MySQL的性能调优工具

使用非常简单：
wget http://www.day32.com/MySQL/tuning-primer.sh
chmod +x tuning-primer.sh
./tuning-primer.sh

和mysqlreport一样，tuning-primer.sh也支持.my.cnf
[client]
user = USERNAME
password = PASSWORD
socket = /tmp/mysql.sock
样例输出：在终端上按照问题重要程度分别用黄色/红色字符标记问题
– MYSQL PERFORMANCE TUNING PRIMER –

• By: Matthew Montgomery -
  MySQL Version 5.0.45 i686

Uptime = 19 days 8 hrs 32 min 54 sec
Avg. qps = 0
Total Questions = 264260
Threads Connected = 1

Server has been running for over 48hrs.
It should be safe to follow these recommendations

To find out more information on how each of these
runtime variables effects performance visit:
http://dev.mysql.com/doc/refman/5.0/en/server-system-variables.html
Visit http://www.mysql.com/products/enterprise/advisors.html
for info about MySQL's Enterprise Monitoring and Advisory Service

SLOW QUERIES
The slow query log is NOT enabled.
Current long_query_time = 10 sec.
You have 0 out of 264274 that take longer than 10 sec. to complete
Your long_query_time may be too high, I typically set this under 5 sec.

BINARY UPDATE LOG
The binary update log is NOT enabled.
You will not be able to do point in time recovery
See http://dev.mysql.com/doc/refman/5.0/en/point-in-time-recovery.html

WORKER THREADS
Current thread_cache_size = 0
Current threads_cached = 0
Current threads_per_sec = 1
Historic threads_per_sec = 0
Your thread_cache_size is fine

MAX CONNECTIONS
Current max_connections = 100
Current threads_connected = 1
Historic max_used_connections = 33
The number of used connections is 33% of the configured maximum.
Your max_connections variable seems to be fine.

MEMORY USAGE
Max Memory Ever Allocated : 96 M
Configured Max Per-thread Buffers : 268 M
Configured Max Global Buffers : 7 M
Configured Max Memory Limit : 276 M
Physical Memory : 1.97 G
Max memory limit seem to be within acceptable norms

KEY BUFFER
Current MyISAM index space = 8 M
Current key_buffer_size = 7 M
Key cache miss rate is 1 : 1817
Key buffer fill ratio = 6.00 %
Your key_buffer_size seems to be too high.
Perhaps you can use these resources elsewhere

QUERY CACHE
Query cache is supported but not enabled
Perhaps you should set the query_cache_size

SORT OPERATIONS
Current sort_buffer_size = 2 M
Current read_rnd_buffer_size = 256 K
Sort buffer seems to be fine

JOINS
Current join_buffer_size = 132.00 K
You have had 0 queries where a join could not use an index properly
Your joins seem to be using indexes properly

OPEN FILES LIMIT
Current open_files_limit = 1024 files
The open_files_limit should typically be set to at least 2x-3x
that of table_cache if you have heavy MyISAM usage.
Your open_files_limit value seems to be fine

TABLE CACHE
Current table_cache value = 64 tables
You have a total of 125 tables
You have 64 open tables.
Current table_cache hit rate is 9%, while 100% of your table cache is in use
You should probably increase your table_cache

TEMP TABLES
Current max_heap_table_size = 16 M
Current tmp_table_size = 32 M
Of 564 temp tables, 6% were created on disk
Effective in-memory tmp_table_size is limited to max_heap_table_size.
Created disk tmp tables ratio seems fine

TABLE SCANS
Current read_buffer_size = 128 K
Current table scan ratio = 1 : 1
read_buffer_size seems to be fine

TABLE LOCKING
Current Lock Wait ratio = 0 : 264392
Your table locking seems to be fine
更有用是作者总结的处理MySQL性能问题处理的优先级：尤其是头3条，基本上可以解决大部分瓶颈问题的原因。

Slow Query Log 慢查询 尤其是like操作，性能杀手，轻易不要使用，让全文索引交给Lucene或者利用Tag机制减少like操作；

Max Connections 并发连接数：一个MySQL deamon缺省最大连接数是100，调到更高只是为了出现问题是给我们更多的缓冲时间而不是任其一直处于那么高的状态，并发连接数类似于等候大厅：当等候人数过多的时候，一味扩大等候厅不是根本解决问题的办法，提高业务的处理速度，多开几个窗口才是更好的解决方法；我的经验就是超过100： 数据就要想办法（镜像或者分片）分布到更多Deamon上；

Worker Threads： Jeremy Zawondy 曾在部落格上說到：Thread caching 並不是我們最需要關心的問題，但當你解決了所有其他更嚴重的問題之後，它就會是最嚴重的問題。(thread caching really wasn't the worst of our problems. But it became the worst after we had fixed all the bigger ones.)

Key Buffer

Query Cache

Sort Buffer

Joins

Temp Tables 临时表

Table (Open & Definition) Cache 表缓存；

Table Locking 表锁定

Table Scans (read_buffer)

Innodb Status

其他一些工具：
1 mytop： 一个top like的show processlist;
2 使用cacti做MySQL的监控：推荐配置模板；
3 把binlog导出成文本和slowquery的格式几乎是一样的，调用mysqlslowquery脚本分析，有时候也会有意外收获