- Download demo project for CriticalSection Win32 - 122 Kb
- Download demo project for CriticalSection MFC - 9.17 Kb
Introduction
In my previous article, we discussed simple multithreaded programming in C, Win32 and MFC. Now, we see simple thread synchronization with Win32 API and MFC.
What is Thread Synchronization?
In a multithreaded environment, each thread has its own local thread stack and registers. If multiple threads access the same resource for read and write, the value may not be the correct value. For example, let's say our application contains two threads, one thread for reading content from the file and another thread writing the content to the file. If the write thread tries to write and the read thread tries to read the same data, the data might become corrupted. In this situation, we want to lock the file access. The thread synchronization has two stages. Signaled and non-signaled.
The signaled state allows objects to access and modify data. The non-signaled state does allow accessing or modifying the data in the thread local stack.
Thread Synchronization methods:
Many of the thread synchronization methods are used to synchronize multiple threads. The following methods are used to synchronize between objects.
Thread Synchronization on different processes:
Event:
Event is a thread synchronization object used to set the signaled or non-signaled state. The signaled state may be manual or automatic depending on the event declaration.
Mutex:
Mutex is the thread synchronization object which allows to access the resource only one thread at a time. Only when a process goes to the signaled state are the other resources allowed to access.
Semaphore:
Semaphore is a thread synchronization object that allows zero to any number of threads access simultaneously.
Thread Synchronization in same process:
Critical Section
The critical section is a thread synchronization object. The other synchronization objects like semaphore, event, and mutex are used to synchronize the resource with different processes. But, the critical section allows synchronization within the same process.
The given difference is the main difference between the thread synchronization objects. The other differences between the thread synchronization are the following:
Win32 Wait Functions:
The Wait family of functions are used to wait the thread synchronization object while a process completes. The widely used functions areWaitForSingleObject and WaitForMultipleObjects functions. TheWaitForSingleObject function is used for waiting on a single Thread synchronization object. This is signaled when the object is set to signal or the time out interval is finished. If the time interval is INFINITE, it waits infinitely.
The WaitForMultipleObjects is used to wait for multiple objects signaled. In the Semaphore thread synchronization object, when the counters go to zero the object is non-signaled. The Auto reset event and Mutex is non-signaled when it releases the object. The manual reset event does affect the wait functions' state.
MFC Lock/Unlock Resource:
The MFC CMutex, CCriticalSection, CSemaphore, andCEvent classes are used to synchronize the threads in Microsoft Foundation Class library.
The CSingleLock and CMultiLock are used to control the access to the resources in multithread programming. TheCSingleLock and CMultiLock classes have no base class. CSingleLock is used to lock the single synchronization object at a time. CMultiLock is used to control more than one thread synchronization objects with a particular time interval. TheCSingleLock/CMultiLock Lock and Unlock member functions are used to the lock or release the resource.
The CSingleLock and CMultiLock constructors use the CSyncObject object for locking and unlocking the resource. All the Thread Synchronization classes are derived fromCSyncObject base class. So, the constructor has any one of the thread synchronization classes derived fromCSyncObject. CSingleLock IsLocked member is use to find if the object is locked already or not.
The CMultiLock class is used to control the access to the resources in multiple objects. TheCMultiLock constructor has an array of CSyncObject objects and the total number of counts in the thread synchronization classes. TheIsLocked member function is used to check the particular synchronization object state.
Thread Synchronization Objects:
Critical Section:
The Critical section object is same as the Mutex object. But, the Mutex object allows synchronizing objects across the process. But the Critical section object does not allow synchronization with different processes. The critical section is used to synchronize the threads within the process boundary.
It is possible to use Mutex instead of critical section. But, the critical section thread synchronization object is slightly faster compared to other synchronization objects. The critical section object synchronizes threads within the process. Critical section allows accessing only one thread at a time.
Win32 Critical Section Object:
The process allocates memory for the critical section using the CRITICAL_SECTION structure. The critical section structure declared in theWinnt.h is as follows:
typedef struct _RTL_CRITICAL_SECTION { PRTL_CRITICAL_SECTION_DEBUG DebugInfo; // The following three fields control entering // and exiting the critical section for the resource LONG LockCount; LONG RecursionCount; HANDLE OwningThread; // from the thread's ClientId->UniqueThread HANDLE LockSemaphore; DWORD SpinCount; } RTL_CRITICAL_SECTION, *PRTL_CRITICAL_SECTION;
In critical section, we allocate memory for CRITICAL_SECTION structure and initializes the critical section. TheIniailizeCriticalSection and InitializeCriticalSectionAndSpinCount are used to initialize the critical section. If we initialize the critical section, then only, we use any one of theEnterCriticalsection, TryEnterCriticalSection, or LeaveCriticalSection functions. The EnterCriticalsection function is used to enter the critical section, andTryEnterCriticalSection to enter the critical section without blocking.LeaveCricalSection is used to leave the critical section.
If any of the other synchronization object names is same as Critical section object, the Critical section object waits for the ownership infinitely. The Critical section object does not allow moving or copying the object. If we have to synchronize the thread on different processes, use Mutex object. DeleteCriticalSection function releases all the critical section objects. After calling theDeleteCriticalSection, it is not possible to call EnterCriticalsection orLeaveCriticalSection.
Example:
CRITICAL_SECTION m_cs; //Initilize the critical section InitializeCriticalSection(&m_cs);
The two threads try to access the same variable. The global variable g_n tries to access two threads. The globalm_cs CRITICAL_SECTION structure is used to synchronize the two threads.
UINT ThreadOne(LPVOID lParam)
{
//
// Lock the Critical section
EnterCriticalSection(&m_cs);
// Some Process
//Release the Critical section
LeaveCriticalSection(&m_cs);
return 0;
}
Thread two:
UINT ThreadTwo(LPVOID lParam)
{
// Lock the Critical section
EnterCriticalSection(&m_cs);
// Some Process
//Release the Critical section
LeaveCriticalSection(&m_cs);
// return the thread
return 0;
}
MFC Critical Section object:
The CCriticalSection class provides the functionality of critical section synchronization object. The default constructor is used to construct the critical section object. TheLock and Unlock functions are used to control the resource access in the synchronization object.
The CRITICAL_SECTION's m_sect data member allows initializing theCRITICAL_SECTION structure. The Lock function overloaded in two forms. TheLock function without any arguments is used to lock the resource. The other form ofLock function needs the number of milliseconds to wait. All the critical section members are declared inafxmt.inl file as inline functions.
Example:
Copy Code
// Global Critical section CCriticalSection c_s; int g_C; //////////////////Thread One /////////////////////// UINT ThreadFunction1(LPVOID lParam) { // Create object for Single Lock CSingleLock lock(&c_s); // Lock lock.Lock(); // Process // Unlock lock.Unlock(); // return return 0; } ////////////Thraed 2//////////////////// UINT ThreadFunction2(LPVOID lParam) { // Single Lock Constract Critical Section CSingleLock lock(&c_s); // Lock lock.Lock(); // Process // Unlock lock.Unlock(); //return return 0; }
Event:
Event is the thread synchronization object to set signaled state or non-signaled state. The Event has two types. They are manual reset event and auto reset event.
The manual event has signaled user set to non-signaled state, uses ResetEvent function manually. The auto reset event automatically occurs when the object is raised to the non-signaled state. The event thread synchronization object is used to synchronize the particular event entered in the thread. The Event object is used to set the operating system kernel flag in the thread.
Win32 Event Object:
The CreateEvent function is used to create the event thread synchronization object. The manual or auto reset event choice is mentioned at theCreateEvent function parameter initialization. The Wait family functions (WaitForSingleObject,WaitForMultipleObjects) are use to wait when a particular event occurs. The group of objects waits for the events: the single object signaled or the entire events are signaled in the thread.
CreateEvent function is used to create manual or auto reset events. This function is used to create named and unnamed event objects.SetEvent function is used to set the event object to signal state. TheResetEvent function is used to set the event object to non-signaled state. If the function is successful, it returns the handle of that event. If the named event is already available, theGetLastError function returns the ERROR_ALREADY_EXISTS flag. If the named event is already available, theOpenEvent function is used to access the event previously created by theCreateEvent function.
Example:
// Handle for Event HANDLE g_Event; // Create a manual-reset event object with no security attributes g_Event = CreateEvent( NULL, TRUE, TRUE, "Event" ); ResetEvent(g_Event); // Do Process SetEvent(g_Event);
MFC Event Object:
Event is useful for waiting if something happens (or an event occurs). CEvent class is used for event object functionality. TheCEvent class is derived from the abstract CSyncObject Class. TheCSyncObject is derived from the CObject mother class. TheCSingleLock or CMultiLock constructor use one of the CSyncObject derived classes. The CEvent constructor specifies the manual or auto reset event options.
MFC CEvent class provides the constructor with default arguments. If we want to control our needs, we set the Ownership for the event object, manual or auto reset event flag, the name of the event object (if named event), and the security attributes. If the name matches with that of an existing event object, check the type of the object. If that object is an event, theCEvent constructor simply replies the handle of the previous event. If the name exists for any of the other synchronization object, theCEvent constructor gives an error message.
The Manual event object signaled/non-signaled uses SetEvent or ResetEvent function .The Auto Reset event occurs when it releases any one of threads in the event object. We don't useCSyncObject directly. Because, the CSyncObject is an abstract base class. All the event members are declared in theafxmt.inl file as inline functions.
Mutex Synchronization Object:
Mutex is the synchronization object used to synchronize the threads with more than one process. The Mutex is as the name tells, mutually exclusive. The Mutex object allows accessing the resource single thread at a time.
Win32 Mutex Object:
The CreateMutex function is used to create the Mutex object. In theCreateMutex function, we initialize the named Mutex or unnamed Mutex, and set the ownership to true or false arguments.
If we create two-named Mutex using CreateMutex function within the same process, the secondCreateMutex function returns error. If we create two or more Mutex objects on different processes, with the same name, when we call first time, theCreateMutex function creates the Mutex. The other CreateMutex function returns the handle of the previous Mutex object.
The OpenMutex function is used to open an existing Mutex using the supplied Mutex name. TheReleaseMutex is used to release a Mutex object. The threads wait in first in first out order for taking the ownership for the waiting threads. If we try to take the ownership twice, deadlock occurs. We the callReleaseMutex, and then try to take the ownership.
Example
HANDLE g_Mutex; DWORD dwWaitResult; // Create a mutex with initial owner. g_Mutex = CreateMutex( NULL, TRUE, "MutexToProtectDatabase"); // Wait for ownership dwWaitResult = WaitForSingleObject( g_Mutex, 5000L); // Check takes ownership // Release Mutex ReleaseMutex(g_Mutex))
MFC Mutex Object:
The MFC CMutex class is used to control the Mutex objects. The CMutex constructor has three parameters. We can specify the name of the Mutex as a parameter. If this isnull, an unnamed Mutex is created. The Security attributes are used to set the security attributes for the Mutex object. If the name already exists for a Mutex object, the constructor simply returns the existing Mutex object. If the name exists for some object, the constructor fails.
To control resource access for single Mutex object, use CSingleLock class. If you wish to control multiple Mutex objects, theCMultiLock is used to control the access to resources in multithreaded programming.
Copy Code
// Global Mutex Object CMutex g_m; int g_C; UINT ThreadFunction1(LPVOID lParam) { // Create object for Single Lock CSingleLock lock(&g_m); lock.Lock(); // Process lock.Unlock(); // return return 0; } UINT ThreadFunction2(LPVOID lParam) { // Single Lock Construct Mutex CSingleLock lock(&g_m); lock.Lock(); // Process lock.Unlock(); //return return 0; }
Semaphore Thread Synchronization Object:
Semaphore is a thread synchronization object that allows accessing the resource for a count between zero and maximum number of threads. If the Thread enters the semaphore, the count is incremented. If the thread completed the work and is removed from the thread queue, the count is decremented. When the thread count goes to zero, the synchronization object is non-signaled. Otherwise, the thread is signaled.
Win32 Semaphore Synchronization Object:
The CreateSemaphore function is used to create a named or unnamed semaphore thread synchronization object. The initial count and maximum count is mentioned in theCreateSemaphore function. The count is never negative and less then the total count value. TheWaitForSingleObject waits for more than one object in semaphore object.
The WaitForMultipleObjects function is non-signaled when all the objects are returned. TheOpenSemaphore function is used to open an existing handle to a semaphore object created within the process or another process. TheReleasesemaphore function is used to release the semaphore from the Thread synchronization queue. If theCreateSemaphore function has created the same named Thread synchronization object within the process, theCreateSemaphore returns 0. The GetLastError function is used to retrieve the reason for the failure.
Example:
HANDLE g_Semaphore; // Create a semaphore with initial and max. g_Semaphore = CreateSemaphore( NULL, 4, 4, NULL); DWORD dwWaitResult; //take ownership dwWaitResult = WaitForSingleObject( g_Semaphore, 0L); // Check the ownership // Release Semaphore ReleaseSemaphore( g_Semaphore, 1, NULL) ;
MFC Semaphore Synchronization Object:
The CSemaphore class allows us to create the CSemaphore object. TheCSemaphore class is derived from the abstract CSyncObject base class. TheCSemaphore class constructor is used to specify the count and maximum number of resource access.
The virtual destructor is used to delete the CSemaphore class object without affecting theCSyncObject base class. The Unlock function is used to unlock the resources.
Conclusion:
Thread Synchronization is used to access the shared resources in a multithread environment. The programmer decides the situation for when to use the synchronization object efficiently. The MFC Thread Synchronization classes internally call the Win32 API functions. The MFC Thread Synchronization classes wrap many of the functionalities form the Windows environment.
Adding a comment to your rating is optional