER_CONFIG command.\n");
return -1;
}
return wpa_ctrl_command(ctrl, cmd);
}

#ifdef CONFIG_WPS_NFC
static int wpa_cli_cmd_wps_er_nfc_config_token(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc != 2) {
printf("Invalid WPS_ER_NFC_CONFIG_TOKEN command: need two "
"arguments:\n"
"- WPS/NDEF: token format\n"
"- UUID: specify which AP to use\n");
return -1;
}

return wpa_cli_cmd(ctrl, "WPS_ER_NFC_CONFIG_TOKEN", 2, argc, argv);
}
#endif /* CONFIG_WPS_NFC */

static int wpa_cli_cmd_ibss_rsn(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "IBSS_RSN", 1, argc, argv);
}

static int wpa_cli_cmd_level(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "LEVEL", 1, argc, argv);
}

static int wpa_cli_cmd_identity(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char cmd[256], *pos, *end;
int i, ret;

if (argc < 2) {
printf("Invalid IDENTITY command: needs two arguments "
"(network id and identity)\n");
return -1;
}

end = cmd + sizeof(cmd);
pos = cmd;
ret = os_snprintf(pos, end - pos, WPA_CTRL_RSP "IDENTITY-%s:%s",
argv[0], argv[1]);
if (ret < 0 || ret >= end - pos) {
printf("Too long IDENTITY command.\n");
return -1;
}
pos += ret;
for (i = 2; i < argc; i++) {
ret = os_snprintf(pos, end - pos, " %s", argv[i]);
if (ret < 0 || ret >= end - pos) {
printf("Too long IDENTITY command.\n");
return -1;
}
pos += ret;
}

return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_password(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char cmd[256], *pos, *end;
int i, ret;

if (argc < 2) {
printf("Invalid PASSWORD command: needs two arguments "
"(network id and password)\n");
return -1;
}

end = cmd + sizeof(cmd);
pos = cmd;
ret = os_snprintf(pos, end - pos, WPA_CTRL_RSP "PASSWORD-%s:%s",
argv[0], argv[1]);
if (ret < 0 || ret >= end - pos) {
printf("Too long PASSWORD command.\n");
return -1;
}
pos += ret;
for (i = 2; i < argc; i++) {
ret = os_snprintf(pos, end - pos, " %s", argv[i]);
if (ret < 0 || ret >= end - pos) {
printf("Too long PASSWORD command.\n");
return -1;
}
pos += ret;
}

return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_new_password(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[256], *pos, *end;
int i, ret;

if (argc < 2) {
printf("Invalid NEW_PASSWORD command: needs two arguments "
"(network id and password)\n");
return -1;
}

end = cmd + sizeof(cmd);
pos = cmd;
ret = os_snprintf(pos, end - pos, WPA_CTRL_RSP "NEW_PASSWORD-%s:%s",
argv[0], argv[1]);
if (ret < 0 || ret >= end - pos) {
printf("Too long NEW_PASSWORD command.\n");
return -1;
}
pos += ret;
for (i = 2; i < argc; i++) {
ret = os_snprintf(pos, end - pos, " %s", argv[i]);
if (ret < 0 || ret >= end - pos) {
printf("Too long NEW_PASSWORD command.\n");
return -1;
}
pos += ret;
}

return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_pin(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char cmd[256], *pos, *end;
int i, ret;

if (argc < 2) {
printf("Invalid PIN command: needs two arguments "
"(network id and pin)\n");
return -1;
}

end = cmd + sizeof(cmd);
pos = cmd;
ret = os_snprintf(pos, end - pos, WPA_CTRL_RSP "PIN-%s:%s",
argv[0], argv[1]);
if (ret < 0 || ret >= end - pos) {
printf("Too long PIN command.\n");
return -1;
}
pos += ret;
for (i = 2; i < argc; i++) {
ret = os_snprintf(pos, end - pos, " %s", argv[i]);
if (ret < 0 || ret >= end - pos) {
printf("Too long PIN command.\n");
return -1;
}
pos += ret;
}
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_otp(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char cmd[256], *pos, *end;
int i, ret;

if (argc < 2) {
printf("Invalid OTP command: needs two arguments (network "
"id and password)\n");
return -1;
}

end = cmd + sizeof(cmd);
pos = cmd;
ret = os_snprintf(pos, end - pos, WPA_CTRL_RSP "OTP-%s:%s",
argv[0], argv[1]);
if (ret < 0 || ret >= end - pos) {
printf("Too long OTP command.\n");
return -1;
}
pos += ret;
for (i = 2; i < argc; i++) {
ret = os_snprintf(pos, end - pos, " %s", argv[i]);
if (ret < 0 || ret >= end - pos) {
printf("Too long OTP command.\n");
return -1;
}
pos += ret;
}

return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_passphrase(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[256], *pos, *end;
int i, ret;

if (argc < 2) {
printf("Invalid PASSPHRASE command: needs two arguments "
"(network id and passphrase)\n");
return -1;
}

end = cmd + sizeof(cmd);
pos = cmd;
ret = os_snprintf(pos, end - pos, WPA_CTRL_RSP "PASSPHRASE-%s:%s",
argv[0], argv[1]);
if (ret < 0 || ret >= end - pos) {
printf("Too long PASSPHRASE command.\n");
return -1;
}
pos += ret;
for (i = 2; i < argc; i++) {
ret = os_snprintf(pos, end - pos, " %s", argv[i]);
if (ret < 0 || ret >= end - pos) {
printf("Too long PASSPHRASE command.\n");
return -1;
}
pos += ret;
}

return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_bssid(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
if (argc < 2) {
printf("Invalid BSSID command: needs two arguments (network "
"id and BSSID)\n");
return -1;
}

return wpa_cli_cmd(ctrl, "BSSID", 2, argc, argv);
}

static int wpa_cli_cmd_blacklist(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "BLACKLIST", 0, argc, argv);
}

static int wpa_cli_cmd_log_level(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "LOG_LEVEL", 0, argc, argv);
}

static int wpa_cli_cmd_list_networks(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "LIST_NETWORKS");
}

static int wpa_cli_cmd_select_network(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "SELECT_NETWORK", 1, argc, argv);
}

static int wpa_cli_cmd_enable_network(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "ENABLE_NETWORK", 1, argc, argv);
}

static int wpa_cli_cmd_disable_network(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "DISABLE_NETWORK", 1, argc, argv);
}

static int wpa_cli_cmd_add_network(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "ADD_NETWORK");
}

static int wpa_cli_cmd_remove_network(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "REMOVE_NETWORK", 1, argc, argv);
}

static void wpa_cli_show_network_variables(void)
{
printf("set_network variables:\n"
" ssid (network name, SSID)\n"
" psk (WPA passphrase or pre-shared key)\n"
" key_mgmt (key management protocol)\n"
" identity (EAP identity)\n"
" password (EAP password)\n"
" ...\n"
"\n"
"Note: Values are entered in the same format as the "
"configuration file is using,\n"
"i.e., strings values need to be inside double quotation "
"marks.\n"
"For example: set_network 1 ssid \"network name\"\n"
"\n"
"Please see wpa_supplicant.conf documentation for full list "
"of\navailable variables.\n");
}

static int wpa_cli_cmd_set_network(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc == 0) {
wpa_cli_show_network_variables();
return 0;
}

if (argc < 3) {
printf("Invalid SET_NETWORK command: needs three arguments\n"
"(network id, variable name, and value)\n");
return -1;
}

return wpa_cli_cmd(ctrl, "SET_NETWORK", 3, argc, argv);
}

static int wpa_cli_cmd_get_network(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc == 0) {
wpa_cli_show_network_variables();
return 0;
}

if (argc != 2) {
printf("Invalid GET_NETWORK command: needs two arguments\n"
"(network id and variable name)\n");
return -1;
}

return wpa_cli_cmd(ctrl, "GET_NETWORK", 2, argc, argv);
}

static int wpa_cli_cmd_list_creds(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "LIST_CREDS");
}

static int wpa_cli_cmd_add_cred(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "ADD_CRED");
}

static int wpa_cli_cmd_remove_cred(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "REMOVE_CRED", 1, argc, argv);
}

static int wpa_cli_cmd_set_cred(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
if (argc != 3) {
printf("Invalid SET_CRED command: needs three arguments\n"
"(cred id, variable name, and value)\n");
return -1;
}

return wpa_cli_cmd(ctrl, "SET_CRED", 3, argc, argv);
}

static int wpa_cli_cmd_disconnect(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "DISCONNECT");
}

static int wpa_cli_cmd_reconnect(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "RECONNECT");
}

static int wpa_cli_cmd_save_config(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "SAVE_CONFIG");
}

static int wpa_cli_cmd_scan(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "SCAN");
}

static int wpa_cli_cmd_scan_results(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "SCAN_RESULTS");
}

static int wpa_cli_cmd_bss(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "BSS", 1, argc, argv);
}

static char ** wpa_cli_complete_bss(const char *str, int pos)
{
int arg = get_cmd_arg_num(str, pos);
char **res = NULL;

switch (arg) {
case 1:
res = cli_txt_list_array(&bsses);
break;
}

return res;
}

static int wpa_cli_cmd_get_capability(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc < 1 || argc > 2) {
printf("Invalid GET_CAPABILITY command: need either one or "
"two arguments\n");
return -1;
}

if ((argc == 2) && os_strcmp(argv[1], "strict") != 0) {
printf("Invalid GET_CAPABILITY command: second argument, "
"if any, must be 'strict'\n");
return -1;
}

return wpa_cli_cmd(ctrl, "GET_CAPABILITY", 1, argc, argv);
}

static int wpa_cli_list_interfaces(struct wpa_ctrl *ctrl)
{
printf("Available interfaces:\n");
return wpa_ctrl_command(ctrl, "INTERFACES");
}

static int wpa_cli_cmd_interface(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
if (argc < 1) {
wpa_cli_list_interfaces(ctrl);
return 0;
}

wpa_cli_close_connection();
os_free(ctrl_ifname);
ctrl_ifname = os_strdup(argv[0]);

if (wpa_cli_open_connection(ctrl_ifname, 1)) {
printf("Connected to interface '%s.\n", ctrl_ifname);
} else {
printf("Could not connect to interface '%s' - re-trying\n",
ctrl_ifname);
}
return 0;
}

static int wpa_cli_cmd_reconfigure(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "RECONFIGURE");
}

static int wpa_cli_cmd_terminate(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "TERMINATE");
}

static int wpa_cli_cmd_interface_add(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[256];
int res;

if (argc < 1) {
printf("Invalid INTERFACE_ADD command: needs at least one "
"argument (interface name)\n"
"All arguments: ifname confname driver ctrl_interface "
"driver_param bridge_name\n");
return -1;
}

/*
* INTERFACE_ADD TABTABTABTAB
* TAB
*/
res = os_snprintf(cmd, sizeof(cmd),
"INTERFACE_ADD %s\t%s\t%s\t%s\t%s\t%s",
argv[0],
argc > 1 ? argv[1] : "", argc > 2 ? argv[2] : "",
argc > 3 ? argv[3] : "", argc > 4 ? argv[4] : "",
argc > 5 ? argv[5] : "");
if (res < 0 || (size_t) res >= sizeof(cmd))
return -1;
cmd[sizeof(cmd) - 1] = '\0';
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_interface_remove(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "INTERFACE_REMOVE", 1, argc, argv);
}

static int wpa_cli_cmd_interface_list(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "INTERFACE_LIST");
}

#ifdef CONFIG_AP
static int wpa_cli_cmd_sta(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "STA", 1, argc, argv);
}

static int wpa_ctrl_command_sta(struct wpa_ctrl *ctrl, char *cmd,
char *addr, size_t addr_len)
{
char buf[4096], *pos;
size_t len;
int ret;

if (ctrl_conn == NULL) {
printf("Not connected to hostapd - command dropped.\n");
return -1;
}
len = sizeof(buf) - 1;
ret = wpa_ctrl_request(ctrl, cmd, os_strlen(cmd), buf, &len,
wpa_cli_msg_cb);
if (ret == -2) {
printf("'%s' command timed out.\n", cmd);
return -2;
} else if (ret < 0) {
printf("'%s' command failed.\n", cmd);
return -1;
}

buf[len] = '\0';
if (os_memcmp(buf, "FAIL", 4) == 0)
return -1;
printf("%s", buf);

pos = buf;
while (*pos != '\0' && *pos != '\n')
pos++;
*pos = '\0';
os_strlcpy(addr, buf, addr_len);
return 0;
}

static int wpa_cli_cmd_all_sta(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char addr[32], cmd[64];

if (wpa_ctrl_command_sta(ctrl, "STA-FIRST", addr, sizeof(addr)))
return 0;
do {
os_snprintf(cmd, sizeof(cmd), "STA-NEXT %s", addr);
} while (wpa_ctrl_command_sta(ctrl, cmd, addr, sizeof(addr)) == 0);

return -1;
}

static int wpa_cli_cmd_deauthenticate(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "DEAUTHENTICATE", 1, argc, argv);
}

static int wpa_cli_cmd_disassociate(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "DISASSOCIATE", 1, argc, argv);
}
#endif /* CONFIG_AP */

static int wpa_cli_cmd_suspend(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "SUSPEND");
}

static int wpa_cli_cmd_resume(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "RESUME");
}

static int wpa_cli_cmd_drop_sa(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "DROP_SA");
}

static int wpa_cli_cmd_roam(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "ROAM", 1, argc, argv);
}

#ifdef CONFIG_P2P

static int wpa_cli_cmd_p2p_find(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_FIND", 0, argc, argv);
}

static char ** wpa_cli_complete_p2p_find(const char *str, int pos)
{
char **res = NULL;
int arg = get_cmd_arg_num(str, pos);

res = os_calloc(6, sizeof(char *));
if (res == NULL)
return NULL;
res[0] = os_strdup("type=social");
if (res[0] == NULL) {
os_free(res);
return NULL;
}
res[1] = os_strdup("type=progressive");
if (res[1] == NULL)
return res;
res[2] = os_strdup("delay=");
if (res[2] == NULL)
return res;
res[3] = os_strdup("dev_id=");
if (res[3] == NULL)
return res;
if (arg == 1)
res[4] = os_strdup("[timeout]");

return res;
}

static int wpa_cli_cmd_p2p_stop_find(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "P2P_STOP_FIND");
}

static int wpa_cli_cmd_p2p_connect(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_CONNECT", 2, argc, argv);
}

static char ** wpa_cli_complete_p2p_connect(const char *str, int pos)
{
int arg = get_cmd_arg_num(str, pos);
char **res = NULL;

switch (arg) {
case 1:
res = cli_txt_list_array(&p2p_peers);
break;
}

return res;
}

static int wpa_cli_cmd_p2p_listen(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_LISTEN", 0, argc, argv);
}

static int wpa_cli_cmd_p2p_group_remove(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_GROUP_REMOVE", 1, argc, argv);
}

static char ** wpa_cli_complete_p2p_group_remove(const char *str, int pos)
{
int arg = get_cmd_arg_num(str, pos);
char **res = NULL;

switch (arg) {
case 1:
res = cli_txt_list_array(&p2p_groups);
break;
}

return res;
}

static int wpa_cli_cmd_p2p_group_add(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_GROUP_ADD", 0, argc, argv);
}

static int wpa_cli_cmd_p2p_prov_disc(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc != 2 && argc != 3) {
printf("Invalid P2P_PROV_DISC command: needs at least "
"two arguments, address and config method\n"
"(display, keypad, or pbc) and an optional join\n");
return -1;
}

return wpa_cli_cmd(ctrl, "P2P_PROV_DISC", 2, argc, argv);
}

static int wpa_cli_cmd_p2p_get_passphrase(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "P2P_GET_PASSPHRASE");
}

static int wpa_cli_cmd_p2p_serv_disc_req(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[4096];

if (argc != 2 && argc != 4) {
printf("Invalid P2P_SERV_DISC_REQ command: needs two "
"arguments (address and TLVs) or four arguments "
"(address, \"upnp\", version, search target "
"(SSDP ST:)\n");
return -1;
}

if (write_cmd(cmd, sizeof(cmd), "P2P_SERV_DISC_REQ", argc, argv) < 0)
return -1;
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_p2p_serv_disc_cancel_req(struct wpa_ctrl *ctrl,
int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_SERV_DISC_CANCEL_REQ", 1, argc, argv);
}

static int wpa_cli_cmd_p2p_serv_disc_resp(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[4096];
int res;

if (argc != 4) {
printf("Invalid P2P_SERV_DISC_RESP command: needs four "
"arguments (freq, address, dialog token, and TLVs)\n");
return -1;
}

res = os_snprintf(cmd, sizeof(cmd), "P2P_SERV_DISC_RESP %s %s %s %s",
argv[0], argv[1], argv[2], argv[3]);
if (res < 0 || (size_t) res >= sizeof(cmd))
return -1;
cmd[sizeof(cmd) - 1] = '\0';
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_p2p_service_update(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "P2P_SERVICE_UPDATE");
}

static int wpa_cli_cmd_p2p_serv_disc_external(struct wpa_ctrl *ctrl,
int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_SERV_DISC_EXTERNAL", 1, argc, argv);
}

static int wpa_cli_cmd_p2p_service_flush(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "P2P_SERVICE_FLUSH");
}

static int wpa_cli_cmd_p2p_service_add(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[4096];
int res;

if (argc != 3 && argc != 4) {
printf("Invalid P2P_SERVICE_ADD command: needs three or four "
"arguments\n");
return -1;
}

if (argc == 4)
res = os_snprintf(cmd, sizeof(cmd),
"P2P_SERVICE_ADD %s %s %s %s",
argv[0], argv[1], argv[2], argv[3]);
else
res = os_snprintf(cmd, sizeof(cmd),
"P2P_SERVICE_ADD %s %s %s",
argv[0], argv[1], argv[2]);
if (res < 0 || (size_t) res >= sizeof(cmd))
return -1;
cmd[sizeof(cmd) - 1] = '\0';
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_p2p_service_del(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[4096];
int res;

if (argc != 2 && argc != 3) {
printf("Invalid P2P_SERVICE_DEL command: needs two or three "
"arguments\n");
return -1;
}

if (argc == 3)
res = os_snprintf(cmd, sizeof(cmd),
"P2P_SERVICE_DEL %s %s %s",
argv[0], argv[1], argv[2]);
else
res = os_snprintf(cmd, sizeof(cmd),
"P2P_SERVICE_DEL %s %s",
argv[0], argv[1]);
if (res < 0 || (size_t) res >= sizeof(cmd))
return -1;
cmd[sizeof(cmd) - 1] = '\0';
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_p2p_reject(struct wpa_ctrl *ctrl,
int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_REJECT", 1, argc, argv);
}

static int wpa_cli_cmd_p2p_invite(struct wpa_ctrl *ctrl,
int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_INVITE", 1, argc, argv);
}

static int wpa_cli_cmd_p2p_peer(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_PEER", 1, argc, argv);
}

static char ** wpa_cli_complete_p2p_peer(const char *str, int pos)
{
int arg = get_cmd_arg_num(str, pos);
char **res = NULL;

switch (arg) {
case 1:
res = cli_txt_list_array(&p2p_peers);
break;
}

return res;
}

static int wpa_ctrl_command_p2p_peer(struct wpa_ctrl *ctrl, char *cmd,
char *addr, size_t addr_len,
int discovered)
{
char buf[4096], *pos;
size_t len;
int ret;

if (ctrl_conn == NULL)
return -1;
len = sizeof(buf) - 1;
ret = wpa_ctrl_request(ctrl, cmd, os_strlen(cmd), buf, &len,
wpa_cli_msg_cb);
if (ret == -2) {
printf("'%s' command timed out.\n", cmd);
return -2;
} else if (ret < 0) {
printf("'%s' command failed.\n", cmd);
return -1;
}

buf[len] = '\0';
if (os_memcmp(buf, "FAIL", 4) == 0)
return -1;

pos = buf;
while (*pos != '\0' && *pos != '\n')
pos++;
*pos++ = '\0';
os_strlcpy(addr, buf, addr_len);
if (!discovered || os_strstr(pos, "[PROBE_REQ_ONLY]") == NULL)
printf("%s\n", addr);
return 0;
}

static int wpa_cli_cmd_p2p_peers(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
char addr[32], cmd[64];
int discovered;

discovered = argc > 0 && os_strcmp(argv[0], "discovered") == 0;

if (wpa_ctrl_command_p2p_peer(ctrl, "P2P_PEER FIRST",
addr, sizeof(addr), discovered))
return -1;
do {
os_snprintf(cmd, sizeof(cmd), "P2P_PEER NEXT-%s", addr);
} while (wpa_ctrl_command_p2p_peer(ctrl, cmd, addr, sizeof(addr),
discovered) == 0);

return 0;
}

static int wpa_cli_cmd_p2p_set(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_SET", 2, argc, argv);
}

static int wpa_cli_cmd_p2p_flush(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_ctrl_command(ctrl, "P2P_FLUSH");
}

static int wpa_cli_cmd_p2p_cancel(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "P2P_CANCEL");
}

static int wpa_cli_cmd_p2p_unauthorize(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "P2P_UNAUTHORIZE", 1, argc, argv);
}

static int wpa_cli_cmd_p2p_presence_req(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc != 0 && argc != 2 && argc != 4) {
printf("Invalid P2P_PRESENCE_REQ command: needs two arguments "
"(preferred duration, interval; in microsecods).\n"
"Optional second pair can be used to provide "
"acceptable values.\n");
return -1;
}

return wpa_cli_cmd(ctrl, "P2P_PRESENCE_REQ", 0, argc, argv);
}

static int wpa_cli_cmd_p2p_ext_listen(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
if (argc != 0 && argc != 2) {
printf("Invalid P2P_EXT_LISTEN command: needs two arguments "
"(availability period, availability interval; in "
"millisecods).\n"
"Extended Listen Timing can be cancelled with this "
"command when used without parameters.\n");
return -1;
}

return wpa_cli_cmd(ctrl, "P2P_EXT_LISTEN", 0, argc, argv);
}

#endif /* CONFIG_P2P */

#ifdef CONFIG_WIFI_DISPLAY

static int wpa_cli_cmd_wfd_subelem_set(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[100];
int res;

if (argc != 1 && argc != 2) {
printf("Invalid WFD_SUBELEM_SET command: needs one or two "
"arguments (subelem, hexdump)\n");
return -1;
}

res = os_snprintf(cmd, sizeof(cmd), "WFD_SUBELEM_SET %s %s",
argv[0], argc > 1 ? argv[1] : "");
if (res < 0 || (size_t) res >= sizeof(cmd))
return -1;
cmd[sizeof(cmd) - 1] = '\0';
return wpa_ctrl_command(ctrl, cmd);
}

static int wpa_cli_cmd_wfd_subelem_get(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[100];
int res;

if (argc != 1) {
printf("Invalid WFD_SUBELEM_GET command: needs one "
"argument (subelem)\n");
return -1;
}

res = os_snprintf(cmd, sizeof(cmd), "WFD_SUBELEM_GET %s",
argv[0]);
if (res < 0 || (size_t) res >= sizeof(cmd))
return -1;
cmd[sizeof(cmd) - 1] = '\0';
return wpa_ctrl_command(ctrl, cmd);
}
#endif /* CONFIG_WIFI_DISPLAY */

#ifdef CONFIG_INTERWORKING
static int wpa_cli_cmd_fetch_anqp(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "FETCH_ANQP");
}

static int wpa_cli_cmd_stop_fetch_anqp(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "STOP_FETCH_ANQP");
}

static int wpa_cli_cmd_interworking_select(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "INTERWORKING_SELECT", 0, argc, argv);
}

static int wpa_cli_cmd_interworking_connect(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "INTERWORKING_CONNECT", 1, argc, argv);
}

static int wpa_cli_cmd_anqp_get(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "ANQP_GET", 2, argc, argv);
}

static int wpa_cli_cmd_gas_request(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "GAS_REQUEST", 2, argc, argv);
}

static int wpa_cli_cmd_gas_response_get(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "GAS_RESPONSE_GET", 2, argc, argv);
}
#endif /* CONFIG_INTERWORKING */

#ifdef CONFIG_HS20

static int wpa_cli_cmd_hs20_anqp_get(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "HS20_ANQP_GET", 2, argc, argv);
}

static int wpa_cli_cmd_get_nai_home_realm_list(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
char cmd[512];

if (argc == 0) {
printf("Command needs one or two arguments (dst mac addr and "
"optional home realm)\n");
return -1;
}

if (write_cmd(cmd, sizeof(cmd), "HS20_GET_NAI_HOME_REALM_LIST",
argc, argv) < 0)
return -1;

return wpa_ctrl_command(ctrl, cmd);
}

#endif /* CONFIG_HS20 */

static int wpa_cli_cmd_sta_autoconnect(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "STA_AUTOCONNECT", 1, argc, argv);
}

static int wpa_cli_cmd_tdls_discover(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "TDLS_DISCOVER", 1, argc, argv);
}

static int wpa_cli_cmd_tdls_setup(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "TDLS_SETUP", 1, argc, argv);
}

static int wpa_cli_cmd_tdls_teardown(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_cli_cmd(ctrl, "TDLS_TEARDOWN", 1, argc, argv);
}

static int wpa_cli_cmd_signal_poll(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "SIGNAL_POLL");
}

static int wpa_cli_cmd_pktcnt_poll(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "PKTCNT_POLL");
}

static int wpa_cli_cmd_reauthenticate(struct wpa_ctrl *ctrl, int argc,
char *argv[])
{
return wpa_ctrl_command(ctrl, "REAUTHENTICATE");
}

#ifdef CONFIG_AUTOSCAN

static int wpa_cli_cmd_autoscan(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
if (argc == 0)
return wpa_ctrl_command(ctrl, "AUTOSCAN ");

return wpa_cli_cmd(ctrl, "AUTOSCAN", 0, argc, argv);
}

#endif /* CONFIG_AUTOSCAN */

#ifdef CONFIG_WNM

static int wpa_cli_cmd_wnm_sleep(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
return wpa_cli_cmd(ctrl, "WNM_SLEEP", 0, argc, argv);
}

#endif /* CONFIG_WNM */

static int wpa_cli_cmd_raw(struct wpa_ctrl *ctrl, int argc, char *argv[])
{
if (argc == 0)
return -1;
return wpa_cli_cmd(ctrl, argv[0], 0, argc - 1, &argv[1]);
}

enum wpa_cli_cmd_flags {
cli_cmd_flag_none = 0x00,
cli_cmd_flag_sensitive = 0x01
};

struct wpa_cli_cmd {
const char *cmd;
int (*handler)(struct wpa_ctrl *ctrl, int argc, char *argv[]);
char ** (*completion)(const char *str, int pos);
enum wpa_cli_cmd_flags flags;
const char *usage;
};

static struct wpa_cli_cmd wpa_cli_commands[] = {
{ "status", wpa_cli_cmd_status, NULL,
cli_cmd_flag_none,
"[verbose] = get current WPA/EAPOL/EAP status" },
{ "ifname", wpa_cli_cmd_ifname, NULL,
cli_cmd_flag_none,
"= get current interface name" },
{ "ping", wpa_cli_cmd_ping, NULL,
cli_cmd_flag_none,
"= pings wpa_supplicant" },
{ "relog", wpa_cli_cmd_relog, NULL,
cli_cmd_flag_none,
"= re-open log-file (allow rolling logs)" },
{ "note", wpa_cli_cmd_note, NULL,
cli_cmd_flag_none,
" = add a note to wpa_supplicant debug log" },
{ "mib", wpa_cli_cmd_mib, NULL,
cli_cmd_flag_none,
"= get MIB variables (dot1x, dot11)" },
{ "help", wpa_cli_cmd_help, wpa_cli_complete_help,
cli_cmd_flag_none,
"[command] = show usage help" },
{ "interface", wpa_cli_cmd_interface, NULL,
cli_cmd_flag_none,
"[ifname] = show interfaces/select interface" },
{ "level", wpa_cli_cmd_level, NULL,
cli_cmd_flag_none,
" = change debug level" },
{ "license", wpa_cli_cmd_license, NULL,
cli_cmd_flag_none,
"= show full wpa_cli license" },
{ "quit", wpa_cli_cmd_quit, NULL,
cli_cmd_flag_none,
"= exit wpa_cli" },
{ "set", wpa_cli_cmd_set, NULL,
cli_cmd_flag_none,
"= set variables (shows list of variables when run without "
"arguments)" },
{ "get", wpa_cli_cmd_get, NULL,
cli_cmd_flag_none,
" = get information" },
{ "logon", wpa_cli_cmd_logon, NULL,
cli_cmd_flag_none,
"= IEEE 802.1X EAPOL state machine logon" },
{ "logoff", wpa_cli_cmd_logoff, NULL,
cli_cmd_flag_none,
"= IEEE 802.1X EAPOL state machine logoff" },
{ "pmksa", wpa_cli_cmd_pmksa, NULL,
cli_cmd_flag_none,
"= show PMKSA cache" },
{ "reassociate", wpa_cli_cmd_reassociate, NULL,
cli_cmd_flag_none,
"= force reassociation" },
{ "preauthenticate", wpa_cli_cmd_preauthenticate, wpa_cli_complete_bss,
cli_cmd_flag_none,
" = force preauthentication" },
{ "identity", wpa_cli_cmd_identity, NULL,
cli_cmd_flag_none,
" = configure identity for an SSID" },
{ "password", wpa_cli_cmd_password, NULL,
cli_cmd_flag_sensitive,
" = configure password for an SSID" },
{ "new_password", wpa_cli_cmd_new_password, NULL,
cli_cmd_flag_sensitive,
" = change password for an SSID" },
{ "pin", wpa_cli_cmd_pin, NULL,
cli_cmd_flag_sensitive,
" = configure pin for an SSID" },
{ "otp", wpa_cli_cmd_otp, NULL,
cli_cmd_flag_sensitive,
" = configure one-time-password for an SSID"
},
{ "passphrase", wpa_cli_cmd_passphrase, NULL,
cli_cmd_flag_sensitive,
" = configure private key passphrase\n"
" for an SSID" },
{ "bssid", wpa_cli_cmd_bssid, NULL,
cli_cmd_flag_none,
" = set preferred BSSID for an SSID" },
{ "blacklist", wpa_cli_cmd_blacklist, wpa_cli_complete_bss,
cli_cmd_flag_none,
" = add a BSSID to the blacklist\n"
"blacklist clear = clear the blacklist\n"
"blacklist = display the blacklist" },
{ "log_level", wpa_cli_cmd_log_level, NULL,
cli_cmd_flag_none,
" [] = update the log level/timestamp\n"
"log_level = display the current log level and log options" },
{ "list_networks", wpa_cli_cmd_list_networks, NULL,
cli_cmd_flag_none,
"= list configured networks" },
{ "select_network", wpa_cli_cmd_select_network, NULL,
cli_cmd_flag_none,
" = select a network (disable others)" },
{ "enable_network", wpa_cli_cmd_enable_network, NULL,
cli_cmd_flag_none,
" = enable a network" },
{ "disable_network", wpa_cli_cmd_disable_network, NULL,
cli_cmd_flag_none,
" = disable a network" },
{ "add_network", wpa_cli_cmd_add_network, NULL,
cli_cmd_flag_none,
"= add a network" },
{ "remove_network", wpa_cli_cmd_remove_network, NULL,
cli_cmd_flag_none,
" = remove a network" },
{ "set_network", wpa_cli_cmd_set_network, NULL,
cli_cmd_flag_sensitive,
" = set network variables (shows\n"
" list of variables when run without arguments)" },
{ "get_network", wpa_cli_cmd_get_network, NULL,
cli_cmd_flag_none,
" = get network variables" },
{ "list_creds", wpa_cli_cmd_list_creds, NULL,
cli_cmd_flag_none,
"= list configured credentials" },
{ "add_cred", wpa_cli_cmd_add_cred, NULL,
cli_cmd_flag_none,
"= add a credential" },
{ "remove_cred", wpa_cli_cmd_remove_cred, NULL,
cli_cmd_flag_none,
" = remove a credential" },
{ "set_cred", wpa_cli_cmd_set_cred, NULL,
cli_cmd_flag_sensitive,
" = set credential variables" },
{ "save_config", wpa_cli_cmd_save_config, NULL,
cli_cmd_flag_none,
"= save the current configuration" },
{ "disconnect", wpa_cli_cmd_disconnect, NULL,
cli_cmd_flag_none,
"= disconnect and wait for reassociate/reconnect command before\n"
" connecting" },
{ "reconnect", wpa_cli_cmd_reconnect, NULL,
cli_cmd_flag_none,
"= like reassociate, but only takes effect if already disconnected"
},
{ "scan", wpa_cli_cmd_scan, NULL,
cli_cmd_flag_none,
"= request new BSS scan" },
{ "scan_results", wpa_cli_cmd_scan_results, NULL,
cli_cmd_flag_none,
"= get latest scan results" },
{ "bss", wpa_cli_cmd_bss, wpa_cli_complete_bss,
cli_cmd_flag_none,
"< | > = get detailed scan result info" },
{ "get_capability", wpa_cli_cmd_get_capability, NULL,
cli_cmd_flag_none,
" "
"= get capabilies" },
{ "reconfigure", wpa_cli_cmd_reconfigure, NULL,
cli_cmd_flag_none,
"= force wpa_supplicant to re-read its configuration file" },
{ "terminate", wpa_cli_cmd_terminate, NULL,
cli_cmd_flag_none,
"= terminate wpa_supplicant" },
{ "interface_add", wpa_cli_cmd_interface_add, NULL,
cli_cmd_flag_none,
" \n"
" = adds new interface, all parameters but \n"
" are optional" },
{ "interface_remove", wpa_cli_cmd_interface_remove, NULL,
cli_cmd_flag_none,
" = removes the interface" },
{ "interface_list", wpa_cli_cmd_interface_list, NULL,
cli_cmd_flag_none,
"= list available interfaces" },
{ "ap_scan", wpa_cli_cmd_ap_scan, NULL,
cli_cmd_flag_none,
" = set ap_scan parameter" },
{ "scan_interval", wpa_cli_cmd_scan_interval, NULL,
cli_cmd_flag_none,
" = set scan_interval parameter (in seconds)" },
{ "bss_expire_age", wpa_cli_cmd_bss_expire_age, NULL,
cli_cmd_flag_none,
" = set BSS expiration age parameter" },
{ "bss_expire_count", wpa_cli_cmd_bss_expire_count, NULL,
cli_cmd_flag_none,
" = set BSS expiration scan count parameter" },
{ "bss_flush", wpa_cli_cmd_bss_flush, NULL,
cli_cmd_flag_none,
" = set BSS flush age (0 by default)" },
{ "stkstart", wpa_cli_cmd_stkstart, NULL,
cli_cmd_flag_none,
" = request STK negotiation with " },
{ "ft_ds", wpa_cli_cmd_ft_ds, wpa_cli_complete_bss,
cli_cmd_flag_none,
" = request over-the-DS FT with " },
{ "wps_pbc", wpa_cli_cmd_wps_pbc, wpa_cli_complete_bss,
cli_cmd_flag_none,
"[BSSID] = start Wi-Fi Protected Setup: Push Button Configuration" },
{ "wps_pin", wpa_cli_cmd_wps_pin, wpa_cli_complete_bss,
cli_cmd_flag_sensitive,
" [PIN] = start WPS PIN method (returns PIN, if not "
"hardcoded)" },
{ "wps_check_pin", wpa_cli_cmd_wps_check_pin, NULL,
cli_cmd_flag_sensitive,
" = verify PIN checksum" },
{ "wps_cancel", wpa_cli_cmd_wps_cancel, NULL, cli_cmd_flag_none,
"Cancels the pending WPS operation" },
#ifdef CONFIG_WPS_NFC
{ "wps_nfc", wpa_cli_cmd_wps_nfc, wpa_cli_complete_bss,
cli_cmd_flag_none,
"[BSSID] = start Wi-Fi Protected Setup: NFC" },
{ "wps_nfc_token", wpa_cli_cmd_wps_nfc_token, NULL,
cli_cmd_flag_none,
" = create password token" },
{ "wps_nfc_tag_read", wpa_cli_cmd_wps_nfc_tag_read, NULL,
cli_cmd_flag_sensitive,
" = report read NFC tag with WPS data" },
{ "nfc_get_handover_req", wpa_cli_cmd_nfc_get_handover_req, NULL,
cli_cmd_flag_none,
" = create NFC handover request" },
{ "nfc_get_handover_sel", wpa_cli_cmd_nfc_get_handover_sel, NULL,
cli_cmd_flag_none,
" = create NFC handover select" },
{ "nfc_rx_handover_req", wpa_cli_cmd_nfc_rx_handover_req, NULL,
cli_cmd_flag_none,
" = report received NFC handover request" },
{ "nfc_rx_handover_sel", wpa_cli_cmd_nfc_rx_handover_sel, NULL,
cli_cmd_flag_none,
" = report received NFC handover select" },
#endif /* CONFIG_WPS_NFC */
{ "wps_reg", wpa_cli_cmd_wps_reg, wpa_cli_complete_bss,
cli_cmd_flag_sensitive,
" = start WPS Registrar to configure an AP" },
{ "wps_ap_pin", wpa_cli_cmd_wps_ap_pin, NULL,
cli_cmd_flag_sensitive,
"[params..] = enable/disable AP PIN" },
{ "wps_er_start", wpa_cli_cmd_wps_er_start, NULL,
cli_cmd_flag_none,
"[IP address] = start Wi-Fi Protected Setup External Registrar" },
{ "wps_er_stop", wpa_cli_cmd_wps_er_stop, NULL,
cli_cmd_flag_none,
"= stop Wi-Fi Protected Setup External Registrar" },
{ "wps_er_pin", wpa_cli_cmd_wps_er_pin, NULL,
cli_cmd_flag_sensitive,
" = add an Enrollee PIN to External Registrar" },
{ "wps_er_pbc", wpa_cli_cmd_wps_er_pbc, NULL,
cli_cmd_flag_none,
" = accept an Enrollee PBC using External Registrar" },
{ "wps_er_learn", wpa_cli_cmd_wps_er_learn, NULL,
cli_cmd_flag_sensitive,
" = learn AP configuration" },
{ "wps_er_set_config", wpa_cli_cmd_wps_er_set_config, NULL,
cli_cmd_flag_none,
" = set AP configuration for enrolling" },
{ "wps_er_config", wpa_cli_cmd_wps_er_config, NULL,
cli_cmd_flag_sensitive,
" = configure AP" },
#ifdef CONFIG_WPS_NFC
{ "wps_er_nfc_config_token", wpa_cli_cmd_wps_er_nfc_config_token, NULL,
cli_cmd_flag_none,
" = build NFC configuration token" },
#endif /* CONFIG_WPS_NFC */
{ "ibss_rsn", wpa_cli_cmd_ibss_rsn, NULL,
cli_cmd_flag_none,
" = request RSN authentication with in IBSS" },
#ifdef CONFIG_AP
{ "sta", wpa_cli_cmd_sta, NULL,
cli_cmd_flag_none,
" = get information about an associated station (AP)" },
{ "all_sta", wpa_cli_cmd_all_sta, NULL,
cli_cmd_flag_none,
"= get information about all associated stations (AP)" },
{ "deauthenticate", wpa_cli_cmd_deauthenticate, NULL,
cli_cmd_flag_none,
" = deauthenticate a station" },
{ "disassociate", wpa_cli_cmd_disassociate, NULL,
cli_cmd_flag_none,
" = disassociate a station" },
#endif /* CONFIG_AP */
{ "suspend", wpa_cli_cmd_suspend, NULL, cli_cmd_flag_none,
"= notification of suspend/hibernate" },
{ "resume", wpa_cli_cmd_resume, NULL, cli_cmd_flag_none,
"= notification of resume/thaw" },
{ "drop_sa", wpa_cli_cmd_drop_sa, NULL, cli_cmd_flag_none,
"= drop SA without deauth/disassoc (test command)" },
{ "roam", wpa_cli_cmd_roam, wpa_cli_complete_bss,
cli_cmd_flag_none,
" = roam to the specified BSS" },
#ifdef CONFIG_P2P
{ "p2p_find", wpa_cli_cmd_p2p_find, wpa_cli_complete_p2p_find,
cli_cmd_flag_none,
"[timeout] [type=*] = find P2P Devices for up-to timeout seconds" },
{ "p2p_stop_find", wpa_cli_cmd_p2p_stop_find, NULL, cli_cmd_flag_none,
"= stop P2P Devices search" },
{ "p2p_connect", wpa_cli_cmd_p2p_connect, wpa_cli_complete_p2p_connect,
cli_cmd_flag_none,
" <\"pbc\"|PIN> [ht40] = connect to a P2P Device" },
{ "p2p_listen", wpa_cli_cmd_p2p_listen, NULL, cli_cmd_flag_none,
"[timeout] = listen for P2P Devices for up-to timeout seconds" },
{ "p2p_group_remove", wpa_cli_cmd_p2p_group_remove,
wpa_cli_complete_p2p_group_remove, cli_cmd_flag_none,
" = remove P2P group interface (terminate group if GO)" },
{ "p2p_group_add", wpa_cli_cmd_p2p_group_add, NULL, cli_cmd_flag_none,
"[ht40] = add a new P2P group (local end as GO)" },
{ "p2p_prov_disc", wpa_cli_cmd_p2p_prov_disc,
wpa_cli_complete_p2p_peer, cli_cmd_flag_none,
" = request provisioning discovery" },
{ "p2p_get_passphrase", wpa_cli_cmd_p2p_get_passphrase, NULL,
cli_cmd_flag_none,
"= get the passphrase for a group (GO only)" },
{ "p2p_serv_disc_req", wpa_cli_cmd_p2p_serv_disc_req,
wpa_cli_complete_p2p_peer, cli_cmd_flag_none,
" = schedule service discovery request" },
{ "p2p_serv_disc_cancel_req", wpa_cli_cmd_p2p_serv_disc_cancel_req,
NULL, cli_cmd_flag_none,
" = cancel pending service discovery request" },
{ "p2p_serv_disc_resp", wpa_cli_cmd_p2p_serv_disc_resp, NULL,
cli_cmd_flag_none,
"

你可能感兴趣的:(WIFI)

如何建设数据中台（五）——数据汇集—打破企业数据孤岛 weixin_47088026 学习记录和总结中台数据中台程序人生经验分享
数据汇集——打破企业数据孤岛要构建企业级数据中台，第一步就是将企业内部各个业务系统的数据实现互通互联，打破数据孤岛，主要通过数据汇聚和交换来实现。企业采集的数据可以是线上采集、线下数据采集、互联网数据采集、内部数据采集等。线上数据采集主要载体分为互联网和移动互联网两种，对应有系统平台、网页、H5、小程序、App等，可以采用前端或后端埋点方式采集数据。线下数据采集主要是通过硬件来采集，例如：WiFi
Adb无线连接调试 EHCB adb android
1.在开发者选项打开usb调试，以及无线调试2.手机连接wifi，进入设置静态ip地址，网关3.手机通过usb先连接电脑4.adbdevices命令检查设备连接情况5.adbtcpip55556.adb-s255d50d7tcpip5555（255d50d7为第4步获取的设备号）7.断开手机与PC的USB连接8.adbconnect192.168.200.220:5555（ip为第2步设置的ip地
夏季这么做，酒店空调能耗降一半酒店大白话
每年7、8月都是一年中用电量最大的时期，因为三伏天到了，热热热热热呀~你的空调、西瓜、冰激凌、WiFi都准备好了吗？掐指一算，这两个月电费会直线上升。不过，会做生意的酒店人，早就在源头上解决了耗电问题，将能耗降了一半！想知道怎么做吗？请看以下分享：经国家有关权威部门统计，城市电网高峰负荷约1/3用于空调制冷，使许多地区用电高度紧张，拉闸限电频繁。预计到2020年，全国制冷电力负荷高峰将达1.8亿k
gs3101光猫改桥接及路由器pppie拨号设置 xing2zhe3wujiang1 路由器网络
1)改桥接1连接光猫发出的WiFi，并访问192.168.1.1输入光猫背面提供的账号密码，保持登录。2打开新页面并访问192.168.1.1/cgi-bin/getGateWay.cgiFamilyGateWayYes/No#如果第二行显示No，再次刷新浏览器就可以了3在控制面板-程序和功能-启动或关闭Windows功能选中Telnet4输入telnet192.168.1.1tclogin：ad
《信号与线性系统分析》学习心得 GFeverything 个人学习感想信号与线性系统分析吴大正课本信号分析
《信号与线性系统分析》学习心得通过本学期上网课的学习，大致对信号有了一定的了解认知，下面对该课程的理解发表粗浅认知，说起信号，大家都不陌生，比如老师写的幻灯片，朋友的一个眼色，经常使用的WiFi信号......总之，信号就是信息的载体，它包含着信息！从数学的角度，信号可以说是一个时间函数/序列；从电路角度来说，信号就是各种激励与响应与系统的作用；从模电数电的角度来看，信号有连续时间信号与离散时间信
【Android 设备上的所有相关 WiFi 命令和使用方法】开心呆哥测试工程师 My个人工具栏技术 android
请注意，这些命令的可用性可能会因设备型号和Android版本的不同而有所变化。1.adbshellcmdwifi命令1.1查看WiFi状态命令:adbshellcmdwifistatus功能:查看WiFi的当前状态，如是否开启、连接的网络等。示例:adbshellcmdwifistatus1.2执行WiFi扫描命令:adbshellcmdwifiscan功能:执行WiFi扫描以查找附近的网络。示例
随身wifi整体捣鼓总结|救砖|高通410|MSM8916|日志档 2024/5/22 梦境虽美，却不长笔记 c语言 vscode ide emacs git github
随身wifi整体捣鼓总结|救砖|高通410|MSM8916|日志档-----------------------------------------------------------------------------------2024/5/22起源:长时间闲置,最近闲来无事,想给其刷写klipper.由于,距离黄金捣鼓(ps:很多人捣鼓,俗称:火热阶段),时间过长,能找到的资料并不多!前后捣
日常随笔（43）艺味深藏
1这大热天的，我还以为这个人坐在我们门口泡脚呢，简直脑子有病吧，泡脚不应该在自己家里泡吗。难道他只是为了在这里蹭WIFI？不过我出来看了看，桶里好像并没有水，他这是什么操作？“你？干嘛呀？”我忍不住指着桶问。“我把脚藏起来，蚊子就找不到了。太多蚊子了，老是咬我的脚。”咳，咳，花露水不管用吗？驱蚊水不好使吗？脚藏在桶里蚊子找不到了，可是你的胳膊不还露在外面吗？2一个男人，带着三个孩子来买雪糕。大的男
物联网之ESP32配网方式、蓝牙、WiFi 智码帮MJ682517 Web前端嵌入式硬件物联网嵌入式硬件物联网 web前端
MENU前言SmartConfig(智能配网)AP模式(AccessPoint模式)蓝牙配网WebServer模式WPS配网(Wi-FiProtectedSetup)Provisioning(配网服务)静态配置(硬编码)总结前言ESP32配网(Wi-Fi配置)的方式有多种，每种方式都有各自的优缺点。根据具体项目需求，可以选择适合的配网方式。SmartConfig(智能配网)原理ESP32通过监听周
《Android内核剖析》笔记第5章进程间通信核心框架Binder 2401_84408814 程序员 android 笔记 binder
服务端：即服务提供者，比如android就提供了很多的系统服务，比如Alarm、WIFI、INPUT、LAYOUT_INFLATER、ACTIVITY等；当然开发者也可以实现自己的服务，然后把服务开放给其他应用使用，在代码上服务接口必须继承IInterface，服务具体实现类必须继承Binder；Binder驱动：实际上他是一个遵从Linux设备驱动模型的虚拟驱动，设备节点为/dev/binder
【ESP32 WiFi篇（四）】ESP32 UDP服务端、客户端 Eiker_3169 ESP32 ESP32 http
文章目录UDP客户端UDP服务端UDP客户端/*BSDSocketAPIExampleThisexamplecodeisinthePublicDomain(orCC0licensed,atyouroption.)Unlessrequiredbyapplicablelaworagreedtoinwriting,thissoftwareisdistributedonan"ASIS"BASIS,WITH
YOHO！小插曲哈迪斯先生
Readme：这是体验的有货小插曲部分，时间估计在五月中旬，6.6.1还未出现的情况下，留个纪念，（这个不是产品体验报告）手机系统：Ios有货版本：6.6.0体验有货发生了两件事情。第一件事情：一天晚上我连着WIFI在信号频段非常不好的情况下，进入了APP，显示的东西与我之前所查阅产品体验报告的不同，只有男生和女生。但是我因为信号问题进不去，所以不了了之。在我没有正式进入，且用户提示网络异常的情况
鸿蒙开发（NEXT/API 12）【连接迁移通知】网络加速服务移动开发技术栈鸿蒙开发 harmonyos 华为网络鸿蒙系统鸿蒙 openharmony 移动开发
场景介绍在弱网环境下，系统发起多网迁移（WiFi蜂窝，主卡副卡等）的过程中，给应用提供连接迁移开始和完成通知，应用根据连接迁移通知的建议进行重建，快速恢复业务，给用户带来平滑、高速、低时延的上网体验。接口说明接口名描述on(type:‘handoverChange’,callback:Callback):void订阅连接迁移。off(type:‘handoverChange’,callback?:
疫情的半个月我想了很多事情，执行的只有两件小宏同学分享
这场疫情已经过去了快半个月了，有很多的小伙伴一直待在家里闷得发慌，我也是一样的，从聊天聊得火热到无话可聊的地步，朋友都聊了一遍就是没有办法解闷。之前网上很多小视频中讲到：如果给你WiFi和手机，你能待多久不出门？我好不犹豫的说能多久就可以多久，但是这个疫情的到来，让我充分的打脸，原来我只能待5天，5天过后一天都是难熬的日子。5天之后我看小视频看到很多励志的还有很多的创业从最底层到现在的老板之类的，
WiFi性能测试是评估无线网络性能的重要环节，它涵盖了多个方面的指标，如信号强度、网络速度、延迟时间等。 weixin_45544617 网络
WiFi性能测试是评估无线网络性能的重要环节，它涵盖了多个方面的指标，如信号强度、网络速度、延迟时间等。以下是对WiFi性能测试的详细解析：一、测试目的WiFi性能测试的主要目的是确保无线网络能够满足用户的实际需求，提供稳定、高速的网络连接。通过测试，可以及时发现并解决网络中的问题，优化网络配置，提升用户体验。二、测试工具1.智能手机应用：大多数智能手机都内置了WiFi分析工具，用户可以通过这些工
通感算一体化：（一）初步阐明定义和挑战炸膛坦客无线感知信息与通信自动驾驶智慧城市
常用的无线感知波无线电波频率高于300MHz的电磁波为微波波段，频率不同、波长不同、传输距离也各不相同。这类微波波长短，绕射能力差，往往用作视距（LoS）或者超视距中继通信。下面将分别介绍微波波段的几种代表性技术：WiFi、mmWave、UWB、Bluetooth、RFID、（NFC、ZigBee、LoRa、NB-IoT）这几种常见技术。前五种见于无线感知领域，后四种包括现在的5G、LTE等多用于
鸿蒙开发（NEXT/API 12）【网络连接管理】网络篇移动开发技术栈鸿蒙开发 harmonyos 网络 openharmony 鸿蒙系统鸿蒙网络连接管理移动开发
简介网络连接管理提供管理网络一些基础能力，包括WiFi/蜂窝/Ethernet等多网络连接优先级管理、网络质量评估、订阅默认/指定网络连接状态变化、查询网络连接信息、DNS解析等功能。说明为了保证应用的运行效率，大部分API调用都是异步的，对于异步调用的API均提供了callback和Promise两种方式，以下示例均采用promise函数。基本概念网络生产者：数据网络的提供方，比如WiFi、蜂窝
解决Pixel的WIFI网络连接受限问题 EQ-雪梨蛋花汤 ROM定制 adb
title:解决Pixel的WIFI网络连接受限问题date:2023-11-28description:解决Pixel的WIFI网络连接受限问题解决Pixel的WIFI网络连接受限问题原因自Android5.0起，谷歌引入了「CaptivePortal」的机制，用于检测WiFi网络认证是否正常。该机制默认检测访问的是谷歌服务器，需要科学才能正常访问谷歌服务器，如若没有WiFi就会出现网络受限的情
随身wifi哪个牌子网速好？盘点网速好的便携随身wifi品牌好项目高省
面对市面上各种各样的随身WIFI，很多人无从下手，各种随身WIFI品牌更是琳琅满目。因为工作性质，经常出差，有时候视频会议，晚上比较喜欢看个电影。每个月的流量费用不是几十g能解决的,所以我入手了几款随身WIFI。因为一开始没有任何挑选的经验，所以选了几个劣质的WIFI设备，网速慢的让人不知所措。算了算，这些年来，我买过5个不同类型的随身WiFi，用过20多个带卡和不带卡的随身WIFI，对随身WIF
用正则表达式过滤logcat中的多个tag的日志 fc82bb084ee7
在AndroidStudio中,在过滤器的byLogTag选项中配置.我配置了2个tagfilter方便开发,1.multi-tag-filter2.ignore-multi-tag-filter.过滤出指定tag的日志信息^(?:Watchdog|InputReader|ahking)Watchdog忽略指定tag的日志信息^(?!WifiMonitor|WifiHW)有些tag的无用log非常
用过以后感觉还好黄豆娃
朋友推荐的金色世纪，用过以后感觉还好，登机提醒及快速通道：服务人员登机提醒并引领客人到快速通道，客人走快速通道去安检内登机,进厅验证成功进入贵宾厅休息、茶水、饮料、小食品、书刊、WIFI上网、充电等
VMOS PRO 安卓手机一直卡死、闪退、死机、虚拟机操作界面没反应等问题 return_rebound linux 其他
我在启动VMOSpro多次后，每次运行一下就卡死、虚拟机操作界面没有反应后，一直在网上搜索方法解决问题，发现只用下载VMOS助手就可以解决下面讲解详细步骤：1.下载vmos助手，安装2.进入软件，点击激活3.按步骤：a、手机连接wifi；b、打开开发者选项（在手机版本信息里，频繁点击版本号打开开发者选项）；c、打开开发者选项中的”允许在‘设置’上重叠显示“和”无线调试开关“，一定要打开；d、点击无
穿墙网速跑满，全屋覆盖无死角！领势MX4200三频WiFi6路由器实测笔点酷玩
1，前言和大家说一个冷知识，1984年思科发明了全球首款路由器，2002年摩托罗拉发布了全球第一台商用无线路由器，然而中国最资深的网友也就26岁网龄（中国互联网元年是1994年），许多网友和WiFi打交道的时间也就十余年——中国家庭开始普及无线路由器的时间已经是2008年，大部分人是因为新买的手机有了WiFi联网功能，才知道什么是无线路由器。但在这十几年中，WiFi技术日新月异，从1999年IEE
315大曝光 WiFi探针盒子为什么比你更了解你自己 | 关于面对黑灰产的一点思考 1大宝哥
一年一度的315晚会，互联网人群都很期待/紧张，圈里又会出啥爆点㖏？315加班到家后，脑仁儿疼的大宝哥直接休息了，一觉醒来，看到普天盖地的WiFi探针消息…….作为资深安全人士(老人家)，看到标题后，第一赶脚赶脚，卧槽，这不就是伪基站的低端变种么？这事情都搞成大规模的产业链了，弄啥咧……..一般大家认为，即使看到了我的MAC(无线网卡)地址，也没有啥影响，又控制不我手机，不丢钱、不丢物、不丢人……
Python 调用手机摄像头宇宙第一小趴菜 #python黑科技 python 手机摄像头 Opencv
Python调用手机摄像头在手机上安装软件这里以安卓手机作为演示，ISO也是差不多的软件下载地址注意：要想在电脑上查看手机摄像头拍摄的内容的在一个局域网里面(没有WIFI可以使用热点)安装完打开IP摄像头服务器点击分享查看IP查看局域网的IP用Python的Opencv写一个代码来连接手机摄像头安装opencv-pythonpipinstallopencv-python注意可能安装库太慢可以这样(
【车载测试面试：各大车企面试题汇总】 @逝水流年轻染尘@ 面试职场和发展
HIL（硬件在环）测试、UDS功能诊断、UDS自动化诊断、数据库制作、DTC故障制造、CANoe工具使用、ECU刷写、报文解析、导航测试、车控测试、OTA升级测试、TBOX测试等TBOX深圳涉及过T-BOX测试吗Ota升级涉及的台架环境是什么样的？上车实测之前有没有一个仿真环境台架环境都什么零部件T-BOX了解多少Linux和shell有接触吗单片机车机有没有热点啊WiFi这个功能有没有涉及一些法
纪念2019年的夏天→歌诗达大西洋号邮轮-日本（上篇） Miss元明
“第一次坐邮轮的全程体验”上篇~（邮轮旅程前两天）那天下小雨2019.08.31本是独行，但由于缘分，提前认识了一个也是独行的小姐姐，所以互加了微信并且一起做了一些攻略~登船前要拿到船票才能上船上到邮轮的最顶层看海大西洋号邮轮小科普~总吨数为8.6万吨，载客量2680人1105间客房一张船票在手，船上吃喝住全免费~船上需要购买WIFI全程20美金，建议大家带美金信用卡，如visa，万事达.不过如果
无限流量随身wifi是真的吗(免费无限流量随身wifi是真的吗) 全网优惠分享
无限流量随身wifi是真的吗(免费无限流量随身wifi是真的吗)关注微•信•公•众•号"卡泡泡"就知道啦！这种随身WiFi真的可以不用交钱就可以连接WIFI吗?免费随身WiFi是有可能存在的，但需要注意一些问题。首先，需要确定WiFi是否来自一个可信的来源，例如公共场所的WiFi或提供免费WiFi的酒店或咖啡馆等。使用随身WiFi时，一般不需要每月交钱。但是，随身WiFi有很多种形式，收费标准也不
如何解决Mac网络已连接但无法上网的问题？MAC网络修复 AIshape 效率工具 macos 网络
Mac使用之后，容易出现代理问题，qq和微信都正常，但浏览器打不开更新了升级系统之后；出现WiFi、宽带、个人热点等已连接，但无法联网的情况通用解法适用于macOS13.xx/14.x.x，MAC网络修复的终极大法在访达中按cmd+shift+G或直接点击「前往文件夹」输入/Library/Preferences/SystemConfiguration/进入后把除Boot外的文件都删除，关机重启电
连同一wifi算同一ip地址吗？深入解析与探讨 hgdlip ip tcp/ip 网络网络协议 wifi ip地址
在数字化时代，网络已经成为我们生活中不可或缺的一部分。无论是工作、学习还是娱乐，我们都需要通过网络来连接。而在使用网络的过程中，IP地址作为网络设备的唯一标识，扮演着至关重要的角色。那么，当我们连接到同一个WiFi网络时，是否意味着我们共享同一个IP地址呢？本文将对此问题进行深入解析与探讨，帮助读者更好地理解IP地址在网络中的作用。一、IP地址的基本概念与功能IP地址，即互联网协议地址，是用于标识
java短路运算符和逻辑运算符的区别 3213213333332132 java基础
/* * 逻辑运算符——不论是什么条件都要执行左右两边代码 * 短路运算符——我认为在底层就是利用物理电路的“并联”和“串联”实现的 * 原理很简单，并联电路代表短路或（||），串联电路代表短路与（&&）。 * * 并联电路两个开关只要有一个开关闭合，电路就会通。 * 类似于短路或（||），只要有其中一个为true（开关闭合）是
Java异常那些不得不说的事白糖_ java exception
一、在finally块中做数据回收操作比如数据库连接都是很宝贵的，所以最好在finally中关闭连接。 JDBCAgent jdbc = new JDBCAgent(); try{ jdbc.excute("select * from ctp_log"); }catch(SQLException e){ ... }finally{ jdbc.close();
utf-8与utf-8(无BOM)的区别 dcj3sjt126com PHP
BOM——Byte Order Mark，就是字节序标记在UCS 编码中有一个叫做"ZERO WIDTH NO-BREAK SPACE"的字符，它的编码是FEFF。而FFFE在UCS中是不存在的字符，所以不应该出现在实际传输中。UCS规范建议我们在传输字节流前，先传输字符"ZERO WIDTH NO-BREAK SPACE"。这样如
JAVA Annotation之定义篇周凡杨 java 注解 annotation 入门注释
Annotation: 译为注释或注解 An annotation, in the Java computer programming language, is a form of syntactic metadata that can be added to Java source code. Classes, methods, variables, pa
tomcat的多域名、虚拟主机配置 g21121 tomcat
众所周知apache可以配置多域名和虚拟主机，而且配置起来比较简单，但是项目用到的是tomcat，配来配去总是不成功。查了些资料才总算可以，下面就跟大家分享下经验。很多朋友搜索的内容基本是告诉我们这么配置：在Engine标签下增面积Host标签，如下： <Host name="www.site1.com" appBase="webapps"
Linux SSH 错误解析（Capistrano 的cap 访问错误 Permission ） 510888780 linux capistrano
1.ssh -v [email protected] 出现 Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password). 错误运行状况如下： OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013 debug1: Reading configuratio
log4j的用法 Harry642 java log4j
一、前言： log4j 是一个开放源码项目，是广泛使用的以Java编写的日志记录包。由于log4j出色的表现，当时在log4j完成时，log4j开发组织曾建议sun在jdk1.4中用log4j取代jdk1.4 的日志工具类，但当时jdk1.4已接近完成，所以sun拒绝使用log4j，当在java开发中
mysql、sqlserver、oracle分页，java分页统一接口实现 aijuans oracle jave
定义：pageStart 起始页，pageEnd 终止页,pageSize页面容量 oracle分页：　　　　select * from ( select mytable.*,rownum num from (实际传的SQL) where rownum<=pageEnd) where num>=pageStart sqlServer分页：
Hessian 简单例子 antlove java Web service hessian
hello.hessian.MyCar.java package hessian.pojo; import java.io.Serializable; public class MyCar implements Serializable { private static final long serialVersionUID = 473690540190845543
数据库对象的同义词和序列百合不是茶 sql 序列同义词 ORACLE权限
回顾简单的数据库权限等命令; 解锁用户和锁定用户 alter user scott account lock/unlock; //system下查看系统中的用户 select * dba_users; //创建用户名和密码 create user wj identified by wj; identified by //授予连接权和建表权 grant connect to
使用Powermock和mockito测试静态方法 bijian1013 持续集成单元测试 mockito Powermock
实例： package com.bijian.study; import static org.junit.Assert.assertEquals; import java.io.IOException; import org.junit.Before; import org.junit.Test; import or
精通Oracle10编程SQL(6)访问ORACLE bijian1013 oracle 数据库 plsql
/* *访问ORACLE */ --检索单行数据 --使用标量变量接收数据 DECLARE v_ename emp.ename%TYPE; v_sal emp.sal%TYPE; BEGIN select ename,sal into v_ename,v_sal from emp where empno=&no; dbms_output.pu
【Nginx四】Nginx作为HTTP负载均衡服务器 bit1129 nginx
Nginx的另一个常用的功能是作为负载均衡服务器。一个典型的web应用系统，通过负载均衡服务器，可以使得应用有多台后端服务器来响应客户端的请求。一个应用配置多台后端服务器，可以带来很多好处：负载均衡的好处增加可用资源增加吞吐量加快响应速度，降低延时出错的重试验机制 Nginx主要支持三种均衡算法： round-robin l
jquery-validation备忘白糖_ jquery css F#Firebug
留点学习jquery validation总结的代码： function checkForm(){ validator = $("#commentForm").validate({// #formId为需要进行验证的表单ID errorElement :"span",// 使用"div"标签标记错误，默认:&
solr限制admin界面访问（端口限制和http授权限制） ronin47 限定Ip访问
solr的管理界面可以帮助我们做很多事情，但是把solr程序放到公网之后就要限制对admin的访问了。可以通过tomcat的http基本授权来做限制，也可以通过iptables防火墙来限制。我们先看如何通过tomcat配置http授权限制。第一步：在tomcat的conf/tomcat-users.xml文件中添加管理用户，比如： <userusername="ad
多线程-用JAVA写一个多线程程序，写四个线程，其中二个对一个变量加1，另外二个对一个变量减1 bylijinnan java 多线程
public class IncDecThread { private int j=10; /* * 题目:用JAVA写一个多线程程序，写四个线程，其中二个对一个变量加1，另外二个对一个变量减1 * 两个问题： * 1、线程同步--synchronized * 2、线程之间如何共享同一个j变量--内部类 */ public static
买房历程 cfyme
2015-06-21: 万科未来城，看房子 2015-06-26: 办理贷款手续，贷款73万，贷款利率5.65=5.3675 2015-06-27: 房子首付,签完合同 2015-06-28，央行宣布降息 0.25，就2天的时间差啊，没赶上。首付，老婆找他的小姐妹接了5万，另外几个朋友借了1-
[军事与科技]制造大型太空战舰的前奏 comsci 制造
天气热了........空调和电扇要准备好.......... 最近,世界形势日趋复杂化,战争的阴影开始覆盖全世界.......... 所以,我们不得不关
dateformat dai_lm DateFormat
"Symbol Meaning Presentation Ex." "------ ------- ------------ ----" "G era designator (Text) AD" "y year
Hadoop如何实现关联计算 datamachine mapreduce hadoop 关联计算
选择Hadoop，低成本和高扩展性是主要原因，但但它的开发效率实在无法让人满意。以关联计算为例。假设：HDFS上有2个文件，分别是客户信息和订单信息，customerID是它们之间的关联字段。如何进行关联计算，以便将客户名称添加到订单列表中？ &nbs
用户模型中修改用户信息时，密码是如何处理的 dcj3sjt126com yii
当我添加或修改用户记录的时候对于处理确认密码我遇到了一些麻烦，所有我想分享一下我是怎么处理的。场景是使用的基本的那些(系统自带)，你需要有一个数据表(user)并且表中有一个密码字段(password),它使用 sha1、md5或其他加密方式加密用户密码。面是它的工作流程: 当创建用户的时候密码需要加密并且保存，但当修改用户记录时如果使用同样的场景我们最终就会把用户加密过的密码再次加密，这
中文 iOS/Mac 开发博客列表 dcj3sjt126com Blog
本博客列表会不断更新维护，如果有推荐的博客，请到此处提交博客信息。本博客列表涉及的文章内容支持定制化Google搜索，特别感谢 JeOam 提供并帮助更新。本博客列表也提供同步更新的OPML文件（下载OPML文件），可供导入到例如feedly等第三方定阅工具中，特别感谢 lcepy 提供自动转换脚本。这里有导入教程。
js去除空格，去除左右两端的空格蕃薯耀去除左右两端的空格 js去掉所有空格 js去除空格
js去除空格，去除左右两端的空格 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>&g
SpringMVC4零配置--web.xml hanqunfeng springmvc4
servlet3.0+规范后，允许servlet，filter，listener不必声明在web.xml中，而是以硬编码的方式存在，实现容器的零配置。 ServletContainerInitializer：启动容器时负责加载相关配置 package javax.servlet; import java.util.Set; public interface ServletContainer
《开源框架那些事儿21》：巧借力与借巧力 j2eetop 框架 UI
同样做前端UI，为什么有人花了一点力气，就可以做好？而有的人费尽全力，仍然错误百出？我们可以先看看几个故事。故事1：巧借力，乌鸦也可以吃核桃有一个盛产核桃的村子，每年秋末冬初，成群的乌鸦总会来到这里，到果园里捡拾那些被果农们遗落的核桃。核桃仁虽然美味，但是外壳那么坚硬，乌鸦怎么才能吃到呢？原来乌鸦先把核桃叼起，然后飞到高高的树枝上，再将核桃摔下去，核桃落到坚硬的地面上，被撞破了，于是，
JQuery EasyUI 验证扩展可怜的猫 jquery easyui 验证
最近项目中用到了前端框架-- EasyUI，在做校验的时候会涉及到很多需要自定义的内容，现把常用的验证方式总结出来，留待后用。以下内容只需要在公用js中添加即可。使用类似于如下： <input class="easyui-textbox" name="mobile" id="mobile&
架构师之httpurlconnection----------读取和发送(流读取效率通用类) nannan408
1.前言. 如题. 2.代码. /* * Copyright (c) 2015, S.F. Express Inc. All rights reserved. */ package com.test.test.test.send; import java.io.IOException; import java.io.InputStream
Jquery性能优化 r361251 JavaScript jquery
一、注意定义jQuery变量的时候添加var关键字这个不仅仅是jQuery，所有javascript开发过程中，都需要注意，请一定不要定义成如下： $loading = $('#loading'); //这个是全局定义，不知道哪里位置倒霉引用了相同的变量名，就会郁闷至死的二、请使用一个var来定义变量如果你使用多个变量的话，请如下方式定义： . 代码如下: var page
在eclipse项目中使用maven管理依赖 tjj006 eclipse maven
概览: 如何导入maven项目至eclipse中建立自有Maven Java类库服务器建立符合maven代码库标准的自定义类库 Maven在管理Java类库方面有巨大的优势，像白衣所说就是非常“环保”。我们平时用IDE开发都是把所需要的类库一股脑的全丢到项目目录下，然后全部添加到ide的构建路径中，如果用了SVN/CVS，这样会很容易就把
中国天气网省市级联页面 x125858805 级联
1、页面及级联js <%@ page language="java" import="java.util.*" pageEncoding="UTF-8"%> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> &l