1. 用户视图下可以执行的命令
Router>?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
clear Reset functions
connect Open a terminal connection
credential load the credential info from file system
crypto Encryption related commands.
disable Turn off privileged commands
disconnect Disconnect an existing network connection
do-exec Mode-independent "do-exec" prefix support
enable Turn on privileged commands
ethernet Ethernet parameters
exit Exit from the EXEC
help Description of the interactive help system
ips Intrusion Prevention System
lat Open a lat connection
lig LISP Internet Groper
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
modemui Start a modem-like user interface
mrinfo Request neighbor and version information from a multicast
router
mstat Show statistics after multiple multicast traceroutes
mtrace Trace reverse multicast path from destination to source
name-connection Name an existing network connection
pad Open a X.29 PAD connection
ping Send echo messages
ppp Start IETF Point-to-Point Protocol (PPP)
release Release a resource
renew Renew a resource
resume Resume an active network connection
rlogin Open an rlogin connection
set Set system parameter (not config)
show Show running system information
slip Start Serial-line IP (SLIP)
ssh Open a secure shell client connection
systat Display information about terminal lines
tclquit Quit Tool Command Language shell
telnet Open a telnet connection
terminal Set terminal line parameters
tn3270 Open a tn3270 connection
traceroute Trace route to destination
tunnel Open a tunnel connection
udptn Open an udptn connection
waas IOS Wide Area Application Services
where List active connections
x28 Become an X.28 PAD
x3 Set X.3 parameters on PAD
2. enable视图下执行的命令
Router>enable
Router#?
Exec commands:
access-enable Create a temporary Access-List entry
access-profile Apply user-profile to interface
access-template Create a temporary Access-List entry
alps ALPS exec commands
archive manage archive files
audio-prompt load ivr prompt
auto Exec level Automation
beep Blocks Extensible Exchange Protocol commands
bfe For manual emergency modes setting
calendar Manage the hardware calendar
call Voice call
ccm-manager Call Manager Application exec commands
cd Change current directory
clear Reset functions
clock Manage the system clock
cns CNS agents
configure Enter configuration mode
connect Open a terminal connection
copy Copy from one file to another
credential load the credential info from file system
crypto Encryption related commands.
3. 特权视图
Router#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#?
Configure commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
alias Create command alias
alps Configure Airline Protocol Support
appfw Configure the Application Firewall policy
application Define application
archive Archive the configuration
arp Set a static ARP entry
async-bootp Modify system bootp parameters
authentication Auth Manager Global Configuration Commands
auto Configure Automation
backhaul-session-manager Configure Backhaul Session Manager
banner Define a login banner
bba-group Configure BBA Group
beep Configure BEEP (Blocks Extensible Exchange
Protocol)
bfd BFD configuration commands
bfd-template BFD template configuration
boot Modify system boot parameters
bridge Bridge Group.
bstun BSTUN global configuration commands
buffers Adjust system buffer pool parameters
busy-message Display message when connection to host fails
call Configure Call parameters
call-history-mib Define call history mib parameters
call-manager-fallback SRST for Cisco Call Manager fallback. For Cisco
Unified Communications Manager Express
configuration use the 'telephony-service' command
capf-server CAPF Server
carrier-id Name of the carrier associated with this trunk
group
ccm-manager Call Manager
cdp Global CDP configuration subcommands
cef Cisco Express Forwarding
chat-script Define a modem chat script
class-map Configure CPL Class Map
clns Global CLNS configuration subcommands
clock Configure time-of-day clock
cns CNS agents
config-register Define the configuration register
configuration Configuration access
connect cross-connect two interfaces
content-scan Content-Scan
control-plane Configure control plane services
credentials credentials service
crypto Encryption module
csdb Common Session Database
ctl-client CTL Client
cts Cisco Trusted Security commands
dcm Enter Data Collection Manager Mode
decnet Global DECnet configuration subcommands
default Set a command to its defaults
default-value Default character-bits values
define interface range macro definition
dial-control-mib Define Dial Control Mib parameters
dial-peer Dial Map (Peer) configuration commands
dialer Dialer commands
dialer-list Create a dialer list entry
dlsw Data Link Switching global configuration commands
dnsix-dmdp Provide DMDP service for DNSIX
dnsix-nat Provide DNSIX service for audit trails
do-exec To run exec commands in config mode
dot1x IEEE 802.1X Global Configuration Commands
downward-compatible-config Generate a configuration compatible with older
software
dspfarm Enable the dspfarm service
dspu DownStream Physical Unit Command
eap EAP Global Configuration Commands
enable Modify enable password parameters
end Exit from configure mode
eou EAPoUDP Global Configuration Commands
ephone-type define ethernet phone type
epm EPM Global Configuration Commands
ethernet Ethernet configuration
event Event related configuration commands
exception Exception handling
exit Exit from configure mode
fhrp Configure First Hop Redundancy Protocols
file Adjust file system parameters
flow Global Flow configuration subcommands
flow-sampler-map Flow sampler configuration
format Format the output
frame-relay global frame relay configuration commands
gateway Gateway
global-address-family Enter address-family base routing topology mode
gw-accounting Enable voip gateway accounting.
help Description of the interactive help system
hostname Set system's network name
http HTTP Config
ida-client IDA Client provides infra for communication with
IDA on cisco server
identity Identity Configuration Commands
interface Select an interface to configure
ip Global IP configuration subcommands
ipc Configure IPC system
iphc-profile Configure IPHC profile
ipv6 Global IPv6 configuration commands
isis Global ISIS configuration subcommands
iua Configure ISDN user Adaptation Layer
ivr ivr utility command
ixi IXI Config command
kerberos Configure Kerberos
key Key management
keymap Define a new keymap
kron Kron interval Facility
l2 Layer 2 configuration
Layer 2 Tunneling Protocol (L2TP) parameters
-class -class configuration
l3 l3 encapsulation ip commands
lat DEC Local Area Transport (LAT) transmission
protocol
li-view LI View
line Configure a terminal line
lldp Global LLDP configuration subcommands
locaddr-priority-list Establish queueing priorities based on LU address
logging Modify message logging facilities
login Enable secure login checking
login-string Define a host-specific login string
mab MAC Authentication Bypass Global Configuration
Commands
mace Measurement Aggregation and Correlation Engine
map-class Configure static map class
map-list Configure static map list
media-proxy Global media proxy configuration
mediatrace Mediatrace Application
memory Configure memory management
menu Define a user-interface menu
metadata Metadata Application
microcode configure microcode
mmi Configure mmi for auto provisioning
modemcap Modem Capabilities database
monitor Monitoring different system events
mop Configure the DEC MOP Server
mpls Configure MPLS parameters
multilink PPP multilink global configuration
ncia Native Client Interface Architecture
netbios NETBIOS access control filtering
netconf Configure NETCONF
no Negate a command or set its defaults
ntp Configure NTP
num-exp Dial Map Number Expansion configuration commands
object-group Configure ACL Object Group
parameter-map parameter map
parser Configure parser
password Configure encryption password (key)
per-call Per call debug
pfr Performance Routing configuration submodes
pfr-map Create pfr-map and enter pfr-map command mode
policy-map Configure Policy Map
ppp PPP global configuration
printer Define an LPD printer
privilege Command privilege parameters
process Configure process
process-max-time Maximum time for process to run before
voluntarily relinquishing processor
profile MSP Profile
prompt Set system's prompt
pseudowire-class Pseudowire-class configuration
qos Global QoS configuration subcommands
rbe Commands for Routing RFC 1483 Ethernet
encapsulated packets
redundancy Enter redundancy mode
regexp regexp commands
resource Configure Embedded Resource Manager (ERM)
resume-string Define a host-specific resume string
rif Source-route RIF cache
rlogin Rlogin configuration commands
rmon Remote Monitoring
route-map Create route-map or enter route-map command mode
route-tag Route Tag
router Enable a routing process
rsrb RSRB LSAP/DSAP filtering
sampler Define a Sampler
sap-priority-list Establish queueing priorities based on SAP and/or
MAC address(es)
sasl Configure SASL
sccp Enable Skinny Client Control Protocol
scheduler Scheduler parameters
scripting Configure options for scripting languages
secure Secure image and configuration archival commands
security Infra Security CLIs
service Modify use of network based services
service-routing Configure service-routing
shell Configure shell command
signaling-class Configure signaling class
sip-ua SIP User Agent (UA)
sna Network Management Physical Unit Command
snmp Modify non engine SNMP parameters
snmp-server Modify SNMP engine parameters
source-bridge Source-route bridging ring groups
spanning-tree Spanning Tree Subsystem
stackmaker Specify stack name and add its member
stacks Configure stacks
standby Global HSRP configuration commands
state-machine Define a TCP dispatch state machine
stun STUN global configuration commands
subscriber Subscriber configuration
subscriber-policy Subscriber policy
subscription ASNL based Subscriptions configuration
table-map Configure Table Map
tacacs-server Modify TACACS query parameters
tarp Global TARP configuration subcommands
telephony-service Configure Cisco Unified Communications Manager
Express
template Select a template to configure
terminal-queue Terminal queue commands
tftp-server Provide TFTP service for netload requests
tgrep Enable TGREP
time-range Define time range entries
tn3270 tn3270 configuration command
track Object tracking configuration commands
translate Translate global configuration commands
translation-rule Global digit manipulation and translation
trunk Global trunk configuration
ttycap Define a new termcap
user-group User Group Configuration Commands
username Establish User Name Authentication
vc-group Define a Frame Relay VC group
virtual-profile Virtual Profile configuration
virtual-template Virtual Template configuration
vlan VLAN commands
vm-integration enable in-band DTMF integration with voicemail
systems
voice Global voice configuration
voice-card Configure a specific voice-card
voicecap Add a voicecap entry
voip-incoming Global incoming VoIP configuration
vpdn Virtual Private Dialup Network
vpdn-group VPDN group configuration
vpdn-template vpdn-template configuration
vrf VRF commands
vty-async Enable virtual async line configuration
waas IOS Wide Area Application Services
wsma Configure Web Services Management Agents
x25 X.25 Level 3
x29 X29 commands
xconnect Xconnect config commands
xot Global XOT commands
xsm Configure XSM
zone FW with zoning
zone-pair Zone pair command