Pytorch构建ResNet-50V2
-
本文为365天深度学习训练营 中的学习记录博客
-
参考文章地址： 365天深度学习训练营-第J2周：ResNet-50V2算法实战与解析
-
作者：K同学啊
一、ResNetV2与ResNet结构对比
改进点
(a)original 表示原始的 ResNet 的残差结构，(b)proposed 表示新的 ResNet 的残差结构。主要差别就是(a)结构先卷积后进行 BN 和激活函数计算，最后执行 addition 后再进行ReLU 计算； (b)结构先进行 BN 和激活函数计算后卷积，把 addition 后的 ReLU 计算放到了残差结构内部。
改进结果
作者使用这两种不同的结构在 CIFAR-10 数据集上做测试，模型用的是 1001层的 ResNet 模型。从图中结果我们可以看出，(b)proposed 的测试集错误率明显更低一些，达到了 4.92%的错误率，(a)original 的测试集错误率是 7.61%
二、模型实现
2.1 残差结构
''' Residual Block '''
class Block2(nn.Module):
def __init__(self, in_channel, filters, kernel_size=3, stride=1, conv_shortcut=False):
super(Block2, self).__init__()
self.preact = nn.Sequential(
nn.BatchNorm2d(in_channel),
nn.ReLU(True)
)
self.shortcut = conv_shortcut
if self.shortcut:
self.short = nn.Conv2d(in_channel, 4*filters, 1, stride=stride, padding=0, bias=False)
elif stride>1:
self.short = nn.MaxPool2d(kernel_size=1, stride=stride, padding=0)
else:
self.short = nn.Identity()
self.conv1 = nn.Sequential(
nn.Conv2d(in_channel, filters, 1, stride=1, bias=False),
nn.BatchNorm2d(filters),
nn.ReLU(True)
)
self.conv2 = nn.Sequential(
nn.Conv2d(filters, filters, kernel_size, stride=stride, padding=1, bias=False),
nn.BatchNorm2d(filters),
nn.ReLU(True)
)
self.conv3 = nn.Conv2d(filters, 4*filters, 1, stride=1, bias=False)
def forward(self, x):
x1 = self.preact(x)
if self.shortcut:
x2 = self.short(x1)
else:
x2 = self.short(x)
x1 = self.conv1(x1)
x1 = self.conv2(x1)
x1 = self.conv3(x1)
x = x1 + x2
return x2.2 模块构建
class Stack2(nn.Module):
def __init__(self, in_channel, filters, blocks, stride=2):
super(Stack2, self).__init__()
self.conv = nn.Sequential()
self.conv.add_module(str(0), Block2(in_channel, filters, conv_shortcut=True))
for i in range(1, blocks-1):
self.conv.add_module(str(i), Block2(4*filters, filters))
self.conv.add_module(str(blocks-1), Block2(4*filters, filters, stride=stride))
def forward(self, x):
x = self.conv(x)
return x2.3 网络构建
''' 构建ResNet50V2 '''
class ResNet50V2(nn.Module):
def __init__(self,
include_top=True, # 是否包含位于网络顶部的全链接层
preact=True, # 是否使用预激活
use_bias=True, # 是否对卷积层使用偏置
input_shape=[224, 224, 3],
classes=1000,
pooling=None): # 用于分类图像的可选类数
super(ResNet50V2, self).__init__()
self.conv1 = nn.Sequential()
self.conv1.add_module('conv', nn.Conv2d(3, 64, 7, stride=2, padding=3, bias=use_bias, padding_mode='zeros'))
if not preact:
self.conv1.add_module('bn', nn.BatchNorm2d(64))
self.conv1.add_module('relu', nn.ReLU())
self.conv1.add_module('max_pool', nn.MaxPool2d(kernel_size=3, stride=2, padding=1))
self.conv2 = Stack2(64, 64, 3)
self.conv3 = Stack2(256, 128, 4)
self.conv4 = Stack2(512, 256, 6)
self.conv5 = Stack2(1024, 512, 3, stride=1)
self.post = nn.Sequential()
if preact:
self.post.add_module('bn', nn.BatchNorm2d(2048))
self.post.add_module('relu', nn.ReLU())
if include_top:
self.post.add_module('avg_pool', nn.AdaptiveAvgPool2d((1, 1)))
self.post.add_module('flatten', nn.Flatten())
self.post.add_module('fc', nn.Linear(2048, classes))
else:
if pooling=='avg':
self.post.add_module('avg_pool', nn.AdaptiveAvgPool2d((1, 1)))
elif pooling=='max':
self.post.add_module('max_pool', nn.AdaptiveMaxPool2d((1, 1)))
def forward(self, x):
x = self.conv1(x)
x = self.conv2(x)
x = self.conv3(x)
x = self.conv4(x)
x = self.conv5(x)
x = self.post(x)
return x三、鸟类数据集效果
数据集可视化：
后三个epoch：
Epoch:18, Train_acc:92.9%, Train_loss:0.210, Test_acc:84.1%，Test_loss:0.538 Epoch:19, Train_acc:94.9%, Train_loss:0.160, Test_acc:89.4%，Test_loss:0.484 Epoch:20, Train_acc:92.7%, Train_loss:0.270, Test_acc:82.3%，Test_loss:0.700 Done best_acc： 0.9491150442477876
Loss与Accuracy图：
指定图片预测：
