H3C 交换机限速和添加Vlan

 system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos lr outbound cir 10240				（10240=10MB）
[Sysname-GigabitEthernet1/0/1] qos lr inbound cir 10240
[Sysname-GigabitEthernet1/0/1]dis this  #查看该接口的VLAN 描述 限速等相关信息
[Sysname-GigabitEthernet1/0/1]description #百度_xx.xx.xx.xx_2M_B  添加此类的描述信息（如有需要）
display interface GigabitEthernet 1/0/26 #查看26端口状态
display interface brief  #查看所有端口的状态
[H3C]interface GigabitEthernet 1/0/24 #启用端口  
[H3C]undo shutdown   
[H3C]interface GigabitEthernet 1/0/24 #关闭端口  
[H3C]shutdown 
[H3C]interface GigabitEthernet 1/0/24  #将端口加入vlan 100
[H3C]port access vlan 100
[H3C]int Bridge-Aggregation 1 #放行vlan
[H3C]po tr per vlan 100 
[H3C]vlan 100 #批量放行vlan  
[H3C]port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/24

save #保存配置

出现ALL backups complete：...出现备份完成信息,表示完成

　注意：此命令适用于H3C S5110 S5130 等

转载于:https://www.cnblogs.com/xbyl/p/9428545.html