BUG:TreeView: NodeCheck Event Does Not Occur

BUG: TreeView: NodeCheck Event Does Not Occur

View products that this article applies to.

This article was previously published under Q221557

On This Page

• SYMPTOMS
• RESOLUTION
  • Step by Step Example
• STATUS
• MORE INFORMATION
  • Steps to Reproduce Behavior
• REFERENCES

Expand all | Collapse all

SYMPTOMS

When a TreeView control with the Checkboxes property set to True is placed on a...

When a TreeView control with the Checkboxes property set to True is placed on a form and the user presses the left-mouse button over a checkbox and then drags the mouse away from the checkbox before releasing the mouse button, the state of the checkbox is toggled, but a NodeCheck event does not occur.

Back to the top

RESOLUTION

You can work around the problem by programmatically ensuring that the event occu...

You can work around the problem by programmatically ensuring that the event occurs if the mouse has been dragged away from the checkbox.

Back to the top

Step by Step Example

1. Open a new Visual Basic Standard Exe project. Form1 is created by default.
2. On the Project menu, click Components. Select Microsoft Common Controls 6.0 and click OK.
3. Add a TreeView control to Form1.
4. Add the following code to the General Declarations section of Form1:

   Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" _
   
      (ByVal hWnd As Long, ByVal wMsg As Long, ByVal wParam As Long, _
   
       lParam As Any) As Long   ' <---
   
   
   
   ' treeview messages
   
   Private Const TV_FIRST = &H1100
   
   ' wParam = 0, lParam = lptvhti, rtns hItem
   
   Private Const TVM_HITTEST = (TV_FIRST + 17)
   
   
   
   Private Type POINTAPI   ' pt
   
      x As Long
   
      y As Long
   
   End Type
   
   
   
   ' structure passed with the TVM_HITTEST message
   
   Private Type TVHITTESTINFO
   
      pt As POINTAPI
   
      flags As Long
   
      hItem As Long
   
   End Type
   
   
   
   ' TVHITTESTINFO.flags value. An item's checkbox
   
   ' is in fact held in the item's state icon image.
   
   Private Const TVHT_ONITEMSTATEICON = &H40
   
   
   
   Private m_nodChecked As Node
   
   
   
   Private Sub Form_Load()
   
      Dim Node1 As Node
   
      Dim Node2 As Node
   
      Dim Node3 As Node
   
      Dim i As Integer
   
      Dim j As Integer
   
      Dim k As Integer
   
      ' For some convenience...
   
      With TreeView1
   
         .HideSelection = False
   
         .Indentation = 19 * Screen.TwipsPerPixelX
   
         .LabelEdit = tvwManual
   
         .LineStyle = tvwRootLines
   
         .Checkboxes = True
   
      End With
   
   
   
   ' Fill up the treeview...
   
      For i = 1 To 2
   
         Set Node1 = TreeView1.Nodes.Add(, , , "Root" & i)
   
         For j = 1 To 3
   
            Set Node2 = TreeView1.Nodes.Add(Node1.Index, tvwChild, , _
   
            "Root" & i & "Child" & j)
   
            For k = 1 To 3
   
               Set Node3 = TreeView1.Nodes.Add(Node2.Index, tvwChild, , _
   
                     "GrandChild" & (16 * (i - 1)) + (4 * (j - 1)) + k)
   
            Next k
   
         Next j
   
         Node1.Expanded = True
   
      Next i
   
   End Sub
   
   
   
   Private Sub TreeView1_MouseDown(Button As Integer, Shift As Integer, _
   
                                   x As Single, y As Single)
   
      Dim tvhti As TVHITTESTINFO
   
   
   
       Debug.Print "MouseDown: " & Button & " " & Shift & "  " & _
   
                  x & " " & y
   
   
   
      If (Button = vbLeftButton) Then
   
         ' determine if the mouse pointer is being depressed over the Node's
   
         ' checkbox (assumes that the Form's ScaleMode is set to vbTwips).
   
         tvhti.pt.x = x / Screen.TwipsPerPixelX
   
         tvhti.pt.y = y / Screen.TwipsPerPixelY
   
         If (SendMessage(TreeView1.hWnd, TVM_HITTEST, 0, tvhti)) Then
   
   
   
            If (tvhti.flags And TVHT_ONITEMSTATEICON) Then
   
               ' the value of the Node's Checked property will be toggled
   
               ' *after* this procedure finishes execution.
   
               Set m_nodChecked = TreeView1.HitTest(x, y)
   
            End If
   
   
   
         End If   ' TVM_HITTEST
   
      End If   ' (Button = vbLeftButton)
   
   End Sub
   
   
   
   Private Sub TreeView1_NodeCheck(ByVal Node As MSComctlLib.Node)
   
   
   
      If (Node Is m_nodChecked) Then
   
   
   
         ' Either the left-mouse button is being released over the Node
   
         ' whose checkbox has been toggled, or this event procedure
   
         ' is being called from TreeView1_MouseUp. This *is* where we
   
         ' want to process code...
   
         Debug.Print "NodeCheck: " & m_nodChecked & _
   
         ".Checked = " & m_nodChecked.Checked & _
   
         vbCrLf & vbTab & " (do process code here)"
   
      
   
         ' De-reference the module level Node variable so you don't
   
         ' call this event again in TreeView1_MouseUp.
   
         Set m_nodChecked = Nothing
   
   
   
      Else
   
         ' This event is being raised by the TreeView because the mouse
   
         ' pointer is being released over a node whose checkbox state
   
         ' has *not* been toggled. you do *not* want to process code here...
   
         Debug.Print "NodeCheck: " & Node & _
   
         ".Checked = " & Node.Checked & _
   
         vbCrLf & vbTab & " (do *not* process code here)"
   
   
   
      End If
   
   End Sub
   
   
   
   Private Sub TreeView1_MouseUp(Button As Integer, Shift As Integer, _
   
               x As Single, y As Single)
   
   
   
      If (m_nodChecked Is Nothing) = False Then
   
   
   
         ' You didn't get a NodeCheck event (the variable is still set),
   
         ' the mouse pointer is *not* over the Node whose checkbox
   
         ' state has been toggled. Explicitly call the event procedure.
   
         Call TreeView1_NodeCheck(m_nodChecked)
   
   
   
      End If
   
   
   
         Debug.Print "MouseUp: " & Button & " " & Shift & " " & _
   
                  x & " " & y
   
      End Sub
   
   						

5. Run the program and position the mouse cursor over a checkbox. Press and hold down the left-mouse button, drag the mouse cursor away from the checkbox, and then release the mouse button. Note that a message verifying that the NodeCheck event occurred is printed in the Immediate pane.

Back to the top

STATUS

Microsoft has confirmed that this is a bug in the Microsoft products that are li...

Microsoft has confirmed that this is a bug in the Microsoft products that are listed at the beginning of this article.

Back to the top

MORE INFORMATION

Steps to Reproduce Behavior Open a new Visual Basic Standard Exe project. Form1...

Steps to Reproduce Behavior

1. Open a new Visual Basic Standard Exe project. Form1 is created by default.
2. On the Project menu, click Components. Select Microsoft Common Controls 6.0 and click OK.
3. Add a Treeview control to Form1. Open the Treeview control's property page by right-clicking on the control and clicking Properties. Check the Treeview control's Checkboxes property and click OK.
4. Add the following code to the General Declarations section of Form1:

   Private Sub Form_Load()
   
      Dim Node1 As Node
   
      Dim Node2 As Node
   
      Dim Node3 As Node
   
      Dim i As Integer
   
      Dim j As Integer
   
      Dim k As Integer
   
   
   
   ' For some convenience...
   
      With TreeView1
   
         .HideSelection = False
   
         .Indentation = 19 * Screen.TwipsPerPixelX
   
         .LabelEdit = tvwManual
   
         .LineStyle = tvwRootLines
   
      End With
   
   
   
   ' Fill up the treeview...
   
      For i = 1 To 2
   
         Set Node1 = TreeView1.Nodes.Add(, , , "Root" & i)
   
         For j = 1 To 3
   
            Set Node2 = TreeView1.Nodes.Add(Node1.Index, tvwChild, , _
   
            "Root" & i & "Child" & j)
   
            For k = 1 To 3
   
               Set Node3 = TreeView1.Nodes.Add(Node2.Index, tvwChild, , _
   
               "GrandChild" & (16 * (i - 1)) + (4 * (j - 1)) + k)
   
            Next k
   
         Next j
   
         Node1.Expanded = True
   
      Next i
   
   End Sub
   
   
   
   Private Sub TreeView1_NodeCheck(ByVal Node As MSComctlLib.Node)
   
      Debug.Print "NodeCheck Event"
   
   End Sub
   
    
   
   						

5. Run the program. Position the mouse cursor over a checkbox, press and release the left-mouse button on the checkbox, and note that the message is printed in the Immediate pane.
6. Position the mouse cursor over a checkbox, and press and hold down the left-mouse button. Drag the mouse cursor away from the checkbox and then release the mouse button. Note that no message appears.

Back to the top

http://support.microsoft.com/kb/221557/en-us/