等风来不如迎风去
等风来不如迎风去

make kernel MENUCONFIG=1

/home/zhangbin/STM/STLinux-2.4/devkit/sh4/bin
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4/bin# ls
posix-console              sh4-linux-gdb               sh4-linux-objdump
sh4-linux-addr2line        sh4-linux-gpg-error-config  sh4-linux-pkg-config
sh4-linux-ar               sh4-linux-gprof             sh4-linux-qmake
sh4-linux-as               sh4-linux-icu-config        sh4-linux-ranlib
sh4-linux-c++              sh4-linux-initdconfig       sh4-linux-rcc
sh4-linux-c++filt          sh4-linux-ld                sh4-linux-readelf
sh4-linux-cpp              sh4-linux-ld.bfd            sh4-linux-sdl-config
sh4-linux-cramfsck         sh4-linux-libgcrypt-config  sh4-linux-shellconfig
sh4-linux-directfb-config  sh4-linux-libpng14-config   sh4-linux-size
sh4-linux-elfedit          sh4-linux-libpng-config     sh4-linux-strings
sh4-linux-freetype-config  sh4-linux-lrelease          sh4-linux-strip
sh4-linux-g++              sh4-linux-mkcramfs          sh4-linux-uic
sh4-linux-gcc              sh4-linux-moc               sh4-linux-unwrapped-gdb
sh4-linux-gcc-4.6.3        sh4-linux-nm                sh4sdistmclite
sh4-linux-gcov             sh4-linux-objcopy           st40load_gdb
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4/bin# cd ..
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4# ls
bin  etc      info  libexec  microprobe  share   target
doc  include  lib   man      sh4-linux   stdcmd  var
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4# cd ..
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit# ls
sh4  sources
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit# ls
sh4  sources
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit# cd ..
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4# ls
config  devkit  host
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4# cd host
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/host# ls
bin  doc  etc  include  info  lib  man  share  stmc  tests  usr  var
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/host# cd ..
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4# ls
config  devkit  host
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4# cd devkit
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit# ls
sh4  sources
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit# cd sh4
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4# ls
bin  etc      info  libexec  microprobe  share   target
doc  include  lib   man      sh4-linux   stdcmd  var
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4# cd target
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4/target# ls
bin   dev  home  misc  opt   root  sys  usr
boot  etc  lib   mnt   proc  sbin  tmp  var
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4/target# cd ..
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit/sh4# cd ..
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4/devkit# cd ..
root@Ubuntu32:/home/zhangbin/STM/STLinux-2.4# cd ..
root@Ubuntu32:/home/zhangbin/STM# ls
Backup                          setSTM2.4ToolsChain.sh   Untitled Document~
linux-sh4-2.6.32.59_stm24_V6.0  setSTM2.4ToolsChain.sh~
SDK36.2_SSDK36_PR_RC1           STLinux-2.4
root@Ubuntu32:/home/zhangbin/STM# source setSTM2.4ToolsChain.sh
root@Ubuntu32:/home/zhangbin/STM# cd SDK1
bash: cd: SDK1: No such file or directory
root@Ubuntu32:/home/zhangbin/STM# cd SDK36.2_SSDK36_PR_RC1/
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1# LS
The program 'LS' is currently not installed.  You can install it by typing:
apt-get install sl
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1# ls
apilib  docs         mysetenv.sh~  plugin_patch_parveen  stdebug  stmediaplayer
bin     mysetenv.sh  opensource    stapp                 stdrm
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1# cd st
stapp/         stdebug/       stdrm/         stmediaplayer/ 
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1# cd stapp/
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1/stapp# ls
atapi      log.log                                  SECURE_SDK_PR-REL_36_RC1
audio      macros_tests.ttm                         smart
blast      macros.ttm                               spi
blit       main                                     stapp.dir
cc         main_sdk7105_7105_ST40_LINUX_32BITS.map  subt
clkrv      main_sdk7105_7105_ST40_LINUX_32BITS.out  sysini
crypt      makefile                                 tbx
demux      makefile_fixed                           tcpip
denc       makefileold                              trace
dma        mbx                                      ttx
event      moca                                     tuner
flash      pccrd                                    uart
gamloader  pcpd                                     usb
grafix     pios                                     vbi
gui        platform                                 vfs
hdmi       playrec                                  video
i2c        playrec_old                              vin
include    pod                                      vmix
inject     pwm                                      vout
keyscn     rm                                       vtg
layer      scart
libcurl.a  SDK36_plugin
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1/stapp# make
*********************
*** Makefile help ***
*********************
make                               : Display this help
make help                          : Display this help
make info                          : Display current configuration selected
make all                           : Compile STDEBUG - STAPP and link with stapi library
make apilib                        : Compile only APILIB directory
make apilib MODULE=stvid           : Compile a specific module into APILIB directory
make stapp                         : Compile only STAPP directory
make stdebug                       : Compile only STDEBUG directory
make mrproper                      : Clean all the tree for a all platforms
make purge_all                     : Clean all the tree for a specific platform
make purge                         : Clean only STAPP directory
make purge_apilib                  : Clean only APILIB directory
make purge_apilib MODULE=stvid     : Clean a specific module into APILIB directory
make purge_stdebug                 : Clean only STDEBUG directory
make run                           : Run the application without debug
make debug                         : Debug the application with standard gui debugger
make debug CONSOLE=1               : Debug the application with console debugger
make debug STWORKBENCH=1           : Debug the application with stworkbench gui debugger
make debug_flash                   : Start debug from flash
make rom                           : Generate ROM image of the application
make rom ZIP=1                     : Generate ROM zip image of the application
make blower                        : Compile the flash blower application
make run_blower                    : Run the flash blower application
make kernel                        : Compile the linux kernel without menu config
make kernel MENUCONFIG=1           : Compile the linux kernel with menu config from terminal
make kernel GCONFIG=1              : Compile the linux kernel with menu config from gtk
make multicom                      : Compile multicom linux modules
make purge_kernel                  : Clean only the linux kernel directory
make purge_multicom                : Clean only the multicom directory
make run_kernel                    : Run the linux kernel without debug
make run_kernel DETACH=1           : Run the linux kernel without debug and disconnect from target
make debug_kernel                  : Debug the linux kernel with standard gui debugger
make debug_kernel CONSOLE=1        : Debug the linux kernel with console debugger
make unify_stapi                   : Process STAPI drivers to generate a unique module
make purge_unify_stapi             : Clean only unique module files generated
make install                       : Copy apilib modules and main.out to /opt/STM/STLinux-2.4/devkit/sh4/target/root
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1/stapp# make kernel MENUCONFIG=1 
  HOSTCC  scripts/kconfig/lxdialog/yesno.o
  HOSTCC  scripts/kconfig/mconf.o
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/mconf
scripts/kconfig/mconf arch/sh/Kconfig
#
# configuration written to .config
#



*** End of Linux kernel configuration.
*** Execute 'make' to build the kernel or try 'make help'.




*********************************************************
  Patching kernel to switch to 32 bits
  Patching config base file of the kernel == 0x40000000
  Patching config size file of the kernel == 0x8000000
  Patching zero page offset of the kernel == 0x800000
*********************************************************


  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf -s arch/sh/Kconfig
  CHK     include/linux/version.h
make[2]: `include/asm-sh/machtypes.h' is up to date.
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-sh
  CC      kernel/bounds.s
  GEN     include/linux/bounds.h
  CC      arch/sh/kernel/asm-offsets.s
  GEN     include/asm/asm-offsets.h
  CALL    scripts/checksyscalls.sh
  CC      scripts/mod/empty.o
  HOSTCC  scripts/mod/mk_elfconfig
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/elflib.o
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/ksymhash.o
  HOSTCC  scripts/mod/ktablehash.o
  HOSTCC  scripts/mod/modpost.o
scripts/mod/modpost.c: In function ‘get_markers’:
scripts/mod/modpost.c:1360:12: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
scripts/mod/modpost.c: In function ‘add_marker’:
scripts/mod/modpost.c:1792:10: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
  HOSTCC  scripts/mod/sumversion.o
  HOSTLD  scripts/mod/modpost
  HOSTLD  scripts/mod/ksymhash
  HOSTCC  scripts/kallsyms
scripts/kallsyms.c: In function ‘read_symbol’:
scripts/kallsyms.c:112:9: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result [-Wunused-result]
  HOSTCC  scripts/conmakehash
  HOSTCC  scripts/bin2c
  CC      init/main.o
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  CC      init/do_mounts.o
  CC      init/do_mounts_rd.o
  CC      init/do_mounts_initrd.o
  LD      init/mounts.o
  CC      init/initramfs.o
  CC      init/calibrate.o
  LD      init/built-in.o
  HOSTCC  usr/gen_init_cpio
  GEN     usr/initramfs_data.cpio
  AS      usr/initramfs_data.o
  LD      usr/built-in.o
  AS      arch/sh/kernel/debugtraps.o
  CC      arch/sh/kernel/dumpstack.o
  CC      arch/sh/kernel/idle.o
  CC      arch/sh/kernel/io.o
  CC      arch/sh/kernel/io_generic.o
  CC      arch/sh/kernel/irq.o
  CC      arch/sh/kernel/machvec.o
  CC      arch/sh/kernel/nmi_debug.o
  CC      arch/sh/kernel/process_32.o
  CC      arch/sh/kernel/ptrace_32.o
  CC      arch/sh/kernel/setup.o
  CC      arch/sh/kernel/signal_32.o
  CC      arch/sh/kernel/sys_sh.o
  CC      arch/sh/kernel/sys_sh32.o
  AS      arch/sh/kernel/syscalls_32.o
  CC      arch/sh/kernel/time.o
  CC      arch/sh/kernel/topology.o
  CC      arch/sh/kernel/traps.o
  CC      arch/sh/kernel/traps_32.o
  CC      arch/sh/kernel/unwinder.o
  CC      arch/sh/kernel/cpu/irq/imask.o
  CC      arch/sh/kernel/cpu/irq/ilc3.o
  LD      arch/sh/kernel/cpu/irq/built-in.o
  CC      arch/sh/kernel/cpu/sh4/probe.o
  AS      arch/sh/kernel/cpu/sh4/entry.o
  LD      arch/sh/kernel/cpu/sh4/common.o
  CC      arch/sh/kernel/cpu/sh4/fpu.o
  CC      arch/sh/kernel/cpu/sh4/softfloat.o
  CC      arch/sh/kernel/cpu/sh4/setup-stx7111.o
  CC      arch/sh/kernel/cpu/sh4/clock-stx7111.o
  CC      arch/sh/kernel/cpu/sh4/stm-tmu.o
  CC      arch/sh/kernel/cpu/sh4/stm_suspend.o
  AS      arch/sh/kernel/cpu/sh4/stm_suspend-core.o
  CC      arch/sh/kernel/cpu/sh4/suspend-stx7111.o
  LD      arch/sh/kernel/cpu/sh4/built-in.o
  CC      arch/sh/kernel/cpu/init.o
  CC      arch/sh/kernel/cpu/clock.o
  LD      arch/sh/kernel/cpu/built-in.o
  CC      arch/sh/kernel/sh_ksyms_32.o
  CC      arch/sh/kernel/module.o
  LD      arch/sh/kernel/built-in.o
  AS      arch/sh/kernel/head_32.o
  CC      arch/sh/kernel/init_task.o
  LDS     arch/sh/kernel/vmlinux.lds
  CC      arch/sh/mm/cache.o
  CC      arch/sh/mm/init.o
  CC      arch/sh/mm/consistent.o
  CC      arch/sh/mm/mmap.o
  CC      arch/sh/mm/cache-sh4.o
  CC      arch/sh/mm/flush-sh4.o
  CC      arch/sh/mm/extable_32.o
  CC      arch/sh/mm/fault_32.o
  CC      arch/sh/mm/ioremap_32.o
  CC      arch/sh/mm/kmap.o
  CC      arch/sh/mm/tlbflush_32.o
  CC      arch/sh/mm/asids-debugfs.o
  CC      arch/sh/mm/cache-debugfs.o
  CC      arch/sh/mm/tlb-sh4.o
  CC      arch/sh/mm/pmb.o
  LD      arch/sh/mm/built-in.o
  CC      arch/sh/boards/mach-sat7111/setup.o
  LD      arch/sh/boards/mach-sat7111/built-in.o
  CC      kernel/sched.o
kernel/sched.c: In function ‘wake_up_new_task’:
kernel/sched.c:2767:6: warning: unused variable ‘cpu’ [-Wunused-variable]
kernel/sched.c: In function ‘update_sysctl’:
kernel/sched.c:7316:22: warning: comparison of distinct pointer types lacks a cast [enabled by default]
  CC      kernel/fork.o
  CC      kernel/exec_domain.o
  CC      kernel/panic.o
  CC      kernel/printk.o
  CC      kernel/cpu.o
  CC      kernel/exit.o
  CC      kernel/itimer.o
  CC      kernel/time.o
  CC      kernel/softirq.o
  CC      kernel/resource.o
  CC      kernel/sysctl.o
  CC      kernel/capability.o
  CC      kernel/ptrace.o
  CC      kernel/timer.o
  CC      kernel/user.o
  CC      kernel/signal.o
  CC      kernel/sys.o
  CC      kernel/kmod.o
  CC      kernel/workqueue.o
  CC      kernel/pid.o
  CC      kernel/rcupdate.o
  CC      kernel/extable.o
  CC      kernel/params.o
  CC      kernel/posix-timers.o
  CC      kernel/kthread.o
  CC      kernel/wait.o
  CC      kernel/kfifo.o
  CC      kernel/sys_ni.o
  CC      kernel/posix-cpu-timers.o
  CC      kernel/mutex.o
  CC      kernel/hrtimer.o
  CC      kernel/rwsem.o
  CC      kernel/nsproxy.o
  CC      kernel/srcu.o
  CC      kernel/semaphore.o
  CC      kernel/notifier.o
  CC      kernel/ksysfs.o
  CC      kernel/pm_qos_params.o
  CC      kernel/sched_clock.o
  CC      kernel/cred.o
  CC      kernel/async.o
  CC      kernel/groups.o
  CC      kernel/freezer.o
  CC      kernel/irq/handle.o
  CC      kernel/irq/manage.o
  CC      kernel/irq/spurious.o
  CC      kernel/irq/resend.o
  CC      kernel/irq/chip.o
  CC      kernel/irq/devres.o
  CC      kernel/irq/autoprobe.o
  CC      kernel/irq/proc.o
  CC      kernel/irq/pm.o
  LD      kernel/irq/built-in.o
  CC      kernel/power/main.o
  CC      kernel/power/console.o
  CC      kernel/power/process.o
  CC      kernel/power/suspend.o
  LD      kernel/power/built-in.o
  CC      kernel/time/timekeeping.o
  CC      kernel/time/ntp.o
  CC      kernel/time/clocksource.o
  CC      kernel/time/jiffies.o
  CC      kernel/time/timer_list.o
  CC      kernel/time/timecompare.o
  CC      kernel/time/timeconv.o
  CC      kernel/time/clockevents.o
  CC      kernel/time/tick-common.o
  LD      kernel/time/built-in.o
  CC      kernel/futex.o
  CC      kernel/rtmutex.o
  CC      kernel/up.o
  CC      kernel/uid16.o
  CC      kernel/module.o
In file included from kernel/module.c:40:0:
include/linux/vermagic.h:30:2: warning: multi-line comment [-Wcomment]
  CC      kernel/kallsyms.o
  GZIP    kernel/config_data.gz
  IKCFG   kernel/config_data.h
  CC      kernel/configs.o
  CC      kernel/rcutree.o
  CC      kernel/relay.o
  CC      kernel/utsname_sysctl.o
  LD      kernel/built-in.o
  CC      mm/bootmem.o
mm/bootmem.c: In function ‘mark_bootmem’:
mm/bootmem.c:322:1: warning: control reaches end of non-void function [-Wreturn-type]
  CC      mm/filemap.o
  CC      mm/mempool.o
  CC      mm/oom_kill.o
  CC      mm/fadvise.o
  CC      mm/maccess.o
  CC      mm/page_alloc.o
mm/page_alloc.c: In function ‘remove_active_range’:
mm/page_alloc.c:4076:21: warning: array subscript is above array bounds [-Warray-bounds]
mm/page_alloc.c:4078:21: warning: array subscript is above array bounds [-Warray-bounds]
  CC      mm/page-writeback.o
  CC      mm/readahead.o
  CC      mm/swap.o
  CC      mm/truncate.o
  CC      mm/vmscan.o
  CC      mm/shmem.o
  CC      mm/prio_tree.o
  CC      mm/util.o
  CC      mm/mmzone.o
  CC      mm/vmstat.o
  CC      mm/backing-dev.o
  CC      mm/page_isolation.o
  CC      mm/mm_init.o
  CC      mm/mmu_context.o
  CC      mm/fremap.o
  CC      mm/highmem.o
  CC      mm/madvise.o
  CC      mm/memory.o
  CC      mm/mincore.o
  CC      mm/mlock.o
  CC      mm/mmap.o
  CC      mm/mprotect.o
  CC      mm/mremap.o
  CC      mm/msync.o
  CC      mm/rmap.o
  CC      mm/vmalloc.o
  CC      mm/pagewalk.o
  CC      mm/init-mm.o
  CC      mm/page_io.o
  CC      mm/swap_state.o
  CC      mm/swapfile.o
  CC      mm/thrash.o
  CC      mm/dmapool.o
  CC      mm/slab.o
  CC      mm/quicklist.o
  CC      mm/bpa2.o
  LD      mm/built-in.o
  CC      fs/open.o
  CC      fs/read_write.o
  CC      fs/file_table.o
  CC      fs/super.o
  CC      fs/char_dev.o
  CC      fs/stat.o
  CC      fs/exec.o
  CC      fs/pipe.o
  CC      fs/namei.o
  CC      fs/fcntl.o
  CC      fs/ioctl.o
  CC      fs/readdir.o
  CC      fs/select.o
  CC      fs/fifo.o
  CC      fs/dcache.o
fs/dcache.c: In function ‘d_materialise_unique’:
fs/dcache.c:1872:1: warning: control reaches end of non-void function [-Wreturn-type]
  CC      fs/inode.o
  CC      fs/attr.o
  CC      fs/bad_inode.o
  CC      fs/file.o
  CC      fs/filesystems.o
  CC      fs/namespace.o
  CC      fs/seq_file.o
  CC      fs/xattr.o
  CC      fs/libfs.o
  CC      fs/fs-writeback.o
  CC      fs/pnode.o
  CC      fs/drop_caches.o
  CC      fs/splice.o
  CC      fs/sync.o
  CC      fs/utimes.o
  CC      fs/stack.o
  CC      fs/fs_struct.o
  CC      fs/buffer.o
  CC      fs/bio.o
  CC      fs/block_dev.o
  CC      fs/direct-io.o
  CC      fs/mpage.o
  CC      fs/ioprio.o
  CC      fs/cramfs/inode.o
  CC      fs/cramfs/uncompress.o
  LD      fs/cramfs/cramfs.o
  LD      fs/cramfs/built-in.o
  CC      fs/debugfs/inode.o
  CC      fs/debugfs/file.o
  LD      fs/debugfs/debugfs.o
  LD      fs/debugfs/built-in.o
  CC      fs/devpts/inode.o
  LD      fs/devpts/devpts.o
  LD      fs/devpts/built-in.o
  CC      fs/ext2/balloc.o
  CC      fs/ext2/dir.o
  CC      fs/ext2/file.o
  CC      fs/ext2/ialloc.o
  CC      fs/ext2/inode.o
  CC      fs/ext2/ioctl.o
  CC      fs/ext2/namei.o
  CC      fs/ext2/super.o
  CC      fs/ext2/symlink.o
  CC      fs/ext2/xattr.o
  CC      fs/ext2/xattr_user.o
  CC      fs/ext2/xattr_trusted.o
  LD      fs/ext2/ext2.o
  LD      fs/ext2/built-in.o
  CC      fs/ext3/balloc.o
  CC      fs/ext3/bitmap.o
  CC      fs/ext3/dir.o
  CC      fs/ext3/file.o
  CC      fs/ext3/fsync.o
  CC      fs/ext3/ialloc.o
  CC      fs/ext3/inode.o
  CC      fs/ext3/ioctl.o
  CC      fs/ext3/namei.o
  CC      fs/ext3/super.o
  CC      fs/ext3/symlink.o
  CC      fs/ext3/hash.o
  CC      fs/ext3/resize.o
  CC      fs/ext3/ext3_jbd.o
  CC      fs/ext3/xattr.o
  CC      fs/ext3/xattr_user.o
  CC      fs/ext3/xattr_trusted.o
  LD      fs/ext3/ext3.o
  LD      fs/ext3/built-in.o
  CC      fs/fat/cache.o
  CC      fs/fat/dir.o
  CC      fs/fat/fatent.o
  CC      fs/fat/file.o
  CC      fs/fat/inode.o
  CC      fs/fat/misc.o
  CC      fs/fat/namei_msdos.o
  CC      fs/fat/namei_vfat.o
  LD      fs/fat/fat.o
  LD      fs/fat/vfat.o
  LD      fs/fat/msdos.o
  LD      fs/fat/built-in.o
  CC      fs/isofs/namei.o
  CC      fs/isofs/inode.o
  CC      fs/isofs/dir.o
  CC      fs/isofs/util.o
  CC      fs/isofs/rock.o
  CC      fs/isofs/export.o
  CC      fs/isofs/joliet.o
  LD      fs/isofs/isofs.o
  LD      fs/isofs/built-in.o
  CC      fs/jbd/transaction.o
  CC      fs/jbd/commit.o
  CC      fs/jbd/recovery.o
  CC      fs/jbd/checkpoint.o
  CC      fs/jbd/revoke.o
  CC      fs/jbd/journal.o
  LD      fs/jbd/jbd.o
  LD      fs/jbd/built-in.o
  CC      fs/jffs2/compr.o
  CC      fs/jffs2/dir.o
  CC      fs/jffs2/file.o
  CC      fs/jffs2/ioctl.o
  CC      fs/jffs2/nodelist.o
  CC      fs/jffs2/malloc.o
  CC      fs/jffs2/read.o
  CC      fs/jffs2/nodemgmt.o
  CC      fs/jffs2/readinode.o
  CC      fs/jffs2/write.o
  CC      fs/jffs2/scan.o
  CC      fs/jffs2/gc.o
  CC      fs/jffs2/symlink.o
  CC      fs/jffs2/build.o
  CC      fs/jffs2/erase.o
  CC      fs/jffs2/background.o
  CC      fs/jffs2/fs.o
  CC      fs/jffs2/writev.o
  CC      fs/jffs2/super.o
  CC      fs/jffs2/debug.o
  CC      fs/jffs2/wbuf.o
  CC      fs/jffs2/compr_rtime.o
  CC      fs/jffs2/compr_zlib.o
  LD      fs/jffs2/jffs2.o
  LD      fs/jffs2/built-in.o
  CC      fs/jfs/super.o
fs/jfs/super.c: In function ‘jfs_fill_super’:
fs/jfs/super.c:527:19: warning: comparison of distinct pointer types lacks a cast [enabled by default]
  CC      fs/jfs/file.o
  CC      fs/jfs/inode.o
  CC      fs/jfs/namei.o
  CC      fs/jfs/jfs_mount.o
  CC      fs/jfs/jfs_umount.o
  CC      fs/jfs/jfs_xtree.o
  CC      fs/jfs/jfs_imap.o
  CC      fs/jfs/jfs_debug.o
  CC      fs/jfs/jfs_dmap.o
  CC      fs/jfs/jfs_unicode.o
  CC      fs/jfs/jfs_dtree.o
  CC      fs/jfs/jfs_inode.o
  CC      fs/jfs/jfs_extent.o
  CC      fs/jfs/symlink.o
  CC      fs/jfs/jfs_metapage.o
  CC      fs/jfs/jfs_logmgr.o
  CC      fs/jfs/jfs_txnmgr.o
  CC      fs/jfs/jfs_uniupr.o
  CC      fs/jfs/resize.o
  CC      fs/jfs/xattr.o
  CC      fs/jfs/ioctl.o
  LD      fs/jfs/jfs.o
  LD      fs/jfs/built-in.o
  CC      fs/lockd/clntlock.o
  CC      fs/lockd/clntproc.o
  CC      fs/lockd/host.o
  CC      fs/lockd/svc.o
  CC      fs/lockd/svclock.o
  CC      fs/lockd/svcshare.o
  CC      fs/lockd/svcproc.o
  CC      fs/lockd/svcsubs.o
  CC      fs/lockd/mon.o
  CC      fs/lockd/xdr.o
  CC      fs/lockd/grace.o
  CC      fs/lockd/xdr4.o
  CC      fs/lockd/svc4proc.o
  LD      fs/lockd/lockd.o
  LD      fs/lockd/built-in.o
  CC      fs/nfs/client.o
  CC      fs/nfs/dir.o
  CC      fs/nfs/file.o
  CC      fs/nfs/getroot.o
  CC      fs/nfs/inode.o
  CC      fs/nfs/super.o
  CC      fs/nfs/nfs2xdr.o
  CC      fs/nfs/direct.o
  CC      fs/nfs/pagelist.o
  CC      fs/nfs/proc.o
  CC      fs/nfs/read.o
  CC      fs/nfs/symlink.o
  CC      fs/nfs/unlink.o
  CC      fs/nfs/write.o
  CC      fs/nfs/namespace.o
  CC      fs/nfs/mount_clnt.o
  CC      fs/nfs/dns_resolve.o
  CC      fs/nfs/cache_lib.o
  CC      fs/nfs/nfsroot.o
  CC      fs/nfs/nfs3proc.o
  CC      fs/nfs/nfs3xdr.o
  CC      fs/nfs/sysctl.o
  LD      fs/nfs/nfs.o
  LD      fs/nfs/built-in.o
  CC      fs/nls/nls_base.o
  CC      fs/nls/nls_cp437.o
  CC      fs/nls/nls_iso8859-1.o
  LD      fs/nls/built-in.o
  CC      fs/notify/fsnotify.o
  CC      fs/notify/notification.o
  CC      fs/notify/group.o
  CC      fs/notify/inode_mark.o
  CC      fs/notify/dnotify/dnotify.o
  LD      fs/notify/dnotify/built-in.o
  CC      fs/notify/inotify/inotify.o
  CC      fs/notify/inotify/inotify_fsnotify.o
  CC      fs/notify/inotify/inotify_user.o
  LD      fs/notify/inotify/built-in.o
  LD      fs/notify/built-in.o
  CC      fs/ntfs/aops.o
  CC      fs/ntfs/attrib.o
  CC      fs/ntfs/collate.o
  CC      fs/ntfs/compress.o
  CC      fs/ntfs/debug.o
  CC      fs/ntfs/dir.o
  CC      fs/ntfs/file.o
  CC      fs/ntfs/index.o
  CC      fs/ntfs/inode.o
  CC      fs/ntfs/mft.o
  CC      fs/ntfs/mst.o
  CC      fs/ntfs/namei.o
  CC      fs/ntfs/runlist.o
  CC      fs/ntfs/super.o
  CC      fs/ntfs/sysctl.o
  CC      fs/ntfs/unistr.o
  CC      fs/ntfs/upcase.o
  LD      fs/ntfs/ntfs.o
  LD      fs/ntfs/built-in.o
  CC      fs/partitions/check.o
  CC      fs/partitions/msdos.o
  LD      fs/partitions/built-in.o
  CC      fs/proc/mmu.o
  CC      fs/proc/task_mmu.o
  CC      fs/proc/inode.o
  CC      fs/proc/root.o
  CC      fs/proc/base.o
  CC      fs/proc/generic.o
  CC      fs/proc/array.o
  CC      fs/proc/proc_tty.o
  CC      fs/proc/cmdline.o
  CC      fs/proc/cpuinfo.o
  CC      fs/proc/devices.o
  CC      fs/proc/interrupts.o
  CC      fs/proc/loadavg.o
  CC      fs/proc/meminfo.o
  CC      fs/proc/stat.o
  CC      fs/proc/uptime.o
  CC      fs/proc/version.o
  CC      fs/proc/softirqs.o
  CC      fs/proc/proc_sysctl.o
  CC      fs/proc/proc_net.o
  CC      fs/proc/kcore.o
  CC      fs/proc/kmsg.o
  CC      fs/proc/page.o
  LD      fs/proc/proc.o
  LD      fs/proc/built-in.o
  CC      fs/ramfs/inode.o
  CC      fs/ramfs/file-mmu.o
  LD      fs/ramfs/ramfs.o
  LD      fs/ramfs/built-in.o
  CC      fs/reiserfs/bitmap.o
  CC      fs/reiserfs/do_balan.o
  CC      fs/reiserfs/namei.o
  CC      fs/reiserfs/inode.o
  CC      fs/reiserfs/file.o
  CC      fs/reiserfs/dir.o
  CC      fs/reiserfs/fix_node.o
  CC      fs/reiserfs/super.o
  CC      fs/reiserfs/prints.o
  CC      fs/reiserfs/objectid.o
  CC      fs/reiserfs/lbalance.o
  CC      fs/reiserfs/ibalance.o
  CC      fs/reiserfs/stree.o
  CC      fs/reiserfs/hashes.o
  CC      fs/reiserfs/tail_conversion.o
  CC      fs/reiserfs/journal.o
  CC      fs/reiserfs/resize.o
  CC      fs/reiserfs/item_ops.o
  CC      fs/reiserfs/ioctl.o
  CC      fs/reiserfs/procfs.o
  CC      fs/reiserfs/xattr.o
  LD      fs/reiserfs/reiserfs.o
  LD      fs/reiserfs/built-in.o
  CC      fs/romfs/storage.o
  CC      fs/romfs/super.o
  LD      fs/romfs/romfs.o
  LD      fs/romfs/built-in.o
  CC      fs/sysfs/inode.o
  CC      fs/sysfs/file.o
  CC      fs/sysfs/dir.o
  CC      fs/sysfs/symlink.o
  CC      fs/sysfs/mount.o
  CC      fs/sysfs/bin.o
  CC      fs/sysfs/group.o
  LD      fs/sysfs/built-in.o
  CC      fs/udf/balloc.o
  CC      fs/udf/dir.o
  CC      fs/udf/file.o
  CC      fs/udf/ialloc.o
  CC      fs/udf/inode.o
  CC      fs/udf/lowlevel.o
  CC      fs/udf/namei.o
  CC      fs/udf/partition.o
  CC      fs/udf/super.o
  CC      fs/udf/truncate.o
fs/udf/truncate.c: In function ‘udf_truncate_tail_extent’:
fs/udf/truncate.c:108:16: warning: ‘adsize’ may be used uninitialized in this function [-Wuninitialized]
fs/udf/truncate.c: In function ‘udf_truncate_extents’:
fs/udf/truncate.c:300:17: warning: ‘adsize’ may be used uninitialized in this function [-Wuninitialized]
  CC      fs/udf/symlink.o
  CC      fs/udf/directory.o
  CC      fs/udf/misc.o
  CC      fs/udf/udftime.o
  CC      fs/udf/unicode.o
  LD      fs/udf/udf.o
  LD      fs/udf/built-in.o
  CC      fs/eventpoll.o
  CC      fs/anon_inodes.o
  CC      fs/signalfd.o
  CC      fs/timerfd.o
  CC      fs/eventfd.o
  CC      fs/aio.o
  CC      fs/locks.o
  CC      fs/binfmt_script.o
  CC      fs/binfmt_elf.o
  CC      fs/mbcache.o
  LD      fs/built-in.o
  CC      ipc/util.o
  CC      ipc/msgutil.o
  CC      ipc/msg.o
  CC      ipc/sem.o
  CC      ipc/shm.o
  CC      ipc/ipcns_notifier.o
  CC      ipc/ipc_sysctl.o
  LD      ipc/built-in.o
  CC      security/commoncap.o
  CC      security/min_addr.o
  LD      security/built-in.o
  CC      crypto/api.o
  CC      crypto/cipher.o
  CC      crypto/compress.o
  CC      crypto/algapi.o
  CC      crypto/scatterwalk.o
  CC      crypto/proc.o
  CC      crypto/ablkcipher.o
  CC      crypto/blkcipher.o
  CC      crypto/ahash.o
  CC      crypto/shash.o
  CC      crypto/algboss.o
  CC      crypto/testmgr.o
crypto/testmgr.c: In function ‘alg_test_cprng’:
crypto/testmgr.c:1204:6: warning: ‘err’ may be used uninitialized in this function [-Wuninitialized]
  LD      crypto/crypto.o
  CC      crypto/crypto_wq.o
  LD      crypto/crypto_algapi.o
  CC      crypto/aead.o
  LD      crypto/crypto_blkcipher.o
  CC      crypto/chainiv.o
  CC      crypto/eseqiv.o
  LD      crypto/crypto_hash.o
  CC      crypto/pcompress.o
  LD      crypto/cryptomgr.o
  CC      crypto/md5.o
  CC      crypto/ecb.o
  CC      crypto/aes_generic.o
  CC      crypto/arc4.o
  CC      crypto/michael_mic.o
  CC      crypto/crc32c.o
  CC      crypto/rng.o
  CC      crypto/krng.o
  LD      crypto/built-in.o
  CC [M]  crypto/cbc.o
  CC [M]  crypto/pcbc.o
  CC [M]  crypto/ansi_cprng.o
  CC      block/elevator.o
  CC      block/blk-core.o
  CC      block/blk-tag.o
  CC      block/blk-sysfs.o
  CC      block/blk-barrier.o
  CC      block/blk-settings.o
  CC      block/blk-ioc.o
  CC      block/blk-map.o
  CC      block/blk-exec.o
  CC      block/blk-merge.o
  CC      block/blk-softirq.o
  CC      block/blk-timeout.o
  CC      block/blk-iopoll.o
  CC      block/ioctl.o
  CC      block/genhd.o
  CC      block/scsi_ioctl.o
  CC      block/noop-iosched.o
  CC      block/as-iosched.o
  CC      block/deadline-iosched.o
  CC      block/cfq-iosched.o
block/cfq-iosched.c: In function ‘cfq_async_queue_prio’:
block/cfq-iosched.c:1856:1: warning: control reaches end of non-void function [-Wreturn-type]
  LD      block/built-in.o
  CC      drivers/base/core.o
  CC      drivers/base/sys.o
  CC      drivers/base/bus.o
  CC      drivers/base/dd.o
  CC      drivers/base/driver.o
  CC      drivers/base/class.o
  CC      drivers/base/platform.o
  CC      drivers/base/cpu.o
  CC      drivers/base/firmware.o
  CC      drivers/base/init.o
  CC      drivers/base/map.o
  CC      drivers/base/devres.o
  CC      drivers/base/attribute_container.o
  CC      drivers/base/transport_class.o
  CC      drivers/base/power/sysfs.o
  CC      drivers/base/power/generic_ops.o
  CC      drivers/base/power/main.o
  CC      drivers/base/power/runtime.o
  LD      drivers/base/power/built-in.o
  CC      drivers/base/dma-mapping.o
  CC      drivers/base/dma-coherent.o
  CC      drivers/base/firmware_class.o
  CC      drivers/base/module.o
  LD      drivers/base/built-in.o
  CC      drivers/block/brd.o
  LD      drivers/block/built-in.o
  CC      drivers/cdrom/cdrom.o
  LD      drivers/cdrom/built-in.o
  CC      drivers/char/mem.o
  CC      drivers/char/random.o
  CC      drivers/char/tty_io.o
  CC      drivers/char/n_tty.o
  CC      drivers/char/tty_ioctl.o
  CC      drivers/char/tty_ldisc.o
  CC      drivers/char/tty_buffer.o
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string’:
drivers/char/tty_buffer.c:250:14: warning: comparison of distinct pointer types lacks a cast [enabled by default]
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’:
drivers/char/tty_buffer.c:287:14: warning: comparison of distinct pointer types lacks a cast [enabled by default]
  CC      drivers/char/tty_port.o
  CC      drivers/char/pty.o
  CC      drivers/char/misc.o
  CC      drivers/char/vt_ioctl.o
  CC      drivers/char/vc_screen.o
  CC      drivers/char/selection.o
  CC      drivers/char/keyboard.o
  CC      drivers/char/consolemap.o
  CC      drivers/char/consolemap_deftbl.o
  CC      drivers/char/vt.o
  CC      drivers/char/defkeymap.o
  CC      drivers/char/hw_random/core.o
  LD      drivers/char/hw_random/rng-core.o
  LD      drivers/char/hw_random/built-in.o
  LD      drivers/char/built-in.o
  CC      drivers/clk/clkdev.o
  LD      drivers/clk/built-in.o
  CC      drivers/clocksource/sh_tmu.o
  LD      drivers/clocksource/built-in.o
  CC      drivers/gpio/gpiolib.o
  LD      drivers/gpio/built-in.o
  CC      drivers/hid/hid-core.o
  CC      drivers/hid/hid-input.o
  CC      drivers/hid/hid-debug.o
  LD      drivers/hid/hid.o
  CC      drivers/hid/usbhid/hid-core.o
  CC      drivers/hid/usbhid/hid-quirks.o
  LD      drivers/hid/usbhid/usbhid.o
  LD      drivers/hid/usbhid/built-in.o
  LD      drivers/hid/built-in.o
  CC      drivers/hwmon/hwmon.o
  CC      drivers/hwmon/stm-temp.o
  LD      drivers/hwmon/built-in.o
  CC      drivers/i2c/i2c-boardinfo.o
  CC      drivers/i2c/i2c-core.o
  CC      drivers/i2c/i2c-dev.o
  CC      drivers/i2c/busses/i2c-stm.o
  LD      drivers/i2c/busses/built-in.o
  LD      drivers/i2c/built-in.o
  CC      drivers/input/input.o
  CC      drivers/input/input-compat.o
  CC      drivers/input/ff-core.o
  LD      drivers/input/input-core.o
  CC      drivers/input/mousedev.o
  LD      drivers/input/built-in.o
  CC      drivers/input/serio/serio.o
  CC      drivers/input/serio/serport.o
  LD      drivers/input/serio/built-in.o
  CC      drivers/leds/led-core.o
  CC      drivers/leds/led-class.o
  CC      drivers/leds/led-triggers.o
  CC      drivers/leds/leds-gpio.o
  CC      drivers/leds/ledtrig-heartbeat.o
  LD      drivers/leds/built-in.o
  CC      drivers/mtd/mtdcore.o
  CC      drivers/mtd/mtdsuper.o
  CC      drivers/mtd/mtdbdi.o
  CC      drivers/mtd/mtdpart.o
drivers/mtd/mtdpart.c: In function ‘part_read’:
drivers/mtd/mtdpart.c:76:11: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
  LD      drivers/mtd/mtd.o
  CC      drivers/mtd/cmdlinepart.o
  CC      drivers/mtd/mtdchar.o
  CC      drivers/mtd/mtd_blkdevs.o
  CC      drivers/mtd/mtdblock.o
  CC      drivers/mtd/chips/chipreg.o
  CC      drivers/mtd/chips/cfi_util.o
drivers/mtd/chips/cfi_util.c: In function ‘cfi_qry_present’:
include/linux/mtd/map.h:258:6: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
include/linux/mtd/map.h:258:6: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_util.c:43:3: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
drivers/mtd/chips/cfi_util.c: In function ‘cfi_read_pri’:
include/linux/mtd/cfi.h:472:3: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
  CC      drivers/mtd/chips/cfi_cmdset_0001.o
drivers/mtd/chips/cfi_cmdset_0001.c: In function ‘do_getlockstatus_oneblock’:
include/linux/mtd/cfi.h:472:3: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c: In function ‘chip_ready’:
include/linux/mtd/map.h:270:22: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
include/linux/mtd/map.h:270:22: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c: In function ‘inval_cache_and_wait_for_operation’:
include/linux/mtd/map.h:270:22: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c: In function ‘do_erase_oneblock’:
include/linux/mtd/map.h:304:17: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c: In function ‘cfi_intelext_writev’:
include/linux/mtd/map.h:304:17: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c:1701:9: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c:1701:9: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
include/linux/mtd/map.h:304:17: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c: In function ‘do_write_oneword.constprop.14’:
include/linux/mtd/map.h:304:17: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/cfi_cmdset_0001.c: In function ‘cfi_intelext_write_words’:
include/linux/mtd/map.h:312:11: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
  CC      drivers/mtd/chips/gen_probe.o
  CC      drivers/mtd/chips/jedec_probe.o
drivers/mtd/chips/jedec_probe.c: In function ‘jedec_probe_chip’:
drivers/mtd/chips/jedec_probe.c:1894:2: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1881:24: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1894:2: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1881:24: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1894:2: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1881:24: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1894:2: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1881:24: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1894:2: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1881:24: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1894:2: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
drivers/mtd/chips/jedec_probe.c:1881:24: warning: ‘r.x[0]’ may be used uninitialized in this function [-Wuninitialized]
include/linux/mtd/map.h:375:11: note: ‘r.x[0]’ was declared here
  LD      drivers/mtd/chips/built-in.o
  CC      drivers/mtd/maps/physmap.o
  LD      drivers/mtd/maps/built-in.o
  CC      drivers/mtd/nand/nand_base.o
drivers/mtd/nand/nand_base.c:483:12: warning: ‘nand_get_features’ defined but not used [-Wunused-function]
  CC      drivers/mtd/nand/nand_bbt.o
  LD      drivers/mtd/nand/nand.o
  CC      drivers/mtd/nand/nand_ecc.o
  CC      drivers/mtd/nand/nand_ids.o
  CC      drivers/mtd/nand/plat_nand.o
  LD      drivers/mtd/nand/built-in.o
  LD      drivers/mtd/built-in.o
  CC      drivers/net/mii.o
  CC      drivers/net/phy/phy.o
  CC      drivers/net/phy/phy_device.o
  CC      drivers/net/phy/mdio_bus.o
  LD      drivers/net/phy/libphy.o
  LD      drivers/net/phy/built-in.o
  CC      drivers/net/stmmac/stmmac_main.o
  CC      drivers/net/stmmac/stmmac_ethtool.o
  CC      drivers/net/stmmac/stmmac_mdio.o
  CC      drivers/net/stmmac/dwmac_lib.o
  CC      drivers/net/stmmac/dwmac1000_core.o
  CC      drivers/net/stmmac/dwmac1000_dma.o
  CC      drivers/net/stmmac/dwmac100_core.o
  CC      drivers/net/stmmac/dwmac100_dma.o
  CC      drivers/net/stmmac/enh_desc.o
  CC      drivers/net/stmmac/norm_desc.o
  CC      drivers/net/stmmac/mmc_core.o
  CC      drivers/net/stmmac/stmmac_timer.o
  CC      drivers/net/stmmac/ring_mode.o
  CC      drivers/net/stmmac/stmmac_platform.o
  LD      drivers/net/stmmac/stmmac.o
  LD      drivers/net/stmmac/built-in.o
  CC      drivers/net/usb/pegasus.o
drivers/net/usb/pegasus.c: In function ‘enable_eprom_write’:
drivers/net/usb/pegasus.c:441:6: warning: unused variable ‘ret’ [-Wunused-variable]
drivers/net/usb/pegasus.c: In function ‘disable_eprom_write’:
drivers/net/usb/pegasus.c:450:6: warning: unused variable ‘ret’ [-Wunused-variable]
  CC      drivers/net/usb/asix.o
  CC      drivers/net/usb/cdc_ether.o
  CC      drivers/net/usb/net1080.o
  CC      drivers/net/usb/zaurus.o
  CC      drivers/net/usb/usbnet.o
  LD      drivers/net/usb/built-in.o
  CC      drivers/net/wireless/hostap/hostap_80211_rx.o
  CC      drivers/net/wireless/hostap/hostap_80211_tx.o
  CC      drivers/net/wireless/hostap/hostap_ap.o
  CC      drivers/net/wireless/hostap/hostap_info.o
  CC      drivers/net/wireless/hostap/hostap_ioctl.o
  CC      drivers/net/wireless/hostap/hostap_main.o
  CC      drivers/net/wireless/hostap/hostap_proc.o
  LD      drivers/net/wireless/hostap/hostap.o
  LD      drivers/net/wireless/hostap/built-in.o
  CC      drivers/net/wireless/libertas/main.o
  CC      drivers/net/wireless/libertas/wext.o
  CC      drivers/net/wireless/libertas/rx.o
  CC      drivers/net/wireless/libertas/tx.o
  CC      drivers/net/wireless/libertas/cmd.o
  CC      drivers/net/wireless/libertas/cmdresp.o
  CC      drivers/net/wireless/libertas/scan.o
  CC      drivers/net/wireless/libertas/11d.o
  CC      drivers/net/wireless/libertas/debugfs.o
  CC      drivers/net/wireless/libertas/persistcfg.o
  CC      drivers/net/wireless/libertas/ethtool.o
  CC      drivers/net/wireless/libertas/assoc.o
  CC      drivers/net/wireless/libertas/if_usb.o
  LD      drivers/net/wireless/libertas/libertas.o
  LD      drivers/net/wireless/libertas/usb8xxx.o
  LD      drivers/net/wireless/libertas/built-in.o
  CC      drivers/net/wireless/zd1201.o
  LD      drivers/net/wireless/built-in.o
  CC      drivers/net/Space.o
  CC      drivers/net/loopback.o
  CC      drivers/net/nwhwconfig.o
  LD      drivers/net/built-in.o
  CC      drivers/rtc/rtc-lib.o
  CC      drivers/rtc/hctosys.o
  CC      drivers/rtc/class.o
  CC      drivers/rtc/interface.o
  CC      drivers/rtc/rtc-dev.o
  CC      drivers/rtc/rtc-proc.o
  CC      drivers/rtc/rtc-sysfs.o
  LD      drivers/rtc/rtc-core.o
  LD      drivers/rtc/built-in.o
  CC      drivers/scsi/scsi.o
  CC      drivers/scsi/hosts.o
  CC      drivers/scsi/scsi_ioctl.o
  CC      drivers/scsi/constants.o
  CC      drivers/scsi/scsicam.o
  CC      drivers/scsi/scsi_error.o
  CC      drivers/scsi/scsi_lib.o
  CC      drivers/scsi/scsi_lib_dma.o
  CC      drivers/scsi/scsi_scan.o
  CC      drivers/scsi/scsi_sysfs.o
  CC      drivers/scsi/scsi_devinfo.o
  CC      drivers/scsi/scsi_sysctl.o
  CC      drivers/scsi/sd.o
  CC      drivers/scsi/sr.o
  CC      drivers/scsi/sr_ioctl.o
  CC      drivers/scsi/sr_vendor.o
  LD      drivers/scsi/scsi_mod.o
  LD      drivers/scsi/sd_mod.o
  LD      drivers/scsi/sr_mod.o
  CC      drivers/scsi/sg.o
  LD      drivers/scsi/built-in.o
  CC [M]  drivers/scsi/scsi_wait_scan.o
  CC      drivers/serial/serial_core.o
  CC      drivers/serial/stm-asc.o
drivers/serial/stm-asc.c: In function ‘asc_console_write’:
drivers/serial/stm-asc.c:938:16: warning: unused variable ‘intenable’ [-Wunused-variable]
  LD      drivers/serial/built-in.o
  CC      drivers/sh/intc.o
  LD      drivers/sh/built-in.o
  CC      drivers/stm/emi.o
  CC      drivers/stm/gpio.o
drivers/stm/gpio.c:34:0: warning: "CONFIG_STPIO" redefined [enabled by default]
include/linux/autoconf.h:278:0: note: this is the location of the previous definition
  CC      drivers/stm/pad.o
  CC      drivers/stm/sysconf.o
  CC      drivers/stm/device.o
  CC      drivers/stm/clk.o
  CC      drivers/stm/clocks/clock-common.o
drivers/stm/clocks/clock-common.c:123:21: warning: ‘most_significant_set_bit’ defined but not used [-Wunused-function]
  CC      drivers/stm/clocks/clock-stx7111.o
  LD      drivers/stm/clocks/built-in.o
  CC      drivers/stm/copro-st_socs.o
  CC      drivers/stm/stm-coprocessor.o
  CC      drivers/stm/rng.o
  CC      drivers/stm/wakeup_devices.o
  CC      drivers/stm/pm_notify.o
  CC      drivers/stm/pm_sys.o
  CC      drivers/stm/pms.o
drivers/stm/pms.c: In function ‘pms_control_store’:
drivers/stm/pms.c:1085:23: warning: unused variable ‘obj’ [-Wunused-variable]
  CC      drivers/stm/pm_runtime.o
  CC      drivers/stm/lpc.o
drivers/stm/lpc.c: In function ‘stm_lpc_probe’:
drivers/stm/lpc.c:132:17: warning: assignment makes integer from pointer without a cast [enabled by default]
drivers/stm/lpc.c: In function ‘stm_lpc_suspend’:
drivers/stm/lpc.c:189:27: warning: unused variable ‘pdata’ [-Wunused-variable]
  CC      drivers/stm/stx7111.o
  CC      drivers/stm/stx7111_clock.o
  CC      drivers/stm/stx7111_audio.o
  CC      drivers/stm/stx7111_comms.o
  CC      drivers/stm/stx7111_hispeed.o
  CC      drivers/stm/stx7111_pci.o
drivers/stm/stx7111_pci.c: In function ‘stx7111_configure_pci’:
drivers/stm/stx7111_pci.c:115:2: warning: #warning TODO: PCI Power Management [-Wcpp]
  LD      drivers/stm/built-in.o
  CC      drivers/thermal/thermal_sys.o
  LD      drivers/thermal/built-in.o
  CC      drivers/usb/core/usb.o
  CC      drivers/usb/core/hub.o
  CC      drivers/usb/core/hcd.o
  CC      drivers/usb/core/urb.o
  CC      drivers/usb/core/message.o
  CC      drivers/usb/core/driver.o
  CC      drivers/usb/core/config.o
  CC      drivers/usb/core/file.o
  CC      drivers/usb/core/buffer.o
  CC      drivers/usb/core/sysfs.o
  CC      drivers/usb/core/endpoint.o
  CC      drivers/usb/core/devio.o
  CC      drivers/usb/core/notify.o
  CC      drivers/usb/core/generic.o
  CC      drivers/usb/core/quirks.o
  CC      drivers/usb/core/devices.o
  CC      drivers/usb/core/inode.o
  LD      drivers/usb/core/usbcore.o
  LD      drivers/usb/core/built-in.o
  CC      drivers/usb/host/ehci-hcd.o
  CC      drivers/usb/host/ohci-hcd.o
drivers/usb/host/ohci-hub.c:318:13: warning: ‘ohci_finish_controller_resume’ defined but not used [-Wunused-function]
  CC      drivers/usb/host/hcd-stm.o
  LD      drivers/usb/host/built-in.o
  CC      drivers/usb/mon/mon_main.o
  CC      drivers/usb/mon/mon_stat.o
  CC      drivers/usb/mon/mon_text.o
  CC      drivers/usb/mon/mon_bin.o
  LD      drivers/usb/mon/usbmon.o
  LD      drivers/usb/mon/built-in.o
  CC      drivers/usb/storage/scsiglue.o
  CC      drivers/usb/storage/protocol.o
  CC      drivers/usb/storage/transport.o
  CC      drivers/usb/storage/usb.o
  CC      drivers/usb/storage/initializers.o
  CC      drivers/usb/storage/sierra_ms.o
  CC      drivers/usb/storage/option_ms.o
  CC      drivers/usb/storage/usual-tables.o
  LD      drivers/usb/storage/usb-storage.o
  LD      drivers/usb/storage/built-in.o
  LD      drivers/usb/built-in.o
  CC      drivers/video/fb_notify.o
  CC      drivers/video/fbmem.o
drivers/video/fbmem.c: In function ‘fb_set_var’:
drivers/video/fbmem.c:960:8: warning: unused variable ‘err’ [-Wunused-variable]
drivers/video/fbmem.c:959:29: warning: unused variable ‘oldvar’ [-Wunused-variable]
  CC      drivers/video/fbmon.o
  CC      drivers/video/fbcmap.o
  CC      drivers/video/fbsysfs.o
  CC      drivers/video/modedb.o
  CC      drivers/video/fbcvt.o
  LD      drivers/video/fb.o
  CC      drivers/video/console/dummycon.o
  LD      drivers/video/console/built-in.o
  CC      drivers/video/cfbfillrect.o
  CC      drivers/video/cfbcopyarea.o
  CC      drivers/video/cfbimgblt.o
  CC      drivers/video/output.o
  LD      drivers/video/built-in.o
  LD      drivers/built-in.o
  CC      arch/sh/drivers/heartbeat.o
  LD      arch/sh/drivers/built-in.o
  CC      net/socket.o
  CC      net/core/sock.o
  CC      net/core/request_sock.o
  CC      net/core/skbuff.o
  CC      net/core/iovec.o
  CC      net/core/datagram.o
  CC      net/core/stream.o
  CC      net/core/scm.o
  CC      net/core/gen_stats.o
  CC      net/core/gen_estimator.o
  CC      net/core/net_namespace.o
  CC      net/core/secure_seq.o
  CC      net/core/sysctl_net_core.o
  CC      net/core/skb_dma_map.o
  CC      net/core/dev.o
  CC      net/core/ethtool.o
  CC      net/core/dev_mcast.o
  CC      net/core/dst.o
  CC      net/core/netevent.o
  CC      net/core/neighbour.o
  CC      net/core/rtnetlink.o
  CC      net/core/utils.o
  CC      net/core/link_watch.o
  CC      net/core/filter.o
  CC      net/core/flow.o
  CC      net/core/net-sysfs.o
  LD      net/core/built-in.o
  CC      net/ethernet/eth.o
  LD      net/ethernet/built-in.o
  CC      net/ipv4/route.o
  CC      net/ipv4/inetpeer.o
  CC      net/ipv4/protocol.o
  CC      net/ipv4/ip_input.o
  CC      net/ipv4/ip_fragment.o
  CC      net/ipv4/ip_forward.o
  CC      net/ipv4/ip_options.o
  CC      net/ipv4/ip_output.o
  CC      net/ipv4/ip_sockglue.o
  CC      net/ipv4/inet_hashtables.o
  CC      net/ipv4/inet_timewait_sock.o
  CC      net/ipv4/inet_connection_sock.o
  CC      net/ipv4/tcp.o
  CC      net/ipv4/tcp_input.o
  CC      net/ipv4/tcp_output.o
  CC      net/ipv4/tcp_timer.o
  CC      net/ipv4/tcp_ipv4.o
  CC      net/ipv4/tcp_minisocks.o
  CC      net/ipv4/tcp_cong.o
  CC      net/ipv4/datagram.o
  CC      net/ipv4/raw.o
  CC      net/ipv4/udp.o
  CC      net/ipv4/udplite.o
  CC      net/ipv4/arp.o
  CC      net/ipv4/icmp.o
  CC      net/ipv4/devinet.o
  CC      net/ipv4/af_inet.o
  CC      net/ipv4/igmp.o
  CC      net/ipv4/fib_frontend.o
  CC      net/ipv4/fib_semantics.o
  CC      net/ipv4/inet_fragment.o
  CC      net/ipv4/sysctl_net_ipv4.o
  CC      net/ipv4/fib_hash.o
  CC      net/ipv4/proc.o
  CC      net/ipv4/xfrm4_mode_beet.o
  CC      net/ipv4/inet_lro.o
  CC      net/ipv4/tunnel4.o
  CC      net/ipv4/xfrm4_mode_transport.o
  CC      net/ipv4/xfrm4_mode_tunnel.o
  CC      net/ipv4/ipconfig.o
  CC      net/ipv4/netfilter.o
  CC      net/ipv4/inet_diag.o
  CC      net/ipv4/tcp_diag.o
  CC      net/ipv4/tcp_cubic.o
  CC      net/ipv4/xfrm4_policy.o
  CC      net/ipv4/xfrm4_state.o
  CC      net/ipv4/xfrm4_input.o
  CC      net/ipv4/xfrm4_output.o
  LD      net/ipv4/built-in.o
  CC      net/ipv6/af_inet6.o
  CC      net/ipv6/anycast.o
  CC      net/ipv6/ip6_output.o
  CC      net/ipv6/ip6_input.o
  CC      net/ipv6/addrconf.o
  CC      net/ipv6/addrlabel.o
  CC      net/ipv6/route.o
  CC      net/ipv6/ip6_fib.o
  CC      net/ipv6/ipv6_sockglue.o
  CC      net/ipv6/ndisc.o
  CC      net/ipv6/udp.o
  CC      net/ipv6/udplite.o
  CC      net/ipv6/raw.o
  CC      net/ipv6/protocol.o
  CC      net/ipv6/icmp.o
  CC      net/ipv6/mcast.o
  CC      net/ipv6/reassembly.o
  CC      net/ipv6/tcp_ipv6.o
  CC      net/ipv6/exthdrs.o
  CC      net/ipv6/datagram.o
  CC      net/ipv6/ip6_flowlabel.o
  CC      net/ipv6/inet6_connection_sock.o
  CC      net/ipv6/sysctl_net_ipv6.o
  CC      net/ipv6/xfrm6_policy.o
  CC      net/ipv6/xfrm6_state.o
  CC      net/ipv6/xfrm6_input.o
  CC      net/ipv6/xfrm6_output.o
  CC      net/ipv6/netfilter.o
  CC      net/ipv6/proc.o
  LD      net/ipv6/ipv6.o
  CC      net/ipv6/xfrm6_mode_transport.o
  CC      net/ipv6/xfrm6_mode_tunnel.o
  CC      net/ipv6/xfrm6_mode_beet.o
  CC      net/ipv6/sit.o
  CC      net/ipv6/addrconf_core.o
  CC      net/ipv6/exthdrs_core.o
  CC      net/ipv6/inet6_hashtables.o
  LD      net/ipv6/built-in.o
  CC      net/mac80211/main.o
  CC      net/mac80211/sta_info.o
  CC      net/mac80211/wep.o
  CC      net/mac80211/wpa.o
  CC      net/mac80211/scan.o
  CC      net/mac80211/ht.o
  CC      net/mac80211/agg-tx.o
  CC      net/mac80211/agg-rx.o
  CC      net/mac80211/ibss.o
  CC      net/mac80211/mlme.o
  CC      net/mac80211/iface.o
  CC      net/mac80211/rate.o
  CC      net/mac80211/michael.o
  CC      net/mac80211/tkip.o
  CC      net/mac80211/aes_ccm.o
  CC      net/mac80211/aes_cmac.o
  CC      net/mac80211/cfg.o
  CC      net/mac80211/rx.o
  CC      net/mac80211/spectmgmt.o
  CC      net/mac80211/tx.o
  CC      net/mac80211/key.o
  CC      net/mac80211/util.o
  CC      net/mac80211/wme.o
  CC      net/mac80211/event.o
  CC      net/mac80211/pm.o
  CC      net/mac80211/rc80211_minstrel.o
  LD      net/mac80211/mac80211.o
  LD      net/mac80211/built-in.o
  CC      net/netfilter/core.o
  CC      net/netfilter/nf_log.o
  CC      net/netfilter/nf_queue.o
  CC      net/netfilter/nf_sockopt.o
  LD      net/netfilter/netfilter.o
  LD      net/netfilter/built-in.o
  CC      net/netlink/af_netlink.o
  CC      net/netlink/genetlink.o
  LD      net/netlink/built-in.o
  CC      net/packet/af_packet.o
  LD      net/packet/built-in.o
  CC      net/sched/sch_generic.o
net/sched/sch_generic.c: In function ‘dev_graft_qdisc’:
net/sched/sch_generic.c:662:2: warning: the comparison will always evaluate as ‘true’ for the address of ‘noop_qdisc’ will never be NULL [-Waddress]
  CC      net/sched/sch_mq.o
  LD      net/sched/built-in.o
  CC      net/sunrpc/clnt.o
  CC      net/sunrpc/xprt.o
  CC      net/sunrpc/socklib.o
  CC      net/sunrpc/xprtsock.o
  CC      net/sunrpc/sched.o
  CC      net/sunrpc/auth.o
  CC      net/sunrpc/auth_null.o
  CC      net/sunrpc/auth_unix.o
  CC      net/sunrpc/auth_generic.o
  CC      net/sunrpc/svc.o
  CC      net/sunrpc/svcsock.o
net/sunrpc/svcsock.c: In function ‘svc_setup_socket’:
net/sunrpc/svcsock.c:726:6: warning: ‘optname’ may be used uninitialized in this function [-Wuninitialized]
net/sunrpc/svcsock.c:694:18: note: ‘optname’ was declared here
net/sunrpc/svcsock.c:726:6: warning: ‘level’ may be used uninitialized in this function [-Wuninitialized]
net/sunrpc/svcsock.c:694:11: note: ‘level’ was declared here
  CC      net/sunrpc/svcauth.o
  CC      net/sunrpc/svcauth_unix.o
net/sunrpc/svcauth_unix.c: In function ‘svcauth_unix_set_client’:
net/sunrpc/svcauth_unix.c:709:22: warning: ‘sin6’ may be used uninitialized in this function [-Wuninitialized]
  CC      net/sunrpc/addr.o
  CC      net/sunrpc/rpcb_clnt.o
  CC      net/sunrpc/timer.o
  CC      net/sunrpc/xdr.o
  CC      net/sunrpc/sunrpc_syms.o
  CC      net/sunrpc/cache.o
  CC      net/sunrpc/rpc_pipe.o
  CC      net/sunrpc/svc_xprt.o
  CC      net/sunrpc/stats.o
  CC      net/sunrpc/sysctl.o
  LD      net/sunrpc/sunrpc.o
  LD      net/sunrpc/built-in.o
  CC      net/unix/af_unix.o
  CC      net/unix/garbage.o
  CC      net/unix/sysctl_net_unix.o
  LD      net/unix/unix.o
  LD      net/unix/built-in.o
  CC      net/wireless/wext.o
  CC      net/wireless/core.o
  CC      net/wireless/sysfs.o
  CC      net/wireless/radiotap.o
  CC      net/wireless/util.o
  CC      net/wireless/reg.o
  CC      net/wireless/scan.o
net/wireless/scan.c: In function ‘cfg80211_inform_bss’:
net/wireless/scan.c:482:6: warning: comparison between ‘enum cfg80211_signal_type’ and ‘enum nl80211_bss’ [-Wenum-compare]
net/wireless/scan.c: In function ‘cfg80211_inform_bss_frame’:
net/wireless/scan.c:527:6: warning: comparison between ‘enum cfg80211_signal_type’ and ‘enum nl80211_bss’ [-Wenum-compare]
  CC      net/wireless/nl80211.o
  CC      net/wireless/mlme.o
  CC      net/wireless/ibss.o
  CC      net/wireless/sme.o
  CC      net/wireless/chan.o
  CC      net/wireless/wext-compat.o
  CC      net/wireless/wext-sme.o
  LD      net/wireless/cfg80211.o
  CC      net/wireless/lib80211.o
  CC      net/wireless/lib80211_crypt_wep.o
  CC      net/wireless/lib80211_crypt_ccmp.o
  CC      net/wireless/lib80211_crypt_tkip.o
  LD      net/wireless/built-in.o
  CC      net/xfrm/xfrm_policy.o
  CC      net/xfrm/xfrm_state.o
  CC      net/xfrm/xfrm_hash.o
  CC      net/xfrm/xfrm_input.o
  CC      net/xfrm/xfrm_output.o
  CC      net/xfrm/xfrm_algo.o
  CC      net/xfrm/xfrm_sysctl.o
  LD      net/xfrm/built-in.o
  CC      net/sysctl_net.o
  LD      net/built-in.o
  AS      arch/sh/lib/movmem.o
  CC      arch/sh/lib/ashldi3.o
  CC      arch/sh/lib/ashrdi3.o
  CC      arch/sh/lib/lshrdi3.o
  AS      arch/sh/lib/ashlsi3.o
  AS      arch/sh/lib/ashrsi3.o
  AS      arch/sh/lib/ashiftrt.o
  AS      arch/sh/lib/lshrsi3.o
  AS      arch/sh/lib/udiv_qrnnd.o
  CC      arch/sh/lib/io.o
  LD      arch/sh/lib/built-in.o
  AS      arch/sh/lib/__clear_user.o
  AS      arch/sh/lib/checksum.o
  AS      arch/sh/lib/copy_page.o
  CC      arch/sh/lib/delay.o
  CC      arch/sh/lib/div64-generic.o
  AS      arch/sh/lib/div64.o
  AS      arch/sh/lib/memchr.o
  AS      arch/sh/lib/memcpy-sh4.o
  AS      arch/sh/lib/memmove.o
  AS      arch/sh/lib/memset-sh4.o
  AS      arch/sh/lib/strlen.o
  AS      arch/sh/lib/udivsi3.o
  AS      arch/sh/lib/udivsi3_i4i.o
  AR      arch/sh/lib/lib.a
  CC      lib/bcd.o
  CC      lib/div64.o
  CC      lib/sort.o
  CC      lib/parser.o
  CC      lib/halfmd4.o
  CC      lib/debug_locks.o
  CC      lib/random32.o
  CC      lib/bust_spinlocks.o
  CC      lib/hexdump.o
  CC      lib/kasprintf.o
  CC      lib/bitmap.o
  CC      lib/scatterlist.o
  CC      lib/string_helpers.o
  CC      lib/gcd.o
  CC      lib/lcm.o
  CC      lib/iomap_copy.o
  CC      lib/devres.o
  CC      lib/find_last_bit.o
  CC      lib/hweight.o
  CC      lib/kernel_lock.o
  CC      lib/smp_processor_id.o
  CC      lib/bitrev.o
  CC      lib/crc-itu-t.o
  HOSTCC  lib/gen_crc32table
  GEN     lib/crc32table.h
  CC      lib/crc32.o
  CC      lib/libcrc32c.o
  CC      lib/zlib_deflate/deflate.o
  CC      lib/zlib_deflate/deftree.o
  CC      lib/zlib_deflate/deflate_syms.o
  LD      lib/zlib_deflate/zlib_deflate.o
  LD      lib/zlib_deflate/built-in.o
  CC      lib/zlib_inflate/inffast.o
  CC      lib/zlib_inflate/inflate.o
  CC      lib/zlib_inflate/infutil.o
  CC      lib/zlib_inflate/inftrees.o
  CC      lib/zlib_inflate/inflate_syms.o
  LD      lib/zlib_inflate/zlib_inflate.o
  LD      lib/zlib_inflate/built-in.o
  CC      lib/lmb.o
  CC      lib/syscall.o
  CC      lib/nlattr.o
  CC      lib/atomic64.o
  LD      lib/built-in.o
  CC      lib/argv_split.o
  CC      lib/bug.o
  CC      lib/cmdline.o
  CC      lib/ctype.o
  CC      lib/dec_and_lock.o
  CC      lib/decompress.o
  CC      lib/decompress_inflate.o
  CC      lib/dump_stack.o
  CC      lib/extable.o
  CC      lib/find_next_bit.o
  CC      lib/flex_array.o
  CC      lib/idr.o
  CC      lib/int_sqrt.o
  CC      lib/ioremap.o
  CC      lib/irq_regs.o
  CC      lib/is_single_threaded.o
  CC      lib/klist.o
  CC      lib/kobject.o
  CC      lib/kobject_uevent.o
  CC      lib/kref.o
  CC      lib/md5.o
  CC      lib/plist.o
  CC      lib/prio_heap.o
  CC      lib/prio_tree.o
  CC      lib/proportions.o
  CC      lib/radix-tree.o
  CC      lib/ratelimit.o
  CC      lib/rbtree.o
  CC      lib/reciprocal_div.o
  CC      lib/rwsem-spinlock.o
  CC      lib/sha1.o
  CC      lib/show_mem.o
  CC      lib/string.o
  CC      lib/vsprintf.o
  AR      lib/lib.a
  LD      vmlinux.o
  MODPOST vmlinux.o
  LD      .tmp_vmlinux
  HTABLE  .tmp_vmlinux
  CC      .tmp_vmlinux.mod.o
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  SYMHASH vmlinux
  Building modules, stage 2.
  MODPOST 4 modules
  CC      crypto/ansi_cprng.mod.o
In file included from crypto/ansi_cprng.mod.c:2:0:
include/linux/vermagic.h:30:2: warning: multi-line comment [-Wcomment]
  LD [M]  crypto/ansi_cprng.ko
  SYMHASH crypto/ansi_cprng.ko
  CC      crypto/cbc.mod.o
In file included from crypto/cbc.mod.c:2:0:
include/linux/vermagic.h:30:2: warning: multi-line comment [-Wcomment]
  LD [M]  crypto/cbc.ko
  SYMHASH crypto/cbc.ko
  CC      crypto/pcbc.mod.o
In file included from crypto/pcbc.mod.c:2:0:
include/linux/vermagic.h:30:2: warning: multi-line comment [-Wcomment]
  LD [M]  crypto/pcbc.ko
  SYMHASH crypto/pcbc.ko
  CC      drivers/scsi/scsi_wait_scan.mod.o
In file included from drivers/scsi/scsi_wait_scan.mod.c:2:0:
include/linux/vermagic.h:30:2: warning: multi-line comment [-Wcomment]
  LD [M]  drivers/scsi/scsi_wait_scan.ko
  SYMHASH drivers/scsi/scsi_wait_scan.ko
root@Ubuntu32:/home/zhangbin/STM/SDK36.2_SSDK36_PR_RC1/stapp# 

你可能感兴趣的:(make kernel MENUCONFIG=1)

  • 前端框架入门：Vue 基础 风亦辰739 前后端开发全栈指南vue.js前端框架前端
    Vue.js是一款流行的前端框架，专注于构建用户界面。它采用响应式数据绑定和组件化开发，易于上手且功能强大。Vue3版本引入了CompositionAPI，提升了开发效率。一、Vue.js基础1.Vue介绍Vue是一个渐进式JavaScript框架，可用于：构建单页应用（SPA）。组件化开发，提高代码复用性。结合Vuex（状态管理）和VueRouter（路由）开发大型应用。2.Vue模板语法Vue
  • 算法小分队-刷题2 「已注销」 c++
    注：代码周日刷完一块交3.20小鱼的游泳时间(1425)模拟竖式运算，注意借位问题3.21小鱼比可爱(1428)简单的循环比较大小3.22小玉在游泳(1420)注意数据的处理，浮点还是整数3.23手机(1765)只会简单的条件循环判断然后累加3.24轰炸III(1830)调错：轰炸的次序处理
  • C# WinForms 输入验证实战：正则表达式从入门到高效应用 Ro小陌 窗体C#WinForms算法c#正则表达式开发语言
    在C#WinForms开发中，正则表达式常用于验证用户输入（如文本框内容）。以下是结合WinForms的详细正则表达式应用指南：1.正则表达式基础使用System.Text.RegRegularExpressions命名空间：csharpusingSystem.Text.RegularExpressions;常用类：Regex2.WinForms输入验证示例场景：验证邮箱输入csharppriva
  • 残疾人员检测数据集VOC+YOLO格式3168张5类别 FL1623863129 数据集YOLO深度学习机器学习
    数据集格式：PascalVOC格式+YOLO格式(不包含分割路径的txt文件，仅仅包含jpg图片以及对应的VOC格式xml文件和yolo格式txt文件)图片数量(jpg文件个数)：3168标注数量(xml文件个数)：3168标注数量(txt文件个数)：3168标注类别数：5标注类别名称(注意yolo格式类别顺序不和这个对应，而以labels文件夹classes.txt为准):["person-ba
  • 电商精准营销—数据预处理概述 Ssaty. python
    第1关：数据预处理-数据清洗任务描述本关任务：对指定样本数据进行预处理，掌握数据预处理的技巧。相关知识为了完成本关任务，你需要掌握：1.数据样本抽取的方法；2、数据清洗的技巧。数据分析的基本流程：在数据分析中，通常着眼于需求，围绕着分析的目的进行数据分析工作。在大数据时代，数据量众多，数据信息质量不同，只有围绕这分析目的才能快速选择出有用的数据。原因很简单，从错误的数据里，肯定找不出正确的分析结论
  • DFS深搜 Darling02zjh 算法学习深度优先算法
    排列数字题目：给定一个整数n，将数字1∼n排成一排，将会有很多种排列方法。现在，请你按照字典序将所有的排列方法输出输入格式共一行，包含一个整数n。输出格式按字典序输出所有排列方案，每个方案占一行。数据范围1≤n≤7输入样例3输出样例：123132213231312321对于DFS深度搜索就像是一条路走到黑在这里假如n=3，需要看一共有几种组合方法红色的就是深搜的路线；对于这道题把思路转化成代码就是
  • 寻找通义灵码 AI 程序员 {头号玩家} ，体验 QwQ-Plus、DeepSeek 满血版的通义灵码 云原生
    2025年1月，通义灵码AI程序员全面上线，同时支持VSCode、JetBrainsIDEs，是国内首个真正落地的AI程序员。近期，通义灵码能力再升级全新上线模型选择功能，目前已经支持QwQ-plus、DeepSeek满血版模型，用户可以在VSCode和JetBrains里搜索并下载最新通义灵码插件，在输入框里选择模型，即可轻松切换模型。通义灵码联合CHERRY中国全网发起寻找AI程序员{头号玩家
  • 鸿蒙harmonyOS：笔记 正则表达式 一只小风华~ 笔记前端华为harmonyos正则表达式
    从给出的文本中，按照既定的相关规则，匹配出符合的数据，其中的规则就是正则表达式，使用正则表达式，可以使得我们用简洁的代码就能实现一定复杂的逻辑，比如判断一个邮箱账号是否符合正常的邮箱账号，再比如判断一个手机号是否正常的手机号，等等，正因为有了正则，得以让文本处理起来更加的简单。日常开发中主要用来做三件事:匹配、替换、提取。手机号表单要求用户只能输入11位的数字(匹配)过滤掉页面内容中的一些敏感词(
  • Goroutine 与 Channel 九班长 Golang算法数据库网络golangGoroutineChannel
    Goroutine和Channel是Go语言并发编程的核心概念。理解它们的原理和使用方法，对于编写高效、安全的并发程序至关重要。以下是对Goroutine和Channel的深入解析，包括它们的原理、使用场景、常见问题及最佳实践。1.Goroutine1.1什么是Goroutine？Goroutine是Go语言中的轻量级线程，由Go运行时（runtime）管理。与操作系统线程相比，Goroutine
  • Python如何实现粒子效果如烟雾、火焰、雨滴等. openwin_top python编程示例系列二python开发语言
    microPythonPython最小内核源码解析NI-motion运动控制c语言示例代码解析python编程示例系列python编程示例系列二python的Web神器Streamlit如何应聘高薪职位在Panda3D中实现粒子效果主要依赖于其内置的粒子系统。这个系统允许开发者创建各种动态的视觉效果，如烟雾、火焰、雨滴等。下面我将详细介绍如何在Panda3D中添加一个简单的粒子效果。步骤1:准备粒
  • （一）stm32F411RE点亮板上LED——基于HAL库（微控第一周MCU验收） yxt230791 stm32嵌入式硬件单片机
    近期有点懒，还是先直接上链接通过网盘分享的文件：led.rar链接:https://pan.baidu.com/s/1GUI7wd9dtNwqPhpS9GfLag提取码:XDer--来自百度网盘超级会员v2的分享
  • FFmpeg 命令行全解析：高效音视频处理从入门到精通 码流怪侠 ffmpeg音视频ffplayffprobe实时音视频视频编解码直播转码
    FFmpegFFmpeg是一款开源的多媒体处理工具集，支持音视频编解码、格式转换、流媒体处理等全链路操作。核心功能与工具:多媒体全链路支持支持1000+音视频编解码格式（如H.264、HEVC、AV1）和协议（RTMP、RTSP、HLS），覆盖录制、转码、流化等全流程。提供三大核心工具：ffmpeg：转码与流处理（如ffmpeg-iinput.mp4output.avi）。ffplay：媒体播放（
  • 常见的数据库操作语言DDL、DML、DQL和DCL 失败尽是常态Z MySQL基础学习数据库sqlmysql
    DDL、DML、DQL和DCL是常见的数据库操作语言，分别代表数据定义语言、数据操纵语言、数据查询语言和数据控制语言。1、数据定义语言（DDL）用于在数据库中创建、修改或删除表、视图、索引、序列等对象。常见的DDL命令有CREATE、ALTER和DROP等。2、数据操纵语言（DML）用于在数据库中对表进行插入、更新、删除等操作。常见的DML命令有INSERT、UPDATE和DELETE等。3、数据
  • Python中的机制：全局解释锁和回收机制 林十一npc Python语言python开发语言
    Python中的机制：全局解释锁和回收机制一、全局解释锁GIL1.基础原理全局解释锁：是CPython中引入的一种机制，确保同一时刻保持一个线程执行Python的字节码。锁的粒度：GIL是全局唯一的锁，线程在执行Pyhton代码前必须要获取GIL,执行完毕后进行释放。线程切换：CPython解释器通过固定间隔（如python字节码指令或遇到I/O操作），释放GIL,触发线程切换。底层实现GIL的实
  • 单例模式中的饿汉和懒汉模式 筑梦小子 单例模式javac++
    目录一.什么是单例模式一.饿汉模式1.饿汉模式的概念2.饿汉模式代码2.多线程是否线程安全二.懒汉模式1.懒汉模式的概念2.单线程情况下的懒汉模式2.多线程情况下的懒汉模式（1）导致懒汉模式在多线程情况下的不安全原因（2）解决方法代码示例版本1版本2版本2的解释说明一.什么是单例模式保证某个类在程序中只存在一份实例，而不会创建多个实例，这样就会提高效率。在单利模式中一般只提供一个getInstan
  • hadoop-HDFS操作 wenying_44323744 hadoophdfseclipse
    1.使用的是hadoop的用户登录到系统，那么cd~是跳转到/home/hadoop下。2.在操作hdfs时，需要在hadoop用户下的/usr/local/hadoop，此时是在根目录下。cd/usr/local/hadoop或者cd/cdusr/local/hadoop3.回到Linux的操作目录我们把安装包放在了linux系统下的Downloads文件下，可以sudotar-zxf~/Dow
  • 基于ssm的药房管理系统 AI天才研究院 计算AI大模型企业级应用开发实战ChatGPT计算科学神经计算深度学习神经网络大数据人工智能大型语言模型AIAGILLMJavaPython架构设计AgentRPA
    基于ssm的药房管理系统作者：禅与计算机程序设计艺术1.背景介绍1.1药房管理系统的重要性在现代医疗体系中,药房管理系统扮演着至关重要的角色。高效、准确、安全的药品管理不仅关系到患者的健康,更是医院运营的重要一环。传统的人工管理模式已经难以满足日益增长的医疗需求,因此,开发一套功能完善、易于操作的药房管理系统势在必行。1.2SSM框架的优势SSM(Spring、SpringMVC、MyBatis)
  • 大模型的应用与微调：如何调用 LLM？从 OpenAI API 到本地部署 晴天彩虹雨 AI大模型ai语言模型gpt人工智能
    本篇文章将详细介绍如何调用大语言模型（LLM），涵盖OpenAIAPI、DeepSeek、Manus、通义千问等模型的调用方式，并探讨如何在本地部署LLM进行推理。1.调用OpenAIAPI（GPT系列）OpenAI提供了RESTfulAPI供开发者调用GPT系列模型。示例：使用Python调用OpenAIAPIimportopenaiopenai.api_key="your_api_key"re
  • idear 出现unable to save setting:failed to save settings.please restart intellij idea异常 不开心就吐槽 intellij-idea
    1.idea出现一下异常unabletosavesetting:failedtosavesettings.pleaserestartintellijidea2.解决办法先关闭IDEA，然后找到C:\Users\wuxin.IntelliJIdea2019.3\system\caches（管理员目录中的位置），删除caches目录中所有的文件（不要删除caches目录），再启动IDEA就可以了。3.
  • Oracle不支持的字符集 (在类路径中添加 orai18n.jar): ZHS16GBK 不开心就吐槽 oraclejarjava
    1.报错内容出现java.sql.SQLException:不支持的字符集(在类路径中添加orai18n.jar):ZHS16GBKExceptioninthread"main"java.sql.SQLException:不支持的字符集(在类路径中添加orai18n.jar):ZHS16GBKatoracle.sql.CharacterSetUnknown.failCharsetUnknown(C
  • python实现简易任务管理器 Roc-xb python服务器linux
    本章教程，主要利用python实现一个简单的任务管理器，可以快速结束任务进程。目录一、实例代码二、效果演示一、实例代码#!/usr/bin/python#-*-coding:UTF-8-*-"""@author:Roc-xb"""#encoding:utf-8importsubprocessdefexecute_cmd(command):subprocess.run('chcp65001',she
  • 跨平台RTSP高性能实时播放器实现思路 江同学_ 音视频实时音视频
    跨平台RTSP高性能实时播放器实现思路目标：局域网100ms以内超低延迟一、引言现有播放器（如VLC）在RTSP实时播放场景中面临高延迟（通常数秒）和资源占用大的问题。本文提出一种跨平台解决方案，通过网络层改造、FFmpeg硬解码优化、OpenGL跨平台渲染等技术，实现100ms以内延迟，并支持H.264/H.265编码，适用于医疗、安防等对实时性要求苛刻的场景。二、网络层优化：TCP/UDP双模
  • STM32外部中断深度解析：从原理到实战应用—矩阵键盘中断驱动（中） | 零基础入门STM32第八十步 触角01010001 STM32入门教程（100步）stm32驱动开发单片机嵌入式硬件物联网
    主题内容教学目的/扩展视频4x4阵列键盘电路连接，电路原理，驱动程序，调用函数。能用程序读出按键值。师从洋桃电子，杜洋老师文章目录一、系统整体架构设计1.1硬件连接拓扑1.2软件工作流程二、核心代码模块解析2.1主程序逻辑框架2.2中断初始化关键配置2.2.1RCC时钟配置2.2.2EXTI中断配置示例（PA4）三、中断处理机制详解3.1中断服务函数设计3.2中断标志位处理策略四、关键技术优化方案
  • Chapter 27: Expression Templates_《C++ Templates》notes 郭涤生 c/c++c++开发语言笔记
    ExpressionTemplatesKeyConcepts:Part1:CoreConcepts&CodeImplementationPart2:AdvancedConcepts&ExtensionsPart3:OptimizationAnalysisMultipleChoiceQuestions(HardDifficulty)DetailedDesignQuestionsAnswers&Exp
  • 内部类（四大类型） *+ java开发语言
    内部类分为四种一.实例内部类classOutclass{publicintdate1=1;publicstaticintdate2=2;privateintdate3=3;classInnerClass{publicintdate4=4;publicstaticfinalintdate5=5;privateintdate6=6;publicvoidtest(){System.out.println
  • 【html5期末大作业】基于HTML仿QQ音乐官网网站 IT-司马青衫 htmlhtml5课程设计
    精彩专栏推荐文末获取联系✍️作者简介:一个热爱把逻辑思维转变为代码的技术博主作者主页:【主页——获取更多优质源码】web前端期末大作业：【毕设项目精品实战案例(1000套)】程序员有趣的告白方式：【HTML七夕情人节表白网页制作(110套)】超炫酷的Echarts大屏可视化源码：【Echarts大屏展示大数据平台可视化(150套)】HTML+CSS+JS实例代码：【️HTML+CSS+JS实例代码
  • Java实现生日悖论的算法，计算至少有两个人生日相同的概率 YiWait java算法
    importjava.util.Random;publicclassBirthdayParadox{publicstaticvoidmain(String[]args){intn=23;//邀请的人数inttrials=1000000;//实验次数intcount=0;//至少有两个人生日相同的实验次数Randomrand=newRandom();for(inti=0;i
  • JVM 类加载 详解 飞滕人生TYF javajvmjava类加载
    JVM类加载详解JVM类加载（JavaClassLoading）是Java虚拟机(JVM)执行Java程序的重要机制之一，用于将.class文件动态加载到内存中并进行验证、解析和初始化，最终生成可以直接使用的类对象。1.类加载的基本概念1.1什么是类加载？类加载是将.class文件加载到JVM并转化为内存中可以运行的类的过程。目标：生成一个内存中的Class对象，供程序使用。触发点：当程序首次访问
  • COMP 5076 Problem Solving in the Digital Age W_X_99515681 数据结构
    COMP5076ProblemSolvingintheDigitalAgeAssignment1–Wizard-of-OzPaperPrototypeUniSASTEMTheUniversityofSouthAustralia2025SP2Warning:ThismaterialhasbeenreproducedandcommunicatedtoyoubyoronbehalfoftheUniver
  • SQLServer : DDL,DML,DQL,DCL的区别 SJ15630070060 SqlServersqlserver数据库
    01、DDL（DataDefinitionLanguages）语句：即数据库定义语句，用来创建数据库中的表、索引、视图、存储过程、触发器等对象。SQLServerDLL语法是指SQLServer数据库定义域发的语法规则集合，主要包括创建、修改和删除数据库对象的语句。常用的语句关键字有：【createtable创建表】、【altertable修改表】、【droptable删除表】、【truncate
  • jdk tomcat 环境变量配置 Array_06 javajdktomcat
    Win7 下如何配置java环境变量 1。准备jdk包，win7系统，tomcat安装包（均上网下载即可） 2。进行对jdk的安装，尽量为默认路径（但要记住啊！！以防以后配置用。。。） 3。分别配置高级环境变量。   电脑-->右击属性-->高级环境变量-->环境变量。 分别配置 : path    &nbs
  • Spring调SDK包报java.lang.NoSuchFieldError错误 bijian1013 javaspring
            在工作中调另一个系统的SDK包，出现如下java.lang.NoSuchFieldError错误。 org.springframework.web.util.NestedServletException: Handler processing failed; nested exception is java.l
  • LeetCode[位运算] - #136 数组中的单一数 Cwind java题解位运算LeetCodeAlgorithm
    原题链接：#136 Single Number 要求： 给定一个整型数组，其中除了一个元素之外，每个元素都出现两次。找出这个元素 注意：算法的时间复杂度应为O(n)，最好不使用额外的内存空间 难度：中等 分析： 题目限定了线性的时间复杂度，同时不使用额外的空间，即要求只遍历数组一遍得出结果。由于异或运算 n XOR n = 0, n XOR 0 = n，故将数组中的每个元素进
  • qq登陆界面开发 15700786134 qq
    今天我们来开发一个qq登陆界面，首先写一个界面程序，一个界面首先是一个Frame对象，即是一个窗体。然后在这个窗体上放置其他组件。代码如下： public class First {         public void initul(){        jf=ne
  • Linux的程序包管理器RPM 被触发 linux
    在早期我们使用源代码的方式来安装软件时，都需要先把源程序代码编译成可执行的二进制安装程序，然后进行安装。这就意味着每次安装软件都需要经过预处理-->编译-->汇编-->链接-->生成安装文件--> 安装，这个复杂而艰辛的过程。为简化安装步骤，便于广大用户的安装部署程序，程序提供商就在特定的系统上面编译好相关程序的安装文件并进行打包，提供给大家下载，我们只需要根据自己的
  • socket通信遇到EOFException 肆无忌惮_ EOFException
    java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2281) at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:
  • 基于spring的web项目定时操作 知了ing javaWeb
    废话不多说，直接上代码，很简单 配置一下项目启动就行 1，web.xml <?xml version="1.0" encoding="UTF-8"?> <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="h
  • 树形结构的数据库表Schema设计 矮蛋蛋 schema
    原文地址： http://blog.csdn.net/MONKEY_D_MENG/article/details/6647488     程序设计过程中，我们常常用树形结构来表征某些数据的关联关系，如企业上下级部门、栏目结构、商品分类等等，通常而言，这些树状结构需要借助于数据库完成持久化。然而目前的各种基于关系的数据库，都是以二维表的形式记录存储数据信息，
  • maven将jar包和源码一起打包到本地仓库 alleni123 maven
    http://stackoverflow.com/questions/4031987/how-to-upload-sources-to-local-maven-repository <project> ... <build> <plugins> <plugin> <groupI
  • java IO操作 与 File 获取文件或文件夹的大小，可读，等属性！！！ 百合不是茶
    类 File File是指文件和目录路径名的抽象表示形式。 1，何为文件： 标准文件（txt doc mp3...） 目录文件（文件夹） 虚拟内存文件   2，File类中有可以创建文件的 createNewFile（）方法,在创建新文件的时候需要try{} catch(）{}因为可能会抛出异常；也有可以判断文件是否是一个标准文件的方法isFile();这些防抖都
  • Spring注入有继承关系的类（2） bijian1013 javaspring
    被注入类的父类有相应的属性，Spring可以直接注入相应的属性，如下所例：1.AClass类 package com.bijian.spring.test4; public class AClass { private String a; private String b; public String getA() { retu
  • 30岁转型期你能否成为成功人士 bijian1013 成长励志
            很多人由于年轻时走了弯路，到了30岁一事无成，这样的例子大有人在。但同样也有一些人，整个职业生涯都发展得很优秀，到了30岁已经成为职场的精英阶层。由于做猎头的原因，我们接触很多30岁左右的经理人，发现他们在职业发展道路上往往有很多致命的问题。在30岁之前，他们的职业生涯表现很优秀，但从30岁到40岁这一段，很多人
  • 【Velocity四】Velocity与Java互操作 bit1129 velocity
    Velocity出现的目的用于简化基于MVC的web应用开发，用于替代JSP标签技术，那么Velocity如何访问Java代码.本篇继续以Velocity三http://bit1129.iteye.com/blog/2106142中的例子为基础，      POJO    package com.tom.servlets; public
  • 【Hive十一】Hive数据倾斜优化 bit1129 hive
    什么是Hive数据倾斜问题   操作：join,group by,count distinct 现象：任务进度长时间维持在99%（或100%），查看任务监控页面，发现只有少量（1个或几个）reduce子任务未完成；查看未完成的子任务，可以看到本地读写数据量积累非常大，通常超过10GB可以认定为发生数据倾斜。 原因：key分布不均匀 倾斜度衡量：平均记录数超过50w且
  • 在nginx中集成lua脚本：添加自定义Http头，封IP等 ronin47 nginx lua csrf
    Lua是一个可以嵌入到Nginx配置文件中的动态脚本语言，从而可以在Nginx请求处理的任何阶段执行各种Lua代码。刚开始我们只是用Lua 把请求路由到后端服务器，但是它对我们架构的作用超出了我们的预期。下面就讲讲我们所做的工作。 强制搜索引擎只索引mixlr.com Google把子域名当作完全独立的网站，我们不希望爬虫抓取子域名的页面，降低我们的Page rank。 location /{
  • java-3.求子数组的最大和 bylijinnan java
    package beautyOfCoding; public class MaxSubArraySum { /** * 3.求子数组的最大和 题目描述： 输入一个整形数组，数组里有正数也有负数。 数组中连续的一个或多个整数组成一个子数组，每个子数组都有一个和。 求所有子数组的和的最大值。要求时间复杂度为O(n)。 例如输入的数组为1, -2, 3, 10, -4,
  • Netty源码学习-FileRegion bylijinnan javanetty
    今天看org.jboss.netty.example.http.file.HttpStaticFileServerHandler.java 可以直接往channel里面写入一个FileRegion对象，而不需要相应的encoder： //pipeline（没有诸如“FileRegionEncoder”的handler）： public ChannelPipeline ge
  • 使用ZeroClipboard解决跨浏览器复制到剪贴板的问题 cngolon 跨浏览器复制到粘贴板Zero Clipboard
    Zero Clipboard的实现原理 Zero Clipboard 利用透明的Flash让其漂浮在复制按钮之上，这样其实点击的不是按钮而是 Flash ，这样将需要的内容传入Flash，再通过Flash的复制功能把传入的内容复制到剪贴板。 Zero Clipboard的安装方法 首先需要下载 Zero Clipboard的压缩包，解压后把文件夹中两个文件：ZeroClipboard.js
  • 单例模式 cuishikuan 单例模式
    第一种（懒汉，线程不安全）： public class Singleton {   2     private static Singleton instance;   3     pri
  • spring+websocket的使用 dalan_123
    一、spring配置文件 <?xml version="1.0" encoding="UTF-8"?><beans xmlns="http://www.springframework.org/schema/beans"    xmlns:xsi="http://www.w3.or
  • 细节问题：ZEROFILL的用法范围。 dcj3sjt126com mysql
    1、zerofill把月份中的一位数字比如1，2，3等加前导0 mysql> CREATE TABLE t1 (year YEAR(4), month INT(2) UNSIGNED ZEROFILL,    -> day
  • Android开发10——Activity的跳转与传值 dcj3sjt126com Android开发
    Activity跳转与传值，主要是通过Intent类，Intent的作用是激活组件和附带数据。   一、Activity跳转 方法一Intent intent = new Intent(A.this, B.class); startActivity(intent)   方法二Intent intent = new Intent();intent.setCla
  • jdbc 得到表结构、主键 eksliang jdbc 得到表结构、主键
    转自博客：http://blog.csdn.net/ocean1010/article/details/7266042 假设有个con DatabaseMetaData dbmd = con.getMetaData(); rs = dbmd.getColumns(con.getCatalog(), schema, tableName, null); rs.getSt
  • Android 应用程序开关GPS gqdy365 android
    要在应用程序中操作GPS开关需要权限： <uses-permission android:name="android.permission.WRITE_SECURE_SETTINGS" /> 但在配置文件中添加此权限之后会报错，无法再eclipse里面正常编译，怎么办？ 1、方法一：将项目放到Android源码中编译； 2、方法二：网上有人说cl
  • Windows上调试MapReduce zhiquanliu mapreduce
    1.下载hadoop2x-eclipse-plugin https://github.com/winghc/hadoop2x-eclipse-plugin.git 把 hadoop2.6.0-eclipse-plugin.jar 放到eclipse plugin 目录中。 2.下载 hadoop2.6_x64_.zip http://dl.iteye.com/topics/download/d2b
  • 如何看待一些知名博客推广软文的行为？ justjavac 博客
    本文来自我在知乎上的一个回答：http://www.zhihu.com/question/23431810/answer/24588621 互联网上的两种典型心态： 当初求种像条狗，如今撸完嫌人丑 当初搜贴像条犬，如今读完嫌人软 你为啥感觉不舒服呢？ 难道非得要作者把自己的劳动成果免费给你用，你才舒服？ 就如同 Google 关闭了 Gooled Reader，那是
  • sql优化总结 macroli sql
    为了是自己对sql优化有更好的原则性，在这里做一下总结，个人原则如有不对请多多指教。谢谢！   要知道一个简单的sql语句执行效率，就要有查看方式，一遍更好的进行优化。   一、简单的统计语句执行时间 declare @d datetime ---定义一个datetime的变量set @d=getdate() ---获取查询语句开始前的时间select user_id
  • Linux Oracle中常遇到的一些问题及命令总结 超声波 oraclelinux
    1.linux更改主机名   (1)#hostname oracledb　　　　临时修改主机名 (2) vi /etc/sysconfig/network 　　修改hostname (3) vi /etc/hosts　　　　　　　　修改IP对应的主机名   2.linux重启oracle实例及监听的各种方法 （注意操作的顺序应该是先监听，后数据库实例） &nbs
  • hive函数大全及使用示例 superlxw1234 hadoophive函数
      具体说明及示例参 见附件文档。     文档目录：   目录 一、关系运算： 4 1. 等值比较: = 4 2. 不等值比较: <> 4 3. 小于比较: < 4 4. 小于等于比较: <= 4 5. 大于比较: > 5 6. 大于等于比较: >= 5 7. 空值判断: IS NULL 5
  • Spring 4.2新特性-使用@Order调整配置类加载顺序 wiselyman spring 4
    4.1 @Order Spring 4.2 利用@Order控制配置类的加载顺序 4.2 演示 两个演示bean package com.wisely.spring4_2.order; public class Demo1Service { } package com.wisely.spring4_2.order; public class
按字母分类： ABCDEFGHIJKLMNOPQRSTUVWXYZ其他