网络打印机安装脚本（rundll32 printui.dll,PrintUIEntry用法示例）

<iframe align="top" marginwidth="0" marginheight="0" src="http://www.zealware.com/46860.html" frameborder="0" width="468" scrolling="no" height="60"></iframe>

先将以下代码保存成为Add_Printer_Port.reg文件，用于创建网络打印机使用的标准TCP/IP端口：

WindowsRegistryEditorVersion 5.00

[HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Print Monitors StandardTCP / IPPort Ports]
" StatusUpdateInterval " = dword:0000000a
" StatusUpdateEnabled " = dword: 00000001

[HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Print Monitors StandardTCP / IPPort Ports IP_10.xx.xx.xx ]
" Protocol " = dword: 00000001
" Version " = dword: 00000001
" HostName " = ""
" IPAddress " = " 10.xx.xx.xx "
" HWAddress " = ""
" PortNumber " = dword:0000238c
" SNMPCommunity " = " public "
" SNMPEnabled " = dword: 00000001
" SNMPIndex " = dword: 00000001

然后使用rundll32 printui.dll,PrintUIEntry的方法可以为客户端安装网络打印机，驱动程序位于客户端可以访问的网络路径上，参考以下示例：

REM #*************************************************************************************
REM #
REM #ModifiedbyAcerforYKPrinterhpLaserJet1300PSinDec062005
REM #使用此脚本需要本地安装驱动的权限
REM #
REM #*************************************************************************************

@echo off

cls
echo Pleaselog on asadministratorto run thisscript .
echo Pressanykeyor use Ctrl + Ctoterminatethescriptandlog on asadministrator .
pause

echo .
echo ImportStandardTCP / IPPortregisterinfo
regedit / sAdd_Printer_Port . reg

echo .
echo Aftermakingchangestotheregistry , theSpoolerservicemustberestarted for thenewportstobeavailable .
net stopspooler& net start spooler

REM #*************************************************************************************
REM #
REM #/ia用inf文件安装打印机驱动程序
REM #/if用inf文件安装打印机
REM #/b[name]基本打印机名
REM #/c[name]如果操作在远程机器上，unc机器名
REM #/dl删除本地打印机
REM #/dn删除网络打印机连接
REM #/dd删除打印机驱动程序
REM #/f[file]inf文件或输出文件
REM #/h[arch]驱动程序体系结构，为下列之一:Alpha|Intel|IA64
REM #/m[model]打印机驱动程序型号名
REM #/n[name]打印机名
REM #/v[version]驱动程序版本属于下列中的一个:Windows95、98和ME|WindowsNT4.0|WindowsNT4.0或2000|Windows2000或XP|WindowsXP
REM #/q安静模式，不显示错误信息
REM #/r[port]端口名
REM #/y将打印机设为默认打印机
REM #/z不要自动共享这台打印机
REM #/Z共享这台打印机，只能跟/if选项一起使用
REM #
REM #
REM #更多的帮助请使用rundll32printui.dll,PrintUIEntry/?
REM #
REM #*************************************************************************************

echo RemoveexistingPrinterwiththesameNametoavoidgetting copy after copy
rundll32printui . dll , PrintUIEntry / dl / n " hpLaserJet1300PS " / q

echo .
echo InstallinghpLaserJet 1300 PSPrinter ......
rundll32printui . dll , PrintUIEntry / if / b " hpLaserJet1300PS " / f " \MyServerPrintDrivershp1300Nlj1300pswin2kxp-schp1300mp.inf " / r " IP_10.xx.xx.xx " / m " hpLaserJet1300PS " / z

Trackback: http://tb.blog.csdn.net/TrackBack.aspx?PostId=1135888