linux dhcpv6有状态配置,翻译：IPv6地址自动配置：有状态和无状态的区别

the Difference Between Stateful and Stateless DHCP

关键字：IPv6 IPv4 IP DHCP DHCPv6 autoconf IPv6地址 自动分配 自动配置 有状态 无状态 stateful stateless

Well, instead of me just jumping right into explaining the difference between Stateful and Stateless DHCP. I’m going to slow down just a bit and briefly explain DHCP first.

DHCP stands for Dynamic Host Configuration Protocol, this client / server protocol has been around for awhile now, and is regually implemented on IPv4 networks. IPv4 DHCP, is explained in RFC 2131 and IPv6 DHCP is explained in RFC 3315. But, in a nutshell; network adminstrators use DHCP to provide a framework that is used by networked devices (DHCP clients) to obtain various necessary parameters from DHCP Servers so the DHCP clients can operate in an Internet Protocol (IP) network. Now when it comes to DHCP for IPv6 (RFC 3315), there are two ways DHCPv6 can be implemented, either Stateful or Stateless.

Statef