Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT
U-Boot 2014.10-RK3288-10 (Oct 08 2016 - 15:45:52)
CPU: rk3288
cpu version = 0
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment
GetParam
Load FDT from resource image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2016-10-08#2.30
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
can't find power_ctr node for lcdc0
pll_src = 1, dclk_hz = 148500000, dclk_div = 2
no fuel gauge found
Hit any key to stop autoboot: 0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x02000000 (0x00686960)
ramdisk @ 0x05bf0000 (0x00146400)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561c5f2 ... OK
Add bank:0000000000000000, 0000000080000000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x500
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (roc@roc-System-Product-Name) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #130 SMP PREEMPT Mon Jun 15 18:15:56 CST 2020
[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[ 0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x7dc00000, offset:0x00000000
[ 0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x7dc00000 for uboot logo
[ 0.000000] rockchip_ion_reserve
[ 0.000000] ion heap(drm): base(0) size(0) align(0)
[ 0.000000] ion heap(cma): base(0) size(28000000) align(0)
[ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[ 0.000000] cma: CMA: reserved 640 MiB at 55c00000
[ 0.000000] ion_reserve: cma reserved base 55c00000 size 671088640
[ 0.000000] cma: CMA: reserved 16 MiB at 1f000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1ed9000 s13376 r8192 d15296 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523264
[ 0.000000] Kernel command line: vmalloc=496M console=ttyS2 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00300000@0x00092000(system),0x00008000@0x00392000(metadata),0x00002000@0x0039A000(baseparamer),0x00200000@0x0039C000(userdata),0x00020000@0x0059C000(radical_update),-@0x005BC000(user) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2016-10-08_15:45:52
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 1354956k/1354956k available, 742196k reserved, 884736K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0b7bcd8 (11728 kB)
[ 0.000000] .init : 0xc0b7c000 - 0xc0bd4440 ( 354 kB)
[ 0.000000] .data : 0xc0bd6000 - 0xc0d5ca40 (1563 kB)
[ 0.000000] .bss : 0xc0d5ca40 - 0xc0e7d6fc (1156 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start!
[ 0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
[ 0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
[ 0.000000] rkclk_init_clks: cnt_parent = 7
[ 0.000000] rkclk_init_clks: cnt_rate = 29
[ 0.000000] rk3288 set GPLL BW 20 for HDMI!
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 0
[ 0.000000] channel:0, lkg:40
[ 0.000000] target-temp:80
[ 0.000000] channel:2, lkg:0
[ 0.000000] channel:0, lkg:40
[ 0.000000] channel:1, lkg:23
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.345587] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.345602] pid_max: default: 32768 minimum: 301
[ 0.345719] Security Framework initialized
[ 0.345736] SELinux: Initializing.
[ 0.345811] Mount-cache hash table entries: 512
[ 0.346462] Initializing cgroup subsys debug
[ 0.346477] Initializing cgroup subsys memory
[ 0.346505] Initializing cgroup subsys freezer
[ 0.346534] CPU: Testing write buffer coherency: ok
[ 0.346854] /cpus/cpu@0 missing clock-frequency property
[ 0.346868] /cpus/cpu@1 missing clock-frequency property
[ 0.346877] /cpus/cpu@2 missing clock-frequency property
[ 0.346886] /cpus/cpu@3 missing clock-frequency property
[ 0.346940] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[ 0.346991] Setting up static identity map for 0xc08429d0 - 0xc0842a28
[ 0.350120] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x17f1 (version 3.1)
[ 0.423723] CPU1: Booted secondary processor
[ 0.423758] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[ 0.443405] CPU2: Booted secondary processor
[ 0.443429] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[ 0.463110] CPU3: Booted secondary processor
[ 0.463134] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[ 0.463235] Brought up 4 CPUs
[ 0.463263] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.463273] CPU: All CPU(s) started in SVC mode.
[ 0.464002] devtmpfs: initialized
[ 0.468189] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[ 0.469290] pinctrl core: initialized pinctrl subsystem
[ 0.469543] regulator-dummy: no parameters
[ 0.494701] NET: Registered protocol family 16
[ 0.496512] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.496894] ion_snapshot: 0x1eaa0000 map to 0xe0907000 and copy to 0xc0e589cc (version 0.1)
[ 0.497127] Registered FIQ tty driver
[ 0.497541] fiq-debugger is disabled in device tree
[ 0.498180] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[ 0.498201] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[ 0.498219] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[ 0.498235] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[ 0.498331] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[ 0.498394] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[ 0.498455] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[ 0.498516] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[ 0.498578] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[ 0.498638] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[ 0.498699] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[ 0.498760] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[ 0.498829] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[ 0.498892] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[ 0.498905] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[ 0.498916] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[ 0.498928] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[ 0.499559] rockchip_interrupts_register:bank_num=7
[ 0.501522] of_get_gpio_init_config:gpio[0] = 256, value = 0
[ 0.501542] of_get_gpio_init_config:gpio[1] = 136, value = 0
[ 0.501596] rockchip_pinctrl_probe:init ok
[ 0.508421] rk_iommu ff900800.iep_mmu: (iep) Enter
[ 0.508516] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.508529] rk_iommu ff900800.iep_mmu: (iep) Initialized
[ 0.508700] rk_iommu ff950800.vip_mmu: (vip) Enter
[ 0.508779] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.508791] rk_iommu ff950800.vip_mmu: (vip) Initialized
[ 0.508953] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[ 0.509034] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.509047] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[ 0.509210] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[ 0.509284] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.509297] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[ 0.509466] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[ 0.509549] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.509561] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[ 0.509727] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[ 0.509799] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.509811] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[ 0.509982] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[ 0.510072] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.510085] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[ 0.511874] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.511886] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.512500] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
[ 0.512526]
[ 0.512536]
[ 0.512544] __ddr_init__
[ 0.512553]
[ 0.512561]
[ 0.512569] DDR DEBUG: version 1.00 20150126
[ 0.512597] DDR DEBUG: Channel a:
[ 0.512605] DDR DEBUG: DDR3 Device
[ 0.512618] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ 0.512626] DDR DEBUG: Channel b:
[ 0.512633] DDR DEBUG: DDR3 Device
[ 0.512646] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ 0.512655] DDR DEBUG: addr=0xd66000
[ 0.512664] DDR DEBUG: stride=9, size=256, halfcap=40000000
[ 0.512673] DDR DEBUG: socAddr[0]=0xd66000, socAdAddr[1]=0xd66000
[ 0.512693] DDR DEBUG: dtar[0]=0x601ac000, dtar[1]=0x601ac000
[ 0.512745] DDR DEBUG: init success!!! freq=200MHz
[ 0.512753] DDR DEBUG: Channel a:
[ 0.512766] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.512778] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.512791] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.512804] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.512815] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.512824] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.512833] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.512840] DDR DEBUG: Channel b:
[ 0.512851] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.512864] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.512876] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[ 0.512888] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180, OPD=0x0, OPU=0x0
[ 0.512908] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.512916] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.512925] end_ddr_init__
[ 0.512932]
[ 0.512941]
[ 0.537615] bio: create slab <bio-0> at 0
[ 0.538145] Rockchip hdmi driver version 2.0
[ 0.538145] .
[ 0.539316] SCSI subsystem initialized
[ 0.539475] usbcore: registered new interface driver usbfs
[ 0.539522] usbcore: registered new interface driver hub
[ 0.539610] usbcore: registered new device driver usb
[ 0.542253] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[ 0.542737] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[ 0.543186] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[ 0.543434] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[ 0.544576] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[ 0.544710] media: Linux media interface: v0.10
[ 0.544751] Linux video capture interface: v2.00
[ 0.544796] pps_core: LinuxPPS API ver. 1 registered
[ 0.544806] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.544827] PTP clock support registered
[ 0.544891] i2c-core: driver [bq24296] using legacy suspend method
[ 0.544901] i2c-core: driver [bq24296] using legacy resume method
[ 0.545601] ion_drm_heap_create: 0@0
[ 0.545733] Rockchip ion module is successfully loaded (v1.1)
[ 0.545890] Advanced Linux Sound Architecture Driver Initialized.
[ 0.545911] @@@__net_dev_init__@@@
[ 0.546336] Bluetooth: Core ver 2.16
[ 0.546371] NET: Registered protocol family 31
[ 0.546381] Bluetooth: HCI device and connection manager initialized
[ 0.546398] Bluetooth: HCI socket layer initialized
[ 0.546411] Bluetooth: L2CAP socket layer initialized
[ 0.546437] Bluetooth: SCO socket layer initialized
[ 0.546668] cfg80211: Calling CRDA to update world regulatory domain
[ 0.547393] act8846_i2c_probe,line=898
[ 0.548398] act8846_parse_dt,line=746
[ 0.548875] act8846_i2c_probe: act8846_pmic_hold=1
[ 0.548910] act8846_i2c_probe: act8846_pmic_sleep=1
[ 0.548926] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[ 0.548940] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[ 0.551025] act_dcdc1: 1200 mV
[ 0.553973] vccio: 3300 mV
[ 0.555833] vdd_logic: 700 <--> 1500 mV at 1100 mV
[ 0.558783] act_dcdc4: 2000 mV
[ 0.560022] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[ 0.562373] act_ldo2: 1050 mV
[ 0.564679] act_ldo3: 2800 mV
[ 0.566986] act_ldo4: 3300 mV
[ 0.569284] act_ldo5: 3300 mV
[ 0.571614] act_ldo6: 1100 mV
[ 0.573911] vcc_18: 1800 mV
[ 0.576218] act_ldo8: 1850 mV
[ 0.580971] vdd_arm: 712 <--> 1500 mV at 1000 mV
[ 0.585678] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[ 0.586461] rk808_i2c_probe,line=1355
[ 0.587788] The device is not rk808 -11
[ 0.587871] rk808: probe of 0-001b failed with error -11
[ 0.587952] i2c-core: driver [rk818] using legacy suspend method
[ 0.587962] i2c-core: driver [rk818] using legacy resume method
[ 0.589669] Switching to clocksource arch_sys_counter
[ 0.613468] rga: Module initialized.
[ 0.614203] rga2 ff920000.rga: rga ion client create success!
[ 0.614374] rga: Driver loaded succesfully
[ 0.614581] fb disp policy is box
[ 0.614620] rk-fb rockchip-fb: rk fb ion client create success!
[ 0.614632] rk-fb rockchip-fb: rockchip framebuffer driver probe
[ 0.614816] @@@@@@@@@@@@@@@@_of_get_display_timings: of find display timings 22222@@
[ 0.614985] @@@@@@@@@@@@@@@@_rk_fb_prase_timing_dt: of find display timings rk fb .c @@
[ 0.614997]
[ 0.615006]
[ 0.615016] screen->mode.pixclock = 148500000
[ 0.615024] screen->mode.left_margin = 148
[ 0.615032] screen->mode.right_margin = 88
[ 0.615040] sreen->mode.xres = 1920
[ 0.615047] screen->mode.hsync_len = 44
[ 0.615055] screen->mode.upper_margin = 36
[ 0.615063] screen->mode.lower_margin = 4
[ 0.615070] screen->mode.yres = 1080
[ 0.615078] screen->mode.vsync_len = 5
[ 0.615085] screen->type = 1
[ 0.615092] screen->lvds_format = 0
[ 0.615099] screen->face = 0
[ 0.615106] screen->color_mode = 1
[ 0.615113] screen->dsp_lut = 0
[ 0.615121] screen->cabc_lut = 0
[ 0.615128] screen->cabc_gamma_base = 0
[ 0.615136]
[ 0.615145]
[ 0.615158] rk-screen rk_screen.8: rockchip screen probe success
[ 0.615313]
[ 0.615326]
[ 0.615336] __rk32_lvds_probe__
[ 0.615344]
[ 0.615353]
[ 0.615479] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[ 0.615837] rk32-edp ff970000.edp: screen is not edp!
[ 0.615857] rk32-edp: probe of ff970000.edp failed with error -22
[ 0.616103]
[ 0.616115]
[ 0.616124] __rk3288_lcdc_probe__
[ 0.616132]
[ 0.616141]
[ 0.616261]
[ 0.616shell@huaxian:/ $ 271]
[ 0.616279] __rk_fb_register__
[ 0.616287]
[ 0.616296]
[ 0.616320] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
[ 0.616546] graphics fb0: rockchip framebuffer registerd:fb0
[ 0.616858] graphics fb1: rockchip framebuffer registerd:fb1
[ 0.617038] graphics fb2: rockchip framebuffer registerd:fb2
[ 0.617209] graphics fb3: rockchip framebuffer registerd:fb3
[ 0.617940] rk3288-lcdc lcdc0: lcdc0: dclk:297000000>>fps:120
[ 0.617955] rk3288-lcdc lcdc0: wakeup from standby!
[ 0.648903] alloc_buffer:ion_phy_addr=0x10000000
[ 0.661807] fb0:phy:10000000>>vir:e0991000>>len:0x1800000
[ 0.669793] rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1eabe000
[ 0.669847] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[ 0.669931]
[ 0.669942]
[ 0.669951] __rk3288_lcdc_probe__
[ 0.669959]
[ 0.669969]
[ 0.670088]
[ 0.670099]
[ 0.670107] __rk_fb_register__
[ 0.670116]
[ 0.670124]
[ 0.670148] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[ 0.670159] rk_fb_trsm_ops_get:un supported transmitter:0!
[ 0.670429] graphics fb4: rockchip framebuffer registerd:fb4
[ 0.670778] graphics fb5: rockchip framebuffer registerd:fb5
[ 0.670951] graphics fb6: rockchip framebuffer registerd:fb6
[ 0.671122] graphics fb7: rockchip framebuffer registerd:fb7
[ 0.671935] unknow screen type: 0
[ 0.672005] rk3288-lcdc lcdc1: lcdc1: dclk:148500000>>fps:868
[ 0.672018] rk3288-lcdc lcdc1: wakeup from standby!
[ 0.675831] fb4:phy:10000000>>vir:e0991000>>len:0x1800000
[ 0.675847] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu enabled
[ 0.676226] rockchip_set_mux:warning ignore bank num 15
[ 0.676361] rockchip_set_mux:warning ignore bank num 15
[ 0.676480] rockchip_set_mux:warning ignore bank num 15
[ 0.676603] rockchip_set_mux:warning ignore bank num 15
[ 0.676715] rockchip_set_mux:warning ignore bank num 15
[ 0.676859] rockchip_set_mux:warning ignore bank num 15
[ 0.677435] rockchip_set_mux:warning ignore bank num 15
[ 0.677596] rockchip_set_mux:warning ignore bank num 15
[ 0.678150] rockchip_set_mux:warning ignore bank num 15
[ 0.678333] rockchip_set_mux:warning ignore bank num 15
[ 0.678874] rockchip_set_mux:warning ignore bank num 15
[ 0.679040] rockchip_set_mux:warning ignore bank num 15
[ 0.679571] rockchip_set_mux:warning ignore bank num 15
[ 0.679717] rockchip_set_mux:warning ignore bank num 15
[ 0.681259] NET: Registered protocol family 2
[ 0.681947] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.682023] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.682096] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.682167] TCP: reno registered
[ 0.682183] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.682207] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.682395] NET: Registered protocol family 1
[ 0.683033] Unpacking initramfs...
[ 0.754185] Freeing initrd memory: 1304K (c5bf0000 - c5d36000)
[ 0.754898] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[ 0.755481] vcodec_service: probe device ff9a0000.vpu_service
[ 0.755692] vcodec_service: No reset resource define
[ 0.755871] vcodec_service: ff9a0000.vpu_service: power on
[ 0.755978] vcodec_service: probe device ff9a0000.vpu_service
[ 0.755994] vcodec_service: checking hw id 4831
[ 0.757081] vcodec_service: ff9a0000.vpu_service: power off...
[ 0.757125] vcodec_service: done
[ 0.757134] vcodec_service: init success
[ 0.757203] vcodec_service: probe device ff9c0000.hevc_service
[ 0.757543] vcodec_service: ff9c0000.hevc_service: power on
[ 0.757606] vcodec_service: probe device ff9c0000.hevc_service
[ 0.757621] vcodec_service: checking hw id 6867
[ 0.758193] vcodec_service: ff9c0000.hevc_service: power off...
[ 0.758233] vcodec_service: done
[ 0.758242] vcodec_service: init success
[ 0.758370] rknandbase v1.0 2014-03-31
[ 0.758504] rknand: probe of ff400000.nandc failed with error -1
[ 0.758613] rknand_driver:ret = 0
[ 0.759787] audit: initializing netlink socket (disabled)
[ 0.759852] type=2000 audit(0.410:1): initialized
[ 0.760686] bounce pool size: 64 pages
[ 0.765282] fuse init (API version 7.22)
[ 0.765662] msgmni has been set to 952
[ 0.767497] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.767515] io scheduler noop registered
[ 0.767525] io scheduler deadline registered
[ 0.767626] io scheduler cfq registered (default)
[ 0.768823] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
[ 0.769525] IEP Driver loaded succesfully
[ 0.769615] Module initialized.
[ 0.770452] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[ 0.770470] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[ 0.771815] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[ 0.771834] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.772131] pwm-voltage-regulator pwm_regulator.22: unable to request PWM, trying legacy API
[ 0.772147] pwm-voltage-regulator pwm_regulator.22: unable to request legacy PWM
[ 0.772156] pwm_regulator_probe:error
[ 0.772177] platform pwm_regulator.22: Driver pwm-voltage-regulator requests probe deferral
[ 0.772381] rk_serial.c v1.8 2014-03-04
[ 0.772607] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[ 0.772789] serial ff180000.serial: membase e097e000
[ 0.772958] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
[ 0.773126] serial ff190000.serial: membase e419c000
[ 0.773267] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
[ 0.775168] console [ttyS2] enabled
[ 0.775354] serial ff690000.serial: membase fed60000
[ 0.775540] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 90) is a rk29_serial.3
[ 0.775715] serial ff1b0000.serial: membase e419e000
[ 0.776719] --11
[ 0.778605] loop: module loaded
[ 0.778998] zram: Created 1 device(s) ...
[ 0.779089] i2c-core: driver [mpu6050B1] using legacy suspend method
[ 0.779101] i2c-core: driver [mpu6050B1] using legacy resume method
[ 0.779119] mpu_init: Probe name mpu6050B1
[ 0.779309] ak8963_mod_init: Probe name ak8963_mod
[ 0.780018] SCSI Media Changer driver v0.25
[ 0.780273] dws->regs: e41be000
[ 0.781540] rockchip_spi_probe:num_cs=2,bus_num=0,irq=76,freq=45692308 ok
[ 0.781822] tun: Universal TUN/TAP device driver, 1.6
[ 0.781836] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.781966] vmac_init.
[ 0.782274] PPP generic driver version 2.4.2
[ 0.782422] PPP BSD Compression module registered
[ 0.782435] PPP Deflate Compression module registered
[ 0.782457] PPP MPPE Compression module registered
[ 0.782471] NET: Registered protocol family 24
[ 0.782510] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 0.782523] CSLIP: code copyright 1989 Regents of the University of California.
[ 0.782537] Rockchip WiFi SYS interface (V1.00) ...
[ 0.782570] esp_mem_init enter date May 25 2020 16:12:48
[ 0.782581] esp_mem_init VERSION [V2.5]
[ 0.782626] esp_mem_init complete
[ 0.782709] usbcore: registered new interface driver catc
[ 0.782750] usbcore: registered new interface driver kaweth
[ 0.782764] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.782803] usbcore: registered new interface driver pegasus
[ 0.782847] usbcore: registered new interface driver rtl8150
[ 0.782887] usbcore: registered new interface driver r8152
[ 0.782899] hso: drivers/net/usb/hso.c: Option Wireless
[ 0.782965] usbcore: registered new interface driver hso
[ 0.783010] usbcore: registered new interface driver asix
[ 0.783049] usbcore: registered new interface driver ax88179_178a
[ 0.783088] usbcore: registered new interface driver cdc_ether
[ 0.783132] usbcore: registered new interface driver cdc_eem
[ 0.783171] usbcore: registered new interface driver dm9601
[ 0.783209] usbcore: registered new interface driver dm9620
[ 0.783255] usbcore: registered new interface driver smsc75xx
[ 0.783302] usbcore: registered new interface driver smsc95xx
[ 0.783340] usbcore: registered new interface driver gl620a
[ 0.783384] usbcore: registered new interface driver net1080
[ 0.783425] usbcore: registered new interface driver plusb
[ 0.783465] usbcore: registered new interface driver rndis_host
[ 0.783504] usbcore: registered new interface driver cdc_subset
[ 0.783541] usbcore: registered new interface driver zaurus
[ 0.783582] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.783646] usbcore: registered new interface driver int51x1
[ 0.783685] usbcore: registered new interface driver kalmia
[ 0.783730] usbcore: registered new interface driver ipheth
[ 0.783775] usbcore: registered new interface driver sierra_net
[ 0.783816] usbcore: registered new interface driver cx82310_eth
[ 0.783863] usbcore: registered new interface driver cdc_ncm
[ 0.783903] usbcore: registered new interface driver qmi_wwan
[ 0.783942] usbcore: registered new interface driver cdc_mbim
[ 0.783955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.786403] EHCI: ehci_rk_probe e4200000 e4200010
[ 0.786421] rockchip_ehci_host ff500000.usb: EHCI Host Controller
[ 0.786453] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[ 0.786776] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[ 0.806224] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
[ 0.806311] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.806328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.806343] usb usb1: Product: EHCI Host Controller
[ 0.806356] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[ 0.806370] usb usb1: SerialNumber: ff500000.usb
[ 0.806823] hub 1-0:1.0: USB hub found
[ 0.806848] hub 1-0:1.0: 1 port detected
[ 0.807018] EHCI: ehci_rk_probe ok
[ 0.807126] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.807409] ohci-rockchip ff520000.usb: RK OHCI Host Controller
[ 0.807437] ohci-rockchip ff520000.usb: new USB bus registered, assigned bus number 2
[ 0.807482] ohci-rockchip ff520000.usb: irq 73, io mem 0xff520000
[ 0.824834] hdmi->edidread:1[ 0.869245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.869264] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.869279] usb usb2: Product: RK OHCI Host Controller
[ 0.869293] usb usb2: Manufacturer: Linux 3.10.0 ohci_hcd
[ 0.869307] usb usb2: SerialNumber: ff520000.usb
[ 0.869700] hub 2-0:1.0: USB hub found
[ 0.869724] hub 2-0:1.0: 1 port detected
[ 0.870044] usbcore: registered new interface driver cdc_acm
[ 0.870059] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.870120] usbcore: registered new interface driver usblp
[ 0.870167] usbcore: registered new interface driver cdc_wdm
[ 0.870240] usbcore: registered new interface driver usb-storage
[ 0.870282] usbcore: registered new interface driver ums-alauda
[ 0.870323] usbcore: registered new interface driver ums-cypress
[ 0.870364] usbcore: registered new interface driver ums-datafab
[ 0.870403] usbcore: registered new interface driver ums_eneub6250
[ 0.870450] usbcore: registered new interface driver ums-freecom
[ 0.870492] usbcore: registered new interface driver ums-isd200
[ 0.870533] usbcore: registered new interface driver ums-jumpshot
[ 0.870573] usbcore: registered new interface driver ums-karma
[ 0.870613] usbcore: registered new interface driver ums-onetouch
[ 0.870655] usbcore: registered new interface driver ums-sddr09
[ 0.870696] usbcore: registered new interface driver ums-sddr55
[ 0.870737] usbcore: registered new interface driver ums-usbat
[ 0.870832] usbcore: registered new interface driver usbserial
[ 0.870880] usbcore: registered new interface driver usbserial_generic
[ 0.870914] usbserial: USB Serial support registered for generic
[ 0.870961] usbcore: registered new interface driver option
[ 0.870994] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.871135] usbcore: registered new interface driver trancevibrator
[ 0.871148] usb20_otg: version 3.10a 21-DEC-2012
[ 0.871565] e4280040
[ 0.871580] Core Release: 3.10a
[ 0.871593] Setting default values for core params
[ 0.871741] Using Buffer DMA mode
[ 0.871755] Periodic Transfer Interrupt Enhancement - disabled
[ 0.871767] Multiprocessor Interrupt Enhancement - disabled
[ 0.871779] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.871791] ^^^^^^^^^^^^^^^^^Device Mode
[ 0.871807] Dedicated Tx FIFOs mode
[ 0.871844] pcd_init otg_dev = ddfa6a40
[ 0.872162] usb20_otg ff580000.usb: DWC OTG Controller
[ 0.872192] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 3
[ 0.872226] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[ 0.872285] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.872303] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.872318] usb usb3: Product: DWC OTG Controller
[ 0.872331] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 0.872344] usb usb3: SerialNumber: ff580000.usb
[ 0.872827] hub 3-0:1.0: USB hub found
========================================
[ 0.872855] Display Information (EDID)
[ 0.872863] hub 3-0:1.0: 1 port detected
[ 0.872878] ========================================
[ 0.872888] EDID Version 1.3
[ 0.872898] Manufacturer: ADA
[ 0.872907] Model: 4
[ 0.872915] Serial#: 1
[ 0.872924] Year: 2007 Week 1
[ 0.872933] Display Characteristics:
[ 0.872943] Monitor Operating Limits: Detailed Timings
[ 0.872961] 50 MHz 1024 1064 1112 1152 600 613 616 645 -HSync -VSync
[ 0.872984] Supported VESA Modes
[ 0.872996] Manufacturer's mask: 0
[ 0.873005] Standard Timings
[ 0.873017] Extrapolated
[ 0.873028] H: 43-43KHz V: 67-67Hz DCLK: 50MHz
[ 0.873037] Digital Display Input
Sync:
[ 0.873054] Max H-size in cm: 15
[ 0.873064] Max V-size in cm: 10
[ 0.873074] Gamma: 1.0
[ 0.873087] DPMS: Active no, Suspend no, Standby no
[ 0.873096] RGB Color Display
[ 0.873105] Chroma
[ 0.873113] RedX: 0.000 RedY: 0.000
[ 0.873126] GreenX: 0.000 GreenY: 0.000
[ 0.873137] BlueX: 0.000 BlueY: 0.000
[ 0.873148] WhiteX: 0.000 WhiteY: 0.000
[ 0.873160] First DETAILED Timing is preferred
[ 0.873171] Detailed Timings
[ 0.873183] usb20_host: version 3.10a 21-DEC-2012
[ 0.873180] 50 MHz 1024 1064 1112 1152 600 613 616 645 -HSync -VSync
[ 0.873213] Supported VESA Modes
[ 0.873222] Manufacturer's mask: 0
[ 0.873231] Standard Timings
[ 0.873240] ========================================
[ 0.873256] rockchip-hdmiv2 ff980000.hdmi: warning: no CEA video mode parsed from EDID !!!!
[ 0.873286] hdmi output corlor mode is 1
[ 0.873301] hdmi connect to lcdc1
[ 0.873312] switch:en=1,lcdc_id=1,screen type=6,cur type=0
[ 0.875690] e4300040
[ 0.875703] Core Release: 3.10a
[ 0.875714] Setting default values for core params
[ 0.875833] Using Buffer DMA mode
[ 0.875844] Periodic Transfer Interrupt Enhancement - disabled
[ 0.875855] Multiprocessor Interrupt Enhancement - disabled
[ 0.875866] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.875877] ^^^^^^^^^^^^^^^^^^Host Mode
[ 0.875904] usb20_host ff540000.usb: DWC OTG Controller
[ 0.875930] usb20_host ff540000.usb: new USB bus registered, assigned bus number 4
[ 0.875959] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[ 0.876051] Init: Power Port (0)
[ 0.876109] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.876127] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876141] usb usb4: Product: DWC OTG Controller
[ 0.876153] usb usb4: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 0.876187] usb usb4: SerialNumber: ff540000.usb
[ 0.876604] hub 4-0:1.0: USB hub found
[ 0.876626] hub 4-0:1.0: 1 port detected
[ 0.877355] usbcore: registered new interface driver xpad
[ 0.877417] usbcore: registered new interface driver usb_acecad
[ 0.877466] usbcore: registered new interface driver aiptek
[ 0.877511] usbcore: registered new interface driver gtco
[ 0.877556] usbcore: registered new interface driver hanwang
[ 0.877606] usbcore: registered new interface driver kbtab
[ 0.877661] usbcore: registered new interface driver wacom
[ 0.877916] sensor_register_slave:mma8452,id=17
[ 0.877931] sensor_register_slave:gs_mc3230,id=23
[ 0.877941] gsensor_init
[ 0.877951] sensor_register_slave:mpu6880_acc,id=24
[ 0.877963] sensor_register_slave:mpu6500_acc,id=25
[ 0.877974] sensor_register_slave:cm3217,id=48
[ 0.877985] sensor_register_slave:cm3218,id=49
[ 0.878205] .. rk pwm remotectl v1.1 init
[ 0.878465] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[ 0.880960] rtc_hym8563 0-0051: clock/calendar information is no longer guaranteed
[ 0.883923] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[ 0.883985] i2c /dev entries driver
[ 0.884751] usbcore: registered new interface driver uvcvideo
[ 0.884765] USB Video Class driver (1.1.1)
[ 0.884779] CamSys driver version: v0.32.0, CamSys head file version: v0.11.0
[ 0.886268] D1:camsys_platform_probe(1300): 1-gpios-cifpower: gpio=236
[ 0.886293] D1:camsys_platform_probe(1303): gpios-cifpower: gpio_request
[ 0.886314] D1:camsys_platform_probe(1305): 1-gpios-cifpower: gpio_request=0
[ 0.886335] D1:camsys_platform_probe(1314): gpios-cifpower: 236 high
[ 0.886392] D1:camsys_mipiphy_probe_cb(115): compatible is rockchip,rk3288
[ 0.886392]
[ 0.886471] D1:camsys_mipiphy_probe_cb(186): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
[ 0.886617] D1:camsys_mipiphy_probe_cb(183): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xe41f8000 size: 0x4000)
[ 0.887234] D1:camsys_platform_probe(1447): ff910000.isp memory:
[ 0.887253] D1:camsys_platform_probe(1457): Register memory (phy: 0xff910000 vir: 0xe42e0000 size: 0x10000)
[ 0.887270] D1:camsys_platform_probe(1452): I2c memory (phy: 0x1dfc6000 vir: 0xddfc6000 size: 0x1000)
[ 0.887284] D1:camsys_init_ext_fsh_module(20): init external flash module
[ 0.887297] D1:camsys_platform_probe(1472): Probe ff910000.isp device success
[ 0.887729] not find test_power_init dev node
[ 0.887789] i2c-core: driver [bq27320] using legacy suspend method
[ 0.887801] i2c-core: driver [bq27320] using legacy resume method
[ 0.888143] rockchip_temp_probe,line=364
[ 0.943984] tsadc ff280000.tsadc: initialized
[ 0.944374] device-mapper: uevent: version 1.0.3
[ 0.944622] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 0.944919] Bluetooth: HCI UART driver ver 2.2
[ 0.944936] Bluetooth: HCI H4 protocol initialized
[ 0.944947] Bluetooth: HCILL protocol initialized
[ 0.944959] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
[ 0.944972] rtk_btusb: Register usb char device interface for BT driver
[ 0.945155] usbcore: registered new interface driver rtk_btusb
[ 0.945808] DVFS WARNING: clk_enable_dvfs: clk(aclk_vio1) freq table all value are smaller than default(594000), use default, just enable dvfs
[ 0.949848] cpufreq version 1.0, suspend freq 1200 MHz
[ 0.950050] cpuidle: using governor ladder
[ 0.950063] cpuidle: using governor menu
[ 0.950100] Synopsys Designware Multimedia Card Interface Driver
[ 0.950111] MHSC version = Ver 2.00 2015-06-10
[ 0.950407] dw cru_regsbase addr 0x1d8.
[ 0.950420] dw cru_reset_offset val 3.
[ 0.950435] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[ 0.950477] dwmmc_rockchip ff0f0000.rksdmmc: failed to get hpclk_mmc
[ 0.950762] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[ 0.950939] dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[ 0.951101] 1358..dw_mci_set_ios: no card. [mmc0]
[ 0.963714] 1358..dw_mci_set_ios: no card. [mmc0]
[ 0.983381] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[ 0.983418] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[ 0.983437] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[ 0.983751] dw cru_regsbase addr 0x1d8.
[ 0.983764] dw cru_reset_offset val 0.
[ 0.983778] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[ 0.983815] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
[ 0.984548] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[ 0.984721] dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[ 0.985229] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[ 0.985297] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.003020] 1358..dw_mci_set_ios: no card. [mmc1]
[ 1.015477] mmc0: BKOPS_EN bit is not set
[ 1.017349] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[ 1.019632] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 1.019656] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[ 1.019675] [mmc0] tuning regsbase addr 0x218.
[ 1.020380] [mmc0] Data transmission error !!!! MINTSTS: [0x00000088]
[ 1.020390] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[ 1.020421] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-84
[ 1.020445] [mmc0] Data transmission error !!!! MINTSTS: [0x00000080]
[ 1.020454] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[ 1.020482] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[ 1.020527] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-248 (23 len)
[ 1.020539] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 282-282 (1 len)
[ 1.020549] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-248 (23 len)
[ 1.020559] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 124
[ 1.020604] mmc0: new HS200 MMC card at address 0001
[ 1.020869] mmcblk0: mmc0:0001 AJTD4R 14.5 GiB
[ 1.021203] uboot: 0x000400000 -- 0x000800000 (4 MB)
[ 1.021214] misc: 0x000800000 -- 0x000c00000 (4 MB)
[ 1.021224] resource: 0x000c00000 -- 0x001c00000 (16 MB)
[ 1.021233] kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[ 1.021241] boot: 0x002c00000 -- 0x004c00000 (32 MB)
[ 1.021249] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[ 1.021258] backup: 0x006c00000 -- 0x00a000000 (52 MB)
[ 1.021266] cache: 0x00a000000 -- 0x012000000 (128 MB)
[ 1.021274] kpanic: 0x012000000 -- 0x012400000 (4 MB)
[ 1.021282] system: 0x012400000 -- 0x072400000 (1536 MB)
[ 1.021291] metadata: 0x072400000 -- 0x073400000 (16 MB)
[ 1.021299] baseparamer: 0x073400000 -- 0x073800000 (4 MB)
[ 1.021308] userdata: 0x073800000 -- 0x0b3800000 (1024 MB)
[ 1.021316] radical_update: 0x0b3800000 -- 0x0b7800000 (64 MB)
[ 1.021325] user: 0x0b7800000 -- 0x3a3a00000 (11970 MB)
[ 1.021354] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15[ 1.022742] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[ 1.022756] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
1358..dw_mci_set_ios: no card. [mmc1]
[ 1.023061] dw cru_regsbase addr 0x1d8.
[ 1.023071] dw cru_reset_offset val 1.
[ 1.023080] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[ 1.023119] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
[ 1.023344] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[ 1.023458] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[ 1.023719] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.042378] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.062063] 1358..dw_mci_set_ios: no card. [mmc2]
[ 1.062099] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[ 1.062112] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[ 1.062385] leds-gpio leds.29: pins are not configured from the driver
[ 1.062593] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.064041] usbcore: registered new interface driver usbhid
[ 1.064051] usbhid: USB HID core driver
[ 1.064190] ashmem: initialized
[ 1.064315] logger: created 256K log 'log_main'
[ 1.064408] logger: created 256K log 'log_events'
[ 1.064508] logger: created 256K log 'log_radio'
[ 1.064609] logger: created 256K log 'log_system'
[ 1.065729] input: rk29-keypad as /devices/ff100000.adc/key.32/input/input1
[ 1.066570] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ff890000.rockchip-i2s; cannot claim for 2-0010
[ 1.066586] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
[ 1.066597] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
[ 1.066609] ES8323 2-0010: Error applying setting, reverse things back
[ 1.066896] es8323 probe i2c recv ok
[ 1.067835] rockchip-spdif ff880000.rockchip-spdif: spdif ready.
[ 1.068415] es8323_probe
[ 1.121095] rk_fb_switch_screen: wait update_regs_wait timeout
[ 1.121727] rk3288-lcdc lcdc1: lcdc1: dclk:52000000>>fps:52
[ 1.121765] pixel clk is 52000000 tmds clk is 52000000
[ 1.121797] rockchip-hdmiv2 ff980000.hdmi: [hdmi_dev_config_video] sucess output DVI.
[ 1.702029] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[ 1.702041] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[ 1.702052] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[ 1.702060] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[ 1.702069] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[ 1.702077] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
[ 1.702086] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
[ 1.702094] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
[ 1.702102] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
[ 1.702110] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
[ 1.702118] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
[ 1.702126] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
[ 1.702135] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
[ 1.702142] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
[ 1.702151] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
[ 1.702158] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
[ 1.702166] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
[ 1.702174] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
[ 1.702183] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
[ 1.702190] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
[ 1.702199] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
[ 1.702207] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
[ 1.702215] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
[ 1.702223] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
[ 1.702232] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
[ 1.702239] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
[ 1.702248] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
[ 1.702255] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
[ 1.702264] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
[ 1.702271] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
[ 1.702280] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
[ 1.702287] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
[ 1.702307] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
[ 1.702314] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
[ 1.702323] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
[ 1.702330] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
[ 1.702339] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
[ 1.702346] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
[ 1.702354] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
[ 1.702362] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
[ 1.702370] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
[ 1.702377] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
[ 1.702386] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
[ 1.702393] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
[ 1.702529] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
[ 1.702540] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
[ 1.702549] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
[ 1.702559] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[ 1.702578] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[ 1.709012] rockchip-es8323 rockchip-es8323.27: ES8323 HiFi <-> ff890000.rockchip-i2s mapping ok
[ 1.709421] input: RK_ES8323 Headphone Jack as /devices/rockchip-es8323.27/sound/card0/input2
[ 1.709822] u32 classifier
[ 1.709828] Actions configured
[ 1.709839] Netfilter messages via NETLINK v0.30.
[ 1.709890] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.710168] ctnetlink v0.93: registering with nfnetlink.
[ 1.710229] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 1.710236] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 1.710472] xt_time: kernel timezone is -0000
[ 1.710652] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.710771] arp_tables: (C) 2002 David S. Miller
[ 1.710805] TCP: cubic registered
[ 1.710811] Initializing XFRM netlink socket
[ 1.710983] NET: Registered protocol family 10
[ 1.711398] mip6: Mobile IPv6
[ 1.711421] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.711574] sit: IPv6 over IPv4 tunneling driver
[ 1.711847] NET: Registered protocol family 17
[ 1.711868] NET: Registered protocol family 15
[ 1.711915] Bridge firewalling registered
[ 1.711925] Ebtables v2.0 registered
[ 1.712082] Bluetooth: RFCOMM TTY layer initialized
[ 1.712106] Bluetooth: RFCOMM socket layer initialized
[ 1.712113] Bluetooth: RFCOMM ver 1.11
[ 1.712119] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.712125] Bluetooth: BNEP filters: protocol multicast
[ 1.712135] Bluetooth: BNEP socket layer initialized
[ 1.712141] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.712151] Bluetooth: HIDP socket layer initialized
[ 1.712176] _core: L2TP core driver, V2.0
[ 1.712188] _ppp: PPPoL2TP kernel driver, V2.0
[ 1.712194] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.712390] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.712400] [WLAN_RFKILL]: can't find rockchip,grf property
[ 1.712407] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[ 1.712415] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.712423] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[ 1.712431] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.712450] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[ 1.712468] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[ 1.712476] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.712501] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[ 1.712509] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.712550] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.712682] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[ 1.712697] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[ 1.712709] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[ 1.712722] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[ 1.712734] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[ 1.712775] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.712869] [BT_RFKILL]: ** disable irq
[ 1.712938] [BT_RFKILL]: ap6335 device registered.
[ 1.713563] rk3288_init_suspend
[ 1.713574] rk3288_suspend_init enter
[ 1.713770] rk3288_suspend_init: pm_ctrbits =200007
[ 1.713798] gpio_get_dts_info suspend:4
[ 1.713804] gpio_get_dts_info resume:4
[ 1.713810] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 1.713835] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 1.713962] clks_gating_suspend_init:clkgt info ok
[ 1.714042] Registering SWP/SWPB emulation handler
[ 1.714053] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 0x02000000@0x7dc00000
[ 1.716553] ddrfreq: verion 1.2 20140526
[ 1.716567] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[ 1.716575] ddrfreq: auto-freq=0
[ 1.716580] ddrfreq: auto-freq-table[0] 240MHz
[ 1.716585] ddrfreq: auto-freq-table[1] 324MHz
[ 1.716590] ddrfreq: auto-freq-table[2] 456MHz
[ 1.716596] ddrfreq: auto-freq-table[3] 528MHz
[ 1.719860] regulator-dummy: disabling
[ 1.720072] =======================================================
[ 1.720080] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 1.720086] =======================================================
[ 1.720091] WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
[ 1.720140] dhd_module_init: in
[ 1.720148] ======== bcm_wlan_set_plat_data ========
[ 1.720154] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 1.720173] host_oob_irq: 196
[ 1.720178] host_oob_irq_flags=4
[ 1.720182] dhd_wifi_platform_load: Enter
[ 1.720194] pcd_pullup, is_on 0
[ 1.720198] Power-up adapter 'DHD generic adapter'
[ 1.720215] wifi_platform_set_power = 1
[ 1.720221] ======== PULL WL_REG_ON HIGH! ========
[ 1.720226] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1.720232] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 1.720235] file system registered
[ 1.720243] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 1.720756] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.720765] android_usb gadget: Number of LUNs=2
[ 1.720772] lun0: LUN: removable file: (no medium)
[ 1.720778] lun1: LUN: removable file: (no medium)
[ 1.720916] android_usb gadget: android_usb ready
[ 1.721004] sensor_init: Probe name sensors
[ 1.721018] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[ 1.721546] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:00:01 UTC (1293883201)
[ 1.725915] @@@@__rockchip_headset_init___@@@
[ 1.726172] @@@@_rockchip_spdif_card_probe__@@
[ 1.727674] rockchip-spdif-card rockchip-spdif-card.25: rk-hdmi-spdif-hifi <-> ff880000.rockchip-spdif mapping ok
[ 1.727981] @@@rockchip_spdif_card_probe end
[ 1.728015] @@@__tcp_congestion_default__@@
[ 1.728022] @@@_tcp_fastopen_init_@@@
[ 1.728365] usbcore: registered new interface driver snd-usb-audio
[ 1.728372] ALSA device list:
[ 1.728377] #0: RK_ES8323
[ 1.728381] #1: RK-SPDIF-CARD
[ 1.728773] Freeing unused kernel memory: 352K (c0b7c000 - c0bd4000)
[ 1.819738] [WLAN_RFKILL]: wifi turn on power. 156
[ 1.976643] type=1403 audit(1293883201.750:2): policy loaded auid=4294967295 ses=4294967295
[ 2.003831] init: invalid gid 'trace'
[ 2.026377] wifi_platform_bus_enumerate device present 1
[ 2.026394] ======== Card detection to detect SDIO card! ========
[ 2.026408] mmc2:mmc host rescan start!
[ 2.102435] init: /dev/hw_random not found
[ 2.102508] keychord: using input dev ff680000.pwm for fevent
[ 2.102524] keychord: using input dev rk29-keypad for fevent
[ 2.107520] init: /dev/hw_random not found
[ 2.108462] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[ 2.109270] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: The filesystem is already 393216 blocks long. Nothing to do!resize2fs:
[ 2.111647] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
[ 2.115737] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 2.115830] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/system,/system,ext4)=0
[ 2.116654] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[ 2.121493] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 2.121541] e2fsck: system: clean, 1885/84672 files, 115405/393216 blocks
[ 2.125074] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[ 2.125156] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/system,target=/system,type=ext4)=0
[ 2.131960] EXT4-fs (mmcblk0p8): recovery complete
[ 2.132327] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 2.132385] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0
[ 2.132714] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[ 2.136155] EXT4-fs (mmcblk0p11): recovery complete
[ 2.136174] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 2.136230] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,/metadata,ext4)=0
[ 2.137006] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata
[ 2.141114] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 2.141150] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks
[ 2.144892] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 2.144963] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0
[ 2.145007] fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[ 2.145871] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
[ 2.145909] fsck.f2fs: fsck.f2fs terminated by exit(255)
[ 2.146166] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=f2fs)=-1
[ 2.146493] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[ 2.177396] EXT4-fs (mmcblk0p13): recovery complete
[ 2.177772] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 2.177857] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,/data,ext4)=0
[ 2.179021] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[ 2.183673] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 2.183711] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata: clean, 3154/65536 files, 248645/262144 blocks
[ 2.187537] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic
[ 2.187608] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0
[ 2.187630] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata on /data with fs_type=ext4 instead of f2fs
[ 2.201823] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.
[ 2.201909] mali ffa30000.gpu: Continuing without Mali clock control
[ 2.201950] mali pd enabled
[ 2.201963] clk enabled
[ 2.201976] MALI_DVFS_STEP = 4, div_dvfs = 10
[ 2.201986] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
[ 2.201996] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
[ 2.202005] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
[ 2.202016] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
[ 2.202110] turn on mali power
[ 2.202122] kbase_platform_rk_init,register_reboot_notifier
[ 2.202165] hrtimer: interrupt took 12250 ns
[ 2.202270] mali ffa30000.gpu: GPU identified as 0x0750 r1p0 status 0
[ 2.203095] mali ffa30000.gpu: Probed as mali0
[ 2.204168] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 2.204795] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 2.205356] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 2.206123] zram0: detected capacity change from 0 to 533413888
[ 2.242858] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
[ 2.252031] Adding 520908k swap on /dev/block/zram0. Priority:-1 extents:1 across:520908k SS
[ 2.278718] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.280746] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.282628] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.283361] EXT4-fs (mmcblk0p13): Unrecognized mount option "background_gc=on" or missing value
[ 2.285719] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.289099] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 2.290864] drmboot: module license 'unspecified' taints kernel.
[ 2.290887] Disabling lock debugging due to kernel taint
[ 2.291135] drm init, 20140910
[ 2.291600] drm init ok
[ 2.293260] bat_cap: oldcap path is /sys/devices/ff100000.adc
[ 2.293318] bat_cap: oldcap_path no exist
[ 2.293571] binder: 156:156 transaction failed 29189, size 0-0
[ 2.293987] init: Warning! Service displayd needs a SELinux domain defined; please fix!
[ 2.297815] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[ 2.297845] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[ 2.298052] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[ 2.298514] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.298528] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.298546] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.298556] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.298578] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.298588] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.298602] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.298612] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.304731] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 2.306370] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[ 2.306832] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
[ 2.307048] init: Warning! Service drmservice needs a SELinux domain defined; please fix!
[ 2.307300] init: cannot find '/system/bin/akmd', disabling 'akmd'
[ 2.308795] android_usb: already disabled
[ 2.310918] read descriptors
[ 2.310934] read strings
[ 2.310953] mtp_bind_config
[ 2.310978] pcd_pullup, is_on 1
[ 2.341501] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.341527] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 2.341594] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
[ 2.344026] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 2.344053] mmc2: new high speed SDIO card at address 0001
[ 2.360257] bcmsdh_register: register client driver
[ 2.360372] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2.360449] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 2.360457] bus num (host idx)=2, slot num (rca)=1
[ 2.360464] found adapter info 'DHD generic adapter'
[ 2.360760] F1 signature read @0x18000000=0x15264345
[ 2.363088] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
[ 2.363529] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
[ 2.363578] wifi_platform_get_mac_addr
[ 2.363585] ======== bcm_wlan_get_mac_address ========
[ 2.363591] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[ 2.363600] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[ 2.363607] [WLAN_RFKILL]: This mac address is not valid, ignored...
[ 2.363616] dhd_conf_set_chiprev: chip=0x4345, chiprev=6
[ 2.363658] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt
[ 2.363980] wl_create_event_handler(): thread:wl_event_handler:b1 started
[ 2.363985] tsk Enter, tsk = 0xdd74149c
[ 2.364122] dhd_attach(): thread:dhd_watchdog_thread:b2 started
[ 2.364181] dhd_attach(): thread:dhd_dpc:b3 started
[ 2.364233] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
[ 2.364259] dhd_attach(): thread:dhd_rxf:b4 started
[ 2.364272] dhd_deferred_work_init: work queue initialized
[ 2.364403] dhdsdio_probe_init: set use_rxchain 1 from config.txt
[ 2.371826] Dongle Host Driver, version 1.201.59.5 (r506368)
[ 2.371826] Compiled in drivers/net/wireless/bcmdhd on May 25 2020 at 16:12:53
[ 2.372166] Register interface [wlan0] MAC: cc:4b:73:8a:fd:ed
[ 2.372166]
[ 2.372180] dhd_prot_ioctl : bus is down. we have nothing to do
[ 2.372220] bcmsdh_oob_intr_unregister: Enter
[ 2.372227] bcmsdh_oob_intr_unregister: irq is not registered
[ 2.372237] dhd_txglom_enable: enable 0
[ 2.372243] dhd_bus_devreset: WLAN OFF DONE
[ 2.372284] wifi_platform_set_power = 0
[ 2.372290] ======== PULL WL_REG_ON LOW! ========
[ 2.372297] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 2.404236] logd.auditd: start
[ 2.479017] [WLAN_RFKILL]: wifi shut off power.
[ 2.479029] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[ 2.479036] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 2.479089] dhd_module_init: Exit err=0
[ 2.516198] RKNAND_GET_SN_SECTOR
[ 2.516211] return ret = 0
[ 2.523676] RKNAND_GET_DRM_KEY
[ 2.523688] return ret = 0
[ 2.784059] EHCI: rk_ehci_hcd_enable, disable host controller
[ 2.852942] dwc_otg_hcd_enable, enable host controller
[ 2.966527] Using Buffer DMA mode
[ 2.966539] Periodic Transfer Interrupt Enhancement - disabled
[ 2.966544] Multiprocessor Interrupt Enhancement - disabled
[ 2.966551] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.966557] ^^^^^^^^^^^^^^^^^^Host Mode
[ 3.010455] Init: Power Port (0)
[ 3.256436] Indeed it is in host mode hprt0 = 00021501
[ 3.278263] healthd: No charger supplies found
[ 3.278278] healthd: No battery devices found
[ 3.370134] rk3288-lcdc lcdc0: blank mode:0
[ 3.390316] rk_iommu ff940300.vopl_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1eac0000
[ 3.453211] usb 4-1: new high-speed USB device number 2 using usb20_host
[ 3.453288] Indeed it is in host mode hprt0 = 00001101
[ 3.650335] usb 4-1: New USB device found, idVendor=1a40, idProduct=0101
[ 3.650348] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.650356] usb 4-1: Product: USB 2.0 Hub [MTT]
[ 3.650888] hub 4-1:1.0: USB hub found
[ 3.650952] hub 4-1:1.0: 4 ports detected
[ 4.845508] warning: `system_server' uses 32-bit capabilities (legacy support in use)
[ 6.188958] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 6.188971] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 6.188979] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 6.189066] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[ 6.189079] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 6.189090] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[ 6.189118] rockchip_gpio_request:GPIO7-13
[ 6.189128] rockchip_gpio_set:GPIO7-13 level = 1
[ 6.189135] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 6.189144] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x15
[ 6.189152] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7400,result=0x7400
[ 6.189160] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 6.189180] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: OV13850) register success
[ 6.194226] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 6.194236] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 6.194341] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 6.194368] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 6.195438] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[ 6.196496] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
[ 6.197558] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 1
[ 6.200819] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[ 6.202037] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[ 6.202112] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 0
[ 6.202129] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
[ 6.202140] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[ 6.203224] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 6.203259] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 6.205312] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 6.205332] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 6.205342] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 6.205349] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 6.205356] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 6.212900] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 6.212912] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 6.212920] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 6.213018] D1:camsys_extdev_register(243): Get RK30_PIN3_PB4(108) gpio(active: 1) for dev_id 0x4000000 success!
[ 6.213031] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x4000000 success!
[ 6.213042] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x4000000 success!
[ 6.213050] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[ 6.213143] D1:camsys_extdev_register(268): Extdev(dev_id: 0x4000000 dev_name: OV5640) register success
[ 6.218183] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 6.218212] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 6.218317] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 6.218346] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 6.219418] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[ 6.220479] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
[ 6.221549] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(108) set 0
[ 6.224823] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!
[ 6.224912] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(108) set 1
[ 6.224925] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
[ 6.224936] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[ 6.226018] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 6.226048] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 6.228118] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x4000000) is deregister success
[ 6.228133] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 6.228143] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 6.228150] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 6.228157] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 6.233397] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 6.233409] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 6.233417] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 6.233500] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[ 6.233526] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: TC358749XBG) register success
[ 6.238562] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 6.238572] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 6.238676] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 6.238700] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[ 6.239758] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[ 6.240819] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 6.241871] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[ 6.245398] E:camsys_i2c_write(78): i2c write dev(addr:0x1f) failed!
[ 6.246899] E:camsys_i2c_write(78): i2c write dev(addr:0xf) failed!
[ 6.246985] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[ 6.246994] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 6.247002] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[ 6.248089] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 6.248122] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 6.250178] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[ 6.250195] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 6.250206] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 6.250213] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 6.250220] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 6.252198] type=1400 audit(1293883206.090:3): avc: denied { execute } for pid=498 comm="mediaserver" name="sh" dev="mmcblk0p10" ino=317 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[ 6.252390] type=1400 audit(1293883206.090:4): avc: denied { read open } for pid=498 comm="mediaserver" path="/system/bin/sh" dev="mmcblk0p10" ino=317 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[ 6.252500] type=1400 audit(1293883206.090:5): avc: denied { execute_no_trans } for pid=498 comm="mediaserver" path="/system/bin/sh" dev="mmcblk0p10" ino=317 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[ 6.254560] type=1400 audit(1293883206.090:6): avc: denied { getattr } for pid=498 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[ 6.254659] type=1400 audit(1293883206.090:7): avc: denied { execute } for pid=498 comm="sh" name="toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[ 6.254727] type=1400 audit(1293883206.090:8): avc: denied { read open } for pid=498 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[ 6.254796] type=1400 audit(1293883206.090:9): avc: denied { execute_no_trans } for pid=498 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=332 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[ 8.756949] [otg id chg] last id -1 current id 1
[ 8.756974] PortPower off
[ 8.756983] rk_battery_charger_detect_cb , battery_charger_detect 6
[ 8.856419] Using Buffer DMA mode
[ 8.856445] Periodic Transfer Interrupt Enhancement - disabled
[ 8.856453] Multiprocessor Interrupt Enhancement - disabled
[ 8.856461] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 8.856468] ^^^^^^^^^^^^^^^^^Device Mode
[ 8.983622] es8323_mic_state_ctrl read: 0
[ 8.983643] mic_state_switch 0
[ 8.983653] hp_det = 0,insert hp
[ 8.983659] hp mic use intern
[ 9.292057] healthd: battery none chg=
[ 9.347546] rk_battery_charger_detect_cb , battery_charger_detect 0
[ 9.454071] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[ 9.454094] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[ 9.454100] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[ 9.454107] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[ 9.454113] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[ 9.454120] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[ 9.454126] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[ 9.836319] acc_open
[ 9.836347] acc_release
[ 10.621248] Current WiFi chip is AP6210.
[ 10.621362] Current WiFi chip is AP6210.
[ 10.624407] Current WiFi chip is AP6210.
[ 10.835608] dhd_open: Enter dde6d800
[ 10.835643]
[ 10.835643] Dongle Host Driver, version 1.201.59.5 (r506368)
[ 10.835643] Compiled in drivers/net/wireless/bcmdhd on May 25 2020 at 16:12:53
[ 10.835661] wl_android_wifi_on in 1
[ 10.835667] wl_android_wifi_on in 2: g_wifi_on=0
[ 10.835675] wifi_platform_set_power = 1
[ 10.835681] ======== PULL WL_REG_ON HIGH! ========
[ 10.835687] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 10.835693] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 10.835701] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 10.941447] [WLAN_RFKILL]: wifi turn on power. 156
[ 11.036738] pm policy 0 -> 1
[ 11.148070] sdio_reset_comm():
[ 11.155161] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 11.155184] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
[ 11.185782] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 11.189312] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 11.193342] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 11.202771] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 11.211235] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 11.332645] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 11.332690] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 11.333472]
[ 11.333472]
[ 11.333472] dhd_bus_devreset: == WLAN ON ==
[ 11.333544] F1 signature read @0x18000000=0x15264345
[ 11.335713] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x2
[ 11.336124] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
[ 11.336262] dhdsdio_probe_init: set use_rxchain 1 from config.txt
[ 11.339750] dhd_conf_read_config: Ignore config file /system/etc/firmware/config.txt
[ 11.339770] dhd_conf_set_fw_name_by_chip: firmware_path=/system/etc/firmware/fw_bcm43455c0_ag.bin
[ 11.339779] Final fw_path=/system/etc/firmware/fw_bcm43455c0_ag.bin
[ 11.339786] Final nv_path=/system/etc/firmware/nvram_AP6255.txt
[ 11.339791] Final conf_path=/system/etc/firmware/config.txt
[ 11.428819] NVRAM version: AP6255_NVRAM_V1.0_29052015
[ 11.433921] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 11.510393] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 11.510480] bcmsdh_oob_intr_register: Enter
[ 11.510487] bcmsdh_oob_intr_register: HW_OOB enabled
[ 11.510497] bcmsdh_oob_intr_register OOB irq=196 flags=4
[ 11.510566] bcmsdh_oob_intr_register: enable_irq_wake
[ 11.511786] dhd_conf_set_band: Set band 0
[ 11.511926] dhd_preinit_ioctls: Set tcpack_sup_mode 0
[ 11.511942] wifi_platform_get_mac_addr
[ 11.511948] ======== bcm_wlan_get_mac_address ========
[ 11.511954] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
[ 11.511964] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
[ 11.511974] [WLAN_RFKILL]: This mac address is not valid, ignored...
[ 11.513729] Firmware up: op_mode=0x0005, MAC=cc:4b:73:8a:fd:ed
[ 11.513741] dhd_conf_set_country: Set country CN, revision 38
[ 11.552430] Country code: CN (CN/38)
[ 11.552745] dhd_conf_set_roam: Set roam_off 1
[ 11.554385] dhd_conf_set_txbf: set txbf 1
[ 11.554813] dhd_conf_set_txbf Set txbf to 1 failed -23
[ 11.559781] Firmware version = wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e
[ 11.559798] Driver: 1.201.59.5 (r506368)
[ 11.559798] Firmware: wl0: Aug 25 2015 18:58:57 version 7.45.69 (r581703) FWID 01-24037f6e
[ 11.559988] dhd_txglom_enable: enable 1
[ 11.559998] dhd_conf_set_disable_proptx: set disable_proptx 0
[ 11.561248] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
[ 11.561687] wl_android_wifi_on: Success
[ 11.611687] dhd_open: Exit ret=0
[ 11.733217] WLC_E_IF: NO_IF set, event Ignored
[ 11.810702] Current WiFi chip is AP6210.
[ 11.813373] dhd_pktfilter_offload_set: failed to add pktfilter 102 0 0 0 0xFFFFFF 0x01005E, retcode = -2
[ 11.845897] dhd_set_suspend: Remove extra suspend setting
[ 13.699538] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.699568] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.699577] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 13.699666] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[ 13.699678] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 13.699692] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[ 13.701731] rockchip_gpio_set:GPIO7-13 level = 1
[ 13.701739] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 13.701751] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x15
[ 13.701762] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7400,result=0x7400
[ 13.701770] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 13.701796] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: OV13850) register success
[ 13.710478] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 13.710496] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 13.710603] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 13.710644] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 13.711743] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[ 13.712901] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
[ 13.714107] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 1
[ 13.719382] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[ 13.724940] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[ 13.725059] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 0
[ 13.725071] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
[ 13.725087] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[ 13.726259] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 13.726321] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 13.728405] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 13.728432] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 13.728446] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.728453] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.728460] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 13.729858] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.729873] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.729887] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 13.729996] D1:camsys_extdev_register(243): Get RK30_PIN3_PB4(108) gpio(active: 1) for dev_id 0x4000000 success!
[ 13.730019] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x4000000 success!
[ 13.730033] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x4000000 success!
[ 13.730043] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[ 13.730145] D1:camsys_extdev_register(268): Extdev(dev_id: 0x4000000 dev_name: OV5640) register success
[ 13.735213] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 13.735227] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 13.735333] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 13.735366] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 13.736564] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[ 13.738216] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
[ 13.739622] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(108) set 0
[ 13.743461] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!
[ 13.743563] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(108) set 1
[ 13.743575] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
[ 13.743587] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[ 13.744974] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 13.745023] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 13.747291] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x4000000) is deregister success
[ 13.747309] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 13.747322] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.747329] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.747336] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 13.748071] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.748084] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.748096] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 13.748178] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[ 13.748208] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: TC358749XBG) register success
[ 13.753287] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 13.753303] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 13.753409] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 13.753442] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[ 13.754513] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[ 13.756140] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 13.757429] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[ 13.762034] E:camsys_i2c_write(78): i2c write dev(addr:0x1f) failed!
[ 13.765670] E:camsys_i2c_write(78): i2c write dev(addr:0xf) failed!
[ 13.765771] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[ 13.765782] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 13.765792] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[ 13.766903] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 13.766951] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 13.769022] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[ 13.769041] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 13.769054] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.769060] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.769069] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 13.775188] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.775204] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.775212] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 13.775302] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[ 13.777834] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 13.777853] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[ 13.777894] rockchip_gpio_set:GPIO7-13 level = 1
[ 13.777901] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 13.777912] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x15
[ 13.777921] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7400,result=0x7400
[ 13.777929] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 13.777964] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000 dev_name: OV13850) register success
[ 13.783023] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 13.783040] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 13.783145] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 13.783179] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 13.784258] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[ 13.785330] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
[ 13.786402] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 1
[ 13.789667] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[ 13.791187] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[ 13.791279] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 0
[ 13.791292] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
[ 13.791304] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[ 13.792405] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 13.792446] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 13.794510] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 13.794527] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 13.794542] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.794549] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.794556] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 13.795683] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.795696] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.795705] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 13.795792] D1:camsys_extdev_register(243): Get RK30_PIN3_PB4(108) gpio(active: 1) for dev_id 0x4000000 success!
[ 13.795807] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x4000000 success!
[ 13.795820] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x4000000 success!
[ 13.795830] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[ 13.795929] D1:camsys_extdev_register(268): Extdev(dev_id: 0x4000000 dev_name: OV5640) register success
[ 13.800999] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 13.801012] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 13.801117] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 13.801147] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 13.802233] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[ 13.803311] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(79) set 1
[ 13.804383] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(108) set 0
[ 13.807657] E:camsys_i2c_write(78): i2c write dev(addr:0x78) failed!
[ 13.807757] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(108) set 1
[ 13.807770] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(79) set 0
[ 13.807782] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[ 13.808901] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 13.808960] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 13.811026] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x4000000) is deregister success
[ 13.811044] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 13.811057] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.811063] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.811072] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 13.811677] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.811688] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 13.811696] D1:camsys_open(739): camsys_marvin(ddfbb410) is opened!
[ 13.811769] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[ 13.811800] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000 dev_name: TC358749XBG) register success
[ 13.816911] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 13.816927] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 13.817032] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 13.817062] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[ 13.818129] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[ 13.819200] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 13.820293] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[ 13.824482] E:camsys_i2c_write(78): i2c write dev(addr:0x1f) failed!
[ 13.826400] E:camsys_i2c_write(78): i2c write dev(addr:0xf) failed!
[ 13.826490] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[ 13.826498] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 13.826506] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[ 13.834506] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 13.834551] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 13.836672] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[ 13.836703] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 13.836726] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.836735] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 13.836745] D1:camsys_release(763): camsys_marvin(ddfbb410) is closed
[ 14.341325] Connectting with 18:bc:5a:c5:ca:a8 channel (36) ssid "CLOUDAP_CAA0_5G", len (15)
[ 14.341325]
[ 14.708585] wl_iw_event: Link UP with BSSID=18:BC:00:00:CA:A8
[ 14.708690] wl_bss_connect_done succeeded with 18:bc:5a:c5:ca:a8
[ 14.794698] wl_bss_connect_done succeeded with 18:bc:5a:c5:ca:a8
[ 14.844669] dhd_set_suspend: Remove extra suspend setting
[ 14.850280] dhd_pno_get_for_batch : wifi location service is not supported
[ 14.850295] ANDROID-ERROR) failed to getting batching results
[ 14.850659] dhd_pno_stop_for_batch : wifi location service is not supported
[ 14.850677] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
[ 14.850685] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
[ 14.850694] ANDROID-ERROR) failed to stop batching scan
[ 15.120516] type=1400 audit(1293883215.100:10): avc: denied { getattr } for pid=1330 comm="PTF-BackgroundE" path="/proc/sysrq-trigger" dev="proc" ino=4026533036 scontext=u:r:untrusted_app:s0 tcontext=u:object_r:proc_sysrq:s0 tclass=file permissive=1
