Linux DHCP Server 配置给FIT AP 使用的option
2010-09-17 09:45:52
标签：
Linux DHCP Server option FIT [ 推送到技术圈]
|
版权声明：原创作品，允许转载，转载时请务必以超链接形式标明文章 原始出处 、作者信息和本声明。否则将追究法律责任。 http://rs1987.blog.51cto.com/258703/392990
|
|
1 配置option 43
方案介绍
通过在Linux
上配置DHCP Server
为AP
提供IP
及option 43
选项。
1.2 配置思路
1) 下载、安装DHCP Server 相关程序。
2) 调试基本的dhcp启动服务、并验证能否获取ip。
3) 配置option 43。
1.3 配置文件
CentOS
Vi dhcpd.conf
ignore client-updates;
ddns-update-style ad-hoc;
option acip code 43 = string;
subnet 2.2.2.0 netmask 255.255.255.0 {
# --- default gateway
option routers 2.2.2.254;
option subnet-mask 255.255.255.0;
# --- AC IP
option acip 80:0B:00:00:01:02:02:02:FE:0B:45:14;
# --- pool
range dynamic-bootp 2.2.2.1 2.2.2.19;
default-lease-time 21600;
max-lease-time 43200;
}
以十六进制格式表示IP，80为选项类型，0B为选项长度，表示后面内容的长度，0000为Server Type,固定为0000，01为后面AC的IP地址的个数，“02:02:02:FE为AC的IP地址的十六进制，也就是说在配置时只需把自己的AC地址X.X.X.X换算成十六进制替换掉即可。“:0B:45:14”为固定格式说明前面定义的是一串ip地址。
1.4 检验配置效果
AC1# show ap status
Flags: o = operational[1], c = configure[0], d = download[0], b = boot[0]
a = auto AP, m = mesh AP, p/P = mesh portal (ena/actv), r = redundant[0] i = insecure, e = encrypted, u = unencrypted
Radio: E = enabled - 20MHz channel, S = sentry
W/w = enabled - 40MHz wide channel (HTplus/HTminus)
D = admin disabled
IP Address: * = AP behind NAT
AP Flag IP Address Model MAC Address Radio 1 Radio 2 Uptime
---- ---- --------------- ------------ ----------------- ------- ------- ------
2 o--i 2.2.2.1 AP1 00:0b:0e:90:01:00 E 11/18 E161/20 04h08m
AC1#
2 配置option 138
通过在Linux 上配置DHCP Server为AP提供IP及option 138选项。
2.2 配置思路
4) 下载、安装DHCP Server 相关程序。
5) 调试基本的dhcp启动服务、并验证能否获取ip。
6) 配置option 138。
2.3 配置文件
CentOS
Vi dhcpd.conf
CentOS
Vi dhcpd.conf
ignore client-updates;
ddns-update-style ad-hoc;
option acip code 138 = string;
subnet 2.2.2.0 netmask 255.255.255.0 {
# --- default gateway
option routers 2.2.2.254;
option subnet-mask 255.255.255.0;
# --- AC ip
option acip 01:01:01:01;
# --- pool
range dynamic-bootp 2.2.2.20 2.2.2.39;
default-lease-time 21600;
max-lease-time 43200;
}
以十六进制格式表示IP，“01:01:01:01为AC Loopback 0 IP地址的十六进制，也就是说在配置时只需把自己的AC Loopback 0 IP地址X.X.X.X换算成十六进制替换掉即可。
2.4 检验配置效果
AC2#show capwap state
index peer device state
1 2.2.2.20 : 32768 Run
AC2#show capwap detail
-----------CAPWAP CONTROL BLOCK----------
index is 0
Current State [ Idle ]
Recent recieved request's sequence number [43]
Recent recieved response's sequence number [0]
Recent send request's sequence number [0]
Retransmit Count [ 0 ]
Sending msg queue length [ 0 ]
Receive msg queue length [ 0 ]
On line timers:
My address [ 1.1.1.1 ]
My address6 [ :: ]
Peer address [ 2.2.2.20 ]
Peer address6 [ :: ]
Peer control port [ 5246 ]
Peer data port [ 5247 ]
Session ID [0] [ 0 ]
Session ID [1] [ 0 ]
Session ID [2] [ 0 ]
Session ID [3] [ 0 ]
Control socket [ 2057 ]
Data socket [ 2058 ]
Path MTU [ 1500 ]
Am I AP [ 0 ]
Over IPv4 [ 1 ]
Local or Split [ 1 ]
Local Switch [ 0 ]
-----------CAPWAP CONTROL BLOCK----------
index is 1
Current State [ Run ]
Recent recieved request's sequence number [141]
Recent recieved response's sequence number [25]
Recent send request's sequence number [25]
Retransmit Count [ 0 ]
Sending msg queue length [ 0 ]
Receive msg queue length [ 0 ]
On line timers: [echo interval ]
My address [ 1.1.1.1 ]
My address6 [ :: ]
Peer address [ 2.2.2.20 ]
Peer address6 [ :: ]
Peer control port [ 32768 ]
Peer data port [ 32769 ]
Session ID [0] [ 0 ]
Session ID [1] [ 0 ]
Session ID [2] [ 0 ]
Session ID [3] [ 0 ]
Control socket [ 2057 ]
Data socket [ 2058 ]
Path MTU [ 1500 ]
Am I AP [ 0 ]
Over IPv4 [ 1 ]
Local or Split [ 1 ]
Local Switch [ 0 ]
AC2#
本文出自 “ 蔚蓝的心情” 博客，请务必保留此出处 http://rs1987.blog.51cto.com/258703/392990
|