1 -指令reboot , warm
图片.png
2 -断电后重新上电, cold
图片.png
3 -拔插dp, box重启
图片.png
3.1 插入Type-C设备，手机重启
<6>[ 1.857048] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
<6>[ 1.872786] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
<6>[ 1.893516] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
<6>[ 1.903400] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
<6>[ 1.918066] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: N/A
如果手机瞬间掉电： log
<4>[ 1.839174] soc:usb_nop_phy supply vcc not found, using dummy regulator
<6>[ 1.846359] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from SMPL (sudden momentary power loss) and 'cold' boot
<6>[ 1.862072] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Unknown power-off reason
<6>[ 1.873070] input: qpnp_pon as /devices/virtual/input/input0
<6>[ 1.879492] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
<6>[ 1.889388] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
<6>[ 1.904049] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from UVLO (Under Voltage Lock Out)
<6>[ 1.918876] media: Linux media interface: v0.10
4-GP_FAULT1 过电流保护
<6>[ 1.840807] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
<6>[ 1.855408] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from GP_FAULT1
<6>[ 1.867952] input: qpnp_pon as /devices/virtual/input/input0
<6>[ 1.874392] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
<6>[ 1.884269] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
<6>[ 1.898937] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: N/A