cocos2d-x lua 3.16 的一些utf8方法

原文: https://github.com/airtonix/ouf_tags/edit/master/utf8.lua

--===========================--
--===========================--

-- $Id: utf8.lua 147 2007-01-04 00:57:00Z pasta $
--
-- Provides UTF-8 aware string functions implemented in pure lua:
-- * string.utf8len(s)
-- * string.utf8sub(s, i, j)
-- * string.utf8reverse(s)
--
-- If utf8data.lua (containing the lower<->upper case mappings) is loaded, these
-- additional functions are available:
-- * string.utf8upper(s)
-- * string.utf8lower(s)
--
-- All functions behave as their non UTF-8 aware counterparts with the exception
-- that UTF-8 characters are used instead of bytes for all units.

--[[
Copyright (c) 2006-2007, Kyle Smith
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

    * Redistributions of source code must retain the above copyright notice,
      this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in the
      documentation and/or other materials provided with the distribution.
    * Neither the name of the author nor the names of its contributors may be
      used to endorse or promote products derived from this software without
      specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
--]]

-- ABNF from RFC 3629
-- 
-- UTF8-octets = *( UTF8-char )
-- UTF8-char   = UTF8-1 / UTF8-2 / UTF8-3 / UTF8-4
-- UTF8-1      = %x00-7F
-- UTF8-2      = %xC2-DF UTF8-tail
-- UTF8-3      = %xE0 %xA0-BF UTF8-tail / %xE1-EC 2( UTF8-tail ) /
--               %xED %x80-9F UTF8-tail / %xEE-EF 2( UTF8-tail )
-- UTF8-4      = %xF0 %x90-BF 2( UTF8-tail ) / %xF1-F3 3( UTF8-tail ) /
--               %xF4 %x80-8F 2( UTF8-tail )
-- UTF8-tail   = %x80-BF
-- 

-- returns the number of bytes used by the UTF-8 character at byte i in s
-- also doubles as a UTF-8 character validator
local function utf8charbytes (s, i)
    -- argument defaults
    i = i or 1

    -- argument checking
    if type(s) ~= "string" then
        error("bad argument #1 to 'utf8charbytes' (string expected, got ".. type(s).. ")")
    end
    if type(i) ~= "number" then
        error("bad argument #2 to 'utf8charbytes' (number expected, got ".. type(i).. ")")
    end

    local c = s:byte(i)

    -- determine bytes needed for character, based on RFC 3629
    -- validate byte 1
    if c > 0 and c <= 127 then
        -- UTF8-1
        return 1

    elseif c >= 194 and c <= 223 then
        -- UTF8-2
        local c2 = s:byte(i + 1)

        if not c2 then
            error("UTF-8 string terminated early")
        end

        -- validate byte 2
        if c2 < 128 or c2 > 191 then
            error("Invalid UTF-8 character")
        end

        return 2

    elseif c >= 224 and c <= 239 then
        -- UTF8-3
        local c2 = s:byte(i + 1)
        local c3 = s:byte(i + 2)

        if not c2 or not c3 then
            error("UTF-8 string terminated early")
        end

        -- validate byte 2
        if c == 224 and (c2 < 160 or c2 > 191) then
            error("Invalid UTF-8 character")
        elseif c == 237 and (c2 < 128 or c2 > 159) then
            error("Invalid UTF-8 character")
        elseif c2 < 128 or c2 > 191 then
            error("Invalid UTF-8 character")
        end

        -- validate byte 3
        if c3 < 128 or c3 > 191 then
            error("Invalid UTF-8 character")
        end

        return 3

    elseif c >= 240 and c <= 244 then
        -- UTF8-4
        local c2 = s:byte(i + 1)
        local c3 = s:byte(i + 2)
        local c4 = s:byte(i + 3)

        if not c2 or not c3 or not c4 then
            error("UTF-8 string terminated early")
        end

        -- validate byte 2
        if c == 240 and (c2 < 144 or c2 > 191) then
            error("Invalid UTF-8 character")
        elseif c == 244 and (c2 < 128 or c2 > 143) then
            error("Invalid UTF-8 character")
        elseif c2 < 128 or c2 > 191 then
            error("Invalid UTF-8 character")
        end
        
        -- validate byte 3
        if c3 < 128 or c3 > 191 then
            error("Invalid UTF-8 character")
        end

        -- validate byte 4
        if c4 < 128 or c4 > 191 then
            error("Invalid UTF-8 character")
        end

        return 4

    else
        error("Invalid UTF-8 character")
    end
end


-- returns the number of characters in a UTF-8 string
local function utf8len (s)
    -- argument checking
    if type(s) ~= "string" then
        error("bad argument #1 to 'utf8len' (string expected, got ".. type(s).. ")")
    end

    local pos = 1
    local bytes = s:len()
    local len = 0

    while pos <= bytes and len ~= chars do
        local c = s:byte(pos)
        len = len + 1

        pos = pos + utf8charbytes(s, pos)
    end

    if chars ~= nil then
        return pos - 1
    end

    return len
end

-- install in the string library
if not string.utf8len then
    string.utf8len = utf8len
end


-- functions identically to string.sub except that i and j are UTF-8 characters
-- instead of bytes
local function utf8sub (s, i, j)
    -- argument defaults
    j = j or -1

    -- argument checking
    if type(s) ~= "string" then
        error("bad argument #1 to 'utf8sub' (string expected, got ".. type(s).. ")")
    end
    if type(i) ~= "number" then
        error("bad argument #2 to 'utf8sub' (number expected, got ".. type(i).. ")")
    end
    if type(j) ~= "number" then
        error("bad argument #3 to 'utf8sub' (number expected, got ".. type(j).. ")")
    end

    local pos = 1
    local bytes = s:len()
    local len = 0

    -- only set l if i or j is negative
    local l = (i >= 0 and j >= 0) or s:utf8len()
    local startChar = (i >= 0) and i or l + i + 1
    local endChar   = (j >= 0) and j or l + j + 1

    -- can't have start before end!
    if startChar > endChar then
        return ""
    end

    -- byte offsets to pass to string.sub
    local startByte, endByte = 1, bytes

    while pos <= bytes do
        len = len + 1

        if len == startChar then
            startByte = pos
        end

        pos = pos + utf8charbytes(s, pos)

        if len == endChar then
            endByte = pos - 1
            break
        end
    end

    return s:sub(startByte, endByte)
end

-- install in the string library
if not string.utf8sub then
    string.utf8sub = utf8sub
end


-- replace UTF-8 characters based on a mapping table
local function utf8replace (s, mapping)
    -- argument checking
    if type(s) ~= "string" then
        error("bad argument #1 to 'utf8replace' (string expected, got ".. type(s).. ")")
    end
    if type(mapping) ~= "table" then
        error("bad argument #2 to 'utf8replace' (table expected, got ".. type(mapping).. ")")
    end

    local pos = 1
    local bytes = s:len()
    local charbytes
    local newstr = ""

    while pos <= bytes do
        charbytes = utf8charbytes(s, pos)
        local c = s:sub(pos, pos + charbytes - 1)

        newstr = newstr .. (mapping[c] or c)

        pos = pos + charbytes
    end

    return newstr
end


-- identical to string.upper except it knows about unicode simple case conversions
local function utf8upper (s)
    return utf8replace(s, utf8_lc_uc)
end

-- install in the string library
if not string.utf8upper and utf8_lc_uc then
    string.utf8upper = utf8upper
end


-- identical to string.lower except it knows about unicode simple case conversions
local function utf8lower (s)
    return utf8replace(s, utf8_uc_lc)
end

-- install in the string library
if not string.utf8lower and utf8_uc_lc then
    string.utf8lower = utf8lower
end


-- identical to string.reverse except that it supports UTF-8
local function utf8reverse (s)
    -- argument checking
    if type(s) ~= "string" then
        error("bad argument #1 to 'utf8reverse' (string expected, got ".. type(s).. ")")
    end

    local bytes = s:len()
    local pos = bytes
    local charbytes
    local newstr = ""

    while pos > 0 do
        c = s:byte(pos)
        while c >= 128 and c <= 191 do
            pos = pos - 1
            c = s:byte(pos)
        end

        charbytes = utf8charbytes(s, pos)

        newstr = newstr .. s:sub(pos, pos + charbytes - 1)

        pos = pos - 1
    end

    return newstr
end

-- install in the string library
if not string.utf8reverse then
    string.utf8reverse = utf8reverse
end


你可能感兴趣的:(cocos2d-x lua 3.16 的一些utf8方法)