opensips 安装及基本配置

opensips 安装及基本配置


http://wenku.baidu.com/view/f64ea4d333d4b14e852468c2.html



1 . 官方网站 http://www.opensips.org/ 的 download 中下载 opensips 软件包
 
2 .  编译：
Java代码


   1. tar zxvf opensips-1.6.2-tls_src.tar.gz   
   2. cd opensips-1.6.2-tls   


tar zxvf opensips-1.6.2-tls_src.tar.gz 
cd opensips-1.6.2-tls 




 
3 . 安装之前更改 makefile ：
删除 Makefile 中的 exclude_modules 的 db-mysql,使opensips使用mysql数据
 
4.   安装
make all
可能会缺少一下工具，缺少什么装什么就是了。另外可能提示找不到mysql.h等文件，只要把文件拷贝到对应的地方就行了。


make install
默认安装路径 /usr/local 下
 
5. 配置 vim /usr/local/etc/opensips/opensipsctlrc，把 mysql 的相关的注释去掉
Java代码


   1. ## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, or DBTEXT, by default none is loaded   
   2. # If you want to setup a database with opensipsdbctl, you must at least specify   
   3. # this parameter.   
   4.   DBENGINE=MYSQL   
   5. ## database host   
   6.   DBHOST=localhost   
   7. ## database name (for ORACLE this is TNS name)   
   8.   DBNAME=opensips   
   9. # database path used by dbtext or db_berkeley   
  10.   DB_PATH="/usr/local/etc/opensips/dbtext"   
  11. ## database read/write user   
  12.   DBRWUSER=opensips   
  13. ## password for database read/write user   
  14.   DBRWPW="opensipsrw"   
  15. ## database read only user   
  16.   DBROUSER=opensipsro   
  17. ## password for database read only user   
  18.   DBROPW=opensipsro   
  19. ## database super user (for ORACLE this is 'scheme-creator' user)   
  20.   DBROOTUSER="root"   
  21. # user name column   
  22.   USERCOL="username"   


## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, or DBTEXT, by default none is loaded 
# If you want to setup a database with opensipsdbctl, you must at least specify 
# this parameter. 
  DBENGINE=MYSQL 
## database host 
  DBHOST=localhost 
## database name (for ORACLE this is TNS name) 
  DBNAME=opensips 
# database path used by dbtext or db_berkeley 
  DB_PATH="/usr/local/etc/opensips/dbtext" 
## database read/write user 
  DBRWUSER=opensips 
## password for database read/write user 
  DBRWPW="opensipsrw" 
## database read only user 
  DBROUSER=opensipsro 
## password for database read only user 
  DBROPW=opensipsro 
## database super user (for ORACLE this is 'scheme-creator' user) 
  DBROOTUSER="root" 
# user name column 
  USERCOL="username" 






6. 执行 opensips/sbin/ 下的 opensipsdbctl
Java代码


   1.    ./opensipsdbctl create ( 生成 opensips 数据库 )   


   ./opensipsdbctl create ( 生成 opensips 数据库 ) 






7. 这个时候如果重新登录phpmyadmin，会看到已经新建了opensips数据库


8. opensips的运行
Java代码


   1.   /usr/local/sbin/下的opensipsctl start来启动opensips  
   2.   ps aux | grep   opensips 检查应该已经运行了。  
   3.   opensips/sbin/下的opensipsctl stop来停止opensips  


  /usr/local/sbin/下的opensipsctl start来启动opensips
  ps aux | grep   opensips 检查应该已经运行了。
  opensips/sbin/下的opensipsctl stop来停止opensips






至此基本的opensips配置已经完成了，可以用软件software phone来连接到这个sip server上面并注册成功，不需要先在mysql数据库中添加对应的记录。




9. opensips 认证功能的实现
Java代码


   1. labuser@cnta02:/etc/init.d$ cat /usr/local/etc/opensips/opensips.cfg  
   2. #  
   3. # $Id: opensips.cfg 6464 2009-12-24 08:00:54Z bogdan_iancu $  
   4. #  
   5. # OpenSIPS basic configuration script  
   6. #     by Anca Vamanu  
   7. #  
   8. # Please refer to the Core CookBook at:  
   9. #      http://www.opensips.org/index.php?n=Resources.DocsCookbooks  
  10. # for a explanation of possible statements, functions and parameters.  
  11. #  
  12.   
  13.   
  14. ####### Global Parameters #########  
  15.   
  16. debug=3  
  17. log_stderror=no  
  18. log_facility=LOG_LOCAL0  
  19.   
  20. fork=yes  
  21. children=4  
  22.   
  23. /* uncomment the following lines to enable debugging */  
  24. debug=6  
  25. #fork=no  
  26. log_stderror=yes  
  27.   
  28. /* uncomment the next line to disable TCP (default on) */  
  29. #disable_tcp=yes  
  30.   
  31. /* uncomment the next line to enable the auto temporary blacklisting of  
  32.    not available destinations (default disabled) */  
  33. #disable_dns_blacklist=no  
  34.   
  35. /* uncomment the next line to enable IPv6 lookup after IPv4 dns   
  36.    lookup failures (default disabled) */  
  37. #dns_try_ipv6=yes  
  38.   
  39. /* uncomment the next line to disable the auto discovery of local aliases 
  40.    based on revers DNS on IPs (default on) */  
  41. #auto_aliases=no  
  42.   
  43. /* uncomment the following lines to enable TLS support  (default off) */  
  44. #disable_tls = no  
  45. #listen = tls:your_IP:5061  
  46. #tls_verify_server = 1  
  47. #tls_verify_client = 1  
  48. #tls_require_client_certificate = 0  
  49. #tls_method = TLSv1  
  50. #tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"  
  51. #tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"  
  52. #tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"  
  53.   
  54.   
  55. port=5060  
  56.   
  57. /* uncomment and configure the following line if you want opensips to  
  58.    bind on a specific interface/port/proto (default bind on all available) */  
  59. #listen=udp:192.168.1.2:5060  
  60.   
  61.   
  62. ####### Modules Section ########  
  63.   
  64. #set module path  
  65. mpath="/usr/local/lib/opensips/modules/"  
  66.   
  67. /* uncomment next line for MySQL DB support */  
  68. loadmodule "db_mysql.so"  
  69. loadmodule "signaling.so"  
  70. loadmodule "sl.so"  
  71. loadmodule "tm.so"  
  72. loadmodule "rr.so"  
  73. loadmodule "maxfwd.so"  
  74. loadmodule "usrloc.so"  
  75. loadmodule "registrar.so"  
  76. loadmodule "textops.so"  
  77. loadmodule "mi_fifo.so"  
  78. loadmodule "uri.so"  
  79. loadmodule "xlog.so"  
  80. loadmodule "acc.so"  
  81. /* uncomment next lines for MySQL based authentication support  
  82.    NOTE: a DB (like db_mysql) module must be also loaded */  
  83. loadmodule "auth.so"  
  84. loadmodule "auth_db.so"  
  85. /* uncomment next line for aliases support 
  86.    NOTE: a DB (like db_mysql) module must be also loaded */  
  87. loadmodule "alias_db.so"  
  88. /* uncomment next line for multi-domain support 
  89.    NOTE: a DB (like db_mysql) module must be also loaded 
  90.    NOTE: be sure and enable multi-domain support in all used modules 
  91.          (see "multi-module params" section ) */  
  92. #loadmodule "domain.so"  
  93. /* uncomment the next two lines for presence server support 
  94.    NOTE: a DB (like db_mysql) module must be also loaded */  
  95. #loadmodule "presence.so"  
  96. #loadmodule "presence_xml.so"  
  97.   
  98.   
  99. # ----------------- setting module-specific parameters ---------------  
 100.   
 101.   
 102. # ----- mi_fifo params -----  
 103. modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")  
 104. modparam("mi_fifo", "fifo_mode", 0666)  
 105.   
 106. # ----- rr params -----  
 107. # add value to ;lr param to cope with most of the UAs  
 108. modparam("rr", "enable_full_lr", 1)  
 109. # do not append from tag to the RR (no need for this script)  
 110. modparam("rr", "append_fromtag", 0)  
 111.   
 112.   
 113. # ----- registrar params -----  
 114. /* uncomment the next line not to allow more than 10 contacts per AOR */  
 115. #modparam("registrar", "max_contacts", 10)  
 116.   
 117.   
 118. # ----- usrloc params -----  
 119. modparam("usrloc", "db_mode",   0)  
 120. /* uncomment the following lines if you want to enable DB persistency 
 121.    for location entries */  
 122. modparam("usrloc", "db_mode",   2)  
 123. #modparam("usrloc", "db_url",  
 124. #   "mysql://opensips:opensipsrw@localhost/opensips")  
 125.   
 126.   
 127. # ----- uri params -----  
 128. modparam("uri", "use_uri_table", 0)  
 129.   
 130.   
 131. # ----- acc params -----  
 132. /* what sepcial events should be accounted ? */  
 133. modparam("acc", "early_media", 1)  
 134. modparam("acc", "report_ack", 1)  
 135. modparam("acc", "report_cancels", 1)  
 136. /* by default ww do not adjust the direct of the sequential requests. 
 137.    if you enable this parameter, be sure the enable "append_fromtag" 
 138.    in "rr" module */  
 139. modparam("acc", "detect_direction", 0)  
 140. /* account triggers (flags) */  
 141. modparam("acc", "failed_transaction_flag", 3)  
 142. modparam("acc", "log_flag", 1)  
 143. modparam("acc", "log_missed_flag", 2)  
 144. /* uncomment the following lines to enable DB accounting also */  
 145. modparam("acc", "db_flag", 1)  
 146. modparam("acc", "db_missed_flag", 2)  
 147.   
 148.   
 149. # ----- auth_db params -----  
 150. /* uncomment the following lines if you want to enable the DB based 
 151.    authentication */  
 152. modparam("auth_db", "calculate_ha1", yes)  
 153. modparam("auth_db", "password_column", "password")  
 154. #modparam("auth_db", "db_url",  
 155. #   "mysql://opensips:opensipsrw@localhost/opensips")  
 156. #modparam("auth_db", "load_credentials", "")  
 157.   
 158.   
 159. # ----- alias_db params -----  
 160. /* uncomment the following lines if you want to enable the DB based 
 161.    aliases */  
 162. #modparam("alias_db", "db_url",  
 163. #   "mysql://opensips:opensipsrw@localhost/opensips")  
 164.   
 165.   
 166. # ----- domain params -----  
 167. /* uncomment the following lines to enable multi-domain detection 
 168.    support */  
 169. #modparam("domain", "db_url",  
 170. #   "mysql://opensips:opensipsrw@localhost/opensips")  
 171. #modparam("domain", "db_mode", 1)   # Use caching  
 172.   
 173.   
 174. # ----- multi-module params -----  
 175. /* uncomment the following line if you want to enable multi-domain support 
 176.    in the modules (dafault off) */  
 177. #modparam("alias_db|auth_db|usrloc|uri", "use_domain", 1)  
 178.   
 179.   
 180. # ----- presence params -----  
 181. /* uncomment the following lines if you want to enable presence */  
 182. #modparam("presence|presence_xml", "db_url",  
 183. #   "mysql://opensips:opensipsrw@localhost/opensips")  
 184. #modparam("presence_xml", "force_active", 1)  
 185. #modparam("presence", "server_address", "sip:192.168.1.2:5060")  
 186.   
 187.   
 188. ####### Routing Logic ########  
 189.   
 190.   
 191. # main request routing logic  
 192.   
 193. route{  
 194.   
 195.     if (!mf_process_maxfwd_header("10")) {  
 196.         sl_send_reply("483","Too Many Hops");  
 197.         exit;  
 198.     }  
 199.   
 200.     if (has_totag()) {  
 201.         # sequential request withing a dialog should  
 202.         # take the path determined by record-routing  
 203.         if (loose_route()) {  
 204.             if (is_method("BYE")) {  
 205.                 setflag(1); # do accounting ...  
 206.                 setflag(3); # ... even if the transaction fails  
 207.             } else if (is_method("INVITE")) {  
 208.                 # even if in most of the cases is useless, do RR for  
 209.                 # re-INVITEs alos, as some buggy clients do change route set  
 210.                 # during the dialog.  
 211.                 record_route();  
 212.             }  
 213.             # route it out to whatever destination was set by loose_route()  
 214.             # in $du (destination URI).  
 215.             route(1);  
 216.         } else {  
 217.             /* uncomment the following lines if you want to enable presence */  
 218.             ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {  
 219.             ##  # in-dialog subscribe requests  
 220.             ##  route(2);  
 221.             ##  exit;  
 222.             ##}  
 223.             if ( is_method("ACK") ) {  
 224.                 if ( t_check_trans() ) {  
 225.                     # non loose-route, but stateful ACK; must be an ACK after   
 226.                     # a 487 or e.g. 404 from upstream server  
 227.                     t_relay();  
 228.                     exit;  
 229.                 } else {  
 230.                     # ACK without matching transaction ->  
 231.                     # ignore and discard  
 232.                     exit;  
 233.                 }  
 234.             }  
 235.             sl_send_reply("404","Not here");  
 236.         }  
 237.         exit;  
 238.     }  
 239.   
 240.     #initial requests  
 241.   
 242.     # CANCEL processing  
 243.     if (is_method("CANCEL"))  
 244.     {  
 245.         if (t_check_trans())  
 246.             t_relay();  
 247.         exit;  
 248.     }  
 249.   
 250.     t_check_trans();  
 251.   
 252.     # authenticate if from local subscriber (uncomment to enable auth)  
 253.     # authenticate all initial non-REGISTER request that pretend to be  
 254.     # generated by local subscriber (domain from FROM URI is local)  
 255.     if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/  
 256.     ##if (!(method=="REGISTER") && is_from_local())  /*multidomain version*/  
 257.     {  
 258.         if (!proxy_authorize("", "subscriber")) {  
 259.             proxy_challenge("", "0");  
 260.             exit;  
 261.         }  
 262.         if (!db_check_from()) {  
 263.             sl_send_reply("403","Forbidden auth ID");  
 264.             exit;  
 265.         }  
 266.       
 267.         consume_credentials();  
 268.         # caller authenticated  
 269.     }  
 270.   
 271.     # preloaded route checking  
 272.     if (loose_route()) {  
 273.         xlog("L_ERR",  
 274.         "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");  
 275.         if (!is_method("ACK"))  
 276.             sl_send_reply("403","Preload Route denied");  
 277.         exit;  
 278.     }  
 279.   
 280.     # record routing  
 281.     if (!is_method("REGISTER|MESSAGE"))  
 282.         record_route();  
 283.   
 284.     # account only INVITEs  
 285.     if (is_method("INVITE")) {  
 286.         setflag(1); # do accounting  
 287.     }  
 288.     if (!uri==myself)  
 289.     ## replace with following line if multi-domain support is used  
 290.     ##if (!is_uri_host_local())  
 291.     {  
 292.         append_hf("P-hint: outbound\r\n");   
 293.         # if you have some interdomain connections via TLS  
 294.         ##if($rd=="tls_domain1.net") {  
 295.         ##  t_relay("tls:domain1.net");  
 296.         ##  exit;  
 297.         ##} else if($rd=="tls_domain2.net") {  
 298.         ##  t_relay("tls:domain2.net");  
 299.         ##  exit;  
 300.         ##}  
 301.         route(1);  
 302.     }  
 303.   
 304.     # requests for my domain  
 305.   
 306.     ## uncomment this if you want to enable presence server   
 307.     ##   and comment the next 'if' block  
 308.     ##   NOTE: uncomment also the definition of route[2] from  below  
 309.     ##if( is_method("PUBLISH|SUBSCRIBE"))  
 310.     ##      route(2);  
 311.   
 312.     if (is_method("PUBLISH"))  
 313.     {  
 314.         sl_send_reply("503", "Service Unavailable");  
 315.         exit;  
 316.     }  
 317.       
 318.   
 319.     if (is_method("REGISTER"))  
 320.     {  
 321.         # authenticate the REGISTER requests (uncomment to enable auth)  
 322.         if (!www_authorize("", "subscriber"))  
 323.         {  
 324.             www_challenge("", "0");  
 325.             exit;  
 326.         }  
 327.           
 328.         if (!db_check_to())   
 329.         {  
 330.             sl_send_reply("403","Forbidden auth ID");  
 331.             exit;  
 332.         }  
 333.   
 334.         if (!save("location"))  
 335.             sl_reply_error();  
 336.   
 337.         exit;  
 338.     }  
 339.   
 340.     if ($rU==NULL) {  
 341.         # request with no Username in RURI  
 342.         sl_send_reply("484","Address Incomplete");  
 343.         exit;  
 344.     }  
 345.   
 346.     # apply DB based aliases (uncomment to enable)  
 347.     alias_db_lookup("dbaliases");  
 348.   
 349.     # do lookup with method filtering  
 350.     if (!lookup("location","m")) {  
 351.         switch ($retcode) {  
 352.             case -1:  
 353.             case -3:  
 354.                 t_newtran();  
 355.                 t_reply("404", "Not Found");  
 356.                 exit;  
 357.             case -2:  
 358.                 sl_send_reply("405", "Method Not Allowed");  
 359.                 exit;  
 360.         }  
 361.     }  
 362.   
 363.     # when routing via usrloc, log the missed calls also  
 364.     setflag(2);  
 365.   
 366.     route(1);  
 367. }  
 368.   
 369.   
 370. route[1] {  
 371.     # for INVITEs enable some additional helper routes  
 372.     if (is_method("INVITE")) {  
 373.         t_on_branch("2");  
 374.         t_on_reply("2");  
 375.         t_on_failure("1");  
 376.     }  
 377.   
 378.     if (!t_relay()) {  
 379.         sl_reply_error();  
 380.     };  
 381.     exit;  
 382. }  
 383.   
 384.   
 385. # Presence route  
 386. /* uncomment the whole following route for enabling presence 
 387.    NOTE: do not forget to enable the call of this route from the main 
 388.      route */  
 389. ##route[2]  
 390. ##{  
 391. ##  if (!t_newtran())  
 392. ##  {  
 393. ##      sl_reply_error();  
 394. ##      exit;  
 395. ##  };  
 396. ##  
 397. ##  if(is_method("PUBLISH"))  
 398. ##  {  
 399. ##      handle_publish();  
 400. ##      t_release();  
 401. ##  }  
 402. ##  else  
 403. ##  if( is_method("SUBSCRIBE"))  
 404. ##  {  
 405. ##      handle_subscribe();  
 406. ##      t_release();  
 407. ##  }  
 408. ##  
 409. ##  exit;  
 410. ##}  
 411.   
 412.   
 413. branch_route[2] {  
 414.     xlog("new branch at $ru\n");  
 415. }  
 416.   
 417.   
 418. onreply_route[2] {  
 419.     xlog("incoming reply\n");  
 420. }  
 421.   
 422.   
 423. failure_route[1] {  
 424.     if (t_was_cancelled()) {  
 425.         exit;  
 426.     }  
 427.   
 428.     # uncomment the following lines if you want to block client   
 429.     # redirect based on 3xx replies.  
 430.     ##if (t_check_status("3[0-9][0-9]")) {  
 431.     ##t_reply("404","Not found");  
 432.     ##  exit;  
 433.     ##}  
 434.   
 435.     # uncomment the following lines if you want to redirect the failed   
 436.     # calls to a different new destination  
 437.     ##if (t_check_status("486|408")) {  
 438.     ##  sethostport("192.168.2.100:5060");  
 439.     ##  # do not set the missed call flag again  
 440.     ##  t_relay();  
 441.     ##}  
 442. }  


labuser@cnta02:/etc/init.d$ cat /usr/local/etc/opensips/opensips.cfg
#
# $Id: opensips.cfg 6464 2009-12-24 08:00:54Z bogdan_iancu $
#
# OpenSIPS basic configuration script
#     by Anca Vamanu
#
# Please refer to the Core CookBook at:
#      http://www.opensips.org/index.php?n=Resources.DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#




####### Global Parameters #########


debug=3
log_stderror=no
log_facility=LOG_LOCAL0


fork=yes
children=4


/* uncomment the following lines to enable debugging */
debug=6
#fork=no
log_stderror=yes


/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes


/* uncomment the next line to enable the auto temporary blacklisting of 
   not available destinations (default disabled) */
#disable_dns_blacklist=no


/* uncomment the next line to enable IPv6 lookup after IPv4 dns 
   lookup failures (default disabled) */
#dns_try_ipv6=yes


/* uncomment the next line to disable the auto discovery of local aliases
   based on revers DNS on IPs (default on) */
#auto_aliases=no


/* uncomment the following lines to enable TLS support  (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"




port=5060


/* uncomment and configure the following line if you want opensips to 
   bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:192.168.1.2:5060




####### Modules Section ########


#set module path
mpath="/usr/local/lib/opensips/modules/"


/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "signaling.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"
loadmodule "xlog.so"
loadmodule "acc.so"
/* uncomment next lines for MySQL based authentication support 
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
   NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
   NOTE: a DB (like db_mysql) module must be also loaded
   NOTE: be sure and enable multi-domain support in all used modules
         (see "multi-module params" section ) */
#loadmodule "domain.so"
/* uncomment the next two lines for presence server support
   NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "presence.so"
#loadmodule "presence_xml.so"




# ----------------- setting module-specific parameters ---------------




# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("mi_fifo", "fifo_mode", 0666)


# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)




# ----- registrar params -----
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)




# ----- usrloc params -----
modparam("usrloc", "db_mode",   0)
/* uncomment the following lines if you want to enable DB persistency
   for location entries */
modparam("usrloc", "db_mode",   2)
#modparam("usrloc", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")




# ----- uri params -----
modparam("uri", "use_uri_table", 0)




# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
/* uncomment the following lines to enable DB accounting also */
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)




# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
   authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
#modparam("auth_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("auth_db", "load_credentials", "")




# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
   aliases */
#modparam("alias_db", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")




# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
   support */
#modparam("domain", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("domain", "db_mode", 1)   # Use caching




# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
   in the modules (dafault off) */
#modparam("alias_db|auth_db|usrloc|uri", "use_domain", 1)




# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
#modparam("presence|presence_xml", "db_url",
# "mysql://opensips:opensipsrw@localhost/opensips")
#modparam("presence_xml", "force_active", 1)
#modparam("presence", "server_address", "sip:192.168.1.2:5060")




####### Routing Logic ########




# main request routing logic


route{


if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}


if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do RR for
# re-INVITEs alos, as some buggy clients do change route set
# during the dialog.
record_route();
}
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(1);
} else {
/* uncomment the following lines if you want to enable presence */
##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") {
## # in-dialog subscribe requests
## route(2);
## exit;
##}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after 
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}


#initial requests


# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}


t_check_trans();


# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/
##if (!(method=="REGISTER") && is_from_local())  /*multidomain version*/
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (!db_check_from()) {
sl_send_reply("403","Forbidden auth ID");
exit;
}

consume_credentials();
# caller authenticated
}


# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}


# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();


# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if (!uri==myself)
## replace with following line if multi-domain support is used
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n"); 
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}


# requests for my domain


## uncomment this if you want to enable presence server 
##   and comment the next 'if' block
##   NOTE: uncomment also the definition of route[2] from  below
##if( is_method("PUBLISH|SUBSCRIBE"))
## route(2);


if (is_method("PUBLISH"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}



if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}

if (!db_check_to()) 
{
sl_send_reply("403","Forbidden auth ID");
exit;
}


if (!save("location"))
sl_reply_error();


exit;
}


if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}


# apply DB based aliases (uncomment to enable)
alias_db_lookup("dbaliases");


# do lookup with method filtering
if (!lookup("location","m")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}


# when routing via usrloc, log the missed calls also
setflag(2);


route(1);
}




route[1] {
# for INVITEs enable some additional helper routes
if (is_method("INVITE")) {
t_on_branch("2");
t_on_reply("2");
t_on_failure("1");
}


if (!t_relay()) {
sl_reply_error();
};
exit;
}




# Presence route
/* uncomment the whole following route for enabling presence
   NOTE: do not forget to enable the call of this route from the main
     route */
##route[2]
##{
## if (!t_newtran())
## {
## sl_reply_error();
## exit;
## };
##
## if(is_method("PUBLISH"))
## {
## handle_publish();
## t_release();
## }
## else
## if( is_method("SUBSCRIBE"))
## {
## handle_subscribe();
## t_release();
## }
##
## exit;
##}




branch_route[2] {
xlog("new branch at $ru\n");
}




onreply_route[2] {
xlog("incoming reply\n");
}




failure_route[1] {
if (t_was_cancelled()) {
exit;
}


# uncomment the following lines if you want to block client 
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}


# uncomment the following lines if you want to redirect the failed 
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## # do not set the missed call flag again
## t_relay();
##}
}










10.对于opensipsctlrc文件更改，把OSIPS_FIFO打开


Java代码


   1. OSIPS_FIFO="/tmp/opensips_fifo"