网站二级域名配置

  公司要求把我们的博客弄成二级域名即：blog.xxxx.com.

如果满足这个需求则要搞三处：公司使用服务器是jboss+apache

虚拟域名用的是ajp。

 

假设你的apche装在C:\Apache2.2里面，则需要修改的文件

有三处：

1.修改文件C:\Apache2.2\conf\httpd.conf

2.修改C:\Apache2.2\conf\extra\httpd-vhosts.conf

3.修改文件D:\jboss-4.2.0.GA\server\default\deploy\jboss-web.deployer\server.xml

4.在应用中放置jboss-web.xml文件。D:\jboss-4.2.0.GA\server\default\deploy\blog.war\WEB-INF\jboss-web.xml

 

<1>修改C:\Apache2.2\conf\httpd.conf文件

 

1）把装载的模块打开

LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so

完整配置文件如下：

 

2）把虚拟域名配置打开

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

写道

#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See for detailed information.
# In particular, see
#
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Apache2.2" will be interpreted by the
# server as "C:/Apache2.2/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "C:/Apache2.2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the
# directive.
#
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 192.168.0.49:80
Listen 127.0.0.1:80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadFile "c:/php-5.2.6/php5ts.dll"
LoadFile "c:/php-5.2.6/libmysql.dll"
PHPIniDir "c:/php-5.2.6"
LoadModule php5_module "c:/php-5.2.6/php5apache2_2.dll"

LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so



#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon




# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
#
ServerAdmin [email protected]

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/wwwroot"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# features.
#

Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all


#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#

#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks

#
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all



#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#

DirectoryIndex index.html index.php


#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#

Order allow,deny
Deny from all
Satisfy All


#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error.log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn


#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common


# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio


#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog "logs/access.log" common

#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog "logs/access.log" combined



#
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://localhost/bar

#
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
#
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a section to allow access to
# the filesystem path.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
#
ScriptAlias /cgi-bin/ "C:/Apache2.2/cgi-bin/"




#
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#
#Scriptsock logs/cgisock


#
# "C:/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#

AllowOverride None
Options None
Order allow,deny
Allow from all


#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
#
TypesConfig conf/mime.types

#
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#
#AddType application/x-gzip .tgz
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
#AddHandler cgi-script .cgi

# For type maps (negotiated resources):
#AddHandler type-map var

#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml


#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
#

#
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#

SSLRandomSeed startup builtin
SSLRandomSeed connect builtin

 

<2>修改C:\Apache2.2\conf\extra\httpd-vhosts.conf

添加

  ServerName blog.xxxx.com
  ProxyPass / ajp://localhost:8009/
  ProxyPassReverse / ajp://localhost:8009/

完整配置文件

写道

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
#
# for further details before you try to setup virtual hosts.
#
#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
#
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any block.
#
#
# ServerAdmin [email protected]
# DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com"
# ServerName dummy-host.example.com
# ServerAlias www.dummy-host.example.com
# ErrorLog "logs/dummy-host.example.com-error_log"
# CustomLog "logs/dummy-host.example.com-access_log" common
#

#
# ServerAdmin [email protected]
# DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com"
# ServerName dummy-host2.example.com
# ErrorLog "logs/dummy-host2.example.com-error_log"
# CustomLog "logs/dummy-host2.example.com-access_log" common
#

#
# ServerAdmin [email protected]
# ServerName *
# UseCanonicalName Off
# VirtualDocumentRoot /var/www/virtual/usersite/%-4+/
# Alias /css "/var/www/virtual/template/css"
# Alias /js "/var/www/virtual/template/js"
# Alias /images "/var/www/virtual/template/images"
#
# Options None
# AllowOverride None
# Order allow,deny
# Allow from all
#
#


ServerName www.hotct.com
ServerAlias hotct.com dt.hotct.com
DocumentRoot /var/www/www.hotct.com
Alias /bbs "/var/www/bbs.hotct.com"

AllowOverride FileInfo Options


Alias /css "/usr/local/jboss/server/default/deploy/hotct.war/css"


Options None
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1


Alias /images "/usr/local/jboss/server/default/deploy/hotct.war/images"


Options None
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1


Alias /js "/usr/local/jboss/server/default/deploy/hotct.war/js"


Options None
AllowOverride None
Order allow,deny
Allow from all
# Order deny,allow
# Deny from all
# Allow from 127.0.0.1


ProxyPass /css !
ProxyPass /images !
ProxyPass /js !

ProxyPass /bbs !
ProxyPass /common !
ProxyPass /help !

ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/

# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"

#CustomLog logs/www.hotct.com_log "combined"





ServerAdmin [email protected]
DocumentRoot /var/www/images.hotct.com
ServerName images.hotct.com
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"


#
# DocumentRoot /var/www/expert.hotct.com
# ServerName expert.hotct.com
#
# AllowOverride FileInfo Options
#

# Alias /blog "/var/www/blog.hotct.com"
#
# AllowOverride FileInfo Options
#

# ProxyPass /olqa ajp://localhost:8009/olqa
# ProxyPassReverse /olqa ajp://localhost:8009/olaq

# ProxyPass /FamilyDoctor ajp://localhost:8009/FamilyDoctor
# ProxyPassReverse /FamilyDoctor ajp://localhost:8009/FamilyDoctor

# ProxyPass /dr ajp://localhost:8009/dr
# ProxyPassReverse /dr ajp://localhost:8009/dr
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"

#


ServerName www.fst-cn.com
# Alias /css "/usr/local/jboss/server/default/deploy/about.war/css"
# Alias /images "/usr/local/jboss/server/default/deploy/about.war/images"
# Alias /js "/usr/local/jboss/server/default/deploy/about.war/js"
# ProxyPass /css !
# ProxyPass /images !
# ProxyPass /js !
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/



ServerName expert.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/



ServerName biz.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/



ServerName hd.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/



ServerName blog.hotct.com
ProxyPass / ajp://localhost:8009/
ProxyPassReverse / ajp://localhost:8009/




ServerAdmin [email protected]
ServerName cas.hotct.com

ProxyPass /cas ajp://localhost:8009/cas
ProxyPassReverse /cas ajp://localhost:8009/cas
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"





ServerAdmin [email protected]
ServerName search.hotct.com

ProxyPass /search ajp://localhost:8009/search
ProxyPassReverse /search ajp://localhost:8009/search
# CustomLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-access_log.%Y%m%d" "combined"
# ErrorLog "|/usr/local/sbin/cronolog /usr/local/apache2/logs/hotct.com-error_log.%Y%m%d"









####################################################################

#
#
# ServerName cacti.hotct.com
# DocumentRoot /usr/local/cacti
#
# Options None
# AllowOverride None
# order allow,deny
# Allow from all
#
#
#

#
# ServerName awstats.hotct.com
# DocumentRoot /usr/local/awstats/wwwroot
# Alias /awstatsclasses "/usr/local/awstats/wwwroot/classes/"
# Alias /awstatscss "/usr/local/awstats/wwwroot/css/"
# Alias /awstatsicons "/usr/local/awstats/wwwroot/icon/"
# ScriptAlias /awstats/ "/usr/local/awstats/wwwroot/cgi-bin/"
#
# AuthType Basic
# AuthName "Restricted Files"
# AuthUserFile /usr/local/apache2/passwords
# Require user awsuser
# Options None
# AllowOverride None
# Order allow,deny
# Allow from all
#

#

#added by genstone at 2009-3-11,blog test

ServerName dmgy.blog.hotct.com
ServerAdmin [email protected]
DocumentRoot /var/www/dmgy.blog.hotct.com


#
# ServerAdmin [email protected]
# ServerName awstats.hotct.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog "/home/ebnew/apachelog/access_log" combined
# DocumentRoot /var/www/awstats/wwwroot
# Alias /awstatsclasses "/var/www/awstats/wwwroot/classes/"
# Alias /awstatscss "/var/www/awstats/wwwroot/css/"
# Alias /awstatsicons "/var/www/awstats/wwwroot/icon/"
# ScriptAlias /awstats/ "/var/www/awstats/wwwroot/cgi-bin/"
#
# AuthType Basic
# AuthName "Restricted Files"
# AuthUserFile /usr/local/apache2/passwords
# Require user awsuser
# Options None
# AllowOverride None
# Order allow,deny
# Allow from all
#
#

 

<3>修改文件D:\jboss-4.2.0.GA\server\default\deploy\jboss-web.deployer\server.xml

添加

   
        blog.hotct.com
                                prefix="blog" suffix=".log" pattern="common"
                        directory="${jboss.server.home.dir}/log" resolveHosts="false" />
       
                                cookies="true" debug="1" reloadable="true" />
    

 

完整配置文件

写道

maxThreads="250" maxHttpHeaderSize="8192"
emptySessionPath="true" protocol="HTTP/1.1"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true"
URIEncoding="UTF-8"
/>




emptySessionPath="true" enableLookups="false" redirectPort="8443" />




certificatePrincipal="org.jboss.security.auth.certs.SubjectDNMapping"
allRolesMode="authOnly"
/>


autoDeploy="false" deployOnStartup="false" deployXML="false"
configClass="org.jboss.web.tomcat.security.config.JBossContextConfig"
>














cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager"
transactionManagerObjectName="jboss:service=TransactionManager" />






blog.hotct.com
prefix="blog" suffix=".log" pattern="common"
directory="${jboss.server.home.dir}/log" resolveHosts="false" />

cookies="true" debug="1" reloadable="true" />

 

<4>在应用中添加配置文件D:\jboss-4.2.0.GA\server\default\deploy\blog.war\WEB-INF\jboss-web.xml

写道

"http://www.jboss.org/j2ee/dtd/jboss-web_3_0.dtd">

/
blog.hotct.com