Linux 多线程 - 线程异步与同步机制

I. 同步机制

线程间的同步机制主要包括三个：

互斥锁：
以排他的方式，防止共享资源被并发访问；
互斥锁为二元变量，状态为0-开锁、1-上锁;
开锁必须由上锁的线程执行，不受其它线程干扰.

条件变量：
满足某个特定条件时，可通过条件变量通知其它线程do-something;
必须与互斥锁*联合使用，单独无法执行.

读写锁：
针对多读者，少写者的情况设定
> *   允许**多读**，但此时**不可写**；
>     
> *   **唯一写**，此时**不可读**.

函数的头文件为：

    #include

1. 互斥锁

操作流程：

I. 创建互斥锁

II. 申请锁：若可用，立刻占用；否则，阻塞等待

III. do-something

IV. 释放锁

V. 销毁锁

以下是互斥锁的基本操作函数：

功能	函数	参数	返回值	说明
初始化锁	int pthread_mutex_init(

2. 条件变量

注意，条件变量必须与互斥锁共同使用；

以下是条件变量的基本操作函数：

功能	函数	参数	返回值	说明
初始化锁	int pthread_cond_init(

pthread_cond_t *cond,
const pthread_condattr_t *attr) | 1. cond: 欲建立的条件变量
2.attr:属性，一般为NULL | 成功：0
失败：非零值 | |
| 等待条件变量 | int pthread_cond_wait(
pthread_cond_t *cond,
pthread_mutex_t *mutex) | 1.cond:条件变量
2.mutex:互斥锁 | 成功：0
失败：非零值 | 阻塞等待
隐含释放申请到的互斥锁 |
| 限时等待条件变量 | int pthread_cond_timewait(
pthread_cond_t *cond,
pthread_mutex_t *mutex,
const struct timespec *time) | 3.time:等待过期的绝对时间
从1970-1-1:0:0:0起 | 成功：0
失败：非零值 | struct timespec{long ts_sec;
long ts_nsec} |
| 单一通知 | int pthread_cond_signal(
pthread_cond_t *cond) | cond:条件变量 | 成功：0
失败：非零值 | 唤醒等待cond的第一个线程
隐含获取需要的互斥锁 |
| 广播通知 | int pthread_cond_broadcast(
pthread_cond_t *cond) | cond:条件变量 | 成功：0
失败：非零值 | 唤醒所有等待cond的线程
隐含获取需要的互斥锁 |
| 销毁条件变量 | int pthread_cond_destroy(
pthread_cond_t *cond) | cond:条件变量 | 成功：0
失败：非零值 | |

3. 读写锁

读写基本原则：

若当前线程读数据，则允许其他线程读数据，但不允许写

若当前线程写数据，则不允许其他线程读、写数据

以下是基本的操作：

功能	函数	参数	返回值	说明
初始化锁	int pthread_rwlock_init(

4. 线程信号量

线程信号量类似进程的信号量，主要是使得多个线程访问共享资源时，顺序互斥访问。
与互斥锁的区别在于：

互斥锁：只有一个bool类型的值，只允许2个线程进行排队；

信号量：允许多个线程共同等待一个共享资源

函数如下：

     #include

功能	函数	参数	返回值	说明
创建信号量	int sem_init(sem_t *sem,
int pshared, unsigned int value)	1. sem:信号量地址;

struct timespec {
               time_t tv_sec;      /* Seconds */
               long   tv_nsec;     /* Nanoseconds [0 .. 999999999] */
           };

II. 异步机制 - 信号

线程的异步机制只有信号，类似于线程的信号。

线程信号具备以下特点

任何线程都可以向其它线程(同一进程下)发送信号；

每个线程都具备自己独立的信号屏蔽集，不影响其它线程；

线程创建时，不继承原线程的信号屏蔽集；

同进程下，所有线程共享对某信号的处理方式，即一个设置，所有有效；

多个线程的程序，向某一个线程发送终止信号，则整个进程终止

信号的基本操作如下：

功能	函数	参数	返回值	说明
安装信号	sighandler_t signal(

也可以参考这篇博客：https://www.cnblogs.com/coding-my-life/p/4782529.html

III、示例代码

1.同步机制：

1). 互斥锁：

两个线程：

读线程：从stdin中读取数据，并存储

写线程：从存储buffer中读取数据并显示

#include 
#include 
#include 
#include 
#include 

#define SIZE 128

pthread_mutex_t mutex;
int EXIT = 0;
char word[SIZE];

void * child(void *arg)
{
    while(1)
    {
        while(strlen(word) == 0)
            usleep(100);

        pthread_mutex_lock(&mutex);
        printf("The input words: %s\n", word);
        pthread_mutex_unlock(&mutex);
        if(strcmp("end\n", word) == 0)
        {
            printf("The process end\n");
            EXIT = 1;
            break;
        }

        memset(word, '\0', SIZE);
    }

    return ;
}

int main()
{
    //1\. create the lock
    pthread_mutex_init(&mutex, NULL);

    //2.create a new thread
    pthread_t tid;
    pthread_create(&tid, NULL, (void *)*child, NULL);

    //3\. Input words
    while(EXIT == 0)
    {
        if(strlen(word)!=0)
            usleep(100);
        //add the lock
        else
        {
            pthread_mutex_lock(&mutex);
            printf("Input words:  ");
            fgets(word, SIZE, stdin);
            pthread_mutex_unlock(&mutex);            
        }
    }

    pthread_join(tid, NULL);
    printf("The child has joined\n");
    pthread_mutex_destroy(&mutex);

    return 0;
}

2). 条件变量：

生产者和消费者问题：

生产者:
向仓库生产数据(大小可任意设定)，当满时，阻塞等待仓库有空闲(由消费者消费完后通知)

消费者：
从仓库读数据，若仓库为空，则阻塞等待，当生产者再次生产产品后通知

#include 
#include 
#include 
#include 
#include 

#define SIZE 2
int Data[SIZE];

typedef struct
{
    pthread_mutex_t lock;
    pthread_cond_t  notFull;
    pthread_cond_t  notEmpty;
    int read_point;
    int write_point;
}sCOND;

sCOND *pCondLock;

void init(void)
{
    //memset(pCondLock, 0, sizeof(sCOND));

    //1.Create a mutex lock
    pthread_mutex_init(&pCondLock->lock, NULL);

    //2.Create two condition variable  
    pthread_cond_init(&pCondLock->notFull, NULL);
    pthread_cond_init(&pCondLock->notEmpty, NULL);

    //set the read and write point 0
    pCondLock->read_point = 0;
    pCondLock->write_point = 0;
}

int put(int data) 
{
    //obtain the mutex lock
    pthread_mutex_lock(&pCondLock->lock);

    //check the global variable Data full or not
    while((pCondLock->write_point+1)%SIZE == pCondLock->read_point)
    {
        printf("The buf is full, waitting for not_full signal\n");
        pthread_cond_wait(&pCondLock->notFull, &pCondLock->lock);
    }       

    //write the data to buffer
    Data[pCondLock->write_point] = data;
    pCondLock->write_point++;
    if(pCondLock->write_point == SIZE)
        pCondLock->write_point = 0;

    //unlock the mutex lock 
    pthread_mutex_unlock(&pCondLock->lock);

    //wake up the not_empty signal
    pthread_cond_signal(&pCondLock->notEmpty);

    return 0;
}

int get(int *data) 
{
    //obtain the mutex lock
    pthread_mutex_lock(&pCondLock->lock);

    //check the global variable Data empty or not
    while(pCondLock->write_point == pCondLock->read_point)
    {
        printf("The buf is empty, waitting for not_empty signal\n");
        pthread_cond_wait(&pCondLock->notEmpty, &pCondLock->lock);
    }       

    //read the data from buffer
    *data = Data[pCondLock->read_point];
    pCondLock->read_point++;
    if(pCondLock->read_point == SIZE)
        pCondLock->read_point = 0;

    //wake up the not_empty signal
    pthread_cond_signal(&pCondLock->notFull);

    pthread_mutex_unlock(&pCondLock->lock);

    return *data;
}

void *produce(void)
{
    int times=0;
    //1\. first 5 times, every second write a data to buffer
    for(times=0; times < 5; times++)
    {
        sleep(1);
        put(times+1);
        printf("Input date=%d\n", times+1);
    }

    //2\. last 5 times, every 3 seconds write a data to buffer 
    for(times = 5; times < 10; times++)
    {
        sleep(3);
        put(times+1);
        printf("Input date=%d\n", times+1);
    }
}

void *consume(void)
{
    int times=0;
    int data=0;
    //10 times, every 2 seconds read the buffer
    for(times = 0; times < 10; times++)
    {
        sleep(2);
        data = get(&data);
        printf("The data is %d\n", data);
    }
}

int main()
{
    pthread_t tid1, tid2;

    pCondLock = malloc(sizeof(sCOND));
    memset(pCondLock, '\0', sizeof(sCOND));
    //1.init the struct of sCondLock 
    init();

    //2\. start two threads
    pthread_create(&tid1, NULL, (void*)*produce, NULL);
    pthread_create(&tid2, NULL, (void*)*consume, NULL);

    pthread_join(tid1, NULL);
    pthread_join(tid2, NULL);

    free(pCondLock);

    return 0;
}

3). 读写锁：

四个线程：两读两写；

多进程可同时读，但此时不可写；
只有一个线程可写，其它线程等待该线程写完后执行响应的读/写操作

#include 
#include 
#include 
#include 
#include 

#define BUF_SIZE 128

char buf[BUF_SIZE];

pthread_rwlock_t rwlock;

int time_to_exit = 0;

void *read_first(void *arg);
void *read_second(void *arg);
void *write_first(void *arg);
void *write_second(void *arg);

int main()
{
    pthread_t tid_rd1, tid_rd2;
    pthread_t tid_wr1, tid_wr2;

    //1.create a read-write-lock
    int ret = pthread_rwlock_init(&rwlock, NULL);
    if(ret != 0)
    {
        perror("pthread_rwlock_init");
        exit(EXIT_FAILURE);
    }

    //2\. Create the read and write threads
    ret = pthread_create(&tid_rd1, NULL, (void *)*read_first, NULL);
    if(ret != 0)
    {
        perror("pthread_create");
        exit(EXIT_FAILURE);
    }

    ret = pthread_create(&tid_rd2, NULL, (void *)*read_second, NULL);
    if(ret != 0)
    {
        perror("pthread_create");
        exit(EXIT_FAILURE);
    }

    ret = pthread_create(&tid_wr1, NULL, (void *)*write_first, NULL);
    if(ret != 0)
    {
        perror("pthread_create");
        exit(EXIT_FAILURE);
    }

    ret = pthread_create(&tid_wr2, NULL, (void *)*write_second, NULL);
    if(ret != 0)
    {
        perror("pthread_create");
        exit(EXIT_FAILURE);
    }

    //3\. wait for the threads finish
    pthread_join(tid_rd1, NULL);
    pthread_join(tid_rd2, NULL);
    pthread_join(tid_wr1, NULL);
    pthread_join(tid_wr2, NULL);

    //4\. delete the read-write-lock
    pthread_rwlock_destroy(&rwlock);

    return 0;
}

/***************************************************/
// Write threads
void *write_first(void *arg)
{
    while(!time_to_exit)
    {
        sleep(5);

        //1\. get the read-lock    
        pthread_rwlock_wrlock(&rwlock);
        printf("\nThis is thread write_first!\n");

        printf("Pls input the string: ");
        fgets(buf, BUF_SIZE, stdin);

        pthread_rwlock_unlock(&rwlock);
    }

    printf("Exit the write_first!\n");
    pthread_exit(0);
}

void *write_second(void *arg)
{
    while(!time_to_exit)
    {
        sleep(10);

        //1\. get the read-lock    
        pthread_rwlock_wrlock(&rwlock);
        printf("\nThis is thread write_second!\n");

        printf("Pls input the string: ");
        fgets(buf, BUF_SIZE, stdin);

        pthread_rwlock_unlock(&rwlock);
    }

    printf("Exit the write_second!\n");
    pthread_exit(0);
}

//-----2\. read the threads
void *read_first(void *arg)
{
    while(1)
    {
        sleep(5);
        pthread_rwlock_rdlock(&rwlock);
        printf("\nThis is thread read_first\n");

        //if write an string of "end"
        if(!strncmp("end", buf, 3))
        {
            printf("Exit the read_first!\n");
            break;
        }

        //if nothing in the BUFFER
        while(strlen(buf) == 0)
        {
            pthread_rwlock_unlock(&rwlock);
            sleep(2);
            pthread_rwlock_rdlock(&rwlock);
        }

        //output the string in BUFFER
        printf("The string is: %s\n", buf);

        pthread_rwlock_unlock(&rwlock);
    }

    pthread_rwlock_unlock(&rwlock);

    //make the exit true
    time_to_exit = 1;

    pthread_exit(0);
}

void *read_second(void *arg)
{
    while(1)
    {
        sleep(4);

        pthread_rwlock_rdlock(&rwlock);
        printf("\nThis is thread read_second\n");

        //if write an string of "end"
        if(!strncmp("end", buf, 3))
        {
            printf("Exit the read_second!\n");
            break;
        }

        //if nothing in the BUFFER
        while(strlen(buf) == 0)
        {
            pthread_rwlock_unlock(&rwlock);
            sleep(2);
            pthread_rwlock_rdlock(&rwlock);
        }

        //output the string in BUFFER
        printf("The string is: %s\n", buf);

        pthread_rwlock_unlock(&rwlock);
    }

    pthread_rwlock_unlock(&rwlock);

    //make the exit true
    time_to_exit = 1;

    pthread_exit(0);
}

2. 异步机制 - 信号：

本程序包括两个线程：

线程1安装SIGUSR1,阻塞除SIGUSR2外的所有信号；

线程2安装SIGUSR2,不阻塞任何信号

操作流程：

1- 线程1、2安装信号；

2- 主线程发送SIGUSR1和SIGUSR2至线程1和线程2；

3- 线程1接收到除SIGUSR2之外的信号，阻塞不执行；当收到SIGUSR2后，执行对应操作；

4- 线程2接收到SIGUSR1和SIGUSR2后，分别执行对应操作

5- 主线程发送SIGKILL信号，结束整个进程

#include 
#include 
#include 
#include 
#include 
#include 

void *th_first(void *arg);

void *th_second(void *arg);

pthread_t tid1, tid2;

void handler(int signo)
{
    printf("In handler: tid_%s, signo=%d\n", ((pthread_self() == tid1)?"first":"second"), signo);
}

int main()
{
    int ret = 0;
    //1. create first thread
    ret = pthread_create(&tid1, NULL, (void *)*th_first, NULL);
    if(0 !=ret)
    {
        perror("pthread_create");
        exit(EXIT_FAILURE);
    }
    //2. create second thread
    ret = pthread_create(&tid2, NULL, (void *)*th_second, NULL);
    if(0 !=ret)
    {
        perror("pthread_create");
        exit(EXIT_FAILURE);
    }

    sleep(2);
    //3. send the signal of SIG_USER1 and SIG_USER2 to thread_first
    ret = pthread_kill(tid1, SIGUSR1);
    if(0 !=ret)
    {
        perror("pthread_kill");
        exit(EXIT_FAILURE);
    }

    ret = pthread_kill(tid1, SIGUSR2);
    if(0 !=ret)
    {
        perror("pthread_kill");
        exit(EXIT_FAILURE);
    }

    //4. send the signal of SIG_USER1 and SIG_USER2 to thread_second_
    sleep(1);
    ret = pthread_kill(tid2, SIGUSR1);
    if(0 !=ret)
    {
        perror("pthread_kill");
        exit(EXIT_FAILURE);
    }

    ret = pthread_kill(tid2, SIGUSR2);
    if(0 !=ret)
    {
        perror("pthread_kill");
        exit(EXIT_FAILURE);
    }

    sleep(1);
    //5. send SIGKILL to all threads
    ret = pthread_kill(tid1, SIGKILL);
    if(0 !=ret)
    {
        perror("pthread_kill");
        exit(EXIT_FAILURE);
    }

    pthread_join(tid1, NULL);
    pthread_join(tid2, NULL);

    return 0;
}

void *th_first(void *arg)
{
    //1. Add SIGUSR1 signal
    signal(SIGUSR1, handler);

    //2. Set the sinagl set
    sigset_t set;
    sigfillset(&set);                           //init set to be full, include all signal
    sigdelset(&set, SIGUSR2);                   //delete the SIGUSR2 from the set variable
    pthread_sigmask(SIG_SETMASK, &set, NULL);   //set the current mask set to be defined set variable

    //3. Circular wait the signal
    int i;
    for(i=0; i<5; i++)
    {
        printf("\nThis is th_first, tid=%#x\n ", pthread_self());
        pause();
    }
}

void *th_second(void *arg)
{
    usleep(100);
    //1. Add the signal of SIGUSR2
    signal(SIGUSR2, handler);

    //2. Circular wait the signal
    int i;
    for(i=0; i<5; i++)
    {
        printf("\nThis is th_second, tid=%#x\n", pthread_self());
        pause();
    }
}

Linux 多线程 - 线程异步与同步机制

Linux 多线程 - 线程异步与同步机制

I. 同步机制

1. 互斥锁

2. 条件变量

3. 读写锁

4. 线程信号量

II. 异步机制 - 信号

III、示例代码

1.同步机制：

1). 互斥锁：

2). 条件变量：

3). 读写锁：

2. 异步机制 - 信号：

你可能感兴趣的:(Linux 多线程 - 线程异步与同步机制)