go使用go-redis操作redis 连接类型，pipline， 发布订阅
go使用go-redis操作redis 连接类型，pipline， 发布订阅
- 客户端Client（普通模式，主从模式也即是集群模式，哨兵模式）
- conn连接(连接， pipline， 发布订阅等)
- 示例程序(连接， pipline， 发布订阅等)
(一)客户端Client
（A）普通模式的客户端（go-redis依据用途提供了多种客户端创建的函数， 如下：）
func NewClient(opt *Options) *Client
func NewFailoverClient(failoverOpt *FailoverOptions) *Client
func (c *Client) Context() context.Context
func (c *Client) Do(args ...interface{}) *Cmd
func (c *Client) DoContext(ctx context.Context, args ...interface{}) *Cmd
func (c *Client) Options() *Options
func (c *Client) PSubscribe(channels ...string) *PubSub
func (c *Client) Pipeline() Pipeliner
func (c *Client) Pipelined(fn func(Pipeliner) error) ([]Cmder, error)
func (c *Client) PoolStats() *PoolStats
func (c *Client) Process(cmd Cmder) error
func (c *Client) ProcessContext(ctx context.Context, cmd Cmder) error
func (c *Client) SetLimiter(l Limiter) *Client
func (c *Client) Subscribe(channels ...string) *PubSub
func (c *Client) TxPipeline() Pipeliner
func (c *Client) TxPipelined(fn func(Pipeliner) error) ([]Cmder, error)
func (c *Client) Watch(fn func(*Tx) error, keys ...string) error
func (c *Client) WithContext(ctx context.Context) *Client
NewClient 创建一个普通连接
NewFailoverClient 具有故障检测以及故障转移的client
PSubscribe / Subscribe 发布订阅模式的client
Pipeline 启用pipline管道模式的client
PoolStats 连接池状态
Close 关闭连接
（B）集群模式的ClusterClient
func NewClusterClient(opt *ClusterOptions) *ClusterClient
func (c *ClusterClient) Close() error
func (c *ClusterClient) Context() context.Context
func (c *ClusterClient) DBSize() *IntCmd
func (c *ClusterClient) Do(args ...interface{}) *Cmd
func (c *ClusterClient) DoContext(ctx context.Context, args ...interface{}) *Cmd
func (c *ClusterClient) ForEachMaster(fn func(client *Client) error) error
func (c *ClusterClient) ForEachNode(fn func(client *Client) error) error
func (c *ClusterClient) ForEachSlave(fn func(client *Client) error) error
func (c *ClusterClient) Options() *ClusterOptions
func (c *ClusterClient) PSubscribe(channels ...string) *PubSub
func (c *ClusterClient) Pipeline() Pipeliner
func (c *ClusterClient) Pipelined(fn func(Pipeliner) error) ([]Cmder, error)
func (c *ClusterClient) PoolStats() *PoolStats
func (c *ClusterClient) Process(cmd Cmder) error
func (c *ClusterClient) ProcessContext(ctx context.Context, cmd Cmder) error
func (c *ClusterClient) ReloadState() error
func (c *ClusterClient) Subscribe(channels ...string) *PubSub
func (c *ClusterClient) TxPipeline() Pipeliner
func (c *ClusterClient) TxPipelined(fn func(Pipeliner) error) ([]Cmder, error)
func (c *ClusterClient) Watch(fn func(*Tx) error, keys ...string) error
func (c *ClusterClient) WithContext(ctx context.Context) *ClusterClient
方法与client大致相同
具体操作的是服务器配置的主从服务，实用于吞吐量较大的服务器架构，如果吞吐量较小，就没必要配置主从服务
也就没必要使用集群模式了
（C）哨兵SentinelClient
func NewSentinelClient(opt *Options) *SentinelClient
func (c *SentinelClient) CkQuorum(name string) *StringCmd
func (c SentinelClient) Close() error
func (c *SentinelClient) Context() context.Context
func (c *SentinelClient) Failover(name string) *StatusCmd
func (c *SentinelClient) FlushConfig() *StatusCmd
func (c *SentinelClient) GetMasterAddrByName(name string) *StringSliceCmd
func (c *SentinelClient) Master(name string) *StringStringMapCmd
func (c *SentinelClient) Masters() *SliceCmd
func (c *SentinelClient) Monitor(name, ip, port, quorum string) *StringCmd
func (c *SentinelClient) PSubscribe(channels ...string) *PubSub
func (c *SentinelClient) Ping() *StringCmd
func (c *SentinelClient) Process(cmd Cmder) error
func (c *SentinelClient) ProcessContext(ctx context.Context, cmd Cmder) error
func (c *SentinelClient) Remove(name string) *StringCmd
func (c *SentinelClient) Reset(pattern string) *IntCmd
func (c *SentinelClient) Sentinels(name string) *SliceCmd
func (c *SentinelClient) Set(name, option, value string) *StringCmd
func (c *SentinelClient) Slaves(name string) *SliceCmd
func (c SentinelClient) String() string
func (c *SentinelClient) Subscribe(channels ...string) *PubSub
func (c *SentinelClient) WithContext(ctx context.Context) *SentinelClient
（二）conn连接 （创建量客户端之后，需要与redis建立连接才能够发送请求进行使用在连接层， 提供了很多封装后的函数，如下：）
普通连接Conn
func (c Conn) Append(key, value string) *IntCmd
func (c Conn) Auth(password string) *StatusCmd
func (c Conn) BLPop(timeout time.Duration, keys ...string) *StringSliceCmd
func (c Conn) BRPop(timeout time.Duration, keys ...string) *StringSliceCmd
func (c Conn) BRPopLPush(source, destination string, timeout time.Duration) *StringCmd
func (c Conn) BZPopMax(timeout time.Duration, keys ...string) *ZWithKeyCmd
func (c Conn) BZPopMin(timeout time.Duration, keys ...string) *ZWithKeyCmd
func (c Conn) BgRewriteAOF() *StatusCmd
func (c Conn) BgSave() *StatusCmd
func (c Conn) BitCount(key string, bitCount *BitCount) *IntCmd
func (c Conn) BitField(key string, args ...interface{}) *IntSliceCmd
func (c Conn) BitOpAnd(destKey string, keys ...string) *IntCmd
....
func (c Conn) HKeys(key string) *StringSliceCmd
func (c Conn) HLen(key string) *IntCmd
func (c Conn) HMGet(key string, fields ...string) *SliceCmd
func (c Conn) HMSet(key string, fields map[string]interface{}) *StatusCmd
func (c Conn) HScan(key string, cursor uint64, match string, count int64) *ScanCmd
func (c Conn) HSet(key, field string, value interface{}) *BoolCmd
func (c Conn) HSetNX(key, field string, value interface{}) *BoolCmd
func (c Conn) HVals(key string) *StringSliceCmd
涉及很多函数， 函数名称基本可以通过redis的命令进行类比找到，这里不一一列举
Pipeline连接（pipline 管道批量执行命令，可以节约带宽）
提供的方法与conn基本一致
func (c Pipeline) Append(key, value string) *IntCmd
func (c Pipeline) Auth(password string) *StatusCmd
func (c Pipeline) BLPop(timeout time.Duration, keys ...string) *StringSliceCmd
func (c Pipeline) BRPop(timeout time.Duration, keys ...string) *StringSliceCmd
func (c Pipeline) BRPopLPush(source, destination string, timeout time.Duration) *StringCmd
func (c Pipeline) BZPopMax(timeout time.Duration, keys ...string) *ZWithKeyCmd
func (c Pipeline) BZPopMin(timeout time.Duration, keys ...string) *ZWithKeyCmd
func (c Pipeline) BgRewriteAOF() *StatusCmd
.....
PubSub发布订阅模式
func (c *PubSub) Channel() <-chan *Message
func (c *PubSub) ChannelSize(size int) <-chan *Message
func (c *PubSub) ChannelWithSubscriptions(size int) <-chan interface{}
func (c *PubSub) Close() error
func (c *PubSub) PSubscribe(patterns ...string) error
func (c *PubSub) PUnsubscribe(patterns ...string) error
func (c *PubSub) Ping(payload ...string) error
func (c *PubSub) Receive() (interface{}, error)
func (c *PubSub) ReceiveMessage() (*Message, error)
func (c *PubSub) ReceiveTimeout(timeout time.Duration) (interface{}, error)
func (c *PubSub) String() string
func (c *PubSub) Subscribe(channels ...string) error
func (c *PubSub) Unsubscribe(channels ...string) error
可以建立channel Channel()
设置超时时间ReceiveTimeout
Subscribe订阅
Unsubscribe取消订阅
PSubscribe 发布消息等
排他 TX
func (c Tx) Get(key string) *StringCmd
func (c Tx) GetBit(key string, offset int64) *IntCmd
func (c Tx) GetRange(key string, start, end int64) *StringCmd
func (c Tx) GetSet(key string, value interface{}) *StringCmd
func (c Tx) HDel(key string, fields ...string) *IntCmd
func (c Tx) HExists(key, field string) *BoolCmd
func (c Tx) HGet(key, field string) *StringCmd
func (c Tx) HGetAll(key string) *StringStringMapCmd
func (c Tx) HIncrBy(key, field string, incr int64) *IntCmd
func (c Tx) HIncrByFloat(key, field string, incr float64) *FloatCmd
func (c Tx) HKeys(key string) *StringSliceCmd
在conn的基础上加入排他性功能，提供的函数及方法与conn基本相同， 可以参考conn进行使用
（三）示例程序
连接
func ExampleClient() {
redisdb := redis.NewClient(&redis.Options{//如果使用tls/ssl 则在Options参数 TLSConfig *tls.Config 中指定
Addr: "192.168.137.18:6379",
Password: "", // no password set
DB: 0, // use default DB
})
err := redisdb.Set("key", "value", 0).Err()
if err != nil {
panic(err)
}
val, err := redisdb.Get("key").Result()
if err != nil {
panic(err)
}
fmt.Println("key", val)
val2, err := redisdb.Get("missing_key").Result()
if err == redis.Nil {
fmt.Println("missing_key does not exist")
} else if err != nil {
panic(err)
} else {
fmt.Println("missing_key", val2)
}
}
输出：
key value
missing_key does not exist
1. NewClient创建连接：
redisdb := redis.NewClient(&redis.Options{
Addr: "localhost:6379", // use default Addr
Password: "", // no password set
DB: 0, // use default DB
})
pong, err := redisdb.Ping().Result()
fmt.Println(pong, err)
2. 主从故障转移NewFailoverClient
redisdb := redis.NewFailoverClient(&redis.FailoverOptions{
MasterName: "master",
SentinelAddrs: []string{":26379"},
})
redisdb.Ping()
3. 集群NewClusterClient
redisdb := redis.NewClusterClient(&redis.ClusterOptions{
Addrs: []string{":7000", ":7001", ":7002", ":7003", ":7004", ":7005"},
})
redisdb.Ping()
4.url样式建立连接 ParseURL
opt, err := redis.ParseURL("redis://:qwerty@localhost:6379/1")
if err != nil {
panic(err)
}
fmt.Println("addr is", opt.Addr)
fmt.Println("db is", opt.DB)
fmt.Println("password is", opt.Password)
// Create client as usually.
_ = redis.NewClient(opt)
5.pipline
pipe := redisdb.Pipeline()
incr := pipe.Incr("pipeline_counter")
pipe.Expire("pipeline_counter", time.Hour)
// Execute
// INCR pipeline_counter
// EXPIRE pipeline_counts 3600
// using one redisdb-server roundtrip.
_, err := pipe.Exec()
fmt.Println(incr.Val(), err)
6.Pipelined
var incr *redis.IntCmd
_, err := redisdb.Pipelined(func(pipe redis.Pipeliner) error {
incr = pipe.Incr("pipelined_counter")
pipe.Expire("pipelined_counter", time.Hour)
return nil
})
fmt.Println(incr.Val(), err)
7.排他TxPipeline
pipe := redisdb.TxPipeline()
incr := pipe.Incr("tx_pipeline_counter")
pipe.Expire("tx_pipeline_counter", time.Hour)
// Execute
// MULTI
// INCR pipeline_counter
// EXPIRE pipeline_counts 3600
// EXEC
// using one redisdb-server roundtrip.
_, err := pipe.Exec()
fmt.Println(incr.Val(), err)
rdb := redis.NewClient(&redis.Options{
Addr: ":6379",
})
rdb.AddHook(redisHook{})
rdb.Pipelined(func(pipe redis.Pipeliner) error {
pipe.Ping()
pipe.Ping()
return nil
})
8.发布订阅
sub := client.Subscribe(queryResp)
iface, err := sub.Receive()
if err != nil {
// handle error
}
// Should be *Subscription, but others are possible if other actions have been
// taken on sub since it was created.
switch iface.(type) {
case *Subscription:
// subscribe succeeded
case *Message:
// received first message
case *Pong:
// pong received
default:
// handle error
}
ch := sub.Channel()
9.示例程序1：
package main
import (
"github.com/go-redis/redis"
"time"
"fmt"
)
func ExampleClient() {
redisdb := redis.NewClient(&redis.Options{
Addr: "192.168.137.18:6379",
Password: "", // no password set
DB: 0, // use default DB
})
//rdb.AddHook()
pubsub := redisdb.Subscribe("mychannel1")
// Wait for confirmation that subscription is created before publishing anything.
_, err := pubsub.Receive()
if err != nil {
panic(err)
}
// Go channel which receives messages.
ch := pubsub.Channel()
// Publish a message.
err = redisdb.Publish("mychannel1", "hello").Err()
if err != nil {
panic(err)
}
time.AfterFunc(time.Second, func() {
// When pubsub is closed channel is closed too.
_ = pubsub.Close()
})
// Consume messages.
for msg := range ch {
fmt.Println(msg.Channel, msg.Payload)
}
}
func main() {
ExampleClient()
}
输出：
mychannel1 hello
10.示例程序2：
func ExampleClient2() {
redisdb := redis.NewClient(&redis.Options{
Addr: "192.168.137.18:6379",
Password: "", // no password set
DB: 0, // use default DB
})
//rdb.AddHook()
pubsub := redisdb.Subscribe("mychannel2")
defer pubsub.Close()
for i := 0; i < 2; i++ {
// ReceiveTimeout is a low level API. Use ReceiveMessage instead.
msgi, err := pubsub.ReceiveTimeout(time.Second)
if err != nil {
break
}
switch msg := msgi.(type) {
case *redis.Subscription:
fmt.Println("subscribed to", msg.Channel)
_, err := redisdb.Publish("mychannel2", "hello").Result()
if err != nil {
panic(err)
}
case *redis.Message:
fmt.Println("received", msg.Payload, "from", msg.Channel)
default:
panic("unreached")
}
}
}
subscribed to mychannel2
received hello from mychannel2
参考 https://www.cnblogs.com/ExMan/p/11493192.html