ubuntu下基于ns-3的ndnSIM的安装

http://ndnsim.net/1.0/getting-started.html
sudo apt-get update
sudo apt-get uprade
参考Yogy的Kali Linux下常用软件安装及配置
安装

wudanye@wubuntu:~$ sudo apt-get install build-esscential
wudanye@wubuntu:~$ sudo apt-get install aptitude

依赖(wudanye@wubuntu:~$sudo apt-get install libpython2.7-stdlib)

1. 安装依赖库

wudanye@wubuntu:~$ sudo aptitude install libboost-all-dev
sudo apt-get install python-dev python-pygraphviz python-kiwi python-pygoocanvas python-gnome2 python-rsvg ipython

2. 下载ndnSIM源代码
   安装

wudanye@wubuntu:~$ sudo apt-get install git

wudanye@wubuntu:~$ sudo apt-get install vim
wudanye@wubuntu:~/Workspace$ mkdir ndnSIM

下载ns-3：

wudanye@wubuntu:~/Workspace/ndnSIM$ git clone -b ndnSIM-v1 git://github.com/cawka/ns-3-dev-ndnSIM ns-3

下载ndnSIM

wudanye@wubuntu:~/Workspace/ndnSIM$ git config --global url."https://".insteadOf git://
wudanye@wubuntu:~/Workspace/ndnSIM$ git clone -b master-v1 git://github.com/named-data/ndnSIM.git ns-3/src/ndnSIM

如果不下载ns-3，直接复制的情况下，需要在ns-3下：

wudanye@wubuntu:~/Workspace/ndnSIM/ns-3$ sudo chmod -R 777 *

配置pybindgen：

wudanye@wubuntu:~/Workspace/ndnSIM$ git clone git://github.com/cawka/pybindgen.git pybindgen

??(wudanye@wubuntu:~/Workspace/ndnSIM$ git clone -b master-v1 git://github.com:named-data/ndnSIM.git ns-3/src/ndnSIM)

3. 编译运行

wudanye@wubuntu:~/Workspace/ndnSIM/ns-3$./waf configure --enable-tests --enable-examples
wudanye@wubuntu:~/Workspace/ndnSIM/ns-3$./waf --run=ndn-simple --vis
wudanye@wubuntu:~/Workspace/ndnSIM/ns-3$./waf --run=ndn-tree-cs-tracers

Eclipse

1.安装

wudanye@wubuntu:~$ sudo apt-get install eclipse eclipse-cdt eclipse-cdt-pkg-config

2.配置
新建ns-3项目

New -- C++ Project
Project name: ndnSIM
Location: /home/wudanye/Workspace/ndnSIM/ns-3

配置waf编译器

Project->properties->C/C++build
Builder Settings:
Build command: ${workspace_loc:/ndnSIM}/waf
Build directory: ${workspace_loc:/ndnSIM}/build
Behaviour:
Build(Incremental Build): all --> build

备选
Project->properties->C/C++build->Environment->Add
Name: LANG
Value: zh_CN.UTF-8:en_US
Name:LC_ALL
Value: en_US

Very Important：
配置调试器

Run->Debug Configurations->C/C++application->ndnSIM Debug
C/C++ Application:
/home/wudanye/workspace/ndnSIM/ns-3/src/ndnSIM/examples/ndn-tree-cs-tracers.cc
Project:
ndnSIM
Environment->New:
Variable: LD_LIBRARY_PATH
Value: ${workspace_loc:/ndnSIM}/build

写在最后。

sudo passwd root
su root
su
logout (?)

IPV4

10.21.5.60
255.255.0.0
10.21.0.254

DNS

159.226.39.1
159.226.8.6

登录 159.226.39.22
ubuntu系统安装 逻辑分区
ext4 /
交换分区 小5G
ext4 /home